summaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2019-05-17Merge tag 'for-5.2/block-post-20190516' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+1
Pull more block updates from Jens Axboe: "This is mainly some late lightnvm changes that came in just before the merge window, as well as fixes that have been queued up since the initial pull request was frozen. This contains: - lightnvm changes, fixing race conditions, improving memory utilization, and improving pblk compatability (Chansol, Igor, Marcin) - NVMe pull request with minor fixes all over the map (via Christoph) - remove redundant error print in sata_rcar (Geert) - struct_size() cleanup (Jackie) - dasd CONFIG_LBADF warning fix (Ming) - brd cond_resched() improvement (Mikulas)" * tag 'for-5.2/block-post-20190516' of git://git.kernel.dk/linux-block: (41 commits) block/bio-integrity: use struct_size() in kmalloc() nvme: validate cntlid during controller initialisation nvme: change locking for the per-subsystem controller list nvme: trace all async notice events nvme: fix typos in nvme status code values nvme-fabrics: remove unused argument nvme-multipath: avoid crash on invalid subsystem cntlid enumeration nvme-fc: use separate work queue to avoid warning nvme-rdma: remove redundant reference between ib_device and tagset nvme-pci: mark expected switch fall-through nvme-pci: add known admin effects to augument admin effects log page nvme-pci: init shadow doorbell after each reset brd: add cond_resched to brd_free_pages sata_rcar: Remove ata_host_alloc() error printing s390/dasd: fix build warning in dasd_eckd_build_cp_raw lightnvm: pblk: use nvm_rq_to_ppa_list() lightnvm: pblk: simplify partial read path lightnvm: do not remove instance under global lock lightnvm: track inflight target creations lightnvm: pblk: recover only written metadata ...
2019-05-16block/bio-integrity: use struct_size() in kmalloc()Jackie Liu1-2/+1
Use the new struct_size() helper to keep code simple. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-08Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-blockLinus Torvalds63-1289/+1495
Pull block updates from Jens Axboe: "Nothing major in this series, just fixes and improvements all over the map. This contains: - Series of fixes for sed-opal (David, Jonas) - Fixes and performance tweaks for BFQ (via Paolo) - Set of fixes for bcache (via Coly) - Set of fixes for md (via Song) - Enabling multi-page for passthrough requests (Ming) - Queue release fix series (Ming) - Device notification improvements (Martin) - Propagate underlying device rotational status in loop (Holger) - Removal of mtip32xx trim support, which has been disabled for years (Christoph) - Improvement and cleanup of nvme command handling (Christoph) - Add block SPDX tags (Christoph) - Cleanup/hardening of bio/bvec iteration (Christoph) - A few NVMe pull requests (Christoph) - Removal of CONFIG_LBDAF (Christoph) - Various little fixes here and there" * tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits) block: fix mismerge in bvec_advance block: don't drain in-progress dispatch in blk_cleanup_queue() blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release blk-mq: always free hctx after request queue is freed blk-mq: split blk_mq_alloc_and_init_hctx into two parts blk-mq: free hw queue's resource in hctx's release handler blk-mq: move cancel of requeue_work into blk_mq_release blk-mq: grab .q_usage_counter when queuing request from plug code path block: fix function name in comment nvmet: protect discovery change log event list iteration nvme: mark nvme_core_init and nvme_core_exit static nvme: move command size checks to the core nvme-fabrics: check more command sizes nvme-pci: check more command sizes nvme-pci: remove an unneeded variable initialization nvme-pci: unquiesce admin queue on shutdown nvme-pci: shutdown on timeout during deletion nvme-pci: fix psdt field for single segment sgls nvme-multipath: don't print ANA group state by default nvme-multipath: split bios with the ns_head bio_set before submitting ...
2019-05-07Merge tag 'driver-core-5.2-rc1' of ↵Linus Torvalds3-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core/kobject updates from Greg KH: "Here is the "big" set of driver core patches for 5.2-rc1 There are a number of ACPI patches in here as well, as Rafael said they should go through this tree due to the driver core changes they required. They have all been acked by the ACPI developers. There are also a number of small subsystem-specific changes in here, due to some changes to the kobject core code. Those too have all been acked by the various subsystem maintainers. As for content, it's pretty boring outside of the ACPI changes: - spdx cleanups - kobject documentation updates - default attribute groups for kobjects - other minor kobject/driver core fixes All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits) kobject: clean up the kobject add documentation a bit more kobject: Fix kernel-doc comment first line kobject: Remove docstring reference to kset firmware_loader: Fix a typo ("syfs" -> "sysfs") kobject: fix dereference before null check on kobj Revert "driver core: platform: Fix the usage of platform device name(pdev->name)" init/config: Do not select BUILD_BIN2C for IKCONFIG Provide in-kernel headers to make extending kernel easier kobject: Improve doc clarity kobject_init_and_add() kobject: Improve docs for kobject_add/del driver core: platform: Fix the usage of platform device name(pdev->name) livepatch: Replace klp_ktype_patch's default_attrs with groups cpufreq: schedutil: Replace default_attrs field with groups padata: Replace padata_attr_type default_attrs field with groups irqdesc: Replace irq_kobj_type's default_attrs field with groups net-sysfs: Replace ktype default_attrs field with groups block: Replace all ktype default_attrs with groups samples/kobject: Replace foo_ktype's default_attrs field with groups kobject: Add support for default attribute groups to kobj_type driver core: Postpone DMA tear-down until after devres release for probe failure ...
2019-05-04block: don't drain in-progress dispatch in blk_cleanup_queue()Ming Lei1-12/+0
Now freeing hw queue resource is moved to hctx's release handler, we don't need to worry about the race between blk_cleanup_queue and run queue any more. So don't drain in-progress dispatch in blk_cleanup_queue(). This is basically revert of c2856ae2f315 ("blk-mq: quiesce queue before freeing queue"). Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_releaseMing Lei2-8/+2
hctx is always released after requeue is freed. With holding queue's kobject refcount, it is safe for driver to run queue, so one run queue might be scheduled after blk_sync_queue() is done. So moving the cancel of hctx->run_work into blk_mq_hw_sysfs_release() for avoiding run released queue. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04blk-mq: always free hctx after request queue is freedMing Lei1-13/+33
In normal queue cleanup path, hctx is released after request queue is freed, see blk_mq_release(). However, in __blk_mq_update_nr_hw_queues(), hctx may be freed because of hw queues shrinking. This way is easy to cause use-after-free, because: one implicit rule is that it is safe to call almost all block layer APIs if the request queue is alive; and one hctx may be retrieved by one API, then the hctx can be freed by blk_mq_update_nr_hw_queues(); finally use-after-free is triggered. Fixes this issue by always freeing hctx after releasing request queue. If some hctxs are removed in blk_mq_update_nr_hw_queues(), introduce a per-queue list to hold them, then try to resuse these hctxs if numa node is matched. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04blk-mq: split blk_mq_alloc_and_init_hctx into two partsMing Lei1-64/+75
Split blk_mq_alloc_and_init_hctx into two parts, and one is blk_mq_alloc_hctx() for allocating all hctx resources, another is blk_mq_init_hctx() for initializing hctx, which serves as counter-part of blk_mq_exit_hctx(). Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org Cc: Martin K . Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04blk-mq: free hw queue's resource in hctx's release handlerMing Lei4-8/+10
Once blk_cleanup_queue() returns, tags shouldn't be used any more, because blk_mq_free_tag_set() may be called. Commit 45a9c9d909b2 ("blk-mq: Fix a use-after-free") fixes this issue exactly. However, that commit introduces another issue. Before 45a9c9d909b2, we are allowed to run queue during cleaning up queue if the queue's kobj refcount is held. After that commit, queue can't be run during queue cleaning up, otherwise oops can be triggered easily because some fields of hctx are freed by blk_mq_free_queue() in blk_cleanup_queue(). We have invented ways for addressing this kind of issue before, such as: 8dc765d438f1 ("SCSI: fix queue cleanup race before queue initialization is done") c2856ae2f315 ("blk-mq: quiesce queue before freeing queue") But still can't cover all cases, recently James reports another such kind of issue: https://marc.info/?l=linux-scsi&m=155389088124782&w=2 This issue can be quite hard to address by previous way, given scsi_run_queue() may run requeues for other LUNs. Fixes the above issue by freeing hctx's resources in its release handler, and this way is safe becasue tags isn't needed for freeing such hctx resource. This approach follows typical design pattern wrt. kobject's release handler. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reported-by: James Smart <james.smart@broadcom.com> Fixes: 45a9c9d909b2 ("blk-mq: Fix a use-after-free") Cc: stable@vger.kernel.org Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04blk-mq: move cancel of requeue_work into blk_mq_releaseMing Lei2-1/+2
With holding queue's kobject refcount, it is safe for driver to schedule requeue. However, blk_mq_kick_requeue_list() may be called after blk_sync_queue() is done because of concurrent requeue activities, then requeue work may not be completed when freeing queue, and kernel oops is triggered. So moving the cancel of requeue_work into blk_mq_release() for avoiding race between requeue and freeing queue. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04blk-mq: grab .q_usage_counter when queuing request from plug code pathMing Lei1-1/+11
Just like aio/io_uring, we need to grab 2 refcount for queuing one request, one is for submission, another is for completion. If the request isn't queued from plug code path, the refcount grabbed in generic_make_request() serves for submission. In theroy, this refcount should have been released after the sumission(async run queue) is done. blk_freeze_queue() works with blk_sync_queue() together for avoiding race between cleanup queue and IO submission, given async run queue activities are canceled because hctx->run_work is scheduled with the refcount held, so it is fine to not hold the refcount when running the run queue work function for dispatch IO. However, if request is staggered into plug list, and finally queued from plug code path, the refcount in submission side is actually missed. And we may start to run queue after queue is removed because the queue's kobject refcount isn't guaranteed to be grabbed in flushing plug list context, then kernel oops is triggered, see the following race: blk_mq_flush_plug_list(): blk_mq_sched_insert_requests() insert requests to sw queue or scheduler queue blk_mq_run_hw_queue Because of concurrent run queue, all requests inserted above may be completed before calling the above blk_mq_run_hw_queue. Then queue can be freed during the above blk_mq_run_hw_queue(). Fixes the issue by grab .q_usage_counter before calling blk_mq_sched_insert_requests() in blk_mq_flush_plug_list(). This way is safe because the queue is absolutely alive before inserting request. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-03block: fix function name in commentRaul E Rangel1-1/+1
The comment was out of date. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01block: remove the unused blk_queue_dma_pad functionChristoph Hellwig1-16/+0
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01block: add SPDX tags to block layer files missing licensing informationChristoph Hellwig31-0/+32
Various block layer files do not have any licensing information at all. Add SPDX tags for the default kernel GPLv2 license to those. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01block: switch all files cleared marked as GPLv2 or later to SPDX tagsChristoph Hellwig9-115/+9
All these files have some form of the usual GPLv2 or later boilerplate. Switch them to use SPDX tags instead. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01block: switch all files cleared marked as GPLv2 to SPDX tagsChristoph Hellwig16-171/+16
All these files have some form of the usual GPLv2 boilerplate. Switch them to use SPDX tags instead. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30block: clean up __bio_add_pc_page a bitChristoph Hellwig1-6/+5
Share the bi_size update by moving the done label up, and duplicate the bv_len update in the two callers to get rid of the bvec_merge label. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30block: remove bogus comments in __bio_add_pc_pageChristoph Hellwig1-9/+0
We are never called with file system pages by defintions for the passthrough interface, and we also never undo any addition later these days. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30block: remove the __bio_add_pc_page exportChristoph Hellwig1-2/+1
The same page optimization is a rather odd corner case, which is not used outside bio.c and which really should not be used outside of bio.c either - we have better highlevel helpers like the rq/bio mapping helpers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30block: remove the i argument to bio_for_each_segment_allChristoph Hellwig2-21/+11
We only have two callers that need the integer loop iterator, and they can easily maintain it themselves. Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-25block: Replace all ktype default_attrs with groupsKimberly Brown3-8/+6
The kobj_type default_attrs field is being replaced by the default_groups field. Replace all of the ktype default_attrs fields in the block subsystem with default_groups and use the ATTRIBUTE_GROUPS macro to create the default groups. Remove default_ctx_attrs[] because it doesn't contain any attributes. This patch was tested by verifying that the sysfs files for the attributes in the default groups were created. Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-24block: don't run get_page() on pages from non-bvec iov iterMing Lei1-1/+1
The refcount has been increased for pages retrieved from non-bvec iov iter via __bio_iov_iter_get_pages(), so don't need to do that again. Otherwise, IO pages are leaked easily. Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Fixes: 7321ecbfc7cf ("block: change how we get page references in bio_iov_iter_get_pages") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-23block: clarify that bio_add_page() and related helpers can add multi pagesMing Lei1-11/+15
bio_add_page() and __bio_add_page() are capable of adding pages into bio, and now we have at least two such usages alreay: - __bio_iov_bvec_add_pages() - nvmet_bdev_execute_rw(). So update comments on these two helpers. The thing is a bit special for __bio_try_merge_page(), given the caller needs to know if the new added page is same with the last added page, then it isn't safe to pass multi-page in case that 'same_page' is true, so adds warning on potential misuse, and updates comment on __bio_try_merge_page(). Cc: linux-xfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-22block: don't show io_timeout if driver has no timeout handlerWeiping Zhang1-2/+28
If the low level driver has no timeout handler, the /sys/block/<disk>/queue/io_timeout will not be displayed. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-22block: avoid scatterlist offsets > PAGE_SIZEChristoph Hellwig1-1/+13
While we generally allow scatterlists to have offsets larger than page size for an entry, and other subsystems like the crypto code make use of that, the block layer isn't quite ready for that. Flip the switch back to avoid them for now, and revisit that decision early in a merge window once the known offenders are fixed. Fixes: 8a96a0e40810 ("block: rewrite blk_bvec_map_sg to avoid a nth_page call") Reviewed-by: Ming Lei <ming.lei@redhat.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-22block: fix use-after-free on gendiskYufen Yu2-0/+26
commit 2da78092dda "block: Fix dev_t minor allocation lifetime" specifically moved blk_free_devt(dev->devt) call to part_release() to avoid reallocating device number before the device is fully shutdown. However, it can cause use-after-free on gendisk in get_gendisk(). We use md device as example to show the race scenes: Process1 Worker Process2 md_free blkdev_open del_gendisk add delete_partition_work_fn() to wq __blkdev_get get_gendisk put_disk disk_release kfree(disk) find part from ext_devt_idr get_disk_and_module(disk) cause use after free delete_partition_work_fn put_device(part) part_release remove part from ext_devt_idr Before <devt, hd_struct pointer> is removed from ext_devt_idr by delete_partition_work_fn(), we can find the devt and then access gendisk by hd_struct pointer. But, if we access the gendisk after it have been freed, it can cause in use-after-freeon gendisk in get_gendisk(). We fix this by adding a new helper blk_invalidate_devt() in delete_partition() and del_gendisk(). It replaces hd_struct pointer in idr with value 'NULL', and deletes the entry from idr in part_release() as we do now. Thanks to Jan Kara for providing the solution and more clear comments for the code. Fixes: 2da78092dda1 ("block: Fix dev_t minor allocation lifetime") Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-22Merge tag 'v5.1-rc6' into for-5.2/blockJens Axboe8-84/+119
Pull in v5.1-rc6 to resolve two conflicts. One is in BFQ, in just a comment, and is trivial. The other one is a conflict due to a later fix in the bio multi-page work, and needs a bit more care. * tag 'v5.1-rc6': (770 commits) Linux 5.1-rc6 block: make sure that bvec length can't be overflow block: kill all_q_node in request_queue x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping mm/kmemleak.c: fix unused-function warning init: initialize jump labels before command line option parsing kernel/watchdog_hld.c: hard lockup message should end with a newline kcov: improve CONFIG_ARCH_HAS_KCOV help text mm: fix inactive list balancing between NUMA nodes and cgroups mm/hotplug: treat CMA pages as unmovable proc: fixup proc-pid-vm test proc: fix map_files test on F29 mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock mm: swapoff: shmem_unuse() stop eviction without igrab() mm: swapoff: take notice of completion sooner mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES mm: swapoff: shmem_find_swap_entries() filter out other types slab: store tagged freelist for off-slab slabmgmt ... Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-14bfq: update internal depth state when queue depth changesJens Axboe2-1/+9
A previous commit moved the shallow depth and BFQ depth map calculations to be done at init time, moving it outside of the hotter IO path. This potentially causes hangs if the users changes the depth of the scheduler map, by writing to the 'nr_requests' sysfs file for that device. Add a blk-mq-sched hook that allows blk-mq to inform the scheduler if the depth changes, so that the scheduler can update its internal state. Tested-by: Kai Krakow <kai@kaishome.de> Reported-by: Paolo Valente <paolo.valente@linaro.org> Fixes: f0635b8a416e ("bfq: calculate shallow depths at init time") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-12block: check_events: don't bother with events if unsupportedMartin Wilck1-11/+16
Drivers now report to the block layer if they support media change events. If this is not the case, there's no need to allocate the event structure, and all event handling code can effectively be skipped. This simplifies code flow in particular for non-removable sd devices. This effectively reverts commit 75e3f3ee3c64 ("block: always allocate genhd->ev if check_events is implemented"). The sysfs files for the events are kept in place even if no events are supported, as user space may rely on them being present. The only difference is that an error code is now returned if the user tries to set poll_msecs. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-12block: disk_events: introduce event flagsMartin Wilck1-4/+9
Currently, an empty disk->events field tells the block layer not to forward media change events to user space. This was done in commit 7c88a168da80 ("block: don't propagate unlisted DISK_EVENTs to userland") in order to avoid events from "fringe" drivers to be forwarded to user space. By doing so, the block layer lost the information which events were supported by a particular block device, and most importantly, whether or not a given device supports media change events at all. Prepare for not interpreting the "events" field this way in the future any more. This is done by adding an additional field "event_flags" to struct gendisk, and two flag bits that can be set to have the device treated like one that had the "events" field set to a non-zero value before. This applies only to the sd and sr drivers, which are changed to set the new flags. The new flags are DISK_EVENT_FLAG_POLL to enforce polling of the device for synchronous events, and DISK_EVENT_FLAG_UEVENT to tell the blocklayer to generate udev events from kernel events. In order to add the event_flags field to struct gendisk, the events field is converted to an "unsigned short"; it doesn't need to hold values bigger than 2 anyway. This patch doesn't change behavior. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-12block: genhd: remove async_events fieldMartin Wilck1-6/+4
The async_events field, intended to be used for drivers that support asynchronous notifications about disk events (aka media change events), isn't currently used by any driver, and apparently that has been that way for a long time (if not forever). Remove it. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-12block: only allow contiguous page structs in a bio_vecChristoph Hellwig1-2/+7
We currently have to call nth_page when iterating over pages inside a bio_vec. Jens complained a while ago that this is fairly expensive. To mitigate this we can check that that the actual page structures are contiguous when adding them to the bio, and just do check pointer arithmetics later on. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-12block: change how we get page references in bio_iov_iter_get_pagesChristoph Hellwig1-26/+25
Instead of needing a special macro to iterate over all pages in a bvec just do a second passs over the whole bio. This also matches what we do on the release side. The release side helper is moved up to where we need the get helper to clearly express the symmetry. Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-12block: don't allow multiple bio_iov_iter_get_pages calls per bioChristoph Hellwig1-9/+6
No caller uses bio_iov_iter_get_pages multiple times on a given bio, and that funtionality isn't all that useful. Removing it will make some future changes a little easier and also simplifies the function a bit. Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-12block: refactor __bio_iov_bvec_add_pagesChristoph Hellwig1-10/+9
Return early on error, and add an unlikely annotation for that case. Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-12block: rewrite blk_bvec_map_sg to avoid a nth_page callChristoph Hellwig1-15/+6
The offset in scatterlists is allowed to be larger than the page size, so don't go to great length to avoid that case and simplify the arithmetics. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-11block: do not leak memory in bio_copy_user_iov()Jérôme Glisse1-1/+4
When bio_add_pc_page() fails in bio_copy_user_iov() we should free the page we just allocated otherwise we are leaking it. Cc: linux-block@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-10blk-mq: introduce blk_mq_complete_request_sync()Ming Lei1-0/+7
In NVMe's error handler, follows the typical steps of tearing down hardware for recovering controller: 1) stop blk_mq hw queues 2) stop the real hw queues 3) cancel in-flight requests via blk_mq_tagset_busy_iter(tags, cancel_request, ...) cancel_request(): mark the request as abort blk_mq_complete_request(req); 4) destroy real hw queues However, there may be race between #3 and #4, because blk_mq_complete_request() may run q->mq_ops->complete(rq) remotelly and asynchronously, and ->complete(rq) may be run after #4. This patch introduces blk_mq_complete_request_sync() for fixing the above race. Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Bart Van Assche <bvanassche@acm.org> Cc: James Smart <james.smart@broadcom.com> Cc: linux-nvme@lists.infradead.org Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-10block, bfq: fix use after free in bfq_bfqq_expirePaolo Valente3-11/+23
The function bfq_bfqq_expire() invokes the function __bfq_bfqq_expire(), and the latter may free the in-service bfq-queue. If this happens, then no other instruction of bfq_bfqq_expire() must be executed, or a use-after-free will occur. Basing on the assumption that __bfq_bfqq_expire() invokes bfq_put_queue() on the in-service bfq-queue exactly once, the queue is assumed to be freed if its refcounter is equal to one right before invoking __bfq_bfqq_expire(). But, since commit 9dee8b3b057e ("block, bfq: fix queue removal from weights tree") this assumption is false. __bfq_bfqq_expire() may also invoke bfq_weights_tree_remove() and, since commit 9dee8b3b057e ("block, bfq: fix queue removal from weights tree"), also the latter function may invoke bfq_put_queue(). So __bfq_bfqq_expire() may invoke bfq_put_queue() twice, and this is the actual case where the in-service queue may happen to be freed. To address this issue, this commit moves the check on the refcounter of the queue right around the last bfq_put_queue() that may be invoked on the queue. Fixes: 9dee8b3b057e ("block, bfq: fix queue removal from weights tree") Reported-by: Dmitrii Tcvetkov <demfloro@demfloro.ru> Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Dmitrii Tcvetkov <demfloro@demfloro.ru> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-08block: fix build warning in merging bvecsMing Lei1-6/+10
Commit f6970f83ef79 ("block: don't check if adjacent bvecs in one bio can be mergeable") changes bvec merge by only considering two bvecs from different bios. However, if the former bio doesn't inlcude any io bvec, then the following warning may be triggered: warning: ‘bvec.bv_offset’ may be used uninitialized in this function [-Wmaybe-uninitialized] In practice, it shouldn't be triggered. Fixes it by adding check on former bio, the check shouldn't add any cost given 'bio->bi_iter' can be hit in cache. Reported-by: Jens Axboe <axboe@kernel.dk> Fixes: f6970f83ef79 ("block: don't check if adjacent bvecs in one bio can be mergeable") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-08block, bfq: fix some typos in commentsAngelo Ruocco4-16/+16
Some of the comments in the bfq files had typos. This patch fixes them. Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-08block: remove unused variable 'def'Hisao Tanabe1-4/+2
The 'def' local variable became unused after commit f382fb0bcef4 ("block: remove legacy IO schedulers"), let's remove it. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hisao Tanabe <xtanabe@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: rename next to execute_stepsDavid Kozub1-16/+17
As the function is responsible for executing the individual steps supplied in the steps argument, execute_steps is a more descriptive name than the rather generic next. Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: don't repeat opal_discovery0 in each steps arrayDavid Kozub1-33/+42
Originally each of the opal functions that call next include opal_discovery0 in the array of steps. This is superfluous and can be done always inside next. Acked-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: pass steps via argument rather than via opal_devDavid Kozub1-89/+69
The steps argument is only read by the next function, so it can be passed directly as an argument rather than via opal_dev. Normally, the steps is an array on the stack, so the pointer stops being valid then the function that set opal_dev.steps returns. If opal_dev.steps was not set to NULL before return it would become a dangling pointer. When the steps are passed as argument this becomes easier to see and more difficult to misuse. Acked-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: use named Opal tokens instead of integer literalsDavid Kozub1-9/+9
Replace integer literals by Opal tokens defined in opal_proto.h where possible. Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: unify retrieval of table columnsDavid Kozub1-83/+47
Instead of having multiple places defining the same argument list to get a specific column of a sed-opal table, provide a generic version and call it from those functions. Co-authored-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: add token for OPAL_LIFECYCLEDavid Kozub2-2/+4
Define OPAL_LIFECYCLE token and use it instead of literals in get_lsp_lifecycle. Acked-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: split generation of bytestring header and contentJonas Rabenstein1-8/+14
Split the header generation from the (normal) memcpy part if a bytestring is copied into the command buffer. This allows in-place generation of the bytestring content. For example, copy_from_user may be used without an intermediate buffer. Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: print failed function addressJonas Rabenstein1-2/+2
Add function address (and if available its symbol) to the message if a step function fails. Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com Signed-off-by: Jens Axboe <axboe@kernel.dk>