summaryrefslogtreecommitdiff
path: root/crypto
AgeCommit message (Collapse)AuthorFilesLines
2023-02-13crypto: certs: fix FIPS selftest dependencyArnd Bergmann2-1/+2
The selftest code is built into the x509_key_parser module, and depends on the pkcs7_message_parser module, which in turn has a dependency on the key parser, creating a dependency loop and a resulting link failure when the pkcs7 code is a loadable module: ld: crypto/asymmetric_keys/selftest.o: in function `fips_signature_selftest': crypto/asymmetric_keys/selftest.c:205: undefined reference to `pkcs7_parse_message' ld: crypto/asymmetric_keys/selftest.c:209: undefined reference to `pkcs7_supply_detached_data' ld: crypto/asymmetric_keys/selftest.c:211: undefined reference to `pkcs7_verify' ld: crypto/asymmetric_keys/selftest.c:215: undefined reference to `pkcs7_validate_trust' ld: crypto/asymmetric_keys/selftest.c:219: undefined reference to `pkcs7_free_message' Avoid this by only allowing the selftest to be enabled when either both parts are loadable modules, or both are built-in. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-02-10crypto: testmgr - add diff-splits of src/dst into default cipher configZhang Yiqun1-0/+8
This type of request is often happened in AF_ALG cases. So add this vector in default cipher config array. Signed-off-by: Zhang Yiqun <zhangyiqun@phytium.com.cn> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-03Revert "crypto: rsa-pkcs1pad - Replace GFP_ATOMIC with GFP_KERNEL in ↵Herbert Xu1-1/+1
pkcs1pad_encrypt_sign_complete" This reverts commit 1ca2809897155f1adc43e4859b4a3582e235c09a. While the akcipher API as a whole is designed to be called only from thread context, its completion path is still called from softirq context as usual. Therefore we must not use GFP_KERNEL on that path. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-27crypto: engine - Fix excess parameter doc warningHerbert Xu1-1/+1
The engine parameter should not be marked for kernel doc as it triggers a warning. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-27crypto: xts - Handle EBUSY correctlyHerbert Xu1-4/+4
As it is xts only handles the special return value of EINPROGRESS, which means that in all other cases it will free data related to the request. However, as the caller of xts may specify MAY_BACKLOG, we also need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-free. Fixes: 8083b1bf8163 ("crypto: xts - add support for ciphertext stealing") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-27crypto: cryptd - Remove unnecessary skcipher_request_zeroHerbert Xu1-2/+0
Previously the child skcipher request was stored on the stack and therefore needed to be zeroed. As it is now dynamically allocated we no longer need to do so. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-27crypto: testmgr - disallow certain DRBG hash functions in FIPS modeVladis Dronov1-4/+0
According to FIPS 140-3 IG, section D.R "Hash Functions Acceptable for Use in the SP 800-90A DRBGs", modules certified after May 16th, 2023 must not support the use of: SHA-224, SHA-384, SHA512-224, SHA512-256, SHA3-224, SHA3-384. Disallow HMAC and HASH DRBGs using SHA-384 in FIPS mode. Signed-off-by: Vladis Dronov <vdronov@redhat.com> Reviewed-by: Stephan Müller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-20crypto: seqiv - Handle EBUSY correctlyHerbert Xu1-1/+1
As it is seqiv only handles the special return value of EINPROGERSS, which means that in all other cases it will free data related to the request. However, as the caller of seqiv may specify MAY_BACKLOG, we also need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-free. Fixes: 0a270321dbf9 ("[CRYPTO] seqiv: Add Sequence Number IV Generator") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-20crypto: essiv - Handle EBUSY correctlyHerbert Xu1-1/+6
As it is essiv only handles the special return value of EINPROGERSS, which means that in all other cases it will free data related to the request. However, as the caller of essiv may specify MAY_BACKLOG, we also need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-free. Fixes: be1eb7f78aa8 ("crypto: essiv - create wrapper template...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-20crypto: tcrypt - include larger key sizes in RFC4106 benchmarkArd Biesheuvel2-5/+5
RFC4106 wraps AES in GCM mode, and can be used with larger key sizes than 128/160 bits, just like AES itself. So add these to the tcrypt recipe so they will be benchmarked as well. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-19wifi: cfg80211: Deduplicate certificate loadingLukas Wunner1-0/+1
load_keys_from_buffer() in net/wireless/reg.c duplicates x509_load_certificate_list() in crypto/asymmetric_keys/x509_loader.c for no apparent reason. Deduplicate it. No functional change intended. Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/e7280be84acda02634bc7cb52c97656182b9c700.1673197326.git.lukas@wunner.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-13crypto: skcipher - Use scatterwalk (un)map interface for dst and src buffersArd Biesheuvel1-18/+4
The skcipher walk API implementation avoids scatterwalk_map() for mapping the source and destination buffers, and invokes kmap_atomic() directly if the buffer in question is not in low memory (which can only happen on 32-bit architectures). This avoids some overhead on 64-bit architectures, and most notably, permits the skcipher code to run with preemption enabled. Now that scatterwalk_map() has been updated to use kmap_local(), none of this is needed, so we can simply use scatterwalk_map/unmap instead. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-06crypto: x86/aria - do not use magic number offsets of aria_ctxTaehee Yoo1-0/+4
aria-avx assembly code accesses members of aria_ctx with magic number offset. If the shape of struct aria_ctx is changed carelessly, aria-avx will not work. So, we need to ensure accessing members of aria_ctx with correct offset values, not with magic numbers. It adds ARIA_CTX_enc_key, ARIA_CTX_dec_key, and ARIA_CTX_rounds in the asm-offsets.c So, correct offset definitions will be generated. aria-avx assembly code can access members of aria_ctx safely with these definitions. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-06crypto: testmgr - allow ecdsa-nist-p256 and -p384 in FIPS modeNicolai Stange1-0/+2
The kernel provides implementations of the NIST ECDSA signature verification primitives. For key sizes of 256 and 384 bits respectively they are approved and can be enabled in FIPS mode. Do so. Signed-off-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-06crypto: testmgr - disallow plain ghash in FIPS modeNicolai Stange1-1/+0
ghash may be used only as part of the gcm(aes) construction in FIPS mode. Since commit d6097b8d5d55 ("crypto: api - allow algs only in specific constructions in FIPS mode") there's support for using spawns which by itself are marked as non-approved from approved template instantiations. So simply mark plain ghash as non-approved in testmgr to block any attempts of direct instantiations in FIPS mode. Signed-off-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-06crypto: testmgr - disallow plain cbcmac(aes) in FIPS modeNicolai Stange1-1/+0
cbcmac(aes) may be used only as part of the ccm(aes) construction in FIPS mode. Since commit d6097b8d5d55 ("crypto: api - allow algs only in specific constructions in FIPS mode") there's support for using spawns which by itself are marked as non-approved from approved template instantiations. So simply mark plain cbcmac(aes) as non-approved in testmgr to block any attempts of direct instantiations in FIPS mode. Signed-off-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-30crypto: wp512 - disable kmsan checks in wp512_process_buffer()Arnd Bergmann1-1/+1
The memory sanitizer causes excessive register spills in this function: crypto/wp512.c:782:13: error: stack frame size (2104) exceeds limit (2048) in 'wp512_process_buffer' [-Werror,-Wframe-larger-than] Assume that this one is safe, and mark it as needing no checks to get the stack usage back down to the normal level. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-30crypto: scatterwalk - use kmap_local() not kmap_atomic()Ard Biesheuvel2-4/+4
kmap_atomic() is used to create short-lived mappings of pages that may not be accessible via the kernel direct map. This is only needed on 32-bit architectures that implement CONFIG_HIGHMEM, but it can be used on 64-bit other architectures too, where the returned mapping is simply the kernel direct address of the page. However, kmap_atomic() does not support migration on CONFIG_HIGHMEM configurations, due to the use of per-CPU kmap slots, and so it disables preemption on all architectures, not just the 32-bit ones. This implies that all scatterwalk based crypto routines essentially execute with preemption disabled all the time, which is less than ideal. So let's switch scatterwalk_map/_unmap and the shash/ahash routines to kmap_local() instead, which serves a similar purpose, but without the resulting impact on preemption on architectures that have no need for CONFIG_HIGHMEM. Cc: Eric Biggers <ebiggers@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "Elliott, Robert (Servers)" <elliott@hpe.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-14Merge tag 'v6.2-p1' of ↵Linus Torvalds35-728/+1481
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Optimise away self-test overhead when they are disabled - Support symmetric encryption via keyring keys in af_alg - Flip hwrng default_quality, the default is now maximum entropy Algorithms: - Add library version of aesgcm - CFI fixes for assembly code - Add arm/arm64 accelerated versions of sm3/sm4 Drivers: - Remove assumption on arm64 that kmalloc is DMA-aligned - Fix selftest failures in rockchip - Add support for RK3328/RK3399 in rockchip - Add deflate support in qat - Merge ux500 into stm32 - Add support for TEE for PCI ID 0x14CA in ccp - Add mt7986 support in mtk - Add MaxLinear platform support in inside-secure - Add NPCM8XX support in npcm" * tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits) crypto: ux500/cryp - delete driver crypto: stm32/cryp - enable for use with Ux500 crypto: stm32 - enable drivers to be used on Ux500 dt-bindings: crypto: Let STM32 define Ux500 CRYP hwrng: geode - Fix PCI device refcount leak hwrng: amd - Fix PCI device refcount leak crypto: qce - Set DMA alignment explicitly crypto: octeontx2 - Set DMA alignment explicitly crypto: octeontx - Set DMA alignment explicitly crypto: keembay - Set DMA alignment explicitly crypto: safexcel - Set DMA alignment explicitly crypto: hisilicon/hpre - Set DMA alignment explicitly crypto: chelsio - Set DMA alignment explicitly crypto: ccree - Set DMA alignment explicitly crypto: ccp - Set DMA alignment explicitly crypto: cavium - Set DMA alignment explicitly crypto: img-hash - Fix variable dereferenced before check 'hdev->req' crypto: arm64/ghash-ce - use frame_push/pop macros consistently crypto: arm64/crct10dif - use frame_push/pop macros consistently crypto: arm64/aes-modes - use frame_push/pop macros consistently ...
2022-12-13Merge tag 'pull-iov_iter' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull iov_iter updates from Al Viro: "iov_iter work; most of that is about getting rid of direction misannotations and (hopefully) preventing more of the same for the future" * tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: use less confusing names for iov_iter direction initializers iov_iter: saner checks for attempt to copy to/from iterator [xen] fix "direction" argument of iov_iter_kvec() [vhost] fix 'direction' argument of iov_iter_{init,bvec}() [target] fix iov_iter_bvec() "direction" argument [s390] memcpy_real(): WRITE is "data source", not destination... [s390] zcore: WRITE is "data source", not destination... [infiniband] READ is "data destination", not source... [fsi] WRITE is "data source", not destination... [s390] copy_oldmem_kernel() - WRITE is "data source", not destination csum_and_copy_to_iter(): handle ITER_DISCARD get rid of unlikely() on page_copy_sane() calls
2022-12-02crypto: api - Increase MAX_ALGAPI_ALIGNMASK to 127Herbert Xu1-2/+7
Previously we limited the maximum alignment mask to 63. This is mostly due to stack usage for shash. This patch introduces a separate limit for shash algorithms and increases the general limit to 127 which is the value that we need for DMA allocations on arm64. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-02crypto: Prepare to move crypto_tfm_ctxHerbert Xu17-17/+19
The helper crypto_tfm_ctx is only used by the Crypto API algorithm code and should really be in algapi.h. However, for historical reasons many files relied on it to be in crypto.h. This patch changes those files to use algapi.h instead in prepartion for a move. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-02crypto: dh - Use helper to set reqsizeHerbert Xu1-1/+3
The value of reqsize must only be changed through the helper. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-02crypto: rsa-pkcs1pad - Use helper to set reqsizeHerbert Xu1-1/+4
The value of reqsize must only be changed through the helper. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25use less confusing names for iov_iter direction initializersAl Viro1-2/+2
READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-11-25Revert "crypto: shash - avoid comparing pointers to exported functions under ↵Eric Biggers1-15/+3
CFI" This reverts commit 22ca9f4aaf431a9413dcc115dd590123307f274f because CFI no longer breaks cross-module function address equality, so crypto_shash_alg_has_setkey() can now be an inline function like before. This commit should not be backported to kernels that don't have the new CFI implementation. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25crypto: tcrypt - Fix multibuffer skcipher speed test mem leakZhang Yiqun1-9/+0
In the past, the data for mb-skcipher test has been allocated twice, that means the first allcated memory area is without free, which may cause a potential memory leakage. So this patch is to remove one allocation to fix this error. Fixes: e161c5930c15 ("crypto: tcrypt - add multibuf skcipher...") Signed-off-by: Zhang Yiqun <zhangyiqun@phytium.com.cn> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25crypto: algboss - compile out test-related code when tests disabledEric Biggers1-5/+4
When CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is set, the code in algboss.c that handles CRYPTO_MSG_ALG_REGISTER is unnecessary, so make it be compiled out. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25crypto: kdf - silence noisy self-testEric Biggers1-1/+1
Make the kdf_sp800108 self-test only print a message on success when fips_enabled, so that it's consistent with testmgr.c and doesn't spam the kernel log with a message that isn't really important. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25crypto: kdf - skip self-test when tests disabledEric Biggers1-2/+6
Make kdf_sp800108 honor the CONFIG_CRYPTO_MANAGER_DISABLE_TESTS kconfig option, so that it doesn't always waste time running its self-test. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25crypto: api - compile out crypto_boot_test_finished when tests disabledEric Biggers3-6/+29
The crypto_boot_test_finished static key is unnecessary when self-tests are disabled in the kconfig, so optimize it out accordingly, along with the entirety of crypto_start_tests(). This mainly avoids the overhead of an unnecessary static_branch_enable() on every boot. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25crypto: algboss - optimize registration of internal algorithmsEric Biggers2-13/+3
Since algboss always skips testing of algorithms with the CRYPTO_ALG_INTERNAL flag, there is no need to go through the dance of creating the test kthread, which creates a lot of overhead. Instead, we can just directly finish the algorithm registration, like is now done when self-tests are disabled entirely. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25crypto: api - optimize algorithm registration when self-tests disabledEric Biggers2-71/+86
Currently, registering an algorithm with the crypto API always causes a notification to be posted to the "cryptomgr", which then creates a kthread to self-test the algorithm. However, if self-tests are disabled in the kconfig (as is the default option), then this kthread just notifies waiters that the algorithm has been tested, then exits. This causes a significant amount of overhead, especially in the kthread creation and destruction, which is not necessary at all. For example, in a quick test I found that booting a "minimum" x86_64 kernel with all the crypto options enabled (except for the self-tests) takes about 400ms until PID 1 can start. Of that, a full 13ms is spent just doing this pointless dance, involving a kthread being created, run, and destroyed over 200 times. That's over 3% of the entire kernel start time. Fix this by just skipping the creation of the test larval and the posting of the registration notification entirely, when self-tests are disabled. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18crypto: skcipher - Allow sync algorithms with large request contextsHerbert Xu1-1/+1
Some sync algorithms may require a large amount of temporary space during its operations. There is no reason why they should be limited just because some legacy users want to place all temporary data on the stack. Such algorithms can now set a flag to indicate that they need extra request context, which will cause them to be invisible to users that go through the sync_skcipher interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18crypto: cryptd - Use request context instead of stack for sub-requestHerbert Xu1-17/+19
cryptd is buggy as it tries to use sync_skcipher without going through the proper sync_skcipher interface. In fact it doesn't even need sync_skcipher since it's already a proper skcipher and can easily access the request context instead of using something off the stack. Fixes: 36b3875a97b8 ("crypto: cryptd - Remove VLA usage of skcipher") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18treewide: use get_random_u32_inclusive() when possibleJason A. Donenfeld2-6/+6
These cases were done with this Coccinelle: @@ expression H; expression L; @@ - (get_random_u32_below(H) + L) + get_random_u32_inclusive(L, H + L - 1) @@ expression H; expression L; expression E; @@ get_random_u32_inclusive(L, H - + E - - E ) @@ expression H; expression L; expression E; @@ get_random_u32_inclusive(L, H - - E - + E ) @@ expression H; expression L; expression E; expression F; @@ get_random_u32_inclusive(L, H - - E + F - + E ) @@ expression H; expression L; expression E; expression F; @@ get_random_u32_inclusive(L, H - + E + F - - E ) And then subsequently cleaned up by hand, with several automatic cases rejected if it didn't make sense contextually. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld2-44/+44
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-11crypto: move gf128mul library into lib/cryptoArd Biesheuvel3-423/+3
The gf128mul library does not depend on the crypto API at all, so it can be moved into lib/crypto. This will allow us to use it in other library code in a subsequent patch without having to depend on CONFIG_CRYPTO. While at it, change the Kconfig symbol name to align with other crypto library implementations. However, the source file name is retained, as it is reflected in the module .ko filename, and changing this might break things for users. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-04crypto: tcrypt - add SM4 cts-cbc/xts/xcbc testTianjia Zhang1-0/+21
Added CTS-CBC/XTS/XCBC tests for SM4 algorithms, as well as corresponding speed tests, this is to test performance-optimized implementations of these modes. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-04crypto: testmgr - add SM4 cts-cbc/xts/xcbc test vectorsTianjia Zhang2-0/+996
This patch newly adds the test vectors of CTS-CBC/XTS/XCBC modes of the SM4 algorithm, and also added some test vectors for SM4 GCM/CCM. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-04crypto: tcrypt - Drop leading newlines from printsAnirudh Venkataramanan1-5/+5
The top level print banners have a leading newline. It's not entirely clear why this exists, but it makes it harder to parse tcrypt test output using a script. Drop said newlines. tcrypt output before this patch: [...] testing speed of rfc4106(gcm(aes)) (rfc4106-gcm-aesni) encryption [...] test 0 (160 bit key, 16 byte blocks): 1 operation in 2320 cycles (16 bytes) tcrypt output with this patch: [...] testing speed of rfc4106(gcm(aes)) (rfc4106-gcm-aesni) encryption [...] test 0 (160 bit key, 16 byte blocks): 1 operation in 2320 cycles (16 bytes) Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-04crypto: tcrypt - Drop module name from print stringAnirudh Venkataramanan1-2/+1
The pr_fmt() define includes KBUILD_MODNAME, and so there's no need for pr_err() to also print it. Drop module name from the print string. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-04crypto: tcrypt - Use pr_info/pr_errAnirudh Venkataramanan1-7/+7
Currently, there's mixed use of printk() and pr_info()/pr_err(). The latter prints the module name (because pr_fmt() is defined so) but the former does not. As a result there's inconsistency in the printed output. For example: modprobe mode=211: [...] test 0 (160 bit key, 16 byte blocks): 1 operation in 2320 cycles (16 bytes) [...] test 1 (160 bit key, 64 byte blocks): 1 operation in 2336 cycles (64 bytes) modprobe mode=215: [...] tcrypt: test 0 (160 bit key, 16 byte blocks): 1 operation in 2173 cycles (16 bytes) [...] tcrypt: test 1 (160 bit key, 64 byte blocks): 1 operation in 2241 cycles (64 bytes) Replace all instances of printk() with pr_info()/pr_err() so that the module name is printed consistently. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-04crypto: tcrypt - Use pr_cont to print test resultsAnirudh Venkataramanan1-4/+4
For some test cases, a line break gets inserted between the test banner and the results. For example, with mode=211 this is the output: [...] testing speed of rfc4106(gcm(aes)) (rfc4106-gcm-aesni) encryption [...] test 0 (160 bit key, 16 byte blocks): [...] 1 operation in 2373 cycles (16 bytes) --snip-- [...] testing speed of gcm(aes) (generic-gcm-aesni) encryption [...] test 0 (128 bit key, 16 byte blocks): [...] 1 operation in 2338 cycles (16 bytes) Similar behavior is seen in the following cases as well: modprobe tcrypt mode=212 modprobe tcrypt mode=213 modprobe tcrypt mode=221 modprobe tcrypt mode=300 sec=1 modprobe tcrypt mode=400 sec=1 This doesn't happen with mode=215: [...] tcrypt: testing speed of multibuffer rfc4106(gcm(aes)) (rfc4106-gcm-aesni) encryption [...] tcrypt: test 0 (160 bit key, 16 byte blocks): 1 operation in 2215 cycles (16 bytes) --snip-- [...] tcrypt: testing speed of multibuffer gcm(aes) (generic-gcm-aesni) encryption [...] tcrypt: test 0 (128 bit key, 16 byte blocks): 1 operation in 2191 cycles (16 bytes) This print inconsistency is because printk() is used instead of pr_cont() in a few places. Change these to be pr_cont(). checkpatch warns that pr_cont() shouldn't be used. This can be ignored in this context as tcrypt already uses pr_cont(). Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-28crypto: af_alg - Support symmetric encryption via keyring keysFrederick Lawler1-1/+134
We want to leverage keyring to store sensitive keys, and then use those keys for symmetric encryption via the crypto API. Among the key types we wish to support are: user, logon, encrypted, and trusted. User key types are already able to have their data copied to user space, but logon does not support this. Further, trusted and encrypted keys will return their encrypted data back to user space on read, which does not make them ideal for symmetric encryption. To support symmetric encryption for these key types, add a new ALG_SET_KEY_BY_KEY_SERIAL setsockopt() option to the crypto API. This allows users to pass a key_serial_t to the crypto API to perform symmetric encryption. The behavior is the same as ALG_SET_KEY, but the crypto key data is copied in kernel space from a keyring key, which allows for the support of logon, encrypted, and trusted key types. Keyring keys must have the KEY_(POS|USR|GRP|OTH)_SEARCH permission set to leverage this feature. This follows the asymmetric_key type where key lookup calls eventually lead to keyring_search_rcu() without the KEYRING_SEARCH_NO_CHECK_PERM flag set. Signed-off-by: Frederick Lawler <fred@cloudflare.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-21crypto: tcrypt - fix return value for multiple subtestsRobert Elliott1-128/+128
When a test mode invokes multiple tests (e.g., mode 0 invokes modes 1 through 199, and mode 3 tests three block cipher modes with des), don't keep accumulating the return values with ret += tcrypt_test(), which results in a bogus value if more than one report a nonzero value (e.g., two reporting -2 (-ENOENT) end up reporting -4 (-EINTR)). Instead, keep track of the minimum return value reported by any subtest. Fixes: 4e033a6bc70f ("crypto: tcrypt - Do not exit on success in fips mode") Signed-off-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-21crypto: ccm - use local variables instead of indirect referencesTianjia Zhang1-1/+1
The variable odata has been introduced into the function scope as a variable and should be used directly. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-12treewide: use get_random_bytes() when possibleJason A. Donenfeld1-1/+1
The prandom_bytes() function has been a deprecated inline wrapper around get_random_bytes() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-12treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld1-4/+4
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-12treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld1-43/+43
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-28 13:13:03 +0300