summaryrefslogtreecommitdiff
path: root/drivers/accel/ivpu
AgeCommit message (Collapse)AuthorFilesLines
2024-05-19Merge tag 'mm-stable-2024-05-17-19-19' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull mm updates from Andrew Morton: "The usual shower of singleton fixes and minor series all over MM, documented (hopefully adequately) in the respective changelogs. Notable series include: - Lucas Stach has provided some page-mapping cleanup/consolidation/ maintainability work in the series "mm/treewide: Remove pXd_huge() API". - In the series "Allow migrate on protnone reference with MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one test. - In their series "Memory allocation profiling" Kent Overstreet and Suren Baghdasaryan have contributed a means of determining (via /proc/allocinfo) whereabouts in the kernel memory is being allocated: number of calls and amount of memory. - Matthew Wilcox has provided the series "Various significant MM patches" which does a number of rather unrelated things, but in largely similar code sites. - In his series "mm: page_alloc: freelist migratetype hygiene" Johannes Weiner has fixed the page allocator's handling of migratetype requests, with resulting improvements in compaction efficiency. - In the series "make the hugetlb migration strategy consistent" Baolin Wang has fixed a hugetlb migration issue, which should improve hugetlb allocation reliability. - Liu Shixin has hit an I/O meltdown caused by readahead in a memory-tight memcg. Addressed in the series "Fix I/O high when memory almost met memcg limit". - In the series "mm/filemap: optimize folio adding and splitting" Kairui Song has optimized pagecache insertion, yielding ~10% performance improvement in one test. - Baoquan He has cleaned up and consolidated the early zone initialization code in the series "mm/mm_init.c: refactor free_area_init_core()". - Baoquan has also redone some MM initializatio code in the series "mm/init: minor clean up and improvement". - MM helper cleanups from Christoph Hellwig in his series "remove follow_pfn". - More cleanups from Matthew Wilcox in the series "Various page->flags cleanups". - Vlastimil Babka has contributed maintainability improvements in the series "memcg_kmem hooks refactoring". - More folio conversions and cleanups in Matthew Wilcox's series: "Convert huge_zero_page to huge_zero_folio" "khugepaged folio conversions" "Remove page_idle and page_young wrappers" "Use folio APIs in procfs" "Clean up __folio_put()" "Some cleanups for memory-failure" "Remove page_mapping()" "More folio compat code removal" - David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb functions to work on folis". - Code consolidation and cleanup work related to GUP's handling of hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2". - Rick Edgecombe has developed some fixes to stack guard gaps in the series "Cover a guard gap corner case". - Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series "mm/ksm: fix ksm exec support for prctl". - Baolin Wang has implemented NUMA balancing for multi-size THPs. This is a simple first-cut implementation for now. The series is "support multi-size THP numa balancing". - Cleanups to vma handling helper functions from Matthew Wilcox in the series "Unify vma_address and vma_pgoff_address". - Some selftests maintenance work from Dev Jain in the series "selftests/mm: mremap_test: Optimizations and style fixes". - Improvements to the swapping of multi-size THPs from Ryan Roberts in the series "Swap-out mTHP without splitting". - Kefeng Wang has significantly optimized the handling of arm64's permission page faults in the series "arch/mm/fault: accelerate pagefault when badaccess" "mm: remove arch's private VM_FAULT_BADMAP/BADACCESS" - GUP cleanups from David Hildenbrand in "mm/gup: consistently call it GUP-fast". - hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to use struct vm_fault". - selftests build fixes from John Hubbard in the series "Fix selftests/mm build without requiring "make headers"". - Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes the initialization code so that migration between different memory types works as intended. - David Hildenbrand has improved follow_pte() and fixed an errant driver in the series "mm: follow_pte() improvements and acrn follow_pte() fixes". - David also did some cleanup work on large folio mapcounts in his series "mm: mapcount for large folios + page_mapcount() cleanups". - Folio conversions in KSM in Alex Shi's series "transfer page to folio in KSM". - Barry Song has added some sysfs stats for monitoring multi-size THP's in the series "mm: add per-order mTHP alloc and swpout counters". - Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled and limit checking cleanups". - Matthew Wilcox has been looking at buffer_head code and found the documentation to be lacking. The series is "Improve buffer head documentation". - Multi-size THPs get more work, this time from Lance Yang. His series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes the freeing of these things. - Kemeng Shi has added more userspace-visible writeback instrumentation in the series "Improve visibility of writeback". - Kemeng Shi then sent some maintenance work on top in the series "Fix and cleanups to page-writeback". - Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the series "Improve anon_vma scalability for anon VMAs". Intel's test bot reported an improbable 3x improvement in one test. - SeongJae Park adds some DAMON feature work in the series "mm/damon: add a DAMOS filter type for page granularity access recheck" "selftests/damon: add DAMOS quota goal test" - Also some maintenance work in the series "mm/damon/paddr: simplify page level access re-check for pageout" "mm/damon: misc fixes and improvements" - David Hildenbrand has disabled some known-to-fail selftests ni the series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL". - memcg metadata storage optimizations from Shakeel Butt in "memcg: reduce memory consumption by memcg stats". - DAX fixes and maintenance work from Vishal Verma in the series "dax/bus.c: Fixups for dax-bus locking"" * tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits) memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault selftests: cgroup: add tests to verify the zswap writeback path mm: memcg: make alloc_mem_cgroup_per_node_info() return bool mm/damon/core: fix return value from damos_wmark_metric_value mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED selftests: cgroup: remove redundant enabling of memory controller Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT Docs/mm/damon/design: use a list for supported filters Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file selftests/damon: classify tests for functionalities and regressions selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None' selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts selftests/damon/_damon_sysfs: check errors from nr_schemes file reads mm/damon/core: initialize ->esz_bp from damos_quota_init_priv() selftests/damon: add a test for DAMOS quota goal ...
2024-04-26fix missing vmalloc.h includesKent Overstreet1-0/+1
Patch series "Memory allocation profiling", v6. Overview: Low overhead [1] per-callsite memory allocation profiling. Not just for debug kernels, overhead low enough to be deployed in production. Example output: root@moria-kvm:~# sort -rn /proc/allocinfo 127664128 31168 mm/page_ext.c:270 func:alloc_page_ext 56373248 4737 mm/slub.c:2259 func:alloc_slab_page 14880768 3633 mm/readahead.c:247 func:page_cache_ra_unbounded 14417920 3520 mm/mm_init.c:2530 func:alloc_large_system_hash 13377536 234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs 11718656 2861 mm/filemap.c:1919 func:__filemap_get_folio 9192960 2800 kernel/fork.c:307 func:alloc_thread_stack_node 4206592 4 net/netfilter/nf_conntrack_core.c:2567 func:nf_ct_alloc_hashtable 4136960 1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod] func:ctagmod_start 3940352 962 mm/memory.c:4214 func:alloc_anon_folio 2894464 22613 fs/kernfs/dir.c:615 func:__kernfs_new_node ... Usage: kconfig options: - CONFIG_MEM_ALLOC_PROFILING - CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT - CONFIG_MEM_ALLOC_PROFILING_DEBUG adds warnings for allocations that weren't accounted because of a missing annotation sysctl: /proc/sys/vm/mem_profiling Runtime info: /proc/allocinfo Notes: [1]: Overhead To measure the overhead we are comparing the following configurations: (1) Baseline with CONFIG_MEMCG_KMEM=n (2) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) (3) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) (4) Enabled at runtime (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n && /proc/sys/vm/mem_profiling=1) (5) Baseline with CONFIG_MEMCG_KMEM=y && allocating with __GFP_ACCOUNT (6) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) && CONFIG_MEMCG_KMEM=y (7) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) && CONFIG_MEMCG_KMEM=y Performance overhead: To evaluate performance we implemented an in-kernel test executing multiple get_free_page/free_page and kmalloc/kfree calls with allocation sizes growing from 8 to 240 bytes with CPU frequency set to max and CPU affinity set to a specific CPU to minimize the noise. Below are results from running the test on Ubuntu 22.04.2 LTS with 6.8.0-rc1 kernel on 56 core Intel Xeon: kmalloc pgalloc (1 baseline) 6.764s 16.902s (2 default disabled) 6.793s (+0.43%) 17.007s (+0.62%) (3 default enabled) 7.197s (+6.40%) 23.666s (+40.02%) (4 runtime enabled) 7.405s (+9.48%) 23.901s (+41.41%) (5 memcg) 13.388s (+97.94%) 48.460s (+186.71%) (6 def disabled+memcg) 13.332s (+97.10%) 48.105s (+184.61%) (7 def enabled+memcg) 13.446s (+98.78%) 54.963s (+225.18%) Memory overhead: Kernel size: text data bss dec diff (1) 26515311 18890222 17018880 62424413 (2) 26524728 19423818 16740352 62688898 264485 (3) 26524724 19423818 16740352 62688894 264481 (4) 26524728 19423818 16740352 62688898 264485 (5) 26541782 18964374 16957440 62463596 39183 Memory consumption on a 56 core Intel CPU with 125GB of memory: Code tags: 192 kB PageExts: 262144 kB (256MB) SlabExts: 9876 kB (9.6MB) PcpuExts: 512 kB (0.5MB) Total overhead is 0.2% of total memory. Benchmarks: Hackbench tests run 100 times: hackbench -s 512 -l 200 -g 15 -f 25 -P baseline disabled profiling enabled profiling avg 0.3543 0.3559 (+0.0016) 0.3566 (+0.0023) stdev 0.0137 0.0188 0.0077 hackbench -l 10000 baseline disabled profiling enabled profiling avg 6.4218 6.4306 (+0.0088) 6.5077 (+0.0859) stdev 0.0933 0.0286 0.0489 stress-ng tests: stress-ng --class memory --seq 4 -t 60 stress-ng --class cpu --seq 4 -t 60 Results posted at: https://evilpiepirate.org/~kent/memalloc_prof_v4_stress-ng/ [2] https://lore.kernel.org/all/20240306182440.2003814-1-surenb@google.com/ This patch (of 37): The next patch drops vmalloc.h from a system header in order to fix a circular dependency; this adds it to all the files that were pulling it in implicitly. [kent.overstreet@linux.dev: fix arch/alpha/lib/memcpy.c] Link: https://lkml.kernel.org/r/20240327002152.3339937-1-kent.overstreet@linux.dev [surenb@google.com: fix arch/x86/mm/numa_32.c] Link: https://lkml.kernel.org/r/20240402180933.1663992-1-surenb@google.com [kent.overstreet@linux.dev: a few places were depending on sizes.h] Link: https://lkml.kernel.org/r/20240404034744.1664840-1-kent.overstreet@linux.dev [arnd@arndb.de: fix mm/kasan/hw_tags.c] Link: https://lkml.kernel.org/r/20240404124435.3121534-1-arnd@kernel.org [surenb@google.com: fix arc build] Link: https://lkml.kernel.org/r/20240405225115.431056-1-surenb@google.com Link: https://lkml.kernel.org/r/20240321163705.3067592-1-surenb@google.com Link: https://lkml.kernel.org/r/20240321163705.3067592-2-surenb@google.com Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Tested-by: Kees Cook <keescook@chromium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Gary Guo <gary@garyguo.net> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-25drm/print: drop include debugfs.h and include where neededJani Nikula1-0/+2
Surprisingly many places depend on debugfs.h to be included via drm_print.h. Fix them. v3: Also fix armada, ite-it6505, imagination, msm, sti, vc4, and xe v2: Also fix ivpu and vmwgfx Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240410141434.157908-1-jani.nikula@intel.com Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm Acked-by: Matt Coster <matt.coster@imgtec.com> # drm/imagination Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Robert Foss <rfoss@kernel.org> #drm/bridge Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422121011.4133236-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-08accel/ivpu: Fix deadlock in context_xaJacek Lawrynowicz1-1/+1
ivpu_device->context_xa is locked both in kernel thread and IRQ context. It requires XA_FLAGS_LOCK_IRQ flag to be passed during initialization otherwise the lock could be acquired from a thread and interrupted by an IRQ that locks it for the second time causing the deadlock. This deadlock was reported by lockdep and observed in internal tests. Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Cc: <stable@vger.kernel.org> # v6.3+ Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-9-jacek.lawrynowicz@linux.intel.com
2024-04-08accel/ivpu: Fix missed error message after VPU renameJacek Lawrynowicz1-1/+1
Change "VPU" to "NPU" in ivpu_suspend() so it matches all other error messages. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-8-jacek.lawrynowicz@linux.intel.com
2024-04-08accel/ivpu: Return max freq for DRM_IVPU_PARAM_CORE_CLOCK_RATEJacek Lawrynowicz4-20/+17
DRM_IVPU_PARAM_CORE_CLOCK_RATE returns current NPU frequency which could be 0 if device was sleeping. This value isn't really useful to the user space, so return max freq instead which can be used to estimate NPU performance. Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up") Cc: <stable@vger.kernel.org> # v6.7 Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-7-jacek.lawrynowicz@linux.intel.com
2024-04-08accel/ivpu: Improve clarity of MMU error messagesWachowski, Karol1-4/+4
This patch improves readability and clarity of MMU error messages. Previously, the error strings were somewhat confusing and could lead to ambiguous interpretations, making it difficult to diagnose issues. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-6-jacek.lawrynowicz@linux.intel.com
2024-04-08accel/ivpu: Put NPU back to D3hot after failed resumeJacek Lawrynowicz1-0/+1
Put NPU in D3hot after ivpu_resume() fails to power up the device. This will assure that D3->D0 power cycle will be performed before the next resume and also will minimize power usage in this corner case. Fixes: 28083ff18d3f ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery") Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-5-jacek.lawrynowicz@linux.intel.com
2024-04-08accel/ivpu: Fix PCI D0 state entry in resumeWachowski, Karol1-2/+2
In case of failed power up we end up left in PCI D3hot state making it impossible to access NPU registers on retry. Enter D0 state on retry before proceeding with power up sequence. Fixes: 28083ff18d3f ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery") Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-4-jacek.lawrynowicz@linux.intel.com
2024-04-08accel/ivpu: Remove d3hot_after_power_off WAJacek Lawrynowicz4-20/+14
Always enter D3hot after entering D0i3 an all platforms. This minimizes power usage. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-3-jacek.lawrynowicz@linux.intel.com
2024-04-08accel/ivpu: Check return code of ipc->lock initWachowski, Karol1-2/+6
Return value of drmm_mutex_init(ipc->lock) was unchecked. Fixes: 5d7422cfb498 ("accel/ivpu: Add IPC driver and JSM messages") Cc: <stable@vger.kernel.org> # v6.3+ Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-2-jacek.lawrynowicz@linux.intel.com
2024-03-14Merge tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds14-128/+194
Pull drm updates from Dave Airlie: "Highlights are usual, more AMD IP blocks for future hw, i915/xe changes, Displayport tunnelling support for i915, msm YUV over DP changes, new tests for ttm, but its mostly a lot of stuff all over the place from lots of people. core: - EDID cleanups - scheduler error handling fixes - managed: add drmm_release_action() with tests - add ratelimited drm debug print - DPCD PSR early transport macro - DP tunneling and bandwidth allocation helpers - remove built-in edids - dp: Avoid AUX transfers on powered-down displays - dp: Add VSC SDP helpers cross drivers: - use new drm print helpers - switch to ->read_edid callback - gem: add stats for shared buffers plus updates to amdgpu, i915, xe syncobj: - fixes to waiting and sleeping ttm: - add tests - fix errno codes - simply busy-placement handling - fix page decryption media: - tc358743: fix v4l device registration video: - move all kernel parameters for video behind CONFIG_VIDEO sound: - remove <drm/drm_edid.h> include from header ci: - add tests for msm - fix apq8016 runner efifb: - use copy of global screen_info state vesafb: - use copy of global screen_info state simplefb: - fix logging bridge: - ite-6505: fix DP link-training bug - samsung-dsim: fix error checking in probe - samsung-dsim: add bsh-smm-s2/pro boards - tc358767: fix regmap usage - imx: add i.MX8MP HDMI PVI plus DT bindings - imx: add i.MX8MP HDMI TX plus DT bindings - sii902x: fix probing and unregistration - tc358767: limit pixel PLL input range - switch to new drm_bridge_read_edid() interface panel: - ltk050h3146w: error-handling fixes - panel-edp: support delay between power-on and enable; use put_sync in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings - add BOE TH101MB31IG002-28A plus DT bindings - add EDT ETML1010G3DRA plus DT bindings - add Novatek NT36672E LCD DSI plus DT bindings - nt36523: support 120Hz timings, fix includes - simple: fix display timings on RK32FN48H - visionox-vtdr6130: fix initialization - add Powkiddy RGB10MAX3 plus DT bindings - st7703: support panel rotation plus DT bindings - add Himax HX83112A plus DT bindings - ltk500hd1829: add support for ltk101b4029w and admatec 9904370 - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs panel-orientation-quirks: - GPD Win Mini amdgpu: - Validate DMABuf imports in compute VMs - Add RAS ACA framework - PSP 13 fixes - Misc code cleanups - Replay fixes - Atom interpretor PS, WS bounds checking - DML2 fixes - Audio fixes - DCN 3.5 Z state fixes - Remove deprecated ida_simple usage - UBSAN fixes - RAS fixes - Enable seq64 infrastructure - DC color block enablement - Documentation updates - DC documentation updates - DMCUB updates - ATHUB 4.1 support - LSDMA 7.0 support - JPEG DPG support - IH 7.0 support - HDP 7.0 support - VCN 5.0 support - SMU 13.0.6 updates - NBIO 7.11 updates - SDMA 6.1 updates - MMHUB 3.3 updates - DCN 3.5.1 support - NBIF 6.3.1 support - VPE 6.1.1 support amdkfd: - Validate DMABuf imports in compute VMs - SVM fixes - Trap handler updates and enhancements - Fix cache size reporting - Relocate the trap handler radeon: - Atom interpretor PS, WS bounds checking - Misc code cleanups xe: - new query for GuC submission version - Remove unused persistent exec_queues - Add vram frequency sysfs attributes - Add the flag XE_VM_BIND_FLAG_DUMPABLE - Drop pre-production workarounds - Drop kunit tests for unsupported platforms - Start pumbling SR-IOV support with memory based interrupts for VF - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC to work with memory based interrupts - Add GuC Doorbells Manager as prep work SR-IOV - Implement additional workarounds for xe2 and MTL - Program a few registers according to perfomance guide spec for Xe2 - Fix remaining 32b build issues and enable it back - Fix build with CONFIG_DEBUG_FS=n - Fix warnings from GuC ABI headers - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF - Release mmap mappings on rpm suspend - Disable mid-thread preemption when not properly supported by hardware - Fix xe_exec by reserving extra fence slot for CPU bind - Fix xe_exec with full long running exec queue - Canonicalize addresses where needed for Xe2 and add to devcoredum - Toggle USM support for Xe2 - Only allow 1 ufence per exec / bind IOCTL - Add GuC firmware loading for Lunar Lake - Add XE_VMA_PTE_64K VMA flag i915: - Add more ADL-N PCI IDs - Enable fastboot also on older platforms - Early transport for panel replay and PSR - New ARL PCI IDs - DP TPS4 PHY test pattern support - Unify and improve VSC SDP for PSR and non-PSR cases - Refactor memory regions and improve debug logging - Rework global state serialization - Remove unused CDCLK divider fields - Unify HDCP connector logging format - Use display instead of graphics version in display code - Move VBT and opregion debugfs next to the implementation - Abstract opregion interface, use opaque type - MTL fixes - HPD handling fixes - Add GuC submission interface version query - Atomically invalidate userptr on mmu-notifier - Update handling of MMIO triggered reports - Don't make assumptions about intel_wakeref_t type - Extend driver code of Xe_LPG to Xe_LPG+ - Add flex arrays to struct i915_syncmap - Allow for very slow HuC loading - DP tunneling and bandwidth allocation support msm: - Correct bindings for MSM8976 and SM8650 platforms - Start migration of MDP5 platforms to DPU driver - X1E80100 MDSS support - DPU: - Improve DSC allocation, fixing several important corner cases - Add support for SDM630/SDM660 platforms - Simplify dpu_encoder_phys_ops - Apply fixes targeting DSC support with a single DSC encoder - Apply fixes for HCTL_EN timing configuration - X1E80100 support - Add support for YUV420 over DP - GPU: - fix sc7180 UBWC config - fix a7xx LLC config - new gpu support: a305B, a750, a702 - machine support: SM7150 (different power levels than other a618) - a7xx devcoredump support habanalabs: - configure IRQ affinity according to NUMA node - move HBM MMU page tables inside the HBM - improve device reset - check extended PCIe errors ivpu: - updates to firmware API - refactor BO allocation imx: - use devm_ functions during init hisilicon: - fix EDID includes mgag200: - improve ioremap usage - convert to struct drm_edid - Work around PCI write bursts nouveau: - disp: use kmemdup() - fix EDID includes - documentation fixes qaic: - fixes to BO handling - make use of DRM managed release - fix order of remove operations rockchip: - analogix_dp: get encoder port from DT - inno_hdmi: support HDMI for RK3128 - lvds: error-handling fixes ssd130x: - support SSD133x plus DT bindings tegra: - fix error handling tilcdc: - make use of DRM managed release v3d: - show memory stats in debugfs - Support display MMU page size vc4: - fix error handling in plane prepare_fb - fix framebuffer test in plane helpers virtio: - add venus capset defines vkms: - fix OOB access when programming the LUT - Kconfig improvements vmwgfx: - unmap surface before changing plane state - fix memory leak in error handling - documentation fixes - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid - fix null-pointer deref in execbuf - refactor display-mode probing - fix fencing for creating cursor MOBs - fix cursor-memory lifetime xlnx: - fix live video input for ZynqMP DPSUB lima: - fix memory leak loongson: - fail if no VRAM present meson: - switch to new drm_bridge_read_edid() interface renesas: - add RZ/G2L DU support plus DT bindings mxsfb: - Use managed mode config sun4i: - HDMI: updates to atomic mode setting mediatek: - Add display driver for MT8188 VDOSYS1 - DSI driver cleanups - Filter modes according to hardware capability - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip etnaviv: - enhancements for NPU and MRT support" * tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits) drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo drm/amd/pm: wait for completion of the EnableGfxImu message drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1 drm/amdgpu: add smu 14.0.1 support drm/amdgpu: add VPE 6.1.1 discovery support drm/amdgpu/vpe: add VPE 6.1.1 support drm/amdgpu/vpe: don't emit cond exec command under collaborate mode drm/amdgpu/vpe: add collaborate mode support for VPE drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE drm/amdgpu/vpe: add multi instance VPE support drm/amdgpu/discovery: add nbif v6_3_1 ip block drm/amdgpu: Add nbif v6_3_1 ip block support drm/amdgpu: Add pcie v6_1_0 ip headers (v5) drm/amdgpu: Add nbif v6_3_1 ip headers (v5) arch/powerpc: Remove <linux/fb.h> from backlight code macintosh/via-pmu-backlight: Include <linux/backlight.h> fbdev/chipsfb: Include <linux/backlight.h> drm/etnaviv: Restore some id values drm/amdkfd: make kfd_class constant drm/amdgpu: add ring timeout information in devcoredump ...
2024-03-13Merge tag 'pm-6.9-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "From the functional perspective, the most significant change here is the addition of support for Energy Models that can be updated dynamically at run time. There is also the addition of LZ4 compression support for hibernation, the new preferred core support in amd-pstate, new platforms support in the Intel RAPL driver, new model-specific EPP handling in intel_pstate and more. Apart from that, the cpufreq default transition delay is reduced from 10 ms to 2 ms (along with some related adjustments), the system suspend statistics code undergoes a significant rework and there is a usual bunch of fixes and code cleanups all over. Specifics: - Allow the Energy Model to be updated dynamically (Lukasz Luba) - Add support for LZ4 compression algorithm to the hibernation image creation and loading code (Nikhil V) - Fix and clean up system suspend statistics collection (Rafael Wysocki) - Simplify device suspend and resume handling in the power management core code (Rafael Wysocki) - Fix PCI hibernation support description (Yiwei Lin) - Make hibernation take set_memory_ro() return values into account as appropriate (Christophe Leroy) - Set mem_sleep_current during kernel command line setup to avoid an ordering issue with handling it (Maulik Shah) - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a driver's system suspend callback (Qingliang Li) - Simplify pm_runtime_get_if_active() usage and add a replacement for pm_runtime_put_autosuspend() (Sakari Ailus) - Add a tracepoint for runtime_status changes tracking (Vilas Bhat) - Fix section title markdown in the runtime PM documentation (Yiwei Lin) - Enable preferred core support in the amd-pstate cpufreq driver (Meng Li) - Fix min_perf assignment in amd_pstate_adjust_perf() and make the min/max limit perf values in amd-pstate always stay within the (highest perf, lowest perf) range (Tor Vic, Meng Li) - Allow intel_pstate to assign model-specific values to strings used in the EPP sysfs interface and make it do so on Meteor Lake (Srinivas Pandruvada) - Drop long-unused cpudata::prev_cummulative_iowait from the intel_pstate cpufreq driver (Jiri Slaby) - Prevent scaling_cur_freq from exceeding scaling_max_freq when the latter is an inefficient frequency (Shivnandan Kumar) - Change default transition delay in cpufreq to 2ms (Qais Yousef) - Remove references to 10ms minimum sampling rate from comments in the cpufreq code (Pierre Gondois) - Honour transition_latency over transition_delay_us in cpufreq (Qais Yousef) - Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar) - General enhancements / cleanups to ARM cpufreq drivers (tianyu2, Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia Belova) - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan) - Make the SCMI cpufreq driver get a transition delay value from firmware (Pierre Gondois) - Prevent the haltpoll cpuidle governor from shrinking guest poll_limit_ns below grow_start (Parshuram Sangle) - Avoid potential overflow in integer multiplication when computing cpuidle state parameters (C Cheng) - Adjust MWAIT hint target C-state computation in the ACPI cpuidle driver and in intel_idle to return a correct value for C0 (He Rongguang) - Address multiple issues in the TPMI RAPL driver and add support for new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui) - Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel Lezcano) - Fix kernel-doc for dtpm_create_hierarchy() (Yang Li) - Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth Norway Ananda) - Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil) - Fix a couple of warnings in the OPP core code related to W=1 builds (Viresh Kumar) - Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh Kumar) - Extend dev_pm_opp_data with turbo support (Sibi Sankar) - dt-bindings: drop maxItems from inner items (David Heidelberg)" * tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits) dt-bindings: opp: drop maxItems from inner items OPP: debugfs: Fix warning around icc_get_name() OPP: debugfs: Fix warning with W=1 builds cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h OPP: Extend dev_pm_opp_data with turbo support Fix cpupower-frequency-info.1 man page typo cpufreq: scmi: Set transition_delay_us firmware: arm_scmi: Populate fast channel rate_limit firmware: arm_scmi: Populate perf commands rate_limit cpuidle: ACPI/intel: fix MWAIT hint target C-state computation PM: sleep: wakeirq: fix wake irq warning in system suspend powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function cpufreq: Don't unregister cpufreq cooling on CPU hotplug PM: suspend: Set mem_sleep_current during kernel command line setup cpufreq: Honour transition_latency over transition_delay_us cpufreq: Limit resolving a frequency to policy min/max Documentation: PM: Fix runtime_pm.rst markdown syntax cpufreq: amd-pstate: adjust min/max limit perf cpufreq: Remove references to 10ms min sampling rate cpufreq: intel_pstate: Update default EPPs for Meteor Lake ...
2024-03-11Merge branch 'pm-runtime'Rafael J. Wysocki1-1/+1
Merge changes related to the runtime power management of devices for 6.9-rc1: - Simplify pm_runtime_get_if_active() usage and add a replacement for pm_runtime_put_autosuspend() (Sakari Ailus). - Add a tracepoint for runtime_status changes tracking (Vilas Bhat). - Fix section title markdown in the runtime PM documentation (Yiwei Lin). * pm-runtime: Documentation: PM: Fix runtime_pm.rst markdown syntax PM: runtime: add tracepoint for runtime_status changes PM: runtime: Add pm_runtime_put_autosuspend() replacement PM: runtime: Simplify pm_runtime_get_if_active() usage
2024-02-26Merge v6.8-rc6 into drm-nextDaniel Vetter7-57/+83
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches, there's a few same-area-changed conflicts (xe and amdgpu mostly) that are getting a bit too annoying. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-02-20accel/ivpu: Don't enable any tiles by default on VPU40xxAndrzej Kacprowski1-1/+1
There is no point in requesting 1 tile on VPU40xx as the FW will probably need more tiles to run workloads, so it will have to reconfigure PLL anyway. Don't enable any tiles and allow the FW to perform initial tile configuration. This improves NPU boot stability as the tiles are always enabled only by the FW from the same initial state. Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4") Cc: stable@vger.kernel.org Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240220131624.1447813-1-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Rename VPU to NPU in message stringsJacek Lawrynowicz7-22/+22
VPU was renamed to NPU but due to large overhead of renaming all the sources only user visible messages are being updated. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-9-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Refactor BO creation functionsWachowski, Karol5-60/+71
Rename BO allocate/create functions, so the code is more consistent. There are now two matching buffer creation functions: - ivpu_bo_create_ioctl() - create a BO from user space - ivpu_bo_create() - create a BO from kernel space ivpu_bo_alloc() is now only used to allocate struct ivpu_bo which better matches its name. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-8-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Fix ivpu_reset_engine_fn merge issueJacek Lawrynowicz1-16/+16
ivpu_reset_engine_fn and ivpu_reset_engine_fops were separated during merge so move them back together to keep the file consistent. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-7-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Use lazy allocation for doorbell IDsWachowski, Karol3-3/+22
Reserve/allocate and free doorbells for command queues when needed using xarray. This allows to avoid reserving a doorbell for a contexts that never issues a job. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-6-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Add support for FW boot param system_time_usKrystian Pradzynski1-0/+6
Add support for FW boot API param system_time_us. According to the API description this field should be set to system time in microseconds starting from 1970. Signed-off-by: Krystian Pradzynski <krystian.pradzynski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-5-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Update FW API headersJacek Lawrynowicz2-23/+55
Update Boot API to 3.22.0 and JSM API to 3.15.6 Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-4-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Remove legacy firmware nameJacek Lawrynowicz1-2/+0
We are now using NPU IP generation based FW names instead of platform code names, so mtl_vpu.bin can be removed. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-3-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Rename TILE_SKU_BOTH_MTL to TILE_SKU_BOTHJacek Lawrynowicz1-2/+2
Remove legacy postfix from TILE_SKU_BOTH macro. This was missed when renaming MTL to VPU37XX. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-2-jacek.lawrynowicz@linux.intel.com
2024-02-12PM: runtime: Simplify pm_runtime_get_if_active() usageSakari Ailus1-1/+1
There are two ways to opportunistically increment a device's runtime PM usage count, calling either pm_runtime_get_if_active() or pm_runtime_get_if_in_use(). The former has an argument to tell whether to ignore the usage count or not, and the latter simply calls the former with ign_usage_count set to false. The other users that want to ignore the usage_count will have to explicitly set that argument to true which is a bit cumbersome. To make this function more practical to use, remove the ign_usage_count argument from the function. The main implementation is in a static function called pm_runtime_get_conditional() and implementations of pm_runtime_get_if_active() and pm_runtime_get_if_in_use() are moved to runtime.c. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Takashi Iwai <tiwai@suse.de> # sound/ Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> # drivers/accel/ivpu/ Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # drivers/gpu/drm/i915/ Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-02-12accel/ivpu: Fix DevTLB errors on suspend/resume and recoveryJacek Lawrynowicz2-29/+54
Issue IP reset before shutdown in order to complete all upstream requests to the SOC. Without this DevTLB is complaining about incomplete transactions and NPU cannot resume from suspend. This problem is only happening on recent IFWI releases. IP reset in rare corner cases can mess up PCI configuration, so save it before the reset. After this happens it is also impossible to issue PLL requests and D0->D3->D0 cycle is needed to recover the NPU. Add WP 0 request on power up, so the PUNIT is always notified about NPU reset. Use D0/D3 cycle for recovery as it can recover from failed IP reset and FLR cannot. Fixes: 3f7c0634926d ("accel/ivpu/37xx: Fix hangs related to MMIO reset") Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240207102446.3126981-1-jacek.lawrynowicz@linux.intel.com
2024-02-06accel/ivpu: Add job status for jobs aborted by the driverGrzegorz Trzebiatowski1-2/+2
Add DRM_IVPU_JOB_STATUS_ABORTED to indicate that the job was aborted by the driver due to e.g. TDR or user context MMU faults. This will help UMD and tests distinguish if job was aborted by the FW or the driver. Signed-off-by: Grzegorz Trzebiatowski <grzegorz.trzebiatowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-8-jacek.lawrynowicz@linux.intel.com
2024-02-06accel/ivpu/40xx: Stop passing SKU boot parameters to FWKrystian Pradzynski1-5/+0
This parameter was never used by the 40xx FW. Signed-off-by: Krystian Pradzynski <krystian.pradzynski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-7-jacek.lawrynowicz@linux.intel.com
2024-02-06accel/ivpu/40xx: Enable D0i3 messageKrystian Pradzynski1-1/+0
All recent 40xx firmware already supports D0i3 entry message and this WA is no longer needed. Signed-off-by: Krystian Pradzynski <krystian.pradzynski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-6-jacek.lawrynowicz@linux.intel.com
2024-02-06accel/ivpu: Disable d3hot_delay on all NPU generationsJacek Lawrynowicz1-3/+2
NPU does not require this delay regardless of the generation. All generations are integrated into the SOC. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-4-jacek.lawrynowicz@linux.intel.com
2024-02-06accel/ivpu: Correct MMU queue size checking functionsWachowski, Karol1-11/+22
Do not use kernel CIRC_SPACE and CIRC_CNT that incorrectly return space of a queue when wrap bit was set. Use correct implementation that compares producer, consumer and wrap bit values. Without this fix it was possible to lose events in case when event queue was full. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-3-jacek.lawrynowicz@linux.intel.com
2024-02-06accel/ivpu: Force snooping for MMU writesWachowski, Karol3-5/+2
Set AW_SNOOP_OVERRIDE bit in VPU_37/40XX_HOST_IF_TCU_PTW_OVERRIDES to force snooping for MMU write accesses (setting event queue events). MMU event queue buffer is the only buffer written by MMU and mapped as write-back which break cache coherency. Force write transactions to be snooped solving the problem. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-2-jacek.lawrynowicz@linux.intel.com
2024-01-25accel/ivpu: Improve recovery and reset supportJacek Lawrynowicz8-48/+70
- Synchronize job submission with reset/recovery using reset_lock - Always print recovery reason and call diagnose_failure() - Don't allow for autosupend during recovery - Prevent immediate autosuspend after reset/recovery - Prevent force_recovery for issuing TDR when device is suspended - Reset VPU instead triggering recovery after changing debugfs params Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240122120945.1150728-4-jacek.lawrynowicz@linux.intel.com
2024-01-25accel/ivpu: Improve stability of ivpu_submit_ioctl()Jacek Lawrynowicz2-78/+62
- Wake up the device as late as possible - Remove job reference counting in order to simplify the code - Don't put jobs that are not fully submitted on submitted_jobs_xa in order to avoid potential races with reset/recovery Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240122120945.1150728-3-jacek.lawrynowicz@linux.intel.com
2024-01-25accel/ivpu: Fix dev open/close races with unbindJacek Lawrynowicz6-65/+85
- Add context_list_lock to synchronize user context addition/removal - Use drm_dev_enter() to prevent unbinding the device during ivpu_open() and vpu address allocation Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240122120945.1150728-2-jacek.lawrynowicz@linux.intel.com
2024-01-22accel/ivpu: Disable PLL after VPU IP reset during FLRJacek Lawrynowicz1-2/+19
IP reset has to followed by ivpu_pll_disable() to properly enter reset state. Fixes: 828d63042aec ("accel/ivpu: Don't enter d0i3 during FLR") Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231024165353.761507-1-stanislaw.gruszka@linux.intel.com
2024-01-22accel/ivpu: Deprecate DRM_IVPU_PARAM_CONTEXT_PRIORITY paramWachowski, Karol3-12/+3
DRM_IVPU_PARAM_CONTEXT_PRIORITY has been deprecated because it has been replaced with DRM_IVPU_JOB_PRIORITY levels set with submit IOCTL and was unused anyway. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-10-jacek.lawrynowicz@linux.intel.com
2024-01-22accel/ivpu: Improve buffer object debug logsJacek Lawrynowicz2-42/+22
Make debug logs more readable and consistent: - don't print handle as it is not always available for all buffers - use hashed ivpu_bo ptr as main buffer identifier - remove unused fields from ivpu_bo_print_info() Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-9-jacek.lawrynowicz@linux.intel.com
2024-01-22accel/ivpu: Disable buffer sharing among VPU contextsJacek Lawrynowicz1-38/+6
This was not supported properly. A buffer was imported to another VPU context as a separate buffer object with duplicated sgt. Both exported and imported buffers could be DMA mapped causing a double mapping on the same device. Buffers imported from another VPU context will now just increase reference count, leaving only a single sgt, fixing the problem above. Buffers still can't be shared among VPU contexts because each has its own MMU mapping and ivpu_bo only supports single MMU mappings. The solution would be to use a mapping list as in panfrost or etnaviv drivers and it will be implemented in future if required. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-8-jacek.lawrynowicz@linux.intel.com
2024-01-22accel/ivpu: Free buffer sgt on unbindJacek Lawrynowicz1-2/+12
Call dma_unmap() on all buffers before the VPU is unbinded to avoid "device driver has pending DMA allocations while released from device" warning when DMA-API debug is enabled. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-7-jacek.lawrynowicz@linux.intel.com
2024-01-22accel/ivpu: Fix for missing lock around drm_gem_shmem_vmap()Jacek Lawrynowicz1-0/+5
drm_gem_shmem_vmap/vunmap requires dma resv lock to be held. This was missed during conversion to shmem helper. Fixes: 8d88e4cdce4f ("accel/ivpu: Use GEM shmem helper for all buffers") Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-6-jacek.lawrynowicz@linux.intel.com
2024-01-22accel/ivpu: Add diagnostic messages when VPU fails to boot or suspendWachowski, Karol2-3/+6
Make boot/suspend failure debugging easier by dumping FW logs and error registers. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-5-jacek.lawrynowicz@linux.intel.com
2024-01-22accel/ivpu: Add debug prints for MMU map/unmap operationsWachowski, Karol2-0/+10
It is common need to be able to see IOVA/physical to VPU addresses mappings. Especially when debugging different kind of memory related issues. Lack of such logs forces user to modify and recompile KMD manually. This commit adds those logs under MMU debug mask which can be turned on dynamically with module param during KMD load. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-4-jacek.lawrynowicz@linux.intel.com
2024-01-22accel/ivpu: Call diagnose failure in ivpu_mmu_cmdq_sync()Wachowski, Karol1-0/+2
Check for possible failure reasons in the buttress. Some errors (like external abort) should have corresponding buttress errors registers set indicating the real reason of failure. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-3-jacek.lawrynowicz@linux.intel.com
2024-01-22accel/ivpu: Dump MMU events in case of VPU boot timeoutWachowski, Karol3-0/+10
Add ivpu_mmu_evtq_dump() function that dumps existing MMU events from MMU event queue. Call this function if VPU boot failed. Previously MMU events were only checked in interrupt handler, but if VPU failed to boot due to MMU faults, those faults were missed because of interrupts not yet being enabled. This will allow checking potential fault reason of VPU not booting. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-2-jacek.lawrynowicz@linux.intel.com
2024-01-12Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds25-900/+1326
Pull drm updates from Dave Airlie: "This contains two major new drivers: - imagination is a first driver for Imagination Technologies devices, it only covers very specific devices, but there is hope to grow it - xe is a reboot of the i915 GPU (shares display) side using a more upstream focused development model, and trying to maximise code sharing. It's not enabled for any hw by default, and will hopefully get switched on for Intel's Lunarlake. This also drops a bunch of the old UMS ioctls. It's been dead long enough. amdgpu has a bunch of new color management code that is being used in the Steam Deck. amdgpu also has a new ACPI WBRF interaction to help avoid radio interference. Otherwise it's the usual lots of changes in lots of places. Detailed summary: new drivers: - imagination - new driver for Imagination Technologies GPU - xe - new driver for Intel GPUs using core drm concepts core: - add CLOSE_FB ioctl - remove old UMS ioctls - increase max objects to accomodate AMD color mgmt encoder: - create per-encoder debugfs directory edid: - split out drm_eld - SAD helpers - drop edid_firmware module parameter format-helper: - cache format conversion buffers sched: - move from kthread to workqueue - rename some internals - implement dynamic job-flow control gpuvm: - provide more features to handle GEM objects client: - don't acquire module reference displayport: - add mst path property documentation fdinfo: - alignment fix dma-buf: - add fence timestamp helper - add fence deadline support bridge: - transparent aux-bridge for DP/USB-C - lt8912b: add suspend/resume support and power regulator support panel: - edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49 - chromebook panel support - elida-kd35t133: rework pm - powkiddy RK2023 panel - himax-hx8394: drop prepare/unprepare and shutdown logic - BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G - Evervision VGG644804, SDC ATNA45AF01 - nv3052c: register docs, init sequence fixes, fascontek FS035VG158 - st7701: Anbernic RG-ARC support - r63353 panel controller - Ilitek ILI9805 panel controller - AUO G156HAN04.0 simplefb: - support memory regions - support power domains amdgpu: - add new 64-bit sequence number infrastructure - add AMD specific color management - ACPI WBRF support for RF interference handling - GPUVM updates - RAS updates - DCN 3.5 updates - Rework PCIe link speed handling - Document GPU reset types - DMUB fixes - eDP fixes - NBIO 7.9/7.11 updates - SubVP updates - XGMI PCIe state dumping for aqua vanjaram - GFX11 golden register updates - enable tunnelling on high pri compute amdkfd: - Migrate TLB flushing logic to amdgpu - Trap handler fixes - Fix restore workers handling on suspend/resume - Fix possible memory leak in pqm_uninit() - support import/export of dma-bufs using GEM handles radeon: - fix possible overflows in command buffer checking - check for errors in ring_lock i915: - reorg display code for reuse in xe driver - fdinfo memory stats printing - DP MST bandwidth mgmt improvements - DP panel replay enabling - MTL C20 phy state verification - MTL DP DSC fractional bpp support - Audio fastset support - use dma_fence interfaces instead of i915_sw_fence - Separate gem and display code - AUX register macro refactoring - Separate display module/device parameters - Move display capabilities debugfs under display - Makefile cleanups - Register cleanups - Move display lock inits under display/ - VLV/CHV DPIO PHY register and interface refactoring - DSI VBT sequence refactoring - C10/C20 PHY PLL hardware readout - DPLL code cleanups - Cleanup PXP plane protection checks - Improve display debug msgs - PSR selective fetch fixes/improvements - DP MST fixes - Xe2LPD FBC restrictions removed - DGFX uses direct VBT pin mapping - more MTL WAs - fix MTL eDP bug - eliminate use of kmap_atomic habanalabs: - sysfs entry to identify a device minor id with debugfs path - sysfs entry to expose device module id - add signed device info retrieval through INFO ioctl - add Gaudi2C device support - pcie reset prepare/done hooks msm: - Add support for SDM670, SM8650 - Handle the CFG interconnect to fix the obscure hangs / timeouts - Kconfig fix for QMP dependency - use managed allocators - DPU: SDM670, SM8650 support - DPU: Enable SmartDMA on SM8350 and SM8450 - DP: enable runtime PM support - GPU: add metadata UAPI - GPU: move devcoredumps to GPU device - GPU: convert to drm_exec ivpu: - update FW API - new debugfs file - a new NOP job submission test mode - improve suspend/resume - PM improvements - MMU PT optimizations - firmware profile frequency support - support for uncached buffers - switch to gem shmem helpers - replace kthread with threaded irqs rockchip: - rk3066_hdmi: convert to atomic - vop2: support nv20 and nv30 - rk3588 support mediatek: - use devm_platform_ioremap_resource - stop using iommu_present - MT8188 VDOSYS1 display support panfrost: - PM improvements - improve interrupt handling as poweroff qaic: - allow to run with single MSI - support host/device time sync - switch to persistent DRM devices exynos: - fix potential error pointer dereference - fix wrong error checking - add missing call to drm_atomic_helper_shutdown omapdrm: - dma-fence lockdep annotation fix tidss: - dma-fence lockdep annotation fix - support for AM62A7 v3d: - BCM2712 - rpi5 support - fdinfo + gputop support - uapi for CPU job handling virtio-gpu: - add context debug name" * tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits) drm/amd/display: Allow z8/z10 from driver drm/amd/display: fix bandwidth validation failure on DCN 2.1 drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm drm/amd/display: Fix recent checkpatch errors in amdgpu_dm Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole" drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings() drm/amd/display: Fix power_helpers.c codestyle drm/amd/display: Fix hdcp_log.h codestyle drm/amd/display: Fix hdcp2_execution.c codestyle drm/amd/display: Fix hdcp_psp.h codestyle drm/amd/display: Fix freesync.c codestyle drm/amd/display: Fix hdcp_psp.c codestyle drm/amd/display: Fix hdcp1_execution.c codestyle drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()' drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()' drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()' drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()' ...
2023-12-11accel/ivpu/37xx: Fix interrupt_clear_with_0 WA initializationAndrzej Kacprowski1-3/+9
Using PCI Device ID/Revision to initialize the interrupt_clear_with_0 workaround is problematic - there are many pre-production steppings with different behavior, even with the same PCI ID/Revision Instead of checking for PCI Device ID/Revision, check the VPU buttress interrupt status register behavior - if this register is not zero after writing 1s it means there register is RW instead of RW1C and we need to enable the interrupt_clear_with_0 workaround. Fixes: 7f34e01f77f8 ("accel/ivpu: Clear specific interrupt status bits on C0") Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/all/20231204122331.40560-1-jacek.lawrynowicz@linux.intel.com
2023-11-28Merge v6.7-rc3 into drm-nextDaniel Vetter1-22/+21
Thomas Zimermann needs 8d6ef26501 ("drm/ast: Disconnect BMC if physical connector is connected") for further ast work in -next. Minor conflicts in ivpu between 3de6d9597892 ("accel/ivpu: Pass D0i3 residency time to the VPU firmware") and 3f7c0634926d ("accel/ivpu/37xx: Fix hangs related to MMIO reset") changing adjacent lines. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2023-11-21accel/ivpu/37xx: Fix hangs related to MMIO resetJacek Lawrynowicz1-24/+22
There is no need to call MMIO reset using VPU_37XX_BUTTRESS_VPU_IP_RESET register. IP will be reset by FLR or by entering d0i3. Also IP reset during power_up is not needed as the VPU is already in reset. Removing MMIO reset improves stability as it a partial device reset that is not safe in some corner cases. This change also brings back ivpu_boot_pwr_domain_disable() that helps to properly power down VPU when it is hung by a buggy workload. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Fixes: 828d63042aec ("accel/ivpu: Don't enter d0i3 during FLR") Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231115111004.1304092-1-jacek.lawrynowicz@linux.intel.com
2023-11-16accel/ivpu: Use threaded IRQ to handle JOB done messagesJacek Lawrynowicz8-201/+199
Remove job_done thread and replace it with generic callback based mechanism. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-6-jacek.lawrynowicz@linux.intel.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-09 01:04:40 +0300