Age | Commit message (Collapse) | Author | Files | Lines |
|
The Lenovo Yoga Book X90 is a x86 tablet which ships with Android x86
as factory OS. The Android x86 kernel fork ignores I2C devices described
in the DSDT, except for the PMIC and Audio codecs.
As usual the Lenovo Yoga Book X90's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Lenovo Yoga Book X90
to the acpi_quirk_skip_dmi_ids table to woraround this.
The DSDT also contains broken ACPI GPIO event handlers, disable those too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
|
|
The Acer Iconia One 7 B1-750 is a x86 tablet which ships with Android x86
as factory OS. The Android x86 kernel fork ignores I2C devices described
in the DSDT, except for the PMIC and Audio codecs.
As usual the Acer Iconia One 7 B1-750's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Acer Iconia One 7 B1-750
to the acpi_quirk_skip_dmi_ids table to woraround this.
The DSDT also contains broken ACPI GPIO event handlers, disable those too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
|
|
x86 ACPI boards which ship with only Android as their factory image usually
have pretty broken ACPI tables, relying on everything being hardcoded in
the factory kernel image and often disabling parts of the ACPI enumeration
kernel code to avoid the broken tables causing issues.
Part of this broken ACPI code is that sometimes these boards have _AEI
ACPI GPIO event handlers which are broken.
So far this has been dealt with in the platform/x86/x86-android-tablets.c
module, which contains various workarounds for these devices, by it calling
acpi_gpiochip_free_interrupts() on gpiochip-s with troublesome handlers to
disable the handlers.
But in some cases this is too late, if the handlers are of the edge type
then gpiolib-acpi.c's code will already have run them at boot.
This can cause issues such as GPIOs ending up as owned by "ACPI:OpRegion",
making them unavailable for drivers which actually need them.
Boards with these broken ACPI tables are already listed in
drivers/acpi/x86/utils.c for e.g. acpi_quirk_skip_i2c_client_enumeration().
Extend the quirks mechanism for a new acpi_quirk_skip_gpio_event_handlers()
helper, this re-uses the DMI-ids rather then having to duplicate the same
DMI table in gpiolib-acpi.c .
Also add the new ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS quirk to existing
boards with troublesome ACPI gpio event handlers, so that the current
acpi_gpiochip_free_interrupts() hack can be removed from
x86-android-tablets.c .
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
|
|
Merge additional ACPI quirks for x86 systems:
- Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
any more after a firmware update (Mario Limonciello).
- Add all Cezanne systems to the list for forcing StorageD3Enable,
because they all need the same quirk (Mario Limonciello).
* acpi-pm:
ACPI: x86: Drop quirk for HP Elitebook
* acpi-x86:
ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable
|
|
commit 018d6711c26e4 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.
It was reported that several more Dell systems suffered the same symptoms.
As the list is continuing to grow but these are all Cezanne systems,
instead add Cezanne to the CPU list to apply the StorageD3Enable property
and remove the whole list.
It was also reported that an HP system only has StorageD3Enable on the ACPI
device for the first NVME disk, not the second.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217003
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216773
Reported-by: David Alvarez Lombardi <dqalombardi@proton.me>
Reported-by: dbilios@stdio.gr
Reported-and-tested-by: Elvis Angelaccio <elvis.angelaccio@kde.org>
Tested-by: victor.bonnelle@proton.me
Tested-by: hurricanepootis@protonmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There was a quirk in `acpi/x86/s2idle.c` for an HP Elitebook G9
platforms to force AMD GUID codepath instead of Microsoft codepath.
This was due to a bug with WCN6855 WLAN firmware interaction with
the system.
This bug is fixed by WCN6855 firmware:
WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Remove the quirk as it's no longer necessary with this firmware.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=c7a57ef688f7d99d8338a5d8edddc8836ff0e6de
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After we introduced a module parameter and quirk infrastructure for
picking the Microsoft GUID over the SOC vendor GUID we discovered
that lots and lots of systems are getting this wrong.
The table continues to grow, and is becoming unwieldy.
We don't really have any benefit to forcing vendors to populate the
AMD GUID. This is just extra work, and more and more vendors seem
to mess it up. As the Microsoft GUID is used by Windows as well,
it's very likely that it won't be messed up like this.
So drop all the quirks forcing it and the Rembrandt behavior. This
means that Cezanne or later effectively only run the Microsoft GUID
codepath with the exception of HP Elitebook 8*5 G9.
Fixes: fd894f05cf30 ("ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt")
Cc: stable@vger.kernel.org # 6.1
Reported-by: Benjamin Cheng <ben@bcheng.me>
Reported-by: bilkow@tutanota.com
Reported-by: Paul <paul@zogpog.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2292
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216768
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
HP Elitebook 865 supports both the AMD GUID w/ _REV 2 and Microsoft
GUID with _REV 0. Both have very similar code but the AMD GUID
has a special workaround that is specific to a problem with
spurious wakeups on systems with Qualcomm WLAN.
This is believed to be a bug in the Qualcomm WLAN F/W (it doesn't
affect any other WLAN H/W). If this WLAN firmware is fixed this
quirk can be dropped.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Medion Lifetab S10346 is a x86 tablet which ships with Android x86 as
factory OS. The Android x86 kernel fork ignores I2C devices described in
the DSDT, except for the PMIC and Audio codecs.
As usual the Medion Lifetab S10346's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Medion Lifetab S10346 to
the acpi_quirk_skip_dmi_ids table to woraround this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Lenovo Yoga Tab 3 Pro (YT3-X90F) is a x86 (Cherry Trail) tablet which
ships with Android x86 as factory OS. The Android x86 kernel fork ignores
I2C devices described in the DSDT, except for the PMIC and Audio codecs.
As usual the Lenovo Yoga Tab 3 Pro's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Lenovo Yoga Tab 3 Pro to
the acpi_quirk_skip_dmi_ids table to woraround this.
ACPI_QUIRK_SKIP_I2C_CLIENTS handling uses i2c_acpi_known_good_ids[],
so that PMICs and Audio codecs will still be enumerated properly.
The Lenovo Yoga Tab 3 Pro uses a Whiskey Cove PMIC, add the INT34D3 HID
for this PMIC to the i2c_acpi_known_good_ids[] list.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
commit 018d6711c26e4 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.
Julius Brockmann reports that Inspiron 16 5625 suffers that same symptoms.
Add this other system to the list as well.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216440
Reported-and-tested-by: Julius Brockmann <mail@juliusbrockmann.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
Freezer:
- Rewrite the core freezer to behave better wrt thawing and be
simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
fixing/adjusting all the fallout.
Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() &
replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications"
* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
sched: Fix more TASK_state comparisons
sched: Fix TASK_state comparisons
sched/fair: Move call to list_last_entry() in detach_tasks
sched/fair: Cleanup loop_max and loop_break
sched/fair: Make sure to try to detach at least one movable task
sched: Show PF_flag holes
freezer,sched: Rewrite core freezer logic
sched: Widen TAKS_state literals
sched/wait: Add wait_event_state()
sched/completion: Add wait_for_completion_state()
sched: Add TASK_ANY for wait_task_inactive()
sched: Change wait_task_inactive()s match_state
freezer,umh: Clean up freezer/initrd interaction
freezer: Have {,un}lock_system_sleep() save/restore flags
sched: Rename task_running() to task_on_cpu()
sched/fair: Cleanup for SIS_PROP
sched/fair: Default to false in test_idle_cores()
sched/fair: Remove useless check in select_idle_core()
sched/fair: Avoid double search on same cpu
sched/fair: Remove redundant check in select_idle_smt()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF
support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we
only register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
* tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits)
platform/x86: use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd: pmc: Dump idle mask during "check" stage instead
platform/x86/intel/wmi: thunderbolt: Use dev_groups callback
platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks
platform/surface: Split memcpy() of struct ssam_event flexible array
platform/x86: compal-laptop: Get rid of a few forward declarations
platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf()
platform/x86: dell-smbios-base: Use sysfs_emit()
platform/x86/amd/pmf: Remove unused power_delta instances
platform/x86/amd/pmf: install notify handler after acpi init
Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF
platform/x86/amd/pmf: Add sysfs to toggle CnQF
platform/x86/amd/pmf: Add support for CnQF
platform/x86/amd: pmc: Fix build without debugfs
platform/x86: hp-wmi: Support touchpad on/off
platform/x86: int3472/discrete: Drop a forward declaration
platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static
platform/x86: wmi: Drop forward declaration of static functions
platform/x86: toshiba_acpi: Remove duplicate include
platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
...
|
|
Merge ACPI _UID handling unification changes for 6.1-rc1:
- Introduce acpi_dev_uid_to_integer() to convert a _UID string into an
integer value (Andy Shevchenko).
- Use acpi_dev_uid_to_integer() in several places to unify _UID
handling (Andy Shevchenko).
* acpi-uid:
efi/dev-path-parser: Refactor _UID handling to use acpi_dev_uid_to_integer()
spi: pxa2xx: Refactor _UID handling to use acpi_dev_uid_to_integer()
perf: qcom_l2_pmu: Refactor _UID handling to use acpi_dev_uid_to_integer()
i2c: mlxbf: Refactor _UID handling to use acpi_dev_uid_to_integer()
i2c: amd-mp2-plat: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: x86: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: LPSS: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: utils: Add acpi_dev_uid_to_integer() helper to get _UID as integer
|
|
Merge changes related to ACPI data-only tables handling and ACPI device
properties management, x86-specific ACPI code changes and ACPI SoC driver
changes for 6.1-rc1:
- Clean up the ACPI LPSS (Intel SoC) driver (Andy Shevchenko).
- Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable (Mario
Limonciello).
- Drop unused dev_fmt() and redundant 'HMAT' prefix from the HMAT
parsing code (Liu Shixin).
- Make ACPI FPDT parsing code avoid calling acpi_os_map_memory() on
invalid physical addresses (Hans de Goede).
- Silence missing-declarations warning related to Apple device
properties management (Lukas Wunner).
* acpi-properties:
ACPI: property: Silence missing-declarations warning in apple.c
* acpi-tables:
ACPI: HMAT: Drop unused dev_fmt() and redundant 'HMAT' prefix
ACPI: tables: FPDT: Don't call acpi_os_map_memory() on invalid phys address
* acpi-x86:
ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable
* acpi-soc:
ACPI: LPSS: Deduplicate skipping device in acpi_lpss_create_device()
ACPI: LPSS: Replace loop with first entry retrieval
|
|
It's reported that "ASUSTeK COMPUTER INC. ROG Flow X16 GV601RW" has
non-functional fans after resume when using the AMD codepath. This
issue is fixed using the Microsoft codepath.
Add the 3 variants of this system to the Microsoft codepath DMI table.
* GV601RW
* GV601RM
* GV601RE
Link: https://www.reddit.com/r/linuxhardware/comments/wh50nd/compatibility_report_asus_rog_flow_x16_gv601rm/
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2148#note_1571241
Reported-by: Luke Jones <luke@ljones.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Ryzen 7000 (Raphael) introduced AMDI0008 for _HID. This ID was added
in commit ed470febf837 ("ACPI: PM: s2idle: Add support for upcoming AMD
uPEP HID AMDI008"), but then removed in favor of aligning all new IDs
to Rembrandt support in commit fd894f05cf30 ("ACPI: x86: s2idle: If a
new AMD _HID is missing assume Rembrandt").
Unfortunately there was a mistake in commit 100a57379380 ("ACPI: x86:
s2idle: Move _HID handling for AMD systems into structures") that can
lead to a NULL pointer dereference accessing `dev_id->driver_data` in
the sentinel of `amd_hid_ids`. Fix this dereference.
Reported-by: Richard Gong <Richard.Gong@amd.com>
Fixes: 100a57379380 ("ACPI: x86: s2idle: Move _HID handling for AMD systems into structures")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ASUSTeK COMPUTER INC. ROG Flow X13 has a problem with fans upon wakeup from
s2idle. In examining the ASL, functions 3 and 4 are not called in the AMD
codepath but only in the Microsoft codepath.
Add the system to the quirk list to force Microsoft codepath.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2148
Tested-by: short-circuit <davidedp91@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Lenovo Slim 7 Pro 14ARH7 has a sporadically non-functional keyboard
when resuming from s2idle. This is caused by some missing calls to the
EC that don't occur in the AMD codepath but only in the Microsoft codepath.
Add the system to the quirk list to force Microsoft codepath.
Reported-by: Travis Glenn Hansen <travisghansen@yahoo.com>
Reported-by: Sebastian S. <iam@decentr.al>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216473
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216438
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ASUS ROG Zephyrus G14 is affected by the same BIOS bug as ASUS TUF
Gaming A17 where important ASL is not called in the AMD code path.
Use the Microsoft codepath instead.
Reported-and-suggested-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Matthew Anderson <ruinairas1992@gmail.com>
Tested-by: Marko Cekrlic <marko.cekrlic.26@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ASUS TUF Gaming A17 FA707RE has problems with ACPI events after
s2idle resume. It's from a missing call to an ASL method in AMD
the s2idle calling path. Force the system to use the Microsoft
Modern Standby calling path instead.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216101
Reported-and-tested-by: catalin@antebit.com
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com> # GA402RJ
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
OEMs have made some mistakes in the past for the AMD GUID support
and not populated the method properly. To add an escape hatch for
this problem introduce a module parameter that can force using
the Microsoft GUID.
This is intentionally introduced to both Intel and AMD codepaths
to allow using the parameter as a debugging tactic on either.
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com> # GA402RJ
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
A mistake was made that only AMDI0007 was set to rev of "2", but
it should have been also set for AMDI008. If an ID is missing from
the _HID table, then assume it matches Rembrandt behavior.
This implicitly means that if any other behavior changes happen
in the future missing IDs must be added to that table.
Tested-by: catalin@antebit.com
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com> # GA402RJ
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Right now the information about which cases to use for what are in a
comment, but this is error prone. Instead move all information into
a dedicated structure.
Tested-by: catalin@antebit.com
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com> # GA402RJ
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Dell Inspiron 14 2-in-1 has two ACPI nodes under GPP1 both with _ADR of
0, both without _HID. It's ambiguous which the kernel should take, but
it seems to take "DEV0". Unfortunately "DEV0" is missing the device
property `StorageD3Enable` which is present on "NVME".
To avoid this causing problems for suspend, add a quirk for this system
to behave like `StorageD3Enable` property was found.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216440
Reported-and-tested-by: Luya Tshimbalanga <luya@fedoraproject.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPI utils provide acpi_dev_uid_to_integer() helper to extract _UID as
an integer. Use it instead of custom approach.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On some platforms it is found that Linux more aggressively enters s2idle
than Windows enters Modern Standby and this uncovers some synchronization
issues for the platform. To aid in debugging this class of problems in
the future, add support for an extra optional callback intended for
drivers to emit extra debugging.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220829162953.5947-2-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Rafael explained that the reason for having both PF_NOFREEZE and
PF_FREEZER_SKIP is that {,un}lock_system_sleep() is callable from
kthread context that has previously called set_freezable().
In preparation of merging the flags, have {,un}lock_system_slee() save
and restore current->flags.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114648.725003428@infradead.org
|
|
Silence an annoying message emitted for W=1 builds:
drivers/acpi/x86/apple.c:30:6: warning: no previous declaration for 'acpi_extract_apple_properties' [-Wmissing-declarations]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Because suspend-to-idle is always supported and on x86 it is the only
way to suspend the system if S3 is not supported by the platform, the
kernel attempts to enter low-power S0 idle in the suspend-to-idle flow
regardless of whether or not the ACPI_FADT_LOW_POWER_S0 flag is set in
the FADT. However, if that flag is not set, residency counters
associated with low-power S0 idle may not count and the platform may
refuse to put the EC into a low-power mode, for example.
For this reason, print diagnostic messages when the platform should
achieve significant energy savings in low-power S0 idle (because the
ACPI_FADT_LOW_POWER_S0 flag is set in the FADT) and when
suspend-to-idle becomes the default suspend method (because low-power
S0 idle should be equally or more efficient than S3, if available).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
If the PNP0D80 device is present and its _DSM appears to be valid,
there is no reason to avoid using it even if ACPI_FADT_LOW_POWER_S0
is unset in the FADT, because suspend-to-idle may be the only way to
suspend the system if S3 is not supported by the platform, so do not
return early from lps0_device_attach() in that case.
However, still check ACPI_FADT_LOW_POWER_S0 when deciding whether or
not suspend-to-idle should be the default system suspend method.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
New version of uPEP will have a separate ACPI id, add that
to the support list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"New drivers:
- AMD Host System Management Port (HSMP)
- Intel Software Defined Silicon
Removed drivers (functionality folded into other drivers):
- intel_cht_int33fe_microb
- surface3_button
amd-pmc:
- s2idle bug-fixes
- Support for AMD Spill to DRAM STB feature
hp-wmi:
- Fix SW_TABLET_MODE detection method (and other fixes)
- Support omen thermal profile policy v1
serial-multi-instantiate:
- Add SPI device support
- Add support for CS35L41 amplifiers used in new laptops
think-lmi:
- syfs-class-firmware-attributes Certificate authentication support
thinkpad_acpi:
- Fixes + quirks
- Add platform_profile support on AMD based ThinkPads
x86-android-tablets:
- Improve Asus ME176C / TF103C support
- Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets
Lots of various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (60 commits)
platform/x86: think-lmi: Certificate authentication support
Documentation: syfs-class-firmware-attributes: Lenovo Certificate support
platform/x86: amd-pmc: Only report STB errors when STB enabled
platform/x86: amd-pmc: Drop CPU QoS workaround
platform/x86: amd-pmc: Output error codes in messages
platform/x86: amd-pmc: Move to later in the suspend process
ACPI / x86: Add support for LPS0 callback handler
platform/x86: thinkpad_acpi: consistently check fan_get_status return.
platform/x86: hp-wmi: support omen thermal profile policy v1
platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated
platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls
platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method
platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)
platform/x86: amd-pmc: Validate entry into the deepest state on resume
platform/x86: thinkpad_acpi: Don't use test_bit on an integer
platform/x86: thinkpad_acpi: Fix compiler warning about uninitialized err variable
platform/x86: thinkpad_acpi: clean up dytc profile convert
platform/x86: x86-android-tablets: Depend on EFI and SPI
platform/x86: amd-pmc: uninitialized variable in amd_pmc_s2d_init()
platform/x86: intel-uncore-freq: fix uncore_freq_common_init() error codes
...
|
|
Currenty the latest thing run during a suspend to idle attempt is
the LPS0 `prepare_late` callback and the earliest thing is the
`resume_early` callback.
There is a desire for the `amd-pmc` driver to suspend later in the
suspend process (ideally the very last thing), so create a callback
that it or any other driver can hook into to do this.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220317141445.6498-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Yoga Tablet 1050F/L is a x86 ACPI tablet which ships with Android x86
as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts (the Android x86
kernel fork ignores I2C devices described in the DSDT).
Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the
acpi_quirk_skip_dmi_ids table to woraround this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Nextbook Ares 8 is a x86 ACPI tablet which ships with Android x86
as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts (the Android x86
kernel fork ignores I2C devices described in the DSDT).
Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the
acpi_quirk_skip_dmi_ids table to woraround this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Testing on various upcoming OEM systems shows commit 7b167c4cb48e ("ACPI:
PM: Only mark EC GPE for wakeup on Intel systems") was short
sighted and the symptoms were indicative of other problems. Some OEMs
do have the dedicated GPIOs for the power button but also rely upon
an interrupt to the EC SCI to let the lid work.
The original commit showed spurious activity on Lenovo systems:
* On both Lenovo T14 and P14s the keyboard wakeup doesn't work, and
sometimes the power button event doesn't work.
This was confirmed on my end at that time.
However further development in the kernel showed that the issue was
actually the IRQ for the GPIO controller was also shared with the EC SCI.
This was actually fixed by commit 2d54067fcd23 ("pinctrl: amd: Fix
wakeups when IRQ is shared with SCI").
The original commit also showed problems with AC adapter:
* On HP 635 G7 detaching or attaching AC during suspend will cause
the system not to wakeup
* On Asus vivobook to prevent detaching AC causing resume problems
* On Lenovo 14ARE05 to prevent detaching AC causing resume problems
* On HP ENVY x360 to prevent detaching AC causing resume problems
Detaching AC adapter causing problems appears to have been a problem
because the EC SCI went off to notify the OS of the power adapter change
but the SCI was ignored and there was no other way to wake up this system
since GPIO controller wasn't properly enabled. The wakeups were fixed by
enabling the GPIO controller in commit acd47b9f28e5 ("pinctrl: amd: Handle
wake-up interrupt").
I've confirmed on a variety of OEM notebooks with the following test
1) echo 1 | sudo tee /sys/power/pm_debug_messages
2) sudo systemctl suspend
3) unplug AC adapter, make sure system is still asleep
4) wake system from lid (which is provided by ACPI SCI on some of them)
5) dmesg
a) see the EC GPE dispatched, timekeeping for X seconds (matching ~time
until AC adapter plug out)
b) see timekeeping for Y seconds until woke (matching ~time from AC
adapter until lid event)
6) Look at /sys/kernel/debug/amd_pmc/s0ix_stats
"Time (in us) in S0i3" = X + Y - firmware processing time
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
So far all of the tablets for which the skip i2c-client/serdev enumeration
quirks have been added also all have broken ACPI AC / battery devices
extend the existing quirks for these tablets to also skip the broken
AC / battery devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some x86 ACPI boards have broken AC and battery ACPI devices in their ACPI
tables. This is often tied to these devices using certain PMICs where the
factory OS image seems to be using native charger and fuel-gauge drivers
instead.
So far both the AC and battery drivers have almost identical checks for
these PMICs including both of them having a DMI based mechanism to force
usage of the ACPI AC and battery drivers on some boards even though one
of these PMICs is present, with the same 2 boards listed in both driver's
DMI tables for this.
The only difference is that the AC driver checks for 2 PMICs and the
battery driver only for one. This has grown this way because the other
(Whiskey Cove) PMIC is only used on a few boards (3 known boards) and
although some of these do have non working ACPI battery devices, their
_STA method always returns 0, but that really should not be relied on.
This patch factors out the shared checks into a new
acpi_quirk_skip_acpi_ac_and_battery() helper and moves the AC and
battery drivers over to this new helper.
Note the DMI table is shared with acpi_quirk_skip_i2c_client_enumeration()
and acpi_quirk_skip_serdev_enumeration(), because boards needing DMI quirks
for either of these typically also have broken AC and battery ACPI devices.
The ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY quirk is not set yet on boards
already in this DMI table, to avoid introducing any functional changes
in this refactoring patch.
Besided sharing the code between the AC and battery drivers this
refactoring also moves this quirk handling to under #ifdef CONFIG_X86,
removing this x86 specific code from non x86 ACPI builds.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge recent device enumeration changes to satisfy dependencies.
|
|
x86 ACPI boards which ship with only Android as their factory image usually
declare a whole bunch of bogus I2C devs in their ACPI tables and sometimes
there are issues with serdev devices on these boards too, e.g. the resource
points to the wrong serdev_controller.
Instantiating I2C / serdev devs for these bogus devs causes various issues,
e.g. GPIO/IRQ resource conflicts because sometimes drivers do bind to them.
The Android x86 kernel fork shipped on these devices has some special code
to remove the bogus I2C clients (and serdevs are ignored completely).
Introduce acpi_quirk_skip_i2c_client_enumeration() and
acpi_quirk_skip_serdev_enumeration() helpers. Which can be used by the I2C/
serdev code to skip instantiating any I2C or serdev devs on broken boards.
These 2 helpers are added to drivers/acpi/x86/utils.c so that the DMI table
can be shared between the I2C and serdev code.
Note these boards typically do actually have I2C and serdev devices, just
different ones then the ones described in their DSDT. The devices which
are actually present are manually instantiated by the
drivers/platform/x86/x86-android-tablets.c kernel module.
The new helpers are only build if CONFIG_X86_ANDROID_TABLETS is enabled,
otherwise they are empty stubs to not unnecessarily grow the kernel size.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Modify the ACPI code to use acpi_fetch_acpi_dev() instead of
acpi_bus_get_device() where applicable.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Xiaomi Mi Pad 2 has backlit LEDs behind the capacitive menu, home
and back buttons below the screen which are controlled by the PWM2
controller of the CHT SoC. This PWM2 controller gets hidden by the
firmware, add it to the always_present_ids table so that we can use
the PWM controller to control the backlighting of the buttons.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The GPD win and its sibling the GPD pocket (99% the same electronics in a
different case) use a PCI wifi card. But the ACPI tables on both variants
contain a bug where the SDIO MMC controller for SDIO wifi cards is enabled
despite this. This SDIO MMC controller has a PCI0.SDHB.BRC1 child-device
which _PS3 method sets a GPIO causing the PCI wifi card to turn off.
At the moment there is a pretty ugly kludge in the sdhci-acpi.c code,
just to work around the bug in the DSDT of this single design. This can
be solved cleaner/simply with a quirk overriding the _STA return of the
broken PCI0.SDHB.BRC1 PCI0.SDHB.BRC1 child with a status value of 0,
so that its power_manageable flag gets cleared, avoiding this problem.
Note that even though it is not used, the _STA method for the MMC
controller is deliberately not overridden. If the status of the MMC
controller were forced to 0 it would never get suspended, which would
cause these mini-laptops to not reach S0i3 level when suspended.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Not all ACPI-devices have a HID + UID, allow specifying quirks for
acpi_device_override_status() by path too.
Note this moves the path/HID+UID check to after the CPU + DMI checks
since the path lookup is somewhat costly.
This way this lookup is only done on devices where the other checks
match.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, acpi_bus_get_status() calls acpi_device_always_present() to
allow platform quirks to override the _STA return to report that a
device is present (status = ACPI_STA_DEFAULT) independent of the _STA
return.
In some cases it might also be useful to have the opposite functionality
and have a platform quirk which marks a device as not present (status = 0)
to work around ACPI table bugs.
Change acpi_device_always_present() into a more generic
acpi_device_override_status() function to allow this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It turns out that there is a WMI object which controls the PWM2 device
used for the keyboard backlight and that WMI object also provides some
other useful functionality.
The upcoming lenovo-yogabook-wmi driver will offer both backlight
control and the other functionality, so there no longer is a need
to have the lpss-pwm driver binding to PWM2 for backlight control;
and this is now actually undesirable because this will cause both
the WMI code and the lpss-pwm driver to poke at the same PWM
controller.
Drop the always-present quirk for the PWM2 ACPI-device, so that the
lpss-pwm controller will no longer bind to it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Surface Laptop 4 AMD has used the AMD0005 to identify this
controller instead of using the appropriate ACPI ID AMDI0005. The
AMD0005 needs the same special casing as AMDI0005.
Link: https://github.com/linux-surface/acpidumps/tree/master/surface_laptop_4_amd
Link: https://gist.github.com/nakato/2a1a7df1a45fe680d7a08c583e1bf863
Signed-off-by: Sachi King <nakato@nakato.io>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: 5.14+ <stable@vger.kernel.org> # 5.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It was reported that on "HP ENVY x360" that power LED does not come
back, certain keys like brightness controls do not work, and the fan
never spins up, even under load on 5.14 final.
In analysis of the SSDT it's clear that the Microsoft UUID doesn't
provide functional support, but rather the AMD UUID should be
supporting this system.
Because this is a gap in the expected logic, we checked back with
internal team. The conclusion was that on Windows AMD uPEP *does*
run even when Microsoft UUID present, but most OEM systems have
adopted value of "0x3" for supported functions and hence nothing
runs.
Henceforth add support for running both Microsoft and AMD methods.
This approach will also allow the same logic on Intel systems if
desired at a future time as well by pulling the evaluation of
`lps0_dsm_func_mask_microsoft` out of the `if` block for
`acpi_s2idle_vendor_amd`.
Link: https://gitlab.freedesktop.org/drm/amd/uploads/9fbcd7ec3a385cc6949c9bacf45dc41b/acpi-f.20.bin
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1691
Reported-by: Maxwell Beck <max@ryt.one>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[ rjw: Edits of the new comments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It was reported by a user with a Dell m15 R5 (5800H) that
the keyboard backlight was turning on when entering suspend
and turning off when exiting (the opposite of how it should be).
The user bisected it back to commit 5dbf50997578 ("ACPI: PM:
s2idle: Add support for new Microsoft UUID"). Previous to that
commit the LEDs didn't turn off at all. Confirming in the spec,
these were reversed when introduced.
Fix them to match the spec.
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1230#note_1021836
Fixes: 5dbf50997578 ("ACPI: PM: s2idle: Add support for new Microsoft UUID")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|