Age | Commit message (Collapse) | Author | Files | Lines |
|
We want the fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It doesn't make any difference to runtime but I've switched these two
checks to make my static checker happy.
The problem is that "buffer->data_size" is user controlled and if it's
less than "sizeo(*hdr)" then that means "offset" can be more than
"buffer->data_size". It's just cleaner to check it in the other order.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This can't happen with normal nodes (because you can't get a ref
to a node you own), but it could happen with the context manager;
to make the behavior consistent with regular nodes, reject
transactions into the context manager by the process owning it.
Reported-by: syzbot+09e05aba06723a94d43d@syzkaller.appspotmail.com
Signed-off-by: Martijn Coenen <maco@android.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To prevent races with ep_remove_waitqueue() removing the
waitqueue at the same time.
Reported-by: syzbot+a2a3c4909716e271487e@syzkaller.appspotmail.com
Signed-off-by: Martijn Coenen <maco@android.com>
Cc: stable <stable@vger.kernel.org> # 4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The format specifier "%p" can leak kernel addresses. Use
"%pK" instead. There were 4 remaining cases in binder.c.
Signed-off-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
binder_send_failed_reply() is called when a synchronous
transaction fails. It reports an error to the thread that
is waiting for the completion. Given that the transaction
is synchronous, there should never be more than 1 error
response to that thread -- this was being asserted with
a WARN().
However, when exercising the driver with syzbot tests, cases
were observed where multiple "synchronous" requests were
sent without waiting for responses, so it is possible that
multiple errors would be reported to the thread. This testing
was conducted with panic_on_warn set which forced the crash.
This is easily reproduced by sending back-to-back
"synchronous" transactions without checking for any
response (eg, set read_size to 0):
bwr.write_buffer = (uintptr_t)&bc1;
bwr.write_size = sizeof(bc1);
bwr.read_buffer = (uintptr_t)&br;
bwr.read_size = 0;
ioctl(fd, BINDER_WRITE_READ, &bwr);
sleep(1);
bwr2.write_buffer = (uintptr_t)&bc2;
bwr2.write_size = sizeof(bc2);
bwr2.read_buffer = (uintptr_t)&br;
bwr2.read_size = 0;
ioctl(fd, BINDER_WRITE_READ, &bwr2);
sleep(1);
The first transaction is sent to the servicemanager and the reply
fails because no VMA is set up by this client. After
binder_send_failed_reply() is called, the BINDER_WORK_RETURN_ERROR
is sitting on the thread's todo list since the read_size was 0 and
the client is not waiting for a response.
The 2nd transaction is sent and the BINDER_WORK_RETURN_ERROR has not
been consumed, so the thread's reply_error.cmd is still set (normally
cleared when the BINDER_WORK_RETURN_ERROR is handled). Therefore
when the servicemanager attempts to reply to the 2nd failed
transaction, the error is already set and it triggers this warning.
This is a user error since it is not waiting for the synchronous
transaction to complete. If it ever does check, it will see an
error.
Changed the WARN() to a pr_warn().
Signed-off-by: Todd Kjos <tkjos@android.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the kzalloc() in binder_get_thread() fails, binder_poll()
dereferences the resulting NULL pointer.
Fix it by returning POLLERR if the memory allocation failed.
This bug was found by syzkaller using fault injection.
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 457b9a6f09f0 ("Staging: android: add binder driver")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big pull request for char/misc drivers for 4.16-rc1.
There's a lot of stuff in here. Three new driver subsystems were added
for various types of hardware busses:
- siox
- slimbus
- soundwire
as well as a new vboxguest subsystem for the VirtualBox hypervisor
drivers.
There's also big updates from the FPGA subsystem, lots of Android
binder fixes, the usual handful of hyper-v updates, and lots of other
smaller driver updates.
All of these have been in linux-next for a long time, with no reported
issues"
* tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits)
char: lp: use true or false for boolean values
android: binder: use VM_ALLOC to get vm area
android: binder: Use true and false for boolean values
lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN
EISA: Delete error message for a failed memory allocation in eisa_probe()
EISA: Whitespace cleanup
misc: remove AVR32 dependencies
virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES
soundwire: Fix a signedness bug
uio_hv_generic: fix new type mismatch warnings
uio_hv_generic: fix type mismatch warnings
auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
uio_hv_generic: add rescind support
uio_hv_generic: check that host supports monitor page
uio_hv_generic: create send and receive buffers
uio: document uio_hv_generic regions
doc: fix documentation about uio_hv_generic
vmbus: add monitor_id and subchannel_id to sysfs per channel
vmbus: fix ABI documentation
uio_hv_generic: use ISR callback method
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
|
|
VM_IOREMAP is used to access hardware through a mechanism called
I/O mapped memory. Android binder is a IPC machanism which will
not access I/O memory.
And VM_IOREMAP has alignment requiement which may not needed in
binder.
__get_vm_area_node()
{
...
if (flags & VM_IOREMAP)
align = 1ul << clamp_t(int, fls_long(size),
PAGE_SHIFT, IOREMAP_MAX_ORDER);
...
}
This patch will save some kernel vm area, especially for 32bit os.
In 32bit OS, kernel vm area is only 240MB. We may got below
error when launching a app:
<3>[ 4482.440053] binder_alloc: binder_alloc_mmap_handler: 15728 8ce67000-8cf65000 get_vm_area failed -12
<3>[ 4483.218817] binder_alloc: binder_alloc_mmap_handler: 15745 8ce67000-8cf65000 get_vm_area failed -12
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Martijn Coenen <maco@android.com>
Acked-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
----
V3: update comments
V2: update comments
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
checkpatch warns against the use of symbolic permissions,
this patch migrates all symbolic permissions in the binder
driver to octal permissions.
Test: debugfs nodes created by binder have the same unix
permissions prior to and after this patch was applied.
Signed-off-by: Harsh Shandilya <harsh@prjkt.io>
Cc: "Arve Hjønnevåg" <arve@android.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It was no longer being used.
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
binder_poll() passes the thread->wait waitqueue that
can be slept on for work. When a thread that uses
epoll explicitly exits using BINDER_THREAD_EXIT,
the waitqueue is freed, but it is never removed
from the corresponding epoll data structure. When
the process subsequently exits, the epoll cleanup
code tries to access the waitlist, which results in
a use-after-free.
Prevent this by using POLLFREE when the thread exits.
Signed-off-by: Martijn Coenen <maco@android.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: stable <stable@vger.kernel.org> # 4.14
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Coding style fixup
Signed-off-by: Elad Wexler <elad.wexler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
arguments
The function binder_alloc_new_buf_locked() is only used in this file, so
make it static. Also clean up sparse warning:
drivers/android/binder_alloc.c:330:23: warning: no previous prototype
for ‘binder_alloc_new_buf_locked’ [-Wmissing-prototypes]
In addition, the line of the function name exceeds 80 characters when
add static for this function, hence indent its arguments anew.
Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Both list_lru_init() and register_shrinker() might return an error.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Sherry Yang <sherryy@android.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
proc->files cleanup is initiated by binder_vma_close. Therefore
a reference on the binder_proc is not enough to prevent the
files_struct from being released while the binder_proc still has
a reference. This can lead to an attempt to dereference the
stale pointer obtained from proc->files prior to proc->files
cleanup. This has been seen once in task_get_unused_fd_flags()
when __alloc_fd() is called with a stale "files".
The fix is to protect proc->files with a mutex to prevent cleanup
while in use.
Signed-off-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org> # 4.14
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the fixes and changes in here for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If a call to put_user() fails, we failed to
properly free a transaction and send a failed
reply (if necessary).
Signed-off-by: Martijn Coenen <maco@android.com>
Cc: stable <stable@vger.kernel.org> # 4.14
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This flag determines whether the thread should currently
process the work in the thread->todo worklist.
The prime usecase for this is improving the performance
of synchronous transactions: all synchronous transactions
post a BR_TRANSACTION_COMPLETE to the calling thread,
but there's no reason to return that command to userspace
right away - userspace anyway needs to wait for the reply.
Likewise, a synchronous transaction that contains a binder
object can cause a BC_ACQUIRE/BC_INCREFS to be returned to
userspace; since the caller must anyway hold a strong/weak
ref for the duration of the call, postponing these commands
until the reply comes in is not a problem.
Note that this flag is not used to determine whether a
thread can handle process work; a thread should never pick
up process work when thread work is still pending.
Before patch:
------------------------------------------------------------------
Benchmark Time CPU Iterations
------------------------------------------------------------------
BM_sendVec_binderize/4 45959 ns 20288 ns 34351
BM_sendVec_binderize/8 45603 ns 20080 ns 34909
BM_sendVec_binderize/16 45528 ns 20113 ns 34863
BM_sendVec_binderize/32 45551 ns 20122 ns 34881
BM_sendVec_binderize/64 45701 ns 20183 ns 34864
BM_sendVec_binderize/128 45824 ns 20250 ns 34576
BM_sendVec_binderize/256 45695 ns 20171 ns 34759
BM_sendVec_binderize/512 45743 ns 20211 ns 34489
BM_sendVec_binderize/1024 46169 ns 20430 ns 34081
After patch:
------------------------------------------------------------------
Benchmark Time CPU Iterations
------------------------------------------------------------------
BM_sendVec_binderize/4 42939 ns 17262 ns 40653
BM_sendVec_binderize/8 42823 ns 17243 ns 40671
BM_sendVec_binderize/16 42898 ns 17243 ns 40594
BM_sendVec_binderize/32 42838 ns 17267 ns 40527
BM_sendVec_binderize/64 42854 ns 17249 ns 40379
BM_sendVec_binderize/128 42881 ns 17288 ns 40427
BM_sendVec_binderize/256 42917 ns 17297 ns 40429
BM_sendVec_binderize/512 43184 ns 17395 ns 40411
BM_sendVec_binderize/1024 43119 ns 17357 ns 40432
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Show the high watermark of the index into the alloc->pages
array, to facilitate sizing the buffer on a per-process
basis.
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem patches
for 4.15-rc1.
There are small changes all over here, hyperv driver updates, pcmcia
driver updates, w1 driver updats, vme driver updates, nvmem driver
updates, and lots of other little one-off driver updates as well. The
shortlog has the full details.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
VME: Return -EBUSY when DMA list in use
w1: keep balance of mutex locks and refcnts
MAINTAINERS: Update VME subsystem tree.
nvmem: sunxi-sid: add support for A64/H5's SID controller
nvmem: imx-ocotp: Update module description
nvmem: imx-ocotp: Enable i.MX7D OTP write support
nvmem: imx-ocotp: Add i.MX7D timing write clock setup support
nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function
nvmem: imx-ocotp: Add support for banked OTP addressing
nvmem: imx-ocotp: Pass parameters via a struct
nvmem: imx-ocotp: Restrict OTP write to IMX6 processors
nvmem: uniphier: add UniPhier eFuse driver
dt-bindings: nvmem: add description for UniPhier eFuse
nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset
nvmem: qfprom: fix different address space warnings of sparse
nvmem: mtk-efuse: fix different address space warnings of sparse
nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it
nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it
thunderbolt: tb: fix use after free in tb_activate_pcie_devices
MAINTAINERS: Add git tree for Thunderbolt development
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 4.15 merge window:
- treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- minor code cleanups"
* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Do not paper over type mismatches in module_param_call()
treewide: Fix function prototypes for module_param_call()
module: Prepare to convert all module_param_call() prototypes
kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:
@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@
module_param_call(_name, _set_func, _get_func, _arg, _mode);
@fix_set_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _set_func(
-_val_type _val
+const char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
@fix_get_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _get_func(
-_val_type _val
+char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:
drivers/platform/x86/thinkpad_acpi.c
fs/lockd/svc.c
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
We want the driver fixes in here and this resolves a merge issue with
the binder driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Don't access next->data in kernel debug message when the
next buffer is null.
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Sherry Yang <sherryy@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use binder_alloc struct's mm_struct rather than getting
a reference to the mm struct through get_task_mm to
avoid a potential deadlock between lru lock, task lock and
dentry lock, since a thread can be holding the task lock
and the dentry lock while trying to acquire the lru lock.
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Sherry Yang <sherryy@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
binder_shrinker struct is not used anywhere outside of
binder_alloc.c and should be static.
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Sherry Yang <sherryy@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The vma argument in update_page_range is no longer
used after 74310e06 ("android: binder: Move buffer
out of area shared with user space"), since mmap_handler
no longer calls update_page_range with a vma.
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Sherry Yang <sherryy@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Because we're not guaranteed that subsequent calls
to poll() will have a poll_table_struct parameter
with _qproc set. When _qproc is not set, poll_wait()
is a noop, and we won't be woken up correctly.
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are 4 patches to resolve some char/misc driver issues found these
past weeks.
One of them is a mei bugfix and another is a new mei device id. There
is also a hyper-v fix for a reported issue, and a binder issue fix for
a problem reported by a few people.
All of these have been in my tree for a while, I don't know if
linux-next is really testing much this month. But 0-day is happy with
them :)"
* tag 'char-misc-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: fix use-after-free in binder_transaction()
Drivers: hv: vmbus: Fix bugs in rescind handling
mei: me: add gemini lake devices id
mei: always use domain runtime pm callbacks.
|
|
User-space normally keeps the node alive when creating a transaction
since it has a reference to the target. The local strong ref keeps it
alive if the sending process dies before the target process processes
the transaction. If the source process is malicious or has a reference
counting bug, this can fail.
In this case, when we attempt to decrement the node in the failure
path, the node has already been freed.
This is fixed by taking a tmpref on the node while constructing
the transaction. To avoid re-acquiring the node lock and inner
proc lock to increment the proc's tmpref, a helper is used that
does the ref increments on both the node and proc.
Signed-off-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the global lru lock in isolate callback before calling
zap_page_range which calls cond_resched, and re-acquire the global lru
lock before returning. Also change return code to LRU_REMOVED_RETRY.
Use mmput_async when fail to acquire mmap sem in an atomic context.
Fix "BUG: sleeping function called from invalid context"
errors when CONFIG_DEBUG_ATOMIC_SLEEP is enabled.
Also restore mmput_async, which was initially introduced in commit
ec8d7c14ea14 ("mm, oom_reaper: do not mmput synchronously from the oom
reaper context"), and was removed in commit 212925802454 ("mm: oom: let
oom_reap_task and exit_mmap run concurrently").
Link: http://lkml.kernel.org/r/20170914182231.90908-1-sherryy@android.com
Fixes: f2517eb76f1f2 ("android: binder: Add global lru shrinker to binder")
Signed-off-by: Sherry Yang <sherryy@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Kyle Yan <kyan@codeaurora.org>
Acked-by: Arve Hjønnevåg <arve@android.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Martijn Coenen <maco@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Riley Andrews <riandrews@android.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hoeun Ryu <hoeun.ryu@gmail.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
commit 7a4408c6bd3e ("binder: make sure accesses to proc/thread are
safe") made a change to enqueue tcomplete to thread->todo before
enqueuing the transaction. However, in err_dead_proc_or_thread case,
the tcomplete is directly freed, without dequeued. It may cause the
thread->todo list to be corrupted.
So, dequeue it before freeing.
Fixes: 7a4408c6bd3e ("binder: make sure accesses to proc/thread are safe")
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 372e3147df70 ("binder: guarantee txn complete / errors delivered
in-order") incorrectly defined a local ret value. This ret value will
be invalid when out of the if block
Fixes: 372e3147df70 ("binder: refactor binder ref inc/dec for thread safety")
Signed-off-by: Xu YiPing <xuyiping@hislicon.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allowing binder to expose the 64-bit API on 32-bit kernels caused a
build warning:
drivers/android/binder.c: In function 'binder_transaction_buffer_release':
drivers/android/binder.c:2220:15: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
fd_array = (u32 *)(parent_buffer + fda->parent_offset);
^
drivers/android/binder.c: In function 'binder_translate_fd_array':
drivers/android/binder.c:2445:13: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
fd_array = (u32 *)(parent_buffer + fda->parent_offset);
^
drivers/android/binder.c: In function 'binder_fixup_parent':
drivers/android/binder.c:2511:18: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
This adds extra type casts to avoid the warning.
However, there is another problem with the Kconfig option: turning
it on or off creates two incompatible ABI versions, a kernel that
has this enabled cannot run user space that was built without it
or vice versa. A better solution might be to leave the option hidden
until the binder code is fixed to deal with both ABI versions.
Fixes: e8d2ed7db7c3 ("Revert "staging: Fix build issues with new binder API"")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This can cause issues with processes using the poll()
interface:
1) client sends two oneway transactions
2) the second one gets queued on async_todo
(because the server didn't handle the first one
yet)
3) server returns from poll(), picks up the
first transaction and does transaction work
4) server is done with the transaction, sends
BC_FREE_BUFFER, and the second transaction gets
moved to thread->todo
5) libbinder's handlePolledCommands() only handles
the commands in the current data buffer, so
doesn't see the new transaction
6) the server continues running and issues a new
outgoing transaction. Now, it suddenly finds
the incoming oneway transaction on its thread
todo, and returns that to userspace.
7) userspace does not expect this to happen; it
may be holding a lock while making the outgoing
transaction, and if handling the incoming
trasnaction requires taking the same lock,
userspace will deadlock.
By queueing the async transaction to the proc
workqueue, we make sure it's only picked up when
a thread is ready for proc work.
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This allows userspace to request death notifications without
having to worry about getting an immediate callback on the same
thread; one scenario where this would be problematic is if the
death recipient handler grabs a lock that was already taken
earlier (eg as part of a nested transaction).
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Because is_spin_locked() always returns false on UP
systems.
Use assert_spin_locked() instead, and remove the
WARN_ON() instances, since those were easy to verify.
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The BINDER_GET_NODE_DEBUG_INFO ioctl will return debug info on
a node. Each successive call reusing the previous return value
will return the next node. The data will be used by
libmemunreachable to mark the pointers with kernel references
as reachable.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of pushing new transactions to the process
waitqueue, select a thread that is waiting on proc
work to handle the transaction. This will make it
easier to improve priority inheritance in future
patches, by setting the priority before we wake up
a thread.
If we can't find a waiting thread, submit the work
to the proc waitqueue instead as we did previously.
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removes the process waitqueue, so that threads
can only wait on the thread waitqueue. Whenever
there is process work to do, pick a thread and
wake it up. Having the caller pick a thread is
helpful for things like priority inheritance.
This also fixes an issue with using epoll(),
since we no longer have to block on different
waitqueues.
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the number of active, lru, and free pages for
each binder process in binder stats
Signed-off-by: Sherry Yang <sherryy@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix crash introduced by 74310e06be4d74dcf67cd108366710dee5c576d5
(android: binder: Move buffer out of area shared with user space)
when close is called after open without mmap in between.
Reported-by: kernel test robot <fengguang.wu@intel.com>
Fixes: 74310e06be4d ("android: binder: Move buffer out of area shared with user space")
Signed-off-by: Sherry Yang <sherryy@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|