| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When regmap consists of single register, 'regmap' subsystem is unable to
understand whether ->max_register is set or not, because in both cases it
is equal to zero. It leads to that the logic based on value of
->max_register doesn't work. For example using of REGCACHE_FLAT fails.
This patch introduces an extra parameter to regmap config, indicating
that zero value in ->max_register is authentic.
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Link: https://lore.kernel.org/r/20240126200836.1829995-1-jan.dakinevich@salutedevices.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since commit 0ec7731655de ("regmap: Ensure range selector registers
are updated after cache sync") opening pcm512x based soundcards fail
with EINVAL and dmesg shows sync cache and pm_runtime_get errors:
[ 228.794676] pcm512x 1-004c: Failed to sync cache: -22
[ 228.794740] pcm512x 1-004c: ASoC: error at snd_soc_pcm_component_pm_runtime_get on pcm512x.1-004c: -22
This is caused by the cache check result leaking out into the
regcache_sync return value.
Fix this by making the check local-only, as the comment above the
regcache_read call states a non-zero return value means there's
nothing to do so the return value should not be altered.
Fixes: 0ec7731655de ("regmap: Ensure range selector registers are updated after cache sync")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20231203222216.96547-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When we sync the register cache we do so with the cache bypassed in order
to avoid overhead from writing the synced values back into the cache. If
the regmap has ranges and the selector register for those ranges is in a
register which is cached this has the unfortunate side effect of meaning
that the physical and cached copies of the selector register can be out of
sync after a cache sync. The cache will have whatever the selector was when
the sync started and the hardware will have the selector for the register
that was synced last.
Fix this by rewriting all cached selector registers after every sync,
ensuring that the hardware and cache have the same content. This will
result in extra writes that wouldn't otherwise be needed but is simple
so hopefully robust. We don't read from the hardware since not all
devices have physical read support.
Given that nobody noticed this until now it is likely that we are rarely if
ever hitting this case.
Reported-by: Hector Martin <marcan@marcan.st>
Cc: stable@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231026-regmap-fix-selector-sync-v1-1-633ded82770d@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There's several things here that will really help my CI.
|
|
Currently the regcache core unconditionally enables async I/O for all cache
types, causing problems for the maple tree cache which dynamically allocates
the buffers used to write registers to the device since async requires the
buffers to be kept around until the I/O has been completed.
This use of async I/O is mainly for the rbtree cache which stores data in
a format directly usable for regmap_raw_write(), though there is a special
case for single register writes which would also have allowed it to be used
with the flat cache. It is a bit of a landmine for other caches since it
implicitly converts sync operations to async, and with modern hardware it
is not clear that async I/O is actually a performance win as shown by the
performance work David Jander did with SPI. In multi core systems the cost
of managing concurrency ends up swamping the performance benefit and almost
all modern systems are multi core.
Address this by pushing the enablement of async I/O down into the rbtree
cache where it is actively used, avoiding surprises for other cache
implementations.
Reported-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Fixes: bfa0b38c1483 ("regmap: maple: Implement block sync for the maple tree cache")
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230719-regcache-async-rbtree-v1-1-b03d30cf1daf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The HDA driver has a use case for checking if a register is cached which
it bodges in awkwardly and unclearly. Provide an API which allows it to
directly do what it's trying to do.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230717-regmap-cache-check-v1-1-73ef688afae3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no support for 64-bit data size in regmap, so
there is no point to have it in regmap cache.
This reverts commit 8b7663de6e2bfe3c40e1846e1c4625f33d138757.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230622183613.58762-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Another busy release for regmap with the second half of the maple tree
register cache implementation, there's some smaller optimisations that
could be done but this should now be able to replace the rbtree cache
for most devices.
We also had a followup from Aidan MacDonald's refactoring of some of
the regmap-irq interfaces, the conversion is complete so the old
interfaces are removed. This means that even with the new features for
the maple tree cache we'd have a nice negative diffstat were it not
for the addition of a bunch more KUnit coverage.
There's one GPIO patch in here, it was a dependency for a cleanup of
an API in the regmap-irq code for which the gpio-104-dio-48e driver
was the only user.
Highlights:
- The maple tree cache can now load in default values more
efficiently, and is capabale of syncing multiple registers
in a single write during cache sync
- More KUnit coverage, including some coverage for raw I/O
and a dummy RAM backed cache to support it
- Removal of several old interfaces in regmap-irq now all
users have been modernised"
* tag 'regmap-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (23 commits)
regmap: Allow reads from write only registers with the flat cache
regmap: Drop early readability check
regmap: Check for register readability before checking cache during read
regmap: Add test to make sure we don't sync to read only registers
regmap: Add a test case for write only registers
regmap: Add test that writes to write only registers are prevented
regmap: Add debugfs file for forcing field writes
regmap: Don't check for changes in regcache_set_val()
regmap: maple: Implement block sync for the maple tree cache
regmap: Provide basic KUnit coverage for the raw register I/O
regmap: Provide a ram backed regmap with raw support
regmap: Add missing cache_only checks
regmap: regmap-irq: Move handle_post_irq to before pm_runtime_put
regmap: Load register defaults in blocks rather than register by register
regmap: mmio: Allow passing an empty config->reg_stride
regmap-irq: Drop backward compatibility for inverted mask/unmask
regmap-irq: Minor adjustments to .handle_mask_sync()
regmap-irq: Remove support for not_fixed_stride
regmap-irq: Remove type registers
regmap-irq: Remove virtual registers
...
|
|
regcache_maple_sync() tries to sync all cached values no matter
whether it's writable or not. OTOH, regache_sync_val() does care the
wrtability and returns -EIO for a read-only register. This results in
an error message like:
snd_hda_codec_realtek hdaudioC0D0: Unable to sync register 0x2f0009. -5
and the sync loop is aborted incompletely.
This patch adds the writable register check to regcache_sync_val() for
addressing the bug above.
Note that, although we may add the check in the caller side
(regcache_maple_sync()), here we put in regcache_sync_val(), so that a
similar case like this can be avoided in future.
Fixes: f033c26de5a5 ("regmap: Add maple tree based register cache")
Link: https://lore.kernel.org/r/877cs7g6f1.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230613112240.3361-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The only user of regcache_set_val() ignores the return value so we may as
well not bother checking if the value we are trying to set is the same as
the value already stored.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-regcache-set-val-no-ret-v1-1-9a6932760cf8@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For register maps where we can write multiple values in a single bus
operation it is generally much faster to do so. Improve the performance of
maple tree cache syncs on such devices by identifying blocks of adjacent
registers that need to be written out and combining them into a single
operation.
Combining writes does mean that we need to allocate a scratch buffer and
format the data into it but it is expected that for most cases where caches
are in use the cost of I/O will be much greater than the cost of doing the
allocation and format.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-regcache-maple-sync-raw-v1-1-8ddeb4e2b9ab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current state of the art for sparse register maps is the
rbtree cache. This works well for most applications but isn't
always ideal for sparser register maps since the rbtree can get
deep, requiring a lot of walking. Fortunately the kernel has a
data structure intended to address this very problem, the maple
tree. Provide an initial implementation of a register cache
based on the maple tree to start taking advantage of it.
The entries stored in the maple tree are arrays of register
values, with the maple tree keys holding the register addresses.
We store data in host native format rather than device native
format as we do for rbtree, this will be a benefit for devices
where we don't marshal data within regmap and simplifies the code
but will result in additional CPU overhead when syncing the cache
on devices where we do marshal data in regmap.
This should work well for a lot of devices, though there's some
additional areas that could be looked at such as caching the
last accessed entry like we do for rbtree and trying to minimise
the maple tree level locking. We should also use bulk writes
rather than single register writes when resyncing the cache where
possible, even if we don't store in device native format.
Very small register maps may continue to to better with rbtree
longer term.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230325-regcache-maple-v3-2-23e271f93dc7@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In order to support sparse caches that don't store data in raw format
factor out the parts of the raw block sync implementation that deal with
writing a single register via _regmap_write().
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230325-regcache-maple-v3-1-23e271f93dc7@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The compressed register cache support has assumptions that make it hard to
cover in testing, mainly that it requires raw registers defaults be
provided. Rather than either address these assumptions or leave it untested
by the forthcoming KUnit tests let's remove it, the use case is quite thin
and there are no current users.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230324-regcache-lzo-v1-1-08c5d63e2a5e@kernel.org
|
|
The error message printed when we fail to locate the cache type the map
requested says it can't find a compress type rather than a cache type,
fix that. Since the compressed type is the only one currently compiled
conditionally it's likely to be the missing type but that might not always
be true and is still unclear.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230324-regcache-unknown-v1-1-80deecbf196b@kernel.org
|
|
If there is no cache entry available we will get -ENOENT from the cache
implementation, handle this gracefully and skip rather than treating it as
an error.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230325-regcache-sparse-sync-v1-1-2a890239d061@kernel.org
|
|
checkpatch.pl warned:
WARNING: ENOSYS means 'invalid syscall nr' and nothing else
Align the return value to regcache_drop_region().
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230313071812.13577-2-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no sense in doing a cache sync on REGCACHE_NONE regmaps.
Instead of panicking the kernel due to missing cache_ops, return an error
to client driver.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230313071812.13577-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When num_reg_defaults > 0 but reg_defaults is NULL, there will be a
NULL pointer exception.
Current code has no such usage, but as additional hardening, also
check this to prevent any chance of crashing.
Signed-off-by: Schspa Shi <schspa@gmail.com>
Link: https://lore.kernel.org/r/20220629130951.63040-1-schspa@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For devices with no cache it can make sense to use cache only mode as a
mechanism for trapping writes to hardware which is inaccessible but since
no cache is equivalent to cache bypass we force such devices into bypass
mode. This means that our check that bypass and cache only mode aren't both
enabled simultanously is less sensible for devices without a cache so relax
it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220622171723.1235749-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Delete the redundant word 'the'.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220604041603.9697-1-wangxiang@cdjrlc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current logic does not consider multi-stride cases,
the max_register have to calculate with reg_stride
because it is a kind of address range.
Signed-off-by: Jeongtae Park <jtp.park@samsung.com>
Link: https://lore.kernel.org/r/20220425114613.15934-1-jtp.park@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix the following coccicheck warnings:
./drivers/base/regmap/regcache.c:71:3-18: WARNING: Assignment of
0/1 to bool variable.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Link: https://lore.kernel.org/r/1611215961-33725-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Non-incrementing writes can fail if register + length crosses page
border. However for non-incrementing writes we should not check for page
border crossing. Fix this by passing additional flag to _regmap_raw_write
and passing length to _regmap_select_page basing on the flag.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: cdf6b11daa77 ("regmap: Add regmap_noinc_write API")
Link: https://lore.kernel.org/r/20200917153405.3139200-2-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There were a few files in the regmap code that did not have SPDX
identifiers on them, so fix that up. At the same time, remove the "free
form" text that specified the license of the file, as that is impossible
for any tool to properly parse.
Also, as Mark loves // comment markers, convert all of the headers to be
the same to make things look consistent :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Reported-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 2cbbb579bcbe3 ("regmap: Add the LZO cache support") added support
for LZO compression in regcache, but there were never any users added
afterwards. Since LZO support itself has its own size, it currently is
rather a deoptimization.
So make it optional by introducing a symbol that can be selected by
drivers wanting to make use of it.
Saves e.g. ~46 kB on MIPS (size of LZO support + regcache LZO code).
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Most of the kernel-doc comments in regmap don't actually generate
correctly. This patch fixes up a few common issues, corrects some typos
and adds some missing argument descriptions.
The most common issues being using a : after the function name which
causes the short description to not render correctly and not separating
the long and short descriptions of the function. There are quite a few
instances of arguments not being described or given the wrong name as
well.
This patch doesn't fixup functions/structures that are currently missing
descriptions.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In 3245d460 (regmap: cache: Fall back to register by register read for
cache defaults) non-readable registers are skipped when initializing
reg_defaults, but are still included in num_reg_defaults. So there can
be uninitialized entries at the end of reg_defaults, which can cause
problems when the register cache initializes from the full array.
Fixed it by excluding non-readable registers from the count as well.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Setting the flag 'cache_bypass' will bypass the cache not the hardware.
Fix this comment here.
Fixes: 0eef6b0415f5 ("regmap: Fix doc comment")
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
|
|
If we are unable to read the cache defaults for a regmap then fall back
on attempting to read them word by word. This is going to be painfully
slow for large regmaps but might be adequate for smaller ones.
Signed-off-by: Mark Brown <broonie@kernel.org>
[maciej: Use cache_bypass around read and skipping of unreadable regs]
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
regcache_hw_init() uses regmap_raw_read() to initialize cache
when reg_defaults_raw isn't provided.
The last parameter to regmap_raw_read() is buffer size in bytes,
however regcache_hw_init() called it with number of registers
to read instead, which cause problem if they aren't one byte
wide in cache.
This wasn't triggered by any of current in-tree drivers
since they either have one-byte registers or provide
reg_defaults_raw explicitly.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'regmap/topic/irq-type' into regmap-next
|
|
If the register defaults are provided by the driver without the
number by mistake, it should just return an error with one promotion.
This should be as early as possible, then there is no need to verify
the register defaults' stride and the other code followed.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If there is no cache used for the drivers, the register defaults
or the register defaults raw are not need any more. This patch
will check this and print a warning.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since the mmio has support the 64-bit has been supported for the
64-bit platform, so should the regcache core too.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There will be some warning like the following when checking new
patches near this code:
"WARNING: Missing a blank line after declarations"
This patch will suppress this warning.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Its a bit odd that debugfs_create_bool() takes 'u32 *' as an argument,
when all it needs is a boolean pointer.
It would be better to update this API to make it accept 'bool *'
instead, as that will make it more consistent and often more convenient.
Over that bool takes just a byte.
That required updates to all user sites as well, in the same commit
updating the API. regmap core was also using
debugfs_{read|write}_file_bool(), directly and variable types were
updated for that to be bool as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
use_single_rw currently reflects the capabilities of the connected
device. The capabilities of the bus are currently missing for this
variable.
As there are read only and write only buses we need seperate values for
use_single_rw to also reflect tha capabilities of the bus.
This patch splits use_single_rw into use_single_read and
use_single_write. The initialization is changed to check the
configuration for use_single_rw and to check the capabilities of the
used bus.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Existing regmap users call regcache_mark_dirty() as part of the
suspend/resume sequence, to tell regcache that non-default values need to
be resynced post-resume. Add an internal "no_sync_defaults" regmap flag
to remember this state, so that regcache_sync() can differentiate between
these two cases:
1) HW was reset, so any cache values that match map->reg_defaults can be
safely skipped. On some chips there are a lot of registers in the
reg_defaults list, so this optimization speeds things up quite a bit.
2) HW was not reset (maybe it was just clock-gated), so if we cached
any writes, they should be sent to the hardware regardless of whether
they match the HW default. Currently this will write out all values in
the regcache, since we don't maintain per-register dirty bits.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We're going to add another "does this register need syncing?" check, so
rather than repeating it in three places, we'll separate all of the
relevant logic into a helper function.
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap update from Mark Brown:
"Just one patch for regmap this time around, a change from Steven
Rostedt to prettify the way we're making the regmap internal header
available to the trace events (it turns out that the trace subsystem
doesn't actually need to be in trace/events)"
* tag 'regmap-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Move tracing header into drivers/base/regmap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"This patch fixes a bad interaction between the support that was added
for having regmaps without devices for early system controller
initialization and the trace support.
There's a very good analysis of the actual issue in the commit message
for the change"
* tag 'regmap-fix-v4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: introduce regmap_name to fix syscon regmap trace events
|
|
The tracing events for regmap are confined to the regmap subsystem. It
also requires accessing an internal header. Instead of including the
internal header from a generic file location, move the tracing file
into the regmap directory.
Also rename the regmap tracing header to trace.h, as it is redundant to
keep the regmap.h name when it is in the regmap directory.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch fixes a NULL pointer dereference when enabling regmap event
tracing in the presence of a syscon regmap, introduced by commit bdb0066df96e
("mfd: syscon: Decouple syscon interface from platform devices").
That patch introduced syscon regmaps that have their dev field set to NULL.
The regmap trace events expect it to point to a valid struct device and feed
it to dev_name():
$ echo 1 > /sys/kernel/debug/tracing/events/regmap/enable
Unable to handle kernel NULL pointer dereference at virtual address 0000002c
pgd = 80004000
[0000002c] *pgd=00000000
Internal error: Oops: 17 [#1] SMP ARM
Modules linked in: coda videobuf2_vmalloc
CPU: 0 PID: 304 Comm: kworker/0:2 Not tainted 4.0.0-rc2+ #9197
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Workqueue: events_freezable thermal_zone_device_check
task: 9f25a200 ti: 9f1ee000 task.ti: 9f1ee000
PC is at ftrace_raw_event_regmap_block+0x3c/0xe4
LR is at _regmap_raw_read+0x1bc/0x1cc
pc : [<803636e8>] lr : [<80365f2c>] psr: 600f0093
sp : 9f1efd78 ip : 9f1efdb8 fp : 9f1efdb4
r10: 00000004 r9 : 00000001 r8 : 00000001
r7 : 00000180 r6 : 00000000 r5 : 9f00e3c0 r4 : 00000003
r3 : 00000001 r2 : 00000180 r1 : 00000000 r0 : 9f00e3c0
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c5387d Table: 2d91004a DAC: 00000015
Process kworker/0:2 (pid: 304, stack limit = 0x9f1ee210)
Stack: (0x9f1efd78 to 0x9f1f0000)
fd60: 9f1efda4 9f1efd88
fd80: 800708c0 805f9510 80927140 800f0013 9f1fc800 9eb2f490 00000000 00000180
fda0: 808e3840 00000001 9f1efdfc 9f1efdb8 80365f2c 803636b8 805f8958 800708e0
fdc0: a00f0013 803636ac 9f16de00 00000180 80927140 9f1fc800 9f1fc800 9f1efe6c
fde0: 9f1efe6c 9f732400 00000000 00000000 9f1efe1c 9f1efe00 80365f70 80365d7c
fe00: 80365f3c 9f1fc800 9f1fc800 00000180 9f1efe44 9f1efe20 803656a4 80365f48
fe20: 9f1fc800 00000180 9f1efe6c 9f1efe6c 9f732400 00000000 9f1efe64 9f1efe48
fe40: 803657bc 80365634 00000001 9e95f910 9f1fc800 9f1efeb4 9f1efe8c 9f1efe68
fe60: 80452ac0 80365778 9f1efe8c 9f1efe78 9e93d400 9e93d5e8 9f1efeb4 9f72ef40
fe80: 9f1efeac 9f1efe90 8044e11c 80452998 8045298c 9e93d608 9e93d400 808e1978
fea0: 9f1efecc 9f1efeb0 8044fd14 8044e0d0 ffffffff 9f25a200 9e93d608 9e481380
fec0: 9f1efedc 9f1efed0 8044fde8 8044fcec 9f1eff1c 9f1efee0 80038d50 8044fdd8
fee0: 9f1ee020 9f72ef40 9e481398 00000000 00000008 9f72ef54 9f1ee020 9f72ef40
ff00: 9e481398 9e481380 00000008 9f72ef40 9f1eff5c 9f1eff20 80039754 80038bfc
ff20: 00000000 9e481380 80894100 808e1662 00000000 9e4f2ec0 00000000 9e481380
ff40: 800396f8 00000000 00000000 00000000 9f1effac 9f1eff60 8003e020 80039704
ff60: ffffffff 00000000 ffffffff 9e481380 00000000 00000000 9f1eff78 9f1eff78
ff80: 00000000 00000000 9f1eff88 9f1eff88 9e4f2ec0 8003df30 00000000 00000000
ffa0: 00000000 9f1effb0 8000eb60 8003df3c 00000000 00000000 00000000 00000000
ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
Backtrace:
[<803636ac>] (ftrace_raw_event_regmap_block) from [<80365f2c>] (_regmap_raw_read+0x1bc/0x1cc)
r9:00000001 r8:808e3840 r7:00000180 r6:00000000 r5:9eb2f490 r4:9f1fc800
[<80365d70>] (_regmap_raw_read) from [<80365f70>] (_regmap_bus_read+0x34/0x6c)
r10:00000000 r9:00000000 r8:9f732400 r7:9f1efe6c r6:9f1efe6c r5:9f1fc800
r4:9f1fc800
[<80365f3c>] (_regmap_bus_read) from [<803656a4>] (_regmap_read+0x7c/0x144)
r6:00000180 r5:9f1fc800 r4:9f1fc800 r3:80365f3c
[<80365628>] (_regmap_read) from [<803657bc>] (regmap_read+0x50/0x70)
r9:00000000 r8:9f732400 r7:9f1efe6c r6:9f1efe6c r5:00000180 r4:9f1fc800
[<8036576c>] (regmap_read) from [<80452ac0>] (imx_get_temp+0x134/0x1a4)
r6:9f1efeb4 r5:9f1fc800 r4:9e95f910 r3:00000001
[<8045298c>] (imx_get_temp) from [<8044e11c>] (thermal_zone_get_temp+0x58/0x74)
r7:9f72ef40 r6:9f1efeb4 r5:9e93d5e8 r4:9e93d400
[<8044e0c4>] (thermal_zone_get_temp) from [<8044fd14>] (thermal_zone_device_update+0x34/0xec)
r6:808e1978 r5:9e93d400 r4:9e93d608 r3:8045298c
[<8044fce0>] (thermal_zone_device_update) from [<8044fde8>] (thermal_zone_device_check+0x1c/0x20)
r5:9e481380 r4:9e93d608
[<8044fdcc>] (thermal_zone_device_check) from [<80038d50>] (process_one_work+0x160/0x3d4)
[<80038bf0>] (process_one_work) from [<80039754>] (worker_thread+0x5c/0x4f4)
r10:9f72ef40 r9:00000008 r8:9e481380 r7:9e481398 r6:9f72ef40 r5:9f1ee020
r4:9f72ef54
[<800396f8>] (worker_thread) from [<8003e020>] (kthread+0xf0/0x108)
r10:00000000 r9:00000000 r8:00000000 r7:800396f8 r6:9e481380 r5:00000000
r4:9e4f2ec0
[<8003df30>] (kthread) from [<8000eb60>] (ret_from_fork+0x14/0x34)
r7:00000000 r6:00000000 r5:8003df30 r4:9e4f2ec0
Code: e3140040 1a00001a e3140020 1a000016 (e596002c)
---[ end trace 193c15c2494ec960 ]---
Fixes: bdb0066df96e (mfd: syscon: Decouple syscon interface from platform devices)
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
regcache_sync() spews warnings when a value was cached for a read-only
register as it tries to write all registers no matter whether they are
writable or not. This patch adds regmap_wrtieable() checks for
avoiding it in regcache_sync_block_single() and regcache_block_raw().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'regmap/topic/headers' into regmap-next
|
|
If the inlcude headers aren't sorted alphabetically, then the
logical choice is to append new ones, however that creates a
lot of potential for conflicts or duplicates because every change
will then add new includes in the same location.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
