summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)AuthorFilesLines
2023-11-07nbd: fix uaf in nbd_openLi Lingfeng1-2/+9
Commit 4af5f2e03013 ("nbd: use blk_mq_alloc_disk and blk_cleanup_disk") cleans up disk by blk_cleanup_disk() and it won't set disk->private_data as NULL as before. UAF may be triggered in nbd_open() if someone tries to open nbd device right after nbd_put() since nbd has been free in nbd_dev_remove(). Fix this by implementing ->free_disk and free private data in it. Fixes: 4af5f2e03013 ("nbd: use blk_mq_alloc_disk and blk_cleanup_disk") Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20231107103435.2074904-1-lilingfeng@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-05Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-1/+3
Pull virtio updates from Michael Tsirkin: "vhost,virtio,vdpa: features, fixes, cleanups. vdpa/mlx5: - VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK - new maintainer vdpa: - support for vq descriptor mappings - decouple reset of iotlb mapping from device reset and fixes, cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits) vdpa_sim: implement .reset_map support vdpa/mlx5: implement .reset_map driver op vhost-vdpa: clean iotlb map during reset for older userspace vdpa: introduce .compat_reset operation callback vhost-vdpa: introduce IOTLB_PERSIST backend feature bit vhost-vdpa: reset vendor specific mapping to initial state in .release vdpa: introduce .reset_map operation callback virtio_pci: add check for common cfg size virtio-blk: fix implicit overflow on virtio_max_dma_size virtio_pci: add build offset check for the new common cfg items virtio: add definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit vduse: make vduse_class constant vhost-scsi: Spelling s/preceeding/preceding/g virtio: kdoc for struct virtio_pci_modern_device vdpa: Update sysfs ABI documentation MAINTAINERS: Add myself as mlx5_vdpa driver virtio-balloon: correct the comment of virtballoon_migratepage() mlx5_vdpa: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK vdpa/mlx5: Update cvq iotlb mapping on ASID change vdpa/mlx5: Make iotlb helper functions more generic ...
2023-11-02Merge tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linuxLinus Torvalds4-132/+237
Pull block updates from Jens Axboe: - Improvements to the queue_rqs() support, and adding null_blk support for that as well (Chengming) - Series improving badblocks support (Coly) - Key store support for sed-opal (Greg) - IBM partition string handling improvements (Jan) - Make number of ublk devices supported configurable (Mike) - Cancelation improvements for ublk (Ming) - MD pull requests via Song: - Handle timeout in md-cluster, by Denis Plotnikov - Cleanup pers->prepare_suspend, by Yu Kuai - Rewrite mddev_suspend(), by Yu Kuai - Simplify md_seq_ops, by Yu Kuai - Reduce unnecessary locking array_state_store(), by Mariusz Tkaczyk - Make rdev add/remove independent from daemon thread, by Yu Kuai - Refactor code around quiesce() and mddev_suspend(), by Yu Kuai - NVMe pull request via Keith: - nvme-auth updates (Mark) - nvme-tcp tls (Hannes) - nvme-fc annotaions (Kees) - Misc cleanups and improvements (Jiapeng, Joel) * tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux: (95 commits) block: ublk_drv: Remove unused function md: cleanup pers->prepare_suspend() nvme-auth: allow mixing of secret and hash lengths nvme-auth: use transformed key size to create resp nvme-auth: alloc nvme_dhchap_key as single buffer nvmet-tcp: use 'spin_lock_bh' for state_lock() powerpc/pseries: PLPKS SED Opal keystore support block: sed-opal: keystore access for SED Opal keys block:sed-opal: SED Opal keystore ublk: simplify aborting request ublk: replace monitor with cancelable uring_cmd ublk: quiesce request queue when aborting queue ublk: rename mm_lock as lock ublk: move ublk_cancel_dev() out of ub->mutex ublk: make sure io cmd handled in submitter task context ublk: don't get ublk device reference in ublk_abort_queue() ublk: Make ublks_max configurable ublk: Limit dev_id/ub_number values md-cluster: check for timeout while a new disk adding nvme: rework NVME_AUTH Kconfig selection ...
2023-11-01virtio-blk: fix implicit overflow on virtio_max_dma_sizezhenwei pi1-1/+3
The following codes have an implicit conversion from size_t to u32: (u32)max_size = (size_t)virtio_max_dma_size(vdev); This may lead overflow, Ex (size_t)4G -> (u32)0. Once virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX instead. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20230904061045.510460-1-pizhenwei@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-31Merge tag 'hardening-v6.7-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "One of the more voluminous set of changes is for adding the new __counted_by annotation[1] to gain run-time bounds checking of dynamically sized arrays with UBSan. - Add LKDTM test for stuck CPUs (Mark Rutland) - Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo) - Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva) - Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh) - Convert group_info.usage to refcount_t (Elena Reshetova) - Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva) - Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn) - Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook) - Fix strtomem() compile-time check for small sources (Kees Cook)" * tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits) hwmon: (acpi_power_meter) replace open-coded kmemdup_nul reset: Annotate struct reset_control_array with __counted_by kexec: Annotate struct crash_mem with __counted_by virtio_console: Annotate struct port_buffer with __counted_by ima: Add __counted_by for struct modsig and use struct_size() MAINTAINERS: Include stackleak paths in hardening entry string: Adjust strtomem() logic to allow for smaller sources hardening: x86: drop reference to removed config AMD_IOMMU_V2 randstruct: Fix gcc-plugin performance mode to stay in group mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by irqchip/imx-intmux: Annotate struct intmux_data with __counted_by KVM: Annotate struct kvm_irq_routing_table with __counted_by virt: acrn: Annotate struct vm_memory_region_batch with __counted_by hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by sparc: Annotate struct cpuinfo_tree with __counted_by isdn: kcapi: replace deprecated strncpy with strscpy_pad isdn: replace deprecated strncpy with strscpy NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by ...
2023-10-28block: move bdev_mark_dead out of disk_check_media_changeChristoph Hellwig2-2/+6
disk_check_media_change is mostly called from ->open where it makes little sense to mark the file system on the device as dead, as we are just opening it. So instead of calling bdev_mark_dead from disk_check_media_change move it into the few callers that are not in an open instance. This avoid calling into bdev_mark_dead and thus taking s_umount with open_mutex held. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231017184823.1383356-4-hch@lst.de Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-28zram: Convert to use bdev_open_by_dev()Jan Kara2-18/+15
Convert zram to use bdev_open_by_dev() and pass the handle around. CC: Minchan Kim <minchan@kernel.org> CC: Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230927093442.25915-8-jack@suse.cz Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-28xen/blkback: Convert to bdev_open_by_dev()Jan Kara3-23/+25
Convert xen/blkback to use bdev_open_by_dev() and pass the handle around. CC: xen-devel@lists.xenproject.org Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230927093442.25915-7-jack@suse.cz Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-28rnbd-srv: Convert to use bdev_open_by_path()Jan Kara2-14/+15
Convert rnbd-srv to use bdev_open_by_path() and pass the handle around. CC: Jack Wang <jinpu.wang@ionos.com> CC: "Md. Haris Iqbal" <haris.iqbal@ionos.com> Acked-by: "Md. Haris Iqbal" <haris.iqbal@ionos.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230927093442.25915-6-jack@suse.cz Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-28pktcdvd: Convert to bdev_open_by_dev()Jan Kara1-35/+41
Convert pktcdvd to use bdev_open_by_dev(). Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230927093442.25915-5-jack@suse.cz Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-28drdb: Convert to use bdev_open_by_path()Jan Kara2-33/+34
Convert drdb to use bdev_open_by_path(). CC: drbd-dev@lists.linbit.com Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230927093442.25915-4-jack@suse.cz Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-19block: ublk_drv: Remove unused functionJiapeng Chong1-9/+0
The function are defined in the ublk_drv.c file, but not called elsewhere, so delete the unused function. drivers/block/ublk_drv.c:1211:20: warning: unused function 'ublk_abort_io_cmds'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6938 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Fixes: b4e1353f4651 ("ublk: simplify aborting request") Reviewed-by: Ming Lei <ming.lei@rehdat.com> Link: https://lore.kernel.org/r/20231019030444.53680-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-17ublk: simplify aborting requestMing Lei1-30/+11
Now ublk_abort_queue() is run exclusively with ublk_queue_rq() and the ubq_daemon task, so simplify aborting request: - set UBLK_IO_FLAG_ABORTED in ublk_abort_queue() just for aborting this request - abort request in ublk_queue_rq() if ubq->canceling is set Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20231009093324.957829-8-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-17ublk: replace monitor with cancelable uring_cmdMing Lei1-89/+119
Monitor work actually introduces one extra context for handling abort, this way is easy to cause race, and also introduce extra delay when handling aborting. Now we start to support cancelable uring_cmd, so use it instead: 1) this cancel callback is either run from the uring cmd submission task context or called after the io_uring context is exit, so the callback is run exclusively with ublk_ch_uring_cmd() and __ublk_rq_task_work(). 2) the previous patch freezes request queue when calling ublk_abort_queue(), which is now completely exclusive with ublk_queue_rq() and ublk_ch_uring_cmd()/__ublk_rq_task_work(). 3) in timeout handler, if all IOs are in-flight, then all uring commands are completed, uring command canceling can't help us to provide forward progress any more, so call ublk_abort_requests() in timeout handler. This way simplifies aborting queue, and is helpful for adding new feature, such as, relax the limit of using single task for handling one queue. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20231009093324.957829-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-17ublk: quiesce request queue when aborting queueMing Lei1-9/+50
So far aborting queue ends request when the ubq daemon is exiting, and it can be run concurrently with ublk_queue_rq(), this way is fragile and we depend on the tricky usage of UBLK_IO_FLAG_ABORTED for avoiding such race. Quiesce queue when aborting queue, and the two code paths can be run completely exclusively, then it becomes easier to add new ublk feature, such as relaxing single same task limit for each queue. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20231009093324.957829-6-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-17ublk: rename mm_lock as lockMing Lei1-4/+4
Rename mm_lock field of ublk_device as lock, so that this lock can be reused for protecting access of ub->ub_disk, which will be used for simplifying ublk_abort_queue() by quiesce queue in next patch. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20231009093324.957829-5-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-17ublk: move ublk_cancel_dev() out of ub->mutexMing Lei1-17/+23
ublk_cancel_dev() just calls ublk_cancel_queue() to cancel all pending io commands after ublk request queue is idle. The only protection is just the read & write of ubq->nr_io_ready and avoid duplicated command cancel, so add one per-queue lock with cancel flag for providing this protection, meantime move ublk_cancel_dev() out of ub->mutex. Then we needn't to call io_uring_cmd_complete_in_task() to cancel pending command. And the same cancel logic will be re-used for cancelable uring command. This patch basically reverts commit ac5902f84bb5 ("ublk: fix AB-BA lockdep warning"). Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20231009093324.957829-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-17ublk: make sure io cmd handled in submitter task contextMing Lei1-1/+21
In well-done ublk server implementation, ublk io command won't be linked into any link chain. Meantime they are always handled in no-wait style, so basically io cmd is always handled in submitter task context. However, the server may set IOSQE_ASYNC, or io command is linked to one chain mistakenly, then we may still run into io-wq context and ctx->uring_lock isn't held. So in case of IO_URING_F_UNLOCKED, schedule this command by io_uring_cmd_complete_in_task to force running it in submitter task. Then ublk_ch_uring_cmd_local() is guaranteed to run with context uring_lock held, and we needn't to worry about sync among submission code path any more. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20231009093324.957829-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-17ublk: don't get ublk device reference in ublk_abort_queue()Ming Lei1-4/+0
ublk_abort_queue() is called in ublk_daemon_monitor_work(), in which it is guaranteed that the device is live because monitor work is canceled when removing device, so no need to get the device reference. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20231009093324.957829-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-17ublk: Make ublks_max configurableMike Christie1-1/+16
We are converting tcmu applications to ublk, but have systems with up to 1k devices. This patch allows us to configure the ublks_max from userspace with the ublks_max modparam. Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20231012150600.6198-3-michael.christie@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-17ublk: Limit dev_id/ub_number valuesMike Christie1-1/+9
The dev_id/ub_number is used for the ublk dev's char device's minor number so it has to fit into MINORMASK. This patch adds checks to prevent userspace from passing a number that's too large and limits what can be allocated by the ublk_index_idr for the case where userspace has the kernel allocate the dev_id/ub_number. Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20231012150600.6198-2-michael.christie@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-07Merge tag 'block-6.6-2023-10-06' of git://git.kernel.dk/linuxLinus Torvalds1-1/+2
Pull block fixes from Jens Axboe: "Just two minor fixes, for nbd and md" * tag 'block-6.6-2023-10-06' of git://git.kernel.dk/linux: nbd: don't call blk_mark_disk_dead nbd_clear_sock_ioctl md/raid5: release batch_last before waiting for another stripe_head
2023-10-04nbd: don't call blk_mark_disk_dead nbd_clear_sock_ioctlChristoph Hellwig1-1/+2
blk_mark_disk_dead is the proper interface to shut down a block device, but it also makes the disk unusable forever. nbd_clear_sock_ioctl on the other hand wants to shut down the file system, but allow the block device to be used again when when connected to another socket. Switch nbd to use disk_force_media_change and nbd_bdev_reset to go back to a behavior of the old __invalidate_device call, with the added benefit of incrementing the device generation as there is no guarantee the old content comes back when the device is reconnected. Reported-by: Samuel Holland <samuel.holland@sifive.com> Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: 0c1c9a27ce90 ("nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl") Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20231003153106.1331363-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-04aoe: replace strncpy with strscpyJustin Stitt1-2/+1
`strncpy` is deprecated for use on NUL-terminated destination strings [1]. `aoe_iflist` is expected to be NUL-terminated which is evident by its use with string apis later on like `strspn`: | p = aoe_iflist + strspn(aoe_iflist, WHITESPACE); It also seems `aoe_iflist` does not need to be NUL-padded which means `strscpy` [2] is a suitable replacement due to the fact that it guarantees NUL-termination on the destination buffer while not unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Cc: Kees Cook <keescook@chromium.org> Cc: Xu Panda <xu.panda@zte.com.cn> Cc: Yang Yang <yang.yang29@zte.com> Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230919-strncpy-drivers-block-aoe-aoenet-c-v2-1-3d5d158410e9@google.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-04null_blk: replace strncpy with strscpyJustin Stitt1-1/+1
`strncpy` is deprecated for use on NUL-terminated destination strings [1]. We should favor a more robust and less ambiguous interface. We expect that both `nullb->disk_name` and `disk->disk_name` be NUL-terminated: | snprintf(nullb->disk_name, sizeof(nullb->disk_name), | "%s", config_item_name(&dev->group.cg_item)); ... | pr_info("disk %s created\n", nullb->disk_name); It seems like NUL-padding may be required due to __assign_disk_name() utilizing a memcpy as opposed to a `str*cpy` api. | static inline void __assign_disk_name(char *name, struct gendisk *disk) | { | if (disk) | memcpy(name, disk->disk_name, DISK_NAME_LEN); | else | memset(name, 0, DISK_NAME_LEN); | } Then we go and print it with `__print_disk_name` which wraps `nullb_trace_disk_name()`. | #define __print_disk_name(name) nullb_trace_disk_name(p, name) This function obviously expects a NUL-terminated string. | const char *nullb_trace_disk_name(struct trace_seq *p, char *name) | { | const char *ret = trace_seq_buffer_ptr(p); | | if (name && *name) | trace_seq_printf(p, "disk=%s, ", name); | trace_seq_putc(p, 0); | | return ret; | } >From the above, we need both 1) a NUL-terminated string and 2) a NUL-padded string. So, let's use strscpy_pad() as per Kees' suggestion from v1. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Cc: Kees Cook <keescook@chromium.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230919-strncpy-drivers-block-null_blk-main-c-v3-1-10cf0a87a2c3@google.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-02drbd: Annotate struct fifo_buffer with __counted_byKees Cook1-1/+1
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct fifo_buffer. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230915200316.never.707-kees@kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2023-09-26rbd: take header_rwsem in rbd_dev_refresh() only when updatingIlya Dryomov1-11/+11
rbd_dev_refresh() has been holding header_rwsem across header and parent info read-in unnecessarily for ages. With commit 870611e4877e ("rbd: get snapshot context after exclusive lock is ensured to be held"), the potential for deadlocks became much more real owning to a) header_rwsem now nesting inside lock_rwsem and b) rw_semaphores not allowing new readers after a writer is registered. For example, assuming that I/O request 1, I/O request 2 and header read-in request all target the same OSD: 1. I/O request 1 comes in and gets submitted 2. watch error occurs 3. rbd_watch_errcb() takes lock_rwsem for write, clears owner_cid and releases lock_rwsem 4. after reestablishing the watch, rbd_reregister_watch() calls rbd_dev_refresh() which takes header_rwsem for write and submits a header read-in request 5. I/O request 2 comes in: after taking lock_rwsem for read in __rbd_img_handle_request(), it blocks trying to take header_rwsem for read in rbd_img_object_requests() 6. another watch error occurs 7. rbd_watch_errcb() blocks trying to take lock_rwsem for write 8. I/O request 1 completion is received by the messenger but can't be processed because lock_rwsem won't be granted anymore 9. header read-in request completion can't be received, let alone processed, because the messenger is stranded Change rbd_dev_refresh() to take header_rwsem only for actually updating rbd_dev->header. Header and parent info read-in don't need any locking. Cc: stable@vger.kernel.org # 0b035401c570: rbd: move rbd_dev_refresh() definition Cc: stable@vger.kernel.org # 510a7330c82a: rbd: decouple header read-in from updating rbd_dev->header Cc: stable@vger.kernel.org # c10311776f0a: rbd: decouple parent info read-in from updating rbd_dev Cc: stable@vger.kernel.org Fixes: 870611e4877e ("rbd: get snapshot context after exclusive lock is ensured to be held") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2023-09-26rbd: decouple parent info read-in from updating rbd_devIlya Dryomov1-62/+80
Unlike header read-in, parent info read-in is already decoupled in get_parent_info(), but it's buried in rbd_dev_v2_parent_info() along with the processing logic. Separate the initial read-in and update read-in logic into rbd_dev_setup_parent() and rbd_dev_update_parent() respectively and have rbd_dev_v2_parent_info() just populate struct parent_image_info (i.e. what get_parent_info() did). Some existing QoI issues, like flatten of a standalone clone being disregarded on refresh, remain. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2023-09-26rbd: decouple header read-in from updating rbd_dev->headerIlya Dryomov1-92/+114
Make rbd_dev_header_info() populate a passed struct rbd_image_header instead of rbd_dev->header and introduce rbd_dev_update_header() for updating mutable fields in rbd_dev->header upon refresh. The initial read-in of both mutable and immutable fields in rbd_dev_image_probe() passes in rbd_dev->header so no update step is required there. rbd_init_layout() is now called directly from rbd_dev_image_probe() instead of individually in format 1 and format 2 implementations. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2023-09-26rbd: move rbd_dev_refresh() definitionIlya Dryomov1-35/+33
Move rbd_dev_refresh() definition further down to avoid having to move struct parent_image_info definition in the next commit. This spares some forward declarations too. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2023-09-22block/null_blk: add queue_rqs() supportChengming Zhou1-0/+20
Add batched mq_ops.queue_rqs() support in null_blk for testing. The implementation is much easy since null_blk doesn't have commit_rqs(). We simply handle each request one by one, if errors are encountered, leave them in the passed in list and return back. There is about 3.6% improvement in IOPS of fio/t/io_uring on null_blk with hw_queue_depth=256 on my test VM, from 1.09M to 1.13M. Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230913151616.3164338-6-chengming.zhou@linux.dev Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-22blk-mq: update driver tags request table when start requestChengming Zhou1-2/+0
Now we update driver tags request table in blk_mq_get_driver_tag(), so the driver that support queue_rqs() have to update that inflight table by itself. Move it to blk_mq_start_request(), which is a better place where we setup the deadline for request timeout check. And it's just where the request becomes inflight. Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230913151616.3164338-5-chengming.zhou@linux.dev Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-09Merge tag 'block-6.6-2023-09-08' of git://git.kernel.dk/linuxLinus Torvalds2-3/+11
Pull block fixes from Jens Axboe: - Fix null_blk polled IO timeout handling (Chengming) - Regression fix for swapped arguments in drbd bvec_set_page() (Christoph) - String length handling fix for s390 dasd (Heiko) - Fixes for blk-throttle accounting (Yu) - Fix page pinning issue for same page segments (Christoph) - Remove redundant file_remove_privs() call (Christoph) - Fix a regression in partition handling for devices not supporting partitions (Li) * tag 'block-6.6-2023-09-08' of git://git.kernel.dk/linux: drbd: swap bvec_set_page len and offset block: fix pin count management when merging same-page segments null_blk: fix poll request timeout handling s390/dasd: fix string length handling block: don't add or resize partition on the disk with GENHD_FL_NO_PART block: remove the call to file_remove_privs in blkdev_write_iter blk-throttle: consider 'carryover_ios/bytes' in throtl_trim_slice() blk-throttle: use calculate_io/bytes_allowed() for throtl_trim_slice() blk-throttle: fix wrong comparation while 'carryover_ios/bytes' is negative blk-throttle: print signed value 'carryover_bytes/ios' for user
2023-09-06Merge tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-clientLinus Torvalds1-3/+1
Pull ceph updates from Ilya Dryomov: "Mixed with some fixes and cleanups, this brings in reasonably complete fscrypt support to CephFS! The list of things which don't work with encryption should be fairly short, mostly around the edges: fallocate (not supported well in CephFS to begin with), copy_file_range (requires re-encryption), non-default striping patterns. This was a multi-year effort principally by Jeff Layton with assistance from Xiubo Li, Luís Henriques and others, including several dependant changes in the MDS, netfs helper library and fscrypt framework itself" * tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-client: (53 commits) ceph: make num_fwd and num_retry to __u32 ceph: make members in struct ceph_mds_request_args_ext a union rbd: use list_for_each_entry() helper libceph: do not include crypto/algapi.h ceph: switch ceph_lookup/atomic_open() to use new fscrypt helper ceph: fix updating i_truncate_pagecache_size for fscrypt ceph: wait for OSD requests' callbacks to finish when unmounting ceph: drop messages from MDS when unmounting ceph: update documentation regarding snapshot naming limitations ceph: prevent snapshot creation in encrypted locked directories ceph: add support for encrypted snapshot names ceph: invalidate pages when doing direct/sync writes ceph: plumb in decryption during reads ceph: add encryption support to writepage and writepages ceph: add read/modify/write to ceph_sync_write ceph: align data in pages in ceph_sync_write ceph: don't use special DIO path for encrypted inodes ceph: add truncate size handling support for fscrypt ceph: add object version support for sync read libceph: allow ceph_osdc_new_request to accept a multi-op read ...
2023-09-06drbd: swap bvec_set_page len and offsetChristoph Böhmwalder1-1/+1
bvec_set_page has the following signature: static inline void bvec_set_page(struct bio_vec *bv, struct page *page, unsigned int len, unsigned int offset) However, the usage in DRBD swaps the len and offset parameters. This leads to a bvec with length=0 instead of the intended length=4096, which causes sock_sendmsg to return -EIO. This leaves DRBD unable to transmit any pages and thus completely broken. Swapping the parameters fixes the regression. Fixes: eeac7405c735 ("drbd: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage()") Reported-by: Serguei Ivantsov <manowar@gsc-game.com> Link: https://lore.kernel.org/regressions/CAKH+VT3YLmAn0Y8=q37UTDShqxDLsqPcQ4hBMzY7HPn7zNx+RQ@mail.gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230906133034.948817-1-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-01null_blk: fix poll request timeout handlingChengming Zhou1-2/+10
When doing io_uring benchmark on /dev/nullb0, it's easy to crash the kernel if poll requests timeout triggered, as reported by David. [1] BUG: kernel NULL pointer dereference, address: 0000000000000008 Workqueue: kblockd blk_mq_timeout_work RIP: 0010:null_timeout_rq+0x4e/0x91 Call Trace: ? null_timeout_rq+0x4e/0x91 blk_mq_handle_expired+0x31/0x4b bt_iter+0x68/0x84 ? bt_tags_iter+0x81/0x81 __sbitmap_for_each_set.constprop.0+0xb0/0xf2 ? __blk_mq_complete_request_remote+0xf/0xf bt_for_each+0x46/0x64 ? __blk_mq_complete_request_remote+0xf/0xf ? percpu_ref_get_many+0xc/0x2a blk_mq_queue_tag_busy_iter+0x14d/0x18e blk_mq_timeout_work+0x95/0x127 process_one_work+0x185/0x263 worker_thread+0x1b5/0x227 This is indeed a race problem between null_timeout_rq() and null_poll(). null_poll() null_timeout_rq() spin_lock(&nq->poll_lock) list_splice_init(&nq->poll_list, &list) spin_unlock(&nq->poll_lock) while (!list_empty(&list)) req = list_first_entry() list_del_init() ... blk_mq_add_to_batch() // req->rq_next = NULL spin_lock(&nq->poll_lock) // rq->queuelist->next == NULL list_del_init(&rq->queuelist) spin_unlock(&nq->poll_lock) Fix these problems by setting requests state to MQ_RQ_COMPLETE under nq->poll_lock protection, in which null_timeout_rq() can safely detect this race and early return. Note this patch just fix the kernel panic when request timeout happen. [1] https://lore.kernel.org/all/3893581.1691785261@warthog.procyon.org.uk/ Fixes: 0a593fbbc245 ("null_blk: poll queue support") Reported-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Link: https://lore.kernel.org/r/20230901120306.170520-2-chengming.zhou@linux.dev Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-30rbd: use list_for_each_entry() helperJinjie Ruan1-3/+1
Convert list_for_each() to list_for_each_entry() so that the tmp list_head pointer and list_entry() call are no longer needed, which can reduce a few lines of code. No functional changed. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-08-30Merge tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linuxLinus Torvalds3-29/+340
Pull block updates from Jens Axboe: "Pretty quiet round for this release. This contains: - Add support for zoned storage to ublk (Andreas, Ming) - Series improving performance for drivers that mark themselves as needing a blocking context for issue (Bart) - Cleanup the flush logic (Chengming) - sed opal keyring support (Greg) - Fixes and improvements to the integrity support (Jinyoung) - Add some exports for bcachefs that we can hopefully delete again in the future (Kent) - deadline throttling fix (Zhiguo) - Series allowing building the kernel without buffer_head support (Christoph) - Sanitize the bio page adding flow (Christoph) - Write back cache fixes (Christoph) - MD updates via Song: - Fix perf regression for raid0 large sequential writes (Jan) - Fix split bio iostat for raid0 (David) - Various raid1 fixes (Heinz, Xueshi) - raid6test build fixes (WANG) - Deprecate bitmap file support (Christoph) - Fix deadlock with md sync thread (Yu) - Refactor md io accounting (Yu) - Various non-urgent fixes (Li, Yu, Jack) - Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li, Ming, Nitesh, Ruan, Tejun, Thomas, Xu)" * tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits) block: use strscpy() to instead of strncpy() block: sed-opal: keyring support for SED keys block: sed-opal: Implement IOC_OPAL_REVERT_LSP block: sed-opal: Implement IOC_OPAL_DISCOVERY blk-mq: prealloc tags when increase tagset nr_hw_queues blk-mq: delete redundant tagset map update when fallback blk-mq: fix tags leak when shrink nr_hw_queues ublk: zoned: support REQ_OP_ZONE_RESET_ALL md: raid0: account for split bio in iostat accounting md/raid0: Fix performance regression for large sequential writes md/raid0: Factor out helper for mapping and submitting a bio md raid1: allow writebehind to work on any leg device set WriteMostly md/raid1: hold the barrier until handle_read_error() finishes md/raid1: free the r1bio before waiting for blocked rdev md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io() blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init drivers/rnbd: restore sysfs interface to rnbd-client md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid() raid6: test: only check for Altivec if building on powerpc hosts raid6: test: make sure all intermediate and artifact files are .gitignored ...
2023-08-29Merge tag 'net-next-6.6' of ↵Linus Torvalds1-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Increase size limits for to-be-sent skb frag allocations. This allows tun, tap devices and packet sockets to better cope with large writes operations - Store netdevs in an xarray, to simplify iterating over netdevs - Refactor nexthop selection for multipath routes - Improve sched class lifetime handling - Add backup nexthop ID support for bridge - Implement drop reasons support in openvswitch - Several data races annotations and fixes - Constify the sk parameter of routing functions - Prepend kernel version to netconsole message Protocols: - Implement support for TCP probing the peer being under memory pressure - Remove hard coded limitation on IPv6 specific info placement inside the socket struct - Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per socket scaling factor - Scaling-up the IPv6 expired route GC via a separated list of expiring routes - In-kernel support for the TLS alert protocol - Better support for UDP reuseport with connected sockets - Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR header size - Get rid of additional ancillary per MPTCP connection struct socket - Implement support for BPF-based MPTCP packet schedulers - Format MPTCP subtests selftests results in TAP - Several new SMC 2.1 features including unique experimental options, max connections per lgr negotiation, max links per lgr negotiation BPF: - Multi-buffer support in AF_XDP - Add multi uprobe BPF links for attaching multiple uprobes and usdt probes, which is significantly faster and saves extra fds - Implement an fd-based tc BPF attach API (TCX) and BPF link support on top of it - Add SO_REUSEPORT support for TC bpf_sk_assign - Support new instructions from cpu v4 to simplify the generated code and feature completeness, for x86, arm64, riscv64 - Support defragmenting IPv(4|6) packets in BPF - Teach verifier actual bounds of bpf_get_smp_processor_id() and fix perf+libbpf issue related to custom section handling - Introduce bpf map element count and enable it for all program types - Add a BPF hook in sys_socket() to change the protocol ID from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy - Introduce bpf_me_mcache_free_rcu() and fix OOM under stress - Add uprobe support for the bpf_get_func_ip helper - Check skb ownership against full socket - Support for up to 12 arguments in BPF trampoline - Extend link_info for kprobe_multi and perf_event links Netfilter: - Speed-up process exit by aborting ruleset validation if a fatal signal is pending - Allow NLA_POLICY_MASK to be used with BE16/BE32 types Driver API: - Page pool optimizations, to improve data locality and cache usage - Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need for raw ioctl() handling in drivers - Simplify genetlink dump operations (doit/dumpit) providing them the common information already populated in struct genl_info - Extend and use the yaml devlink specs to [re]generate the split ops - Introduce devlink selective dumps, to allow SF filtering SF based on handle and other attributes - Add yaml netlink spec for netlink-raw families, allow route, link and address related queries via the ynl tool - Remove phylink legacy mode support - Support offload LED blinking to phy - Add devlink port function attributes for IPsec New hardware / drivers: - Ethernet: - Broadcom ASP 2.0 (72165) ethernet controller - MediaTek MT7988 SoC - Texas Instruments AM654 SoC - Texas Instruments IEP driver - Atheros qca8081 phy - Marvell 88Q2110 phy - NXP TJA1120 phy - WiFi: - MediaTek mt7981 support - Can: - Kvaser SmartFusion2 PCI Express devices - Allwinner T113 controllers - Texas Instruments tcan4552/4553 chips - Bluetooth: - Intel Gale Peak - Qualcomm WCN3988 and WCN7850 - NXP AW693 and IW624 - Mediatek MT2925 Drivers: - Ethernet NICs: - nVidia/Mellanox: - mlx5: - support UDP encapsulation in packet offload mode - IPsec packet offload support in eswitch mode - improve aRFS observability by adding new set of counters - extends MACsec offload support to cover RoCE traffic - dynamic completion EQs - mlx4: - convert to use auxiliary bus instead of custom interface logic - Intel - ice: - implement switchdev bridge offload, even for LAG interfaces - implement SRIOV support for LAG interfaces - igc: - add support for multiple in-flight TX timestamps - Broadcom: - bnxt: - use the unified RX page pool buffers for XDP and non-XDP - use the NAPI skb allocation cache - OcteonTX2: - support Round Robin scheduling HTB offload - TC flower offload support for SPI field - Freescale: - add XDP_TX feature support - AMD: - ionic: add support for PCI FLR event - sfc: - basic conntrack offload - introduce eth, ipv4 and ipv6 pedit offloads - ST Microelectronics: - stmmac: maximze PTP timestamping resolution - Virtual NICs: - Microsoft vNIC: - batch ringing RX queue doorbell on receiving packets - add page pool for RX buffers - Virtio vNIC: - add per queue interrupt coalescing support - Google vNIC: - add queue-page-list mode support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add port range matching tc-flower offload - permit enslavement to netdevices with uppers - Ethernet embedded switches: - Marvell (mv88e6xxx): - convert to phylink_pcs - Renesas: - r8A779fx: add speed change support - rzn1: enables vlan support - Ethernet PHYs: - convert mv88e6xxx to phylink_pcs - WiFi: - Qualcomm Wi-Fi 7 (ath12k): - extremely High Throughput (EHT) PHY support - RealTek (rtl8xxxu): - enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU), RTL8192EU and RTL8723BU - RealTek (rtw89): - Introduce Time Averaged SAR (TAS) support - Connector: - support for event filtering" * tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits) net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler net: stmmac: clarify difference between "interface" and "phy_interface" r8152: add vendor/device ID pair for D-Link DUB-E250 devlink: move devlink_notify_register/unregister() to dev.c devlink: move small_ops definition into netlink.c devlink: move tracepoint definitions into core.c devlink: push linecard related code into separate file devlink: push rate related code into separate file devlink: push trap related code into separate file devlink: use tracepoint_enabled() helper devlink: push region related code into separate file devlink: push param related code into separate file devlink: push resource related code into separate file devlink: push dpipe related code into separate file devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper devlink: push shared buffer related code into separate file devlink: push port related code into separate file devlink: push object register/unregister notifications into separate helpers inet: fix IP_TRANSPARENT error handling ...
2023-08-28Merge tag 'v6.6-vfs.super' of ↵Linus Torvalds4-10/+7
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull superblock updates from Christian Brauner: "This contains the super rework that was ready for this cycle. The first part changes the order of how we open block devices and allocate superblocks, contains various cleanups, simplifications, and a new mechanism to wait on superblock state changes. This unblocks work to ultimately limit the number of writers to a block device. Jan has already scheduled follow-up work that will be ready for v6.7 and allows us to restrict the number of writers to a given block device. That series builds on this work right here. The second part contains filesystem freezing updates. Overview: The generic superblock changes are rougly organized as follows (ignoring additional minor cleanups): (1) Removal of the bd_super member from struct block_device. This was a very odd back pointer to struct super_block with unclear rules. For all relevant places we have other means to get the same information so just get rid of this. (2) Simplify rules for superblock cleanup. Roughly, everything that is allocated during fs_context initialization and that's stored in fs_context->s_fs_info needs to be cleaned up by the fs_context->free() implementation before the superblock allocation function has been called successfully. After sget_fc() returned fs_context->s_fs_info has been transferred to sb->s_fs_info at which point sb->kill_sb() if fully responsible for cleanup. Adhering to these rules means that cleanup of sb->s_fs_info in fill_super() is to be avoided as it's brittle and inconsistent. Cleanup shouldn't be duplicated between sb->put_super() as sb->put_super() is only called if sb->s_root has been set aka when the filesystem has been successfully born (SB_BORN). That complexity should be avoided. This also means that block devices are to be closed in sb->kill_sb() instead of sb->put_super(). More details in the lower section. (3) Make it possible to lookup or create a superblock before opening block devices There's a subtle dependency on (2) as some filesystems did rely on fill_super() to be called in order to correctly clean up sb->s_fs_info. All these filesystems have been fixed. (4) Switch most filesystem to follow the same logic as the generic mount code now does as outlined in (3). (5) Use the superblock as the holder of the block device. We can now easily go back from block device to owning superblock. (6) Export and extend the generic fs_holder_ops and use them as holder ops everywhere and remove the filesystem specific holder ops. (7) Call from the block layer up into the filesystem layer when the block device is removed, allowing to shut down the filesystem without risk of deadlocks. (8) Get rid of get_super(). We can now easily go back from the block device to owning superblock and can call up from the block layer into the filesystem layer when the device is removed. So no need to wade through all registered superblock to find the owning superblock anymore" Link: https://lore.kernel.org/lkml/20230824-prall-intakt-95dbffdee4a0@brauner/ * tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (47 commits) super: use higher-level helper for {freeze,thaw} super: wait until we passed kill super super: wait for nascent superblocks super: make locking naming consistent super: use locking helpers fs: simplify invalidate_inodes fs: remove get_super block: call into the file system for ioctl BLKFLSBUF block: call into the file system for bdev_mark_dead block: consolidate __invalidate_device and fsync_bdev block: drop the "busy inodes on changed media" log message dasd: also call __invalidate_device when setting the device offline amiflop: don't call fsync_bdev in FDFMTBEG floppy: call disk_force_media_change when changing the format block: simplify the disk_force_media_change interface nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl xfs use fs_holder_ops for the log and RT devices xfs: drop s_umount over opening the log and RT devices ext4: use fs_holder_ops for the log device ext4: drop s_umount over opening the log device ...
2023-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Cross-merge networking fixes after downstream PR. Conflicts: include/net/inet_sock.h f866fbc842de ("ipv4: fix data-races around inet->inet_id") c274af224269 ("inet: introduce inet->inet_flags") https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/ Adjacent changes: drivers/net/bonding/bond_alb.c e74216b8def3 ("bonding: fix macvlan over alb bond support") f11e5bd159b0 ("bonding: support balance-alb with openvswitch") drivers/net/ethernet/broadcom/bgmac.c d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()") 23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()") drivers/net/ethernet/broadcom/genet/bcmmii.c 32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()") acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()") net/sctp/socket.c f866fbc842de ("ipv4: fix data-races around inet->inet_id") b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-23Merge tag 'vfs-6.6-merge-2' of ↵Christian Brauner2-30/+20
ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux Pull filesystem freezing updates from Darrick Wong: New code for 6.6: * Allow the kernel to initiate a freeze of a filesystem. The kernel and userspace can both hold a freeze on a filesystem at the same time; the freeze is not lifted until /both/ holders lift it. This will enable us to fix a longstanding bug in XFS online fsck. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Message-Id: <20230822182604.GB11286@frogsfrogsfrogs> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-21amiflop: don't call fsync_bdev in FDFMTBEGChristoph Hellwig1-1/+0
FDFMTBEG is used by fdformat to calibrate before formatting a disk. Neither the atari nor PC floppy driver sync data, which also seems a bit pointless for a disk hat is about to get formatted. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Message-Id: <20230811100828.1897174-11-hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-21floppy: call disk_force_media_change when changing the formatChristoph Hellwig1-1/+1
While changing the format of a floppy isn't strictly speaking a media change, the effects are the same in that the content of the media changes and the diskseq should be increased and uevent should be sent. Switch from calling __invalidate_device to disk_force_media_change to do so. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Message-Id: <20230811100828.1897174-10-hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-21block: simplify the disk_force_media_change interfaceChristoph Hellwig1-3/+3
Hard code the events to DISK_EVENT_MEDIA_CHANGE as that is the only useful use case, and drop the superfluous return value. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Message-Id: <20230811100828.1897174-9-hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-21nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctlChristoph Hellwig1-5/+3
nbd_clear_sock_ioctl kills the socket and with that the block device. Instead of just invalidating file system buffers, mark the device as dead, which will also invalidate the buffers as part of the proper shutdown sequence. This also includes invalidating partitions if there are any. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Message-Id: <20230811100828.1897174-8-hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-21ublk: zoned: support REQ_OP_ZONE_RESET_ALLMing Lei1-2/+5
There isn't any reason to not support REQ_OP_ZONE_RESET_ALL given everything is actually handled in userspace, not mention it is pretty easy to support RESET_ALL. So enable REQ_OP_ZONE_RESET_ALL and let userspace handle it. Verified by 'tools/zbc_reset_zone -all /dev/ublkb0' in libzbc[1] with libublk-rs based ublk-zoned target prototype[2], follows command line for creating ublk-zoned: cargo run --example zoned -- add -1 1024 # add $dev_id $DEV_SIZE [1] https://github.com/westerndigitalcorporation/libzbc [2] https://github.com/ming1/libublk-rs/tree/zoned.v2 Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Damien Le Moal <dlemoal@kernel.org> Cc: Andreas Hindborg <a.hindborg@samsung.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230810124326.321472-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-19Merge tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linuxLinus Torvalds1-1/+1
Pull block fixes from Jens Axboe: "Main thing here is the fix for the regression in flush handling which caused IO hangs/stalls for a few reporters. Hopefully that should all be sorted out now. Outside of that, just a few minor fixes for issues that were introduced in this cycle" * tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux: blk-mq: release scheduler resource when request completes blk-crypto: dynamically allocate fallback profile blk-cgroup: hold queue_lock when removing blkg->q_node drivers/rnbd: restore sysfs interface to rnbd-client
2023-08-19drivers/rnbd: restore sysfs interface to rnbd-clientLi Zhijian1-1/+1
Commit 137380c0ec40 renamed 'rnbd-client' to 'rnbd_client', this changed sysfs interface to /sys/devices/virtual/rnbd_client/ctl/map_device from /sys/devices/virtual/rnbd-client/ctl/map_device. CC: Ivan Orlov <ivan.orlov0322@gmail.com> CC: "Md. Haris Iqbal" <haris.iqbal@ionos.com> CC: Jack Wang <jinpu.wang@ionos.com> Fixes: 137380c0ec40 ("block/rnbd: make all 'class' structures const") Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20230816022210.2501228-1-lizhijian@fujitsu.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-12/+20
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/sfc/tc.c fa165e194997 ("sfc: don't unregister flow_indr if it was never registered") 3bf969e88ada ("sfc: add MAE table machinery for conntrack table") https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>