Age | Commit message (Collapse) | Author | Files | Lines |
|
If firmware loading fails, the controller's pm_state is updated to
MHI_PM_FW_DL_ERR unconditionally. This can corrupt the pm_state as the
update is not done under the proper lock, and also does not validate
the state transition. The firmware loading can fail due to a detected
syserr, but if MHI_PM_FW_DL_ERR is unconditionally set as the pm_state,
the handling of the syserr can break when it attempts to transition from
syserr detect, to syserr process.
By grabbing the lock, we ensure we don't race with some other pm_state
update. By using mhi_try_set_pm_state(), we check that the transition
to MHI_PM_FW_DL_ERR is valid via the state machine logic. If it is not
valid, then some other transition is occurring like syserr processing, and
we assume that will resolve the firmware loading error.
Fixes: 12e050c77be0 ("bus: mhi: core: Move to an error state on any firmware load failure")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1681142292-27571-3-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
If we detect a system error via intvec, we only process the syserr if the
current ee is different than the last observed ee. The reason for this
check is to prevent bhie from running multiple times, but with the single
queue handling syserr, that is not possible.
The check can cause an issue with device recovery. If PBL loads a bad SBL
via BHI, but that SBL hangs before notifying the host of an ee change,
then issuing soc_reset to crash the device and retry (after supplying a
fixed SBL) will not recover the device as the host will observe a PBL->PBL
transition and not process the syserr. The device will be stuck until
either the driver is reloaded, or the host is rebooted. Instead, remove
the check so that we can attempt to recover the device.
Fixes: ef2126c4e2ea ("bus: mhi: core: Process execution environment changes serially")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1681142292-27571-2-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Currently, mhi_process_data_event_ring()/mhi_process_ctrl_ev_ring() APIs
are ringing DB even if there are no ring elements to process. This could
cause the device to process the DB event in the absence of ring elements.
So to avoid this unnecessary device processing, let's ring event DB only
if there are any ring elements to process.
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1680601458-9105-1-git-send-email-quic_vpernami@quicinc.com
[mani: massaged the commit message a bit]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The Foxconn T99W510 device is designed based on Qualcomm
SDX24. Add 3 variants for different potential customer.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20230329072239.93632-1-slark_xiao@163.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
If the BHIOFF or BHIEOFF range checks fail, they return EINVAL. ERANGE
is a better error code since it implies an out of range condition.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1679674860-28229-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
If the value read from the CHDBOFF and ERDBOFF registers is outside the
range of the MHI register space then an invalid address might be computed
which later causes a kernel panic. Range check the read value to prevent
a crash due to bad data from the device.
Fixes: 6cd330ae76ff ("bus: mhi: core: Add support for ringing channel/event ring doorbells")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1679674384-27209-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
This reverts commit 2d5253a096c6057bbf7caa5520856dcdf7eca8bb.
There are 2 commits with commit message "Add a secondary AT port to Telit
FN990":
commit 2d5253a096c6 ("bus: mhi: host: pci_generic: Add a secondary AT port
to Telit FN990")
commit 479aa3b0ec2e ("bus: mhi: host: pci_generic: Add a secondary AT port
to Telit FN990")
This turned out to be due to the patch getting applied through different
trees and git settled on a resolution while applying it second time. But
the second AT port of Foxconn devices don't work in PCIe mode. So the
second commit needs to be reverted.
Cc: stable@vger.kernel.org # 6.2
Fixes: 2d5253a096c6 ("bus: mhi: host: pci_generic: Add a secondary AT port to Telit FN990")
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20230310101715.69209-1-slark_xiao@163.com
[mani: massaged the commit message a bit, added fixes tag and CCed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since commit <f26e58bf6f54> ("PCI/AER: Enable error reporting
when AER is native"), the PCI core does this for all devices during
enumeration, so the driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230307201625.879567-1-helgaas@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Not all MHI endpoints will support all available channels. Most of them
support only a selected number of channels based on the implementations.
In those cases, it is not needed to print error messages in the endpoint.
So let's demote the error log to debug.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
mhi_poll() API is not used within the MHI stack and also not by any client
drivers in mainline. So let's remove it until any consumer is available.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
|
|
The > comparison should be changed to >= to prevent an out of bounds
access into the mhi_cntrl->mhi_chan[] array. The mhi_cntrl->mhi_chan[]
array is allocated in mhi_ep_chan_init() and has mhi_cntrl->max_chan
elements.
Fixes: 6de4941c0215 ("bus: mhi: ep: Check if the channel is supported by the controller")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/Y9JH5sudiZWvbODv@kili
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
state_lock, the spinlock type is meant to protect race against concurrent
MHI state transitions. In mhi_ep_set_m0_state(), while the state_lock is
being held, the channels are resumed in mhi_ep_resume_channels() if the
previous state was M3. This causes sleeping in atomic bug, since
mhi_ep_resume_channels() use mutex internally.
Since the state_lock is supposed to be held throughout the state change,
it is not ideal to drop the lock before calling mhi_ep_resume_channels().
So to fix this issue, let's change the type of state_lock to mutex. This
would also allow holding the lock throughout all state transitions thereby
avoiding any potential race.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: e4b7b5f0f30a ("bus: mhi: ep: Add support for suspending and resuming channels")
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
During suspend and resume, the channel state needs to be saved locally.
Otherwise, the endpoint may access the channels while they were being
suspended and causing access violations.
Fix it by saving the channel state locally during suspend and resume.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: e4b7b5f0f30a ("bus: mhi: ep: Add support for suspending and resuming channels")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com)
Link: https://lore.kernel.org/r/20221228161704.255268-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
There is a good chance that while the channel ring gets processed, the STOP
or RESET command for the channel might be received from the MHI host. In
those cases, the entire channel ring processing needs to be protected by
chan->lock to prevent the race where the corresponding channel ring might
be reset.
While at it, let's also add a sanity check to make sure that the ring is
started before processing it. Because, if the STOP/RESET command gets
processed while mhi_ep_ch_ring_worker() waited for chan->lock, the ring
would've been reset.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: 03c0bb8ec983 ("bus: mhi: ep: Add support for processing channel rings")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The debug log incorrectly mentions that STOP command is received instead of
RESET command. Fix that.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
For the STOP and RESET commands, only send the channel disconnect status
-ENOTCONN if client driver is available. Otherwise, it will result in
null pointer dereference.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: e827569062a8 ("bus: mhi: ep: Add support for processing command rings")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Before processing the command ring for the channel, check if the channel is
supported by the controller or not.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
During graceful shutdown scenario, host will issue MHI RESET to the
endpoint device before initiating shutdown. In that case, it makes sense
to completely power down the MHI stack as sooner or later the access to
MMIO registers will be prohibited. Also, the stack needs to be powered
up in the case of SYS_ERR to recover the device.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
This should be a mistake. MHI contains "Host Interface"
already. So we shall update "MHI" to "Modem" and the full
name shall be "Modem Host Interface".
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20221229011358.15874-1-slark_xiao@163.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Makefile was always suggesting to build subdirectories regardless of
Kconfig. Use the Kconfig flags as intended.
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221207192613.2098614-1-quic_carlv@quicinc.com
[mani: fixed the subject prefix]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc and other driver subsystem changes
for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of
new driver development and minor fixes.
Highlights include:
- fastrpc driver updates
- iio new drivers and updates
- habanalabs driver updates for new hardware and features
- slimbus driver updates
- speakup module parameters added to aid in boot time configuration
- i2c probe_new conversions for lots of different drivers
- other small driver fixes and additions
One semi-interesting change in here is the increase of the number of
misc dynamic minors available to 1048448 to handle new huge-cpu
systems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits)
extcon: usbc-tusb320: Convert to i2c's .probe_new()
extcon: rt8973: Convert to i2c's .probe_new()
extcon: fsa9480: Convert to i2c's .probe_new()
extcon: max77843: Replace irqchip mask_invert with unmask_base
chardev: fix error handling in cdev_device_add()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
drivers: mcb: fix resource leak in mcb_probe()
coresight: etm4x: fix repeated words in comments
coresight: cti: Fix null pointer error on CTI init before ETM
coresight: trbe: remove cpuhp instance node before remove cpuhp state
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
misc: fastrpc: Add dma_mask to fastrpc_channel_ctx
misc: fastrpc: Add mmap request assigning for static PD pool
misc: fastrpc: Safekeep mmaps on interrupted invoke
misc: fastrpc: Add support for audiopd
misc: fastrpc: Rework fastrpc_req_munmap
misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail
misc: fastrpc: Add fastrpc_remote_heap_alloc
misc: fastrpc: Add reserved mem support
misc: fastrpc: Rename audio protection domain to root
...
|
|
These cases were done with this Coccinelle:
@@
expression H;
expression L;
@@
- (get_random_u32_below(H) + L)
+ get_random_u32_inclusive(L, H + L - 1)
@@
expression H;
expression L;
expression E;
@@
get_random_u32_inclusive(L,
H
- + E
- - E
)
@@
expression H;
expression L;
expression E;
@@
get_random_u32_inclusive(L,
H
- - E
- + E
)
@@
expression H;
expression L;
expression E;
expression F;
@@
get_random_u32_inclusive(L,
H
- - E
+ F
- + E
)
@@
expression H;
expression L;
expression E;
expression F;
@@
get_random_u32_inclusive(L,
H
- + E
+ F
- - E
)
And then subsequently cleaned up by hand, with several automatic cases
rejected if it didn't make sense contextually.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This is a simple mechanical transformation done by:
@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
To make code neat and for convenience purpose, add definition for some
VIDs. Adding it locally until these VIDs are used in multiple places.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20221107112700.773-1-slark_xiao@163.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The Foxconn T99W175 modem has an HP variant, which has
the following output from lspci:
01:00.0 Wireless controller [0d40]: Device 03f0:0a6c
It also has some HP-specific serial numbers on the
metal case. It works well with this driver, so add
support for this to the pci_generic driver.
Signed-off-by: Song Fuchang <song.fc@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
[mani: manually applied the patch]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The SC8280XP Compute Reference Design (CRD) has an on-PCB SDX55 modem
which uses MBIM.
The exact channel configuration is not known but the Foxconn SDX55
configuration allows the modem to be used so reuse that one for now.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20221104093913.23347-1-johan+linaro@kernel.org
[mani: modified the subject to format "bus: mhi: host"]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add a secondary AT port using one of OEM reserved channel.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220916144329.243368-3-fabio.porcedda@gmail.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
There is a race condition where mhi_prepare_channel() updates the
read and write pointers as the base address and in parallel, if
an M0 transition occurs, the tasklet goes ahead and rings
doorbells for all channels with a delta in TRE rings assuming
they are already enabled. This causes a null pointer access. Fix
it by adding a channel enabled check before ringing channel
doorbells.
Cc: stable@vger.kernel.org # 5.19
Fixes: a6e2e3522f29 "bus: mhi: core: Add support for PM state transitions"
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1665889532-13634-1-git-send-email-quic_qianyu@quicinc.com
[mani: CCed stable list]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Currently, a direct register write is used when ramdump collection
in panic path occurs. Replace that with new mhi_soc_reset() API
such that a controller defined reset() function is exercised if
one is present and the regular SOC reset is done if it is not.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1665376324-34258-1-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
"MHI Host
--------
- Print the modem name while probing the MHI host pci-generic driver. This has
been exposed as a debug information so far but on a low storate embedded
devices such as OpenWRT based products, this helps in identifying the
attached modem without enabling the debug logs."
* tag 'mhi-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: always print detected modem name
|
|
Add a secondary AT port using one of OEM reserved channel.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This harmless print provides a very easy way of knowing
if the modem is detected properly during probing.
Promote it to an informational print so no hassle is required
enabling kernel debugging info to obtain it.
The rationale here is that:
On a lot of low-storage embedded devices, extensive kernel
debugging info is not always present as this would
increase it's size to much causing partition size issues.
Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20220831100349.1488762-1-koen.vandeputte@citymesh.com
[mani: added missing review tags]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The irq handler for a shared IRQ ought to be prepared for running
even now it's being freed. So let's check the pointer used by
mhi_irq_handler to avoid null pointer access since it is probably
released before freeing IRQ.
Fixes: 1227d2a20cd7 ("bus: mhi: host: Move IRQ allocation to controller registration phase")
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1658459838-30802-1-git-send-email-quic_qianyu@quicinc.com
[mani: added fixes tag]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
It's possible that dev_set_name() returns -ENOMEM, catch and handle this.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220708015948.4091-1-liubo03@inspur.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The Foxconn e0c3 device identifies itself as a T99W175 X55, add support
for this to the pci_generic driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220627170717.2252335-1-bjorn.andersson@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
During runtime, the MHI endpoint may be powered up/down several times.
So instead of allocating and destroying the IRQs all the time, let's just
enable/disable IRQs during power up/down.
The IRQs will be allocated during mhi_register_controller() and freed
during mhi_unregister_controller(). This works well for things like PCI
hotplug also as once the PCI device gets removed, the controller will
get unregistered. And once it comes back, it will get registered back
and even if the IRQ configuration changes (MSI), that will get accounted.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1655952183-66792-1-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Cinterion MV31-W modem with a new baseline (firmware) is sold as a separate
product with different device ID. So add support for the same reusing the
config.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220622032544.17713-1-slark_xiao@163.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The product's enumeration align with previous Quectel EM120R-GL, so the
EM120 FCCL would use the same config as Quectel EM120R-GL.
Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/MEYP282MB2374837FFCB18B12BFDEDE80FDCF9@MEYP282MB2374.AUSP282.PROD.OUTLOOK.COM
[mani: added pci_generic prefix to subject and aligned the commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-work-next
Manivannan writes:
MHI changes for v5.19
MHI Host
--------
Support for new modems:
- Foxconn Cinterion MV32-WA/MV32-WB based on SDX62/SDX65
- Telit FN980 v1 based on SDX55
- Telit FN990 based on SDX65
- Foxconn T99W373/T99W368 based on SDX62/SDX65
Core changes:
- During the recycle of event ring elements, compute the ctxt_wp based on the
local cached value instead of reading from shared memory. This is to prevent
the possible corruption of the ctxt_wp as some of the endpoint devices could
modify the value in shared memory.
- Add sysfs support for resetting the endpoint based on the MHI spec. The MHI
spec allows the host to hard reset the device in the case of an unrecoverable
error and all other reset mechanisms have failed.
- During MHI shutdown, wait for the endpoint device to enter the ready state
post reset before proceeding. This is to avoid a possible race where host
would remove the interrupt handler and device will send ready state
interrupt, resulting in IOMMU fault.
- Bail out updating the MHI register if the read has failed during
read/modify/write.
- Use mhi_write_reg() instead of mhi_write_reg_field() for writing the whole
register fields in mhi_init_mmio().
MAINTAINERS change:
- Since Qualcomm has moved the email domain for its employess from codeaurora
domain to quicinc, update the same for Hemant.
* tag 'mhi-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: (29 commits)
bus: mhi: host: Add support for Foxconn T99W373 and T99W368
bus: mhi: host: pci_generic: add Telit FN990
bus: mhi: host: pci_generic: add Telit FN980 v1 hardware revision
bus: mhi: host: Add support for Cinterion MV32-WA/MV32-WB
bus: mhi: host: Optimize and update MMIO register write method
bus: mhi: host: Bail on writing register fields if read fails
bus: mhi: host: Wait for ready state after reset
bus: mhi: host: Add soc_reset sysfs
bus: mhi: host: pci_generic: Sort mhi_pci_id_table based on the PID
bus: mhi: host: Use cached values for calculating the shared write pointer
MAINTAINERS: Update Hemant's email id
bus: mhi: ep: Add uevent support for module autoloading
bus: mhi: ep: Add support for suspending and resuming channels
bus: mhi: ep: Add support for queueing SKBs to the host
bus: mhi: ep: Add support for processing channel rings
bus: mhi: ep: Add support for reading from the host
bus: mhi: ep: Add support for processing command rings
bus: mhi: ep: Add support for handling SYS_ERR condition
bus: mhi: ep: Add support for handling MHI_RESET
bus: mhi: ep: Add support for powering down the MHI endpoint stack
...
|
|
Product's enumeration align with previous Foxconn
SDX55, so T99W373(SDX62)/T99W368(SDX65) would use
the same config as Foxconn SDX55.
Remove fw and edl for this new commit.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20220503024349.4486-1-slark_xiao@163.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add Telit FN990:
01:00.0 Unassigned class [ff00]: Qualcomm Device 0308
Subsystem: Device 1c5d:2010
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220502112036.443618-1-dnlplm@gmail.com
[mani: Added "host" to the subject]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add Telit FN980 v1 hardware revision:
01:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:0306]
Subsystem: Device [1c5d:2000]
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220427072648.17635-1-dnlplm@gmail.com
[mani: Added "host" to the subject]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Fix following coccicheck warning:
./drivers/bus/mhi/host/init.c:89:8-16: WARNING: use scnprintf or sprintf
Use sysfs_emit and sysfs_emit_at instead of snprintf.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20220426125902.681258-1-wanjiabing@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add uevent support to MHI endpoint bus so that the client drivers can be
autoloaded by udev when the MHI endpoint devices gets created. The client
drivers are expected to provide MODULE_DEVICE_TABLE with the MHI id_table
struct so that the alias can be exported.
The MHI endpoint reused the mhi_device_id structure of the MHI bus.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-19-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for suspending and resuming the channels in MHI endpoint stack.
The channels will be moved to the suspended state during M3 state
transition and will be resumed during M0 transition.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-18-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for queueing SKBs to the host over the transfer ring of the
relevant channel. The mhi_ep_queue_skb() API will be used by the client
networking drivers to queue the SKBs to the host over MHI bus.
The host will add ring elements to the transfer ring periodically for
the device and the device will write SKBs to the ring elements. If a
single SKB doesn't fit in a ring element (TRE), it will be placed in
multiple ring elements and the overflow event will be sent for all ring
elements except the last one. For the last ring element, the EOT event
will be sent indicating the packet boundary.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-17-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|