summaryrefslogtreecommitdiff
path: root/drivers/clk/bcm
AgeCommit message (Collapse)AuthorFilesLines
2022-05-28Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Mainly driver updates this time around. There's a single patch to the core clk framework that simplifies a runtime PM call. Otherwise the majority of the diff falls to a few SoC drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new hardware support and what comes along with that is quite a few lines of data and some clk_ops code. Beyond the new hardware support we have the usual pile of driver updates that add missing clks on already supported SoCs or fix up problems like bad clk tree descriptions. It's nice to see that more drivers are moving to clk_hw based APIs too. New Drivers: - Add STM32MP13 RCC driver (Reset Clock Controller) - MediaTek MT8186 SoC clk support - Airoha EN7523 SoC system clocks - Clock driver for exynosautov9 SoC - Renesas R-Car V4H and RZ/V2M SoCs - Renesas RZ/G2UL SoC - LPASS clk driver for Qualcomm sc7280 SoC - GCC clk driver for Qualcomm SC8280XP SoC Updates: - SDCC uses floor clk ops on Qualcomm MSM8976 - Add modem reset and fix RPM clks on Qualcomm MSM8976 - Add the two missing CLKOUT clocks for U8500/DB8500 SoC - Mark some clks critical on Ingenic X1000 - Convert ux500 to clk_hw - Move MediaTek driver to clk_hw provider APIs - Use i2c driver probe_new to avoid id scans - Convert a number of Rockchip dt bindings to YAML - Mark hclk_vo critical on Rockchip rk3568 - Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage - Various cleanups like memory allocation error checks and plugged leaks - Allwinner H6 RTC clock support - Allwinner H616 32 kHz clock support - Add the Universal Flash Storage clock on Renesas R-Car S4-8 - Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas RZ/G2UL - Add display clock support on Renesas RZ/G2L - Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3 - Add 27 MHz phy PLL ref clock on i.MX - Add mcore_booted module parameter to tell kernel M core has already booted for i.MX - Remove snvs clock on i.MX because it was for secure world only - Add dt bindings for i.MX8MN GPT - Add DISP2 pixel clock for i.MX8MP - Add clkout1/2 for i.MX8MP - Fix parent clock of ubs_root_clk for i.MX8MP - Implement better RCG parking on Qualcomm SoCs using the shared RCG clk ops - Kerneldoc fixes - Switch Tegra BPMP to determine_rate clk op - Add a pointer to dt schema for generic clock bindings" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits) Revert "clk: qcom: regmap-mux: add pipe clk implementation" Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc() clk: stm32mp13: add safe mux management clk: stm32mp13: add multi mux function clk: stm32mp13: add all STM32MP13 kernel clocks clk: stm32mp13: add all STM32MP13 peripheral clocks clk: stm32mp13: manage secured clocks clk: stm32mp13: add composite clock clk: stm32mp13: add stm32 divider clock clk: stm32mp13: add stm32_gate management clk: stm32mp13: add stm32_mux clock management clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller) dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC clk: ti: clkctrl: replace usage of found with dedicated list iterator variable clk: ti: composite: Prefer kcalloc over open coded arithmetic dt-bindings: clock: exynosautov9: correct count of NR_CLK clk: mediatek: mt8173: Switch to clk_hw provider APIs clk: mediatek: Switch to clk_hw provider APIs ...
2022-05-21clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()Christophe JAILLET1-1/+1
We should have 'n', then 'size', not the opposite. This is harmless because the 2 values are just multiplied, but having the correct order silence a (unpublished yet) smatch warning. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/49d726d11964ca0e3757bdb5659e3b3eaa1572b5.1653081643.git.christophe.jaillet@wanadoo.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-17clk: bcm2835: fix bcm2835_clock_choose_divStefan Wahren1-0/+1
The commit 09e3b18ca5de ("clk: bcm2835: Remove unused variable") accidentially breaks the behavior of bcm2835_clock_choose_div() and booting of Raspberry Pi. The removed do_div macro call had side effects, so we need to restore it. Fixes: 09e3b18ca5de ("clk: bcm2835: Remove unused variable") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220428183010.1635248-1-stefan.wahren@i2se.com Tested-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-29Merge branches 'clk-range', 'clk-uniphier', 'clk-apple' and 'clk-qcom' into ↵Stephen Boyd1-17/+110
clk-next - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range - Support for NCO blocks on Apple SoCs * clk-range: clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate clk: bcm: rpi: Run some clocks at the minimum rate allowed clk: bcm: rpi: Set a default minimum rate clk: bcm: rpi: Add variant structure clk: Add clk_drop_range clk: Always set the rate on clk_set_range_rate clk: Use clamp instead of open-coding our own clk: Always clamp the rounded rate clk: Enforce that disjoints limits are invalid clk: Introduce Kunit Tests for the framework clk: Fix clk_hw_get_clk() when dev is NULL * clk-uniphier: clk: uniphier: Fix fixed-rate initialization * clk-apple: clk: clk-apple-nco: Allow and fix module building MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE clk: clk-apple-nco: Add driver for Apple NCO dt-bindings: clock: Add Apple NCO * clk-qcom: (61 commits) clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: qcom: Add display clock controller driver for SM6125 dt-bindings: clock: add QCOM SM6125 display clock bindings clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig clk: qcom: gcc: Add emac GDSC support for SM8150 clk: qcom: gcc: sm8150: Fix some identation issues clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 clk: qcom: clk-rcg2: Update the frac table for pixel clock clk: qcom: clk-rcg2: Update logic to calculate D value for RCG clk: qcom: smd: Add missing MSM8998 RPM clocks clk: qcom: smd: Add missing RPM clocks for msm8992/4 dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks clk: qcom: gcc-ipq806x: add CryptoEngine resets dt-bindings: reset: add ipq8064 ce5 resets clk: qcom: gcc-ipq806x: add CryptoEngine clocks dt-bindings: clock: add ipq8064 ce5 clk define clk: qcom: gcc-ipq806x: add additional freq for sdc table clk: qcom: clk-rcg: add clk_rcg_floor_ops ops ...
2022-03-12clk: bcm2835: Remove unused variableMaxime Ripard1-2/+0
Since commit 8ca011ef4af4 ("clk: bcm-2835: Remove rounding up the dividers"), the rem variable is still set but no longer used. Remove it. Fixes: 8ca011ef4af4 ("clk: bcm-2835: Remove rounding up the dividers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220222140732.253819-1-maxime@cerno.tech Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-12clk: bcm: rpi: Run some clocks at the minimum rate allowedMaxime Ripard1-0/+37
The core clock and M2MC clocks are shared between some devices (Unicam controllers and the HVS, and the HDMI controllers, respectively) that will have various, varying, requirements depending on their current work load. Since those loads can require a fairly high clock rate in extreme conditions (up to ~600MHz), we can end up running those clocks at their maximum frequency even though we no longer require such a high rate. Fortunately, those devices don't require an exact rate but a minimum rate, and all the drivers are using clk_set_min_rate. Thus, we can just rely on the fact that the clk_request minimum (which is the aggregated minimum of all the clock users) is what we want at all times. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-11-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-12clk: bcm: rpi: Set a default minimum rateMaxime Ripard1-0/+26
The M2MC clock provides the state machine clock for both HDMI controllers. However, if no HDMI monitor is plugged in at boot, its clock rate will be left at 0 by the firmware and will make any register access end up in a CPU stall, even though the clock was enabled. We had some code in the HDMI controller to deal with this before, but it makes more sense to have it in the clock driver. Move it there. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-10-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-12clk: bcm: rpi: Add variant structureMaxime Ripard1-17/+47
We only export a bunch of firmware clocks, and some of them require special treatment. This has been do so far using some tests on the clock id in various places, but this is fairly hard to extend and doesn't scale very well. Since we'll need some more cases in the next patches, let's switch to a variant structure that defines the behaviour we need to have for a given clock. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-9-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-12clk: cleanup commentsTom Rix2-2/+2
For spdx Space instead of tab before spdx tag Removed repeated works the, to, two Replacements much much to a much 'to to' to 'to do' aready to already Comunications to Communications freqency to frequency Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220222195153.3817625-1-trix@redhat.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-25clk: bcm-2835: Remove rounding up the dividersMaxime Ripard1-8/+3
The driver, once it found a divider, tries to round it up by increasing the least significant bit of the fractional part by one when the round_up argument is set and there's a remainder. However, since it increases the divider it will actually reduce the clock rate below what we were asking for, leading to issues with clk_set_min_rate() that will complain that our rounded clock rate is below the minimum of the rate. Since the dividers are fairly precise already, let's remove that part so that we can have clk_set_min_rate() working. This is effectively a revert of 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor"). Fixes: 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality Tested-by: Michael Stapelberg <michael@stapelberg.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech
2021-10-25clk: bcm-2835: Pick the closest clock rateMaxime Ripard1-1/+1
The driver currently tries to pick the closest rate that is lower than the rate being requested. This causes an issue with clk_set_min_rate() since it actively checks for the rounded rate to be above the minimum that was just set. Let's change the logic a bit to pick the closest rate to the requested rate, no matter if it's actually higher or lower. Fixes: 6d18b8adbe67 ("clk: bcm2835: Support for clock parent selection") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality Tested-by: Michael Stapelberg <michael@stapelberg.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-2-maxime@cerno.tech
2021-08-06clk: bcm2835: Switch to clk_divider.determine_rateMartin Blumenstingl1-5/+4
.determine_rate is meant to replace .round_rate in CCF in the future. Switch over to .determine_rate now that clk_divider_ops has gained support for that. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-rpi-kernel@lists.infradead.org Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210702225145.2643303-4-martin.blumenstingl@googlemail.com Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-03-22clk: bcm: rpi: Release firmware handle on unbindNicolas Saenz Julienne1-1/+1
Use devm_rpi_firmware_get() so as to make sure we release RPi's firmware interface when unbinding the device. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> drivers/clk/bcm/clk-raspberrypi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
2021-02-11clk: bcm: clk-iproc-pll: Demote kernel-doc abuseLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/clk/bcm/clk-iproc-pll.c:712: warning: Function parameter or member 'pll' not described in 'iproc_pll_sw_cfg' Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-6-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: bcm: dvp: Add MODULE_DEVICE_TABLE()Nicolas Saenz Julienne1-0/+1
Add MODULE_DEVICE_TABLE() so as to be able to use the driver as a module. More precisely, for the driver to be loaded automatically at boot. Fixes: 1bc95972715a ("clk: bcm: Add BCM2711 DVP driver") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20201202103518.21889-1-nsaenzjulienne@suse.de Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: bcm: dvp: drop a variable that is assigned to onlyUwe Kleine-König1-2/+1
The third parameter to devm_platform_get_and_ioremap_resource() is used only to provide the used resource. As this variable isn't used afterwards, switch to the function devm_platform_ioremap_resource() which doesn't provide this output parameter. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201120132121.2678997-1-u.kleine-koenig@pengutronix.de Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-22Merge tag 'clk-for-linus' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This contains no changes to the core framework. It is a collection of various clk driver updates. The biggest driver updates in terms of lines of code is the Allwinner driver, closely followed by the Qualcomm and Mediatek drivers. All of those hit high because we add so many lines of clk data. Coming in fourth place is i.MX which also adds a bunch of clk data. This accounts for the new driver additions this time around. Otherwise the patches are lots of little cleanups and fixes for various clk drivers that have baked in linux-next for a while. I suppose one highlight or theme is that more clk drivers are being updated to work as modules, which is interesting to see such critical SoC infrastructure work as a loadable module. New Drivers: - Support qcom SM8150/SM8250 video and display clks - Support Mediatek MT8167 clks - Add clock for CRC block found on vf610 SoCs - Add support for the Renesas R-Car V3U (R8A779A0) SoC - Add support for the VSP for Resizing clock on Renesas RZ/G1H - Support Allwinner A100 SoC clks Removed Drivers: - Remove i.MX21 clock driver, as i.MX21 platform support is being dropped Updates: - Change how qcom's display port clks work - Small non-critical fixes for TI clk driver - Remove various unused variables in clk drivers - Allow Rockchip clk driver to be a module - Remove most __clk_lookup() calls in Samsung drivers (yay!) - Support building i.MX ARMv8 platforms clock driver as module - Some kerneldoc fixes here and there - A couple of minor i.MX clk data corrections - Update audio clock inverter and fdiv2 flag on Amlogic g12 - Make amlogic clk drivers configurable in Kconfig - Fix Renesas VSP clock names to match corrected hardware documentation - Sigma-delta modulation on Allwinner R40 - Various fixes for at91 clk driver - Use semicolons instead of commas in some places - Mark some variables const so they can move to RO memory" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits) clk: imx8mq: Fix usdhc parents order clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: Restrict CLK_HSDK to ARC_SOC_HSDK clk: at91: sam9x60: support only two programmable clocks clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks clk: bcm2835: add missing release if devm_clk_hw_register fails clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name clk: clk-prima2: fix return value check in prima2_clk_init() clk: mmp2: Fix the display clock divider base clk: pxa: Constify static struct clk_ops clk: baikal-t1: Mark Ethernet PLL as critical clk: qoriq: modify MAX_PLL_DIV to 32 clk: axi-clkgen: Set power bits for fractional mode clk: axi-clkgen: Add support for fractional dividers ...
2020-10-14clk: bcm2835: add missing release if devm_clk_hw_register failsNavid Emamdoost1-1/+3
In the implementation of bcm2835_register_pll(), the allocated pll is leaked if devm_clk_hw_register() fails to register hw. Release pll if devm_clk_hw_register() fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20200809231202.15811-1-navid.emamdoost@gmail.com Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22clk: bcm: rpi: Add register to control pixel bvb clkHoegeun Kwon1-0/+1
To use QHD or higher, we need to modify the pixel_bvb_clk value. So add register to control this clock. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Link: https://lore.kernel.org/r/20200901040759.29992-2-hoegeun.kwon@samsung.com Reviewed-by: Maxime Ripard <mripard@kernel.org> Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-10clk: bcm: dvp: Select the reset frameworkMaxime Ripard1-0/+1
The DVP driver depends both on the RESET_SIMPLE driver but also on the reset framework itself. Let's make sure we have it enabled. Fixes: 1bc95972715a ("clk: bcm: Add BCM2711 DVP driver") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200903082636.3844629-1-maxime@cerno.tech Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-08-04Merge branches 'clk-actions', 'clk-rockchip', 'clk-iproc', 'clk-intel' and ↵Stephen Boyd1-2/+2
'clk-debugfs' into clk-next - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs * clk-actions: MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs clk: actions: Add Actions S500 SoC Reset Management Unit support dt-bindings: reset: Add binding constants for Actions S500 RMU clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC clk: actions: Fix h_clk for Actions S500 SoC * clk-rockchip: clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocks clk: rockchip: Revert "fix wrong mmc sample phase shift for rk3328" clk: rockchip: use separate compatibles for rk3288w-cru dt-bindings: clocks: add rk3288w variant compatible clk: rockchip: Handle clock tree for rk3288w variant clk: rockchip: convert rk3036 pll type to use internal lock status clk: rockchip: convert basic pll lock_wait to use regmap_read_poll_timeout clk: rockchip: convert rk3399 pll type to use readl_relaxed_poll_timeout * clk-iproc: clk: iproc: round clock rate to the closest * clk-intel: clk: intel: Avoid unnecessary memset by improving code clk: intel: Improve locking in the driver clk: intel: Use devm_clk_hw_register() instead of clk_hw_register() * clk-debugfs: clk: Add support for enabling/disabling clocks from debugfs
2020-08-04clk: bcm2835: Do not use prediv with bcm2711's PLLsNicolas Saenz Julienne1-4/+21
Contrary to previous SoCs, bcm2711 doesn't have a prescaler in the PLL feedback loop. Bypass it by zeroing fb_prediv_mask when running on bcm2711. Note that, since the prediv configuration bits were re-purposed, this was triggering miscalculations on all clocks hanging from the VPU clock, notably the aux UART, making its output unintelligible. Fixes: 42de9ad400af ("clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20200730182619.23246-1-nsaenzjulienne@suse.de Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: iproc: round clock rate to the closestLori Hikichi1-2/+2
Change from 'DIV_ROUND_UP' to 'DIV_ROUND_CLOSEST' when calculating the clock divisor in the iProc ASIU clock driver to allow to get to the closest clock rate. Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support") Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Link: https://lore.kernel.org/r/20200612225212.124301-1-ray.jui@broadcom.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-26clk: bcm: dvp: Add missing module informationsMaxime Ripard1-0/+4
The driver for the DVP controller in the BCM2711 was missing the MODULE_* macros resulting in a modpost warning at compilation. Fixes: 1bc95972715a ("clk: bcm: Add BCM2711 DVP driver") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200626112513.90816-1-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Remove the quirks for the CPU clockMaxime Ripard1-164/+0
The CPU clock has had so far a bunch of quirks to expose the clock tree properly, but since we reverted to exposing them through the MMIO driver, we can remove that code from the firmware driver. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/acdf820c2f78a25dd7480a0c018b8b387acd013e.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm2835: Don't cache the PLLB rateMaxime Ripard1-2/+3
The PLLB rate will be changed through the firmware clocks drivers and will change behind this drivers' back, so we don't want to cache the rate. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/9864daba2f584ed49aee5ed1d2f4d48507c58197.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm2835: Allow custom CCF flags for the PLLsMaxime Ripard1-1/+2
While some clock types allow for each clock to specify its own custom flags, the PLLs can't. We will need this for the PLLB, so let's add it. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/ae8bd505d8851f6646e244cd76b6b289346973c8.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20Revert "clk: bcm2835: remove pllb"Maxime Ripard1-4/+26
This reverts commit 2256d89333bd17b8b56b42734a7e1046d52f7fc3. Since we will be expanding the firmware clock driver, we'll need to remove the quirks to deal with the PLLB. However, we still want to expose the clock tree properly, so having that clock in the MMIO driver will allow that. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/5d26a4c58248f5be7760a7f2f720a1310baea5dd.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Give firmware clocks a nameMaxime Ripard1-1/+20
We've registered the firmware clocks using their ID as name, but it's much more convenient to register them using their proper name. Since the firmware doesn't provide it, we have to duplicate it. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/a52a5f5768cd33716cdd35237c6613f26ad75013.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Discover the firmware clocksMaxime Ripard1-12/+141
The RaspberryPi4 firmware actually exposes more clocks than are currently handled by the driver and we will need to change some of them directly based on the pixel rate for the display related clocks, or the load for the GPU. Since the firmware implements DVFS, this rate change can have a number of side-effects, including adjusting the various PLL voltages or the PLL parents. The firmware also implements thermal throttling, so even some thermal pressure can change those parameters behind Linux back. DVFS is currently implemented on the arm, core, h264, v3d, isp and hevc clocks, so updating any of them using the MMIO driver (and thus behind the firmware's back) can lead to troubles, the arm clock obviously being the most problematic. In order to make Linux play as nice as possible with those constraints, it makes sense to rely on the firmware clocks as much as possible. However, the firmware doesn't seem to provide some equivalents to their MMIO counterparts, so we can't really replace that driver entirely. Fortunately, the firmware has an interface to discover the clocks it exposes. Let's use it to discover, register the clocks in the clocks framework and then expose them through the device tree for consumers to use them. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/438d73962741a8c5f7c689319b7443b930a87fde.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Add an enum for the firmware clocksMaxime Ripard1-4/+19
While the firmware allows us to discover the available clocks, we need to discriminate those clocks to only register the ones meaningful to Linux. The firmware also doesn't provide a clock name, so having a list of the ID will help us to give clocks a proper name later on. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/4738f77ee7de9b48a3bb1c558ead958d0cc064d9.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Add DT provider for the clocksMaxime Ripard1-0/+16
For the upcoming registration of the clocks provided by the firmware, make sure it's exposed to the device tree providers. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/4d8dbe4aaae98b3d3812ad7c3dba53d645cadbaf.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Make the PLLB registration function return a clk_hwMaxime Ripard1-22/+24
The raspberrypi_register_pllb has been returning an integer so far to notify whether the functions has exited successfully or not. However, the OF provider functions in the clock framework require access to the clk_hw structure so that we can expose those clocks to device tree consumers. Since we'll want that for the future clocks, let's return a clk_hw pointer instead of the return code. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/97218559db643e62fdd2b5e3046a2a05b8c2e769.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Split pllb clock hooksMaxime Ripard1-8/+22
The driver only supports the pllb for now and all the clock framework hooks are a mix of the generic firmware interface and the specifics of the pllb. Since we will support more clocks in the future let's split the generic and specific hooks Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/fdc21962fdc7de5c46232f198672d5d5c868ec74.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Rename is_prepared functionMaxime Ripard1-2/+2
The raspberrypi_fw_pll_is_on function doesn't only apply to PLL registered in the driver, but any clock exposed by the firmware. Since we also implement the is_prepared hook, make the function consistent with the other function names. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/ac93cc4e245316bb7e7426ac5ab0de8f3d919731.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Pass the clocks data to the firmware functionMaxime Ripard1-15/+14
The raspberry_clock_property only takes the clock ID as an argument, but now that we have a clock data structure it makes more sense to just pass that structure instead. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/d7a3b4df3ca23feb6e0d9c7ae2d232bfb913f926.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Add clock id to dataMaxime Ripard1-9/+9
The driver has really only supported one clock so far and has hardcoded the ID used in communications with the firmware in all the functions implementing the clock framework hooks. Let's store that in the clock data structure so that we can support more clocks later on. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/e23c37961b97b027e21efa3b818578970f88527a.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Create a data structure for the clocksMaxime Ripard1-10/+21
So far the driver has really only been providing a single clock, and stored both the data associated to that clock in particular with the data associated to the "controller". Since we will change that in the future, let's decouple the clock data from the provider data. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/ee7f508db226214fab4add7f93a351f4137c86a1.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Use CCF boundaries instead of rolling our ownMaxime Ripard1-10/+8
The raspberrypi firmware clock driver has a min_rate / max_rate clamping by storing the info it needs in a private structure. However, the CCF already provides such a facility, so we can switch to it to remove the boilerplate. Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/d4c53dab6de5d5f70743d9c139d0117589530e62.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Make sure the clkdev lookup is removedMaxime Ripard1-2/+3
The clkdev lookup created for the cpufreq device is never removed if there's an issue later in probe or at module removal time. Let's convert to the managed variant of the clk_hw_register_clkdev function to make sure it happens. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/075e2c6d315eccdaf8fb72b320712b86e6c25b22.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Switch to clk_hw_register_clkdevMaxime Ripard1-6/+5
Since we don't care about retrieving the clk_lookup structure pointer returned by clkdev_hw_create, we can just use the clk_hw_register_clkdev function. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/59f6208b6fe3367e735b0cca4f65c2c937639af9.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Remove pllb_arm_lookup global pointerMaxime Ripard1-4/+4
The pllb_arm_lookup pointer in the struct raspberrypi_clk is not used for anything but to store the returned pointer to clkdev_hw_create, and is not used anywhere else in the driver. Let's remove that global pointer from the structure. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/189407f54906d2b07c91de7a4eeb6d8c8934280f.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Make sure pllb_arm is removedMaxime Ripard1-2/+1
The pllb_arm clock was created at probe time, but was never removed if something went wrong later in probe, or if the driver was ever removed from the system. Now that we are using clk_hw_register(), we can just use its managed variant to take care of that for us. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/34254ed1556614658e5dad5cca4cf4fe617df7fc.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Remove global pllb_arm clock pointerMaxime Ripard1-4/+3
The pllb_arm clk_hw pointer in the raspberry_clk structure isn't used anywhere but in the raspberrypi_register_pllb_arm. Let's remove it, this will make our lives easier in future patches. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/842859cf1a77478620f45049178a588448202858.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Use clk_hw_register for pllb_armMaxime Ripard1-6/+18
The pllb_arm clock is defined as a fixed factor clock with the pllb clock as a parent. However, all its configuration is entirely static, and thus we don't really need to call clk_hw_register_fixed_factor() but can simply call clk_hw_register() with a static clk_fixed_factor structure. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/1146177664999eeda65856d28ce94025021dd85e.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Statically init clk_init_dataMaxime Ripard1-2/+1
Instead of declaring the clk_init_data and then calling memset on it, just initialise properly. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/0342572daa561dc1bb4c9fd10641b2016493e32b.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: rpi: Allow the driver to be probed by DTMaxime Ripard1-2/+17
The current firmware clock driver for the RaspberryPi can only be probed by manually registering an associated platform_device. While this works fine for cpufreq where the device gets attached a clkdev lookup, it would be tedious to maintain a table of all the devices using one of the clocks exposed by the firmware. Since the DT on the other hand is the perfect place to store those associations, make the firmware clocks driver probe-able through the device tree so that we can represent it as a node. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/cb8203b862e386ac6c3df3eff0bb5a238b6ec97a.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm: Add BCM2711 DVP driverMaxime Ripard3-0/+132
The HDMI block has a block that controls clocks and reset signals to the HDMI0 and HDMI1 controllers. Let's expose that through a clock driver implementing a clock and reset provider. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-clk@vger.kernel.org Cc: devicetree@vger.kernel.org Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/bb60d97fc76b61c2eabef5a02ebd664c0f57ede0.1591867332.git-series.maxime@cerno.tech Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm63xx-gate: switch to dt-bindings definitionsÁlvaro Fernández Rojas1-141/+439
Now that there are header files for each SoC, let's use them in the bcm63xx-gate controller driver. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20200615090231.2932696-9-noltari@gmail.com Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-20clk: bcm63xx-gate: add BCM6318 supportÁlvaro Fernández Rojas1-0/+44
Add support for the gated clock controllers found on the BCM6318. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200610140858.207329-3-noltari@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-09 05:21:11 +0300