summaryrefslogtreecommitdiff
path: root/drivers/clk/samsung
AgeCommit message (Collapse)AuthorFilesLines
2022-05-10clk: samsung: exynosautov9: add cmu_peric1 clock supportChanho Park1-0/+254
Like CMU_PERIC0, this provides clocks for USI06 ~ USI11 and USI_I2C. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20220504075154.58819-10-chanho61.park@samsung.com
2022-05-10clk: samsung: exynosautov9: add cmu_peric0 clock supportChanho Park1-0/+254
CMU_PERIC0 provides clocks for USI0 ~ USI5 and USIx_I2C. USI0/1/2/3/4/5 have its own divider but USI_I2Cs share "dout_peric0_usi_i2c" divider. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220504075154.58819-9-chanho61.park@samsung.com
2022-05-10clk: samsung: exynosautov9: add cmu_fsys2 clock supportChanho Park1-0/+69
CMU_FSYS2 is responsible to control clocks of BLK_FSYS2 which includes ufs and ethernet IPs. This patch adds some essential clocks to be controlled by ethernet/ufs drivers instead of listing full clocks. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20220504075154.58819-8-chanho61.park@samsung.com
2022-05-10clk: samsung: exynosautov9: add cmu_busmc clock supportChanho Park1-0/+55
CMU_BUSMC is responsible to control clocks of BLK_BUSMC which represents Data/Peri buses. Most clocks except PDMA/SPDMA are not necessary to be controlled by HLOS. So, this adds PDMA/SPDMA gate clocks. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20220504075154.58819-7-chanho61.park@samsung.com
2022-05-10clk: samsung: exynosautov9: add cmu_peris clock supportChanho Park1-0/+51
CMU_PERIS is responsible to control clocks of BLK_PERIS which has OPT/MCT/WDT and TMU. This patch only supports WDT gate clocks and all other clocks except WDT will be supported later. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20220504075154.58819-6-chanho61.park@samsung.com
2022-05-10clk: samsung: exynosautov9: add cmu_core clock supportChanho Park1-0/+92
Add CMU_CORE clock which represents Core BUS clocks. The source clocks of this CMU block are oscclk or dout_clkcmu_core_bus. Thus, two source clocks should be provided via device tree. All the gate clocks are defined as CLK_IS_CRITICAL because they control(gate/ungate) core bus clocks but not been assigned to any drivers. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20220504075154.58819-5-chanho61.park@samsung.com
2022-05-10clk: samsung: add top clock support for Exynos Auto v9 SoCChanho Park2-0/+959
This adds support for CMU_TOP which generates clocks for all the function blocks such as CORE, FSYS0/1/2, PERIC0/1 and so on. For CMU_TOP, PLL_SHARED0,1,2,3 and 4 will be the sources of this block and they will generate bus clocks. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20220504075154.58819-4-chanho61.park@samsung.com
2022-02-01clk: samsung: fix missing Tesla FSD dependency on ExynosKrzysztof Kozlowski1-0/+1
The Tesla FSD clock controller driver uses shared parts from Exynos ARM64 clock drivers, so add proper dependency to fix COMPILE_TEST build errors like: /usr/bin/aarch64-linux-gnu-ld: drivers/clk/samsung/clk-fsd.o: in function `fsd_cmu_probe': clk-fsd.c:(.init.text+0x9c): undefined reference to `exynos_arm64_register_cmu' Reported-by: kernel test robot <lkp@intel.com> Fixes: e3f3dc3810d3 ("clk: samsung: fsd: Add cmu_peric block clock information") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220129173407.278591-1-krzysztof.kozlowski@canonical.com
2022-01-26clk: samsung: fsd: Add cam_csi block clock informationAlim Akhtar1-0/+207
Adds clocks for BLK_CAM_CSI block, this is needed for CSI to work. Cc: linux-fsd@tesla.com Signed-off-by: Sathyakam M <sathya@samsung.com> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20220124141644.71052-11-alim.akhtar@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2022-01-26clk: samsung: fsd: Add cmu_mfc block clock informationAlim Akhtar1-0/+121
Adds cmu_mfc clock related code, these clocks are required for MFC IP. Cc: linux-fsd@tesla.com Signed-off-by: Smitha T Murthy <smitha.t@samsung.com> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20220124141644.71052-10-alim.akhtar@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2022-01-26clk: samsung: fsd: Add cmu_imem block clock informationAlim Akhtar1-0/+283
Adds cmu_imem clock related code, imem block contains IPs like WDT, DMA, TMU etc, these clocks are required for such IP function. Cc: linux-fsd@tesla.com Signed-off-by: Arjun K V <arjun.kv@samsung.com> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Tauseef Nomani <tauseef.n@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20220124141644.71052-9-alim.akhtar@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2022-01-26clk: samsung: fsd: Add cmu_fsys1 clock informationAlim Akhtar1-0/+175
Adds cmu_fsys1 block clock information which are needed for PCIe IPs in block FSYS1. Cc: linux-fsd@tesla.com Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20220124141644.71052-8-alim.akhtar@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2022-01-26clk: samsung: fsd: Add cmu_fsys0 clock informationAlim Akhtar1-0/+302
CMU_FSYS0 block has IPs like UFS, EQOS, PCIe etc, lets add the related clock information for the same. Cc: linux-fsd@tesla.com Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Shradha Todi <shradha.t@samsung.com> Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20220124141644.71052-7-alim.akhtar@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2022-01-26clk: samsung: fsd: Add cmu_peric block clock informationAlim Akhtar1-0/+405
Add CMU_PERIC block clock information needed for various IPs functions found in this block. Cc: linux-fsd@tesla.com Signed-off-by: Aswani Reddy <aswani.reddy@samsung.com> Signed-off-by: Niyas Ahmed S T <niyas.ahmed@samsung.com> Signed-off-by: Chandrasekar R <rcsekar@samsung.com> Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com> Signed-off-by: Sriranjani P <sriranjani.p@samsung.com> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20220124141644.71052-6-alim.akhtar@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2022-01-26clk: samsung: fsd: Add initial clock supportAlim Akhtar5-0/+321
Add initial clock support for FSD (Full Self-Driving) SoC which is required to bring-up platforms based on this SoC. Cc: linux-fsd@tesla.com Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20220124141644.71052-5-alim.akhtar@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-12-20clk: samsung: Add initial Exynos7885 clock driverDavid Virag2-0/+598
This is an initial implementation adding basic clocks, such as UART, USI, I2C, WDT, ect. and their parent clocks. It is heavily based on the Exynos850 clock driver at 'drivers/clk/samsung/clk-exynos850.c' which was made by Sam Protsenko, thus the copyright and author lines were kept. Bus clocks are enabled by default as well to avoid hangs while trying to access CMU registers. Only the parts of CMU_TOP needed for CMU_CORE and CMU_PERI, a bit of CMU_CORE, and most of CMU_PERI is implemented as of now. Signed-off-by: David Virag <virag.david003@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211206153124.427102-7-virag.david003@gmail.com
2021-12-20clk: samsung: clk-pll: Add support for pll1417xDavid Virag2-0/+2
pll1417x is used in Exynos7885 SoC for top-level integer PLLs. It is similar enough to pll0822x that practically the same code can handle both. The difference that's to be noted is that when defining a pl1417x PLL, the "con" parameter of the PLL macro should be set to the CON1 register instead of CON3, like this: PLL(pll_1417x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk", PLL_LOCKTIME_PLL_SHARED0, PLL_CON0_PLL_SHARED0, NULL), Signed-off-by: David Virag <virag.david003@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20211206153124.427102-6-virag.david003@gmail.com
2021-12-20clk: samsung: Make exynos850_register_cmu sharedDavid Virag4-84/+119
Rename exynos850_register_cmu to exynos_arm64_register_cmu and move it to a new file called "clk-exynos-arm64.c". This should have no functional changes, but it will allow this code to be shared between other arm64 Exynos SoCs, like the Exynos7885 and possibly ExynosAuto V9. Signed-off-by: David Virag <virag.david003@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211206153124.427102-5-virag.david003@gmail.com
2021-12-20clk: samsung: exynos850: Add missing sysreg clocksSam Protsenko1-0/+29
System Register is used to configure system behavior, like USI protocol, etc. SYSREG clocks should be provided to corresponding syscon nodes, to make it possible to modify SYSREG registers. While at it, add also missing PMU and GPIO clocks, which looks necessary and might be needed for corresponding Exynos850 features soon. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211217161549.24836-3-semen.protsenko@linaro.org
2021-11-23clk: samsung: exynos850: Register clocks earlySam Protsenko1-21/+49
Some clocks must be registered before init calls. For example MCT clock (from CMU_PERI) is needed for MCT timer driver, which is registered with TIMER_OF_DECLARE(). By the time we get to core_initcall() used for clk-exynos850 platform driver init, it's already too late. Inability to get "mct" clock in MCT driver leads to kernel panic, as functions registered with *_OF_DECLARE() can't do deferred calls. MCT timer driver can't be fixed either, as it's acting as a clock source and it's essential to register it in start_kernel() -> time_init(). Let's register CMU_PERI clocks early, using CLK_OF_DECLARE(). CMU_TOP generates clocks needed for CMU_PERI, but it's already registered early. While at it, let's cleanup the code a bit, by extracting everything related to CMU initialization and registration to the separate function. Similar issue was discussed at [1] and addressed in commit 1f7db7bbf031 ("clk: renesas: cpg-mssr: Add early clock support"), as well as in drivers/clk/mediatek/clk-mt2712.c. [1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20180829132954.64862-2-chris.brandt@renesas.com/ Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211122144206.23134-1-semen.protsenko@linaro.org
2021-11-22clk: samsung: exynos850: Keep some crucial clocks runningSam Protsenko1-6/+13
Some clocks shouldn't be automatically disabled in clk_disable_unused(), otherwise kernel hangs. Mark those clocks with: - CLK_IS_CRITICAL flag, when there won't be any consumers for that clock, but system can't function when it's gated - CLK_IGNORE_UNUSED flag, when consumer driver will be probably added later That makes it possible to run the kernel without passing the "clk_ignore_unused" param. Next clocks were modified: - "gout_dpu_cmu_dpu_pclk": CLK_IGNORE_UNUSED Will be enabled later in DSIM driver (Display Serial Interface Master). - "gout_gpio_peri_pclk": CLK_IGNORE_UNUSED "gout_gpio_cmgp_pclk": CLK_IGNORE_UNUSED "gout_gpio_hsi_pclk": CLK_IGNORE_UNUSED Should be probably enabled in corresponding GPIO driver later, or made CLK_IS_CRITICAL. "gout_gpio_peri_clk" is actually used by LEDs on Exynos850-based dev board, so kernel hangs if this clock is not running. Other clocks were marked as "ignore unused" to prevent similar issues for other use cases or boards that might be added later. - "gout_cci_aclk": CLK_IS_CRITICAL CCI (Cache Coherent Interconnect): obviously is critical. - "gout_gic_clk": CLK_IS_CRITICAL GIC (Generic Interrupt Controller): obviously is critical. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211121232741.6967-7-semen.protsenko@linaro.org
2021-11-22clk: samsung: exynos850: Implement CMU_CMGP domainSam Protsenko1-0/+100
CMU_CMGP clock domain provides clocks for CMGP IP-core (Common GPIO). CMGP module encapsulates next blocks: - 8 GPIO lines - 1 GPADC - 2 USI blocks, each can be configured to provide one of UART/SPI/HSI2C serial interfaces Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211121232741.6967-5-semen.protsenko@linaro.org
2021-11-22clk: samsung: exynos850: Implement CMU_APM domainSam Protsenko1-1/+141
CMU_APM clock domain provides clocks for APM IP-core (Active Power Management). According to Exynos850 TRM, CMU_APM generates I3C, Mailbox, Speedy, Timer, WDT, RTC and PMU clocks for BLK_ALIVE. This patch adds next clocks: - bus clocks in CMU_TOP needed for CMU_APM - all internal CMU_APM clocks - leaf clocks for I3C, Speedy and RTC IP-cores - bus clocks for CMU_CMGP and CMU_CHUB CMU_APM doesn't belong to Power Domains, but platform driver is used for its registration to keep its bus clock always running. Otherwise rtc-s3c driver disables that clock and system freezes. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211121232741.6967-3-semen.protsenko@linaro.org
2021-11-20clk: samsung: Update CPU clk registrationWill McVicker6-57/+67
Convert the remaining exynos clock drivers to use samsung_clk_register_cpu() or if possible use samsung_cmu_register_one(). With this we can now make exynos_register_cpu_clock() a static function so that future CPU clock registration changes will use the samsung common clock driver. The main benefit of this change is that it standardizes the CPU clock registration for the samsung clock drivers. Link: https://lore.kernel.org/r/20211015190515.3760577-1-willmcvicker@google.com Signed-off-by: Will McVicker <willmcvicker@google.com> Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> [snawrocki@kernel.org: Fixed build break in clk-exynos4.c, clk-exynos5250.c] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-11-19clk: samsung: Remove meaningless __init and extern from header filesSylwester Nawrocki2-18/+18
Remove useless __init atrribute and unneeded extern qualifier in function declarations in header files. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20211015151425.29743-1-s.nawrocki@samsung.com
2021-11-19clk: samsung: remove __clk_lookup() usageMarek Szyprowski8-36/+32
__clk_lookup() interface is obsolete, so remove it from the Samsung clock drivers. This has been achieved by getting rid of custom _get_rate() helper and replacing it with clk_hw_get_rate(). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211018125456.8292-2-m.szyprowski@samsung.com Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-10-18clk: samsung: describe drivers in KconfigKrzysztof Kozlowski1-10/+20
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20210924133624.112593-1-krzysztof.kozlowski@canonical.com Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-10-15clk: samsung: exynos5433: update apollo and atlas clock probingWill McVicker1-72/+48
Use the samsung common clk driver to initialize the apollo and atlas clocks. This removes their custom init functions and uses the samsung_cmu_register_one() instead. Signed-off-by: Will McVicker <willmcvicker@google.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211014195347.3635601-3-willmcvicker@google.com Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-10-15clk: samsung: add support for CPU clocksWill McVicker3-0/+46
Adds 'struct samsung_cpu_clock' and corresponding CPU clock registration function to the samsung common clk driver. This allows samsung clock drivers to register their CPU clocks with the samsung_cmu_register_one() API. Currently the exynos5433 apollo and atlas clks have their own custom init functions to handle registering their CPU clocks. With this patch we can drop their custom CLK_OF_DECLARE functions and directly call samsung_cmu_register_one(). Signed-off-by: Will McVicker <willmcvicker@google.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211014195347.3635601-2-willmcvicker@google.com Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-10-15clk: samsung: Introduce Exynos850 clock driverSam Protsenko2-0/+836
This is the initial implementation adding only basic clocks like UART, MMC, I2C and corresponding parent clocks. Design is influenced by Exynos5433 clock driver. Bus clock is enabled by default (in probe function) for all CMUs except CMU_TOP, the reasoning is as follows. By default if bus clock has no users its "enable count" value is 0. It might be actually running if it's already enabled in bootloader, but then in some cases it can be disabled by mistake. For example, such case was observed when dw_mci_probe() enabled the bus clock, then failed to do something and disabled that bus clock on error path. After that, even the attempt to read the 'clk_summary' file in DebugFS freezed forever, as CMU bus clock ended up being disabled and it wasn't possible to access CMU registers anymore. To avoid such cases, CMU driver must increment the ref count for that bus clock by running clk_prepare_enable(). There is already existing '.clk_name' field in struct samsung_cmu_info, exactly for that reason. It was added in commit 523d3de41f02 ("clk: samsung: exynos5433: Add support for runtime PM"), with next mentioning in commit message: > Also for each CMU there is one special parent clock, which has to be > enabled all the time when any access to CMU registers is being done. But that clock is actually only enabled in Exynos5433 clock driver right now. So the same code is added to exynos850_cmu_probe() function, As was described above, it might be helpful not only for PM reasons, but also to prevent possible erroneous clock gating on error paths. Another way to workaround that issue would be to use CLOCK_IS_CRITICAL flag for corresponding gate clocks. But that might be not very good design decision, as we might still want to disable that bus clock, e.g. on PM suspend. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211008154352.19519-6-semen.protsenko@linaro.org Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-10-09clk: samsung: clk-pll: Implement pll0831x PLL typeSam Protsenko2-0/+106
pll0831x PLL is used in Exynos850 SoC for top-level fractional PLLs. The code was derived from very similar pll36xx type, with next differences: 1. Lock time for pll0831x is 500*P_DIV, when for pll36xx it's 3000*P_DIV 2. It's not suggested in Exynos850 TRM that S_DIV change doesn't require performing PLL lock procedure (which is done in pll36xx implementation) 3. The offset from PMS-values register to K-value register is 0x8 for pll0831x, when for pll36xx it's 0x4 When defining pll0831x type, CON3 register offset should be provided as a "con" parameter of PLL() macro, like this: PLL(pll_0831x, 0, "fout_mmc_pll", "oscclk", PLL_LOCKTIME_PLL_MMC, PLL_CON3_PLL_MMC, pll0831x_26mhz_tbl), To define PLL rates table, one can use PLL_36XX_RATE() macro, e.g.: PLL_36XX_RATE(26 * MHZ, 799999877, 31, 1, 0, -15124) as it's completely appropriate for pl0831x type and there is no sense in duplicating that. If bit #1 (MANUAL_PLL_CTRL) is not set in CON1 register, it won't be possible to set new rate, with next error showing in kernel log: Could not lock PLL fout_mmc_pll That can happen for example if bootloader clears that bit beforehand. PLL driver doesn't account for that, so if MANUAL_PLL_CTRL bit was cleared, it's assumed it was done for a reason and it shouldn't be possible to change that PLL's rate at all. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211008154352.19519-3-semen.protsenko@linaro.org Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-10-09clk: samsung: clk-pll: Implement pll0822x PLL typeSam Protsenko2-0/+92
pll0822x PLL is used in Exynos850 SoC for top-level integer PLLs. The code was derived from very similar pll35xx type, with next differences: 1. Lock time for pll0822x is 150*P_DIV, when for pll35xx it's 270*P_DIV 2. It's not suggested in Exynos850 TRM that S_DIV change doesn't require performing PLL lock procedure (which is done in pll35xx implementation) When defining pll0822x type, CON3 register offset should be provided as a "con" parameter of PLL() macro, like this: PLL(pll_0822x, 0, "fout_shared0_pll", "oscclk", PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0, exynos850_shared0_pll_rates), To define PLL rates table, one can use PLL_35XX_RATE() macro, e.g.: PLL_35XX_RATE(26 * MHZ, 1600 * MHZ, 800, 13, 0) as it's completely appropriate for pl0822x type and there is no sense in duplicating that. If bit #1 (MANUAL_PLL_CTRL) is not set in CON1 register, it won't be possible to set new rate, with next error showing in kernel log: Could not lock PLL fout_shared1_pll That can happen for example if bootloader clears that bit beforehand. PLL driver doesn't account for that, so if MANUAL_PLL_CTRL bit was cleared, it's assumed it was done for a reason and it shouldn't be possible to change that PLL's rate at all. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211008154352.19519-2-semen.protsenko@linaro.org Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-09-13clk: samsung: s5pv210-audss: Make use of devm_platform_ioremap_resource()Cai Huoqing1-3/+1
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210907085122.4305-1-caihuoqing@baidu.com
2021-09-13clk: samsung: exynos5433: Make use of devm_platform_ioremap_resource()Cai Huoqing1-3/+1
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210907085115.4254-1-caihuoqing@baidu.com
2021-09-13clk: samsung: exynos4412-isp: Make use of devm_platform_ioremap_resource()Cai Huoqing1-3/+1
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210907085107.4203-1-caihuoqing@baidu.com
2021-09-13clk: samsung: exynos-audss: Make use of devm_platform_ioremap_resource()Cai Huoqing1-3/+1
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210907085100.4152-1-caihuoqing@baidu.com
2021-04-08clk: samsung: Remove redundant dev_err callsChen Hui2-6/+2
There is error message within devm_ioremap_resource already, so remove the dev_err calls to avoid redundant error messages. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Chen Hui <clare.chenhui@huawei.com> Link: https://lore.kernel.org/linux-clk/20210408134856.207305-1-clare.chenhui@huawei.com Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-04-07clk: exynos7: Mark aclk_fsys1_200 as criticalPaweł Chmiel1-1/+6
This clock must be always enabled to allow access to any registers in fsys1 CMU. Until proper solution based on runtime PM is applied (similar to what was done for Exynos5433), mark that clock as critical so it won't be disabled. It was observed on Samsung Galaxy S6 device (based on Exynos7420), where UFS module is probed before pmic used to power that device. In this case defer probe was happening and that clock was disabled by UFS driver, causing whole boot to hang on next CMU access. Fixes: 753195a749a6 ("clk: samsung: exynos7: Correct CMU_FSYS1 clocks names") Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/linux-clk/20201024154346.9589-1-pawel.mikolaj.chmiel@gmail.com [s.nawrocki: Added comment in the code] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-12-21Merge tag 'clk-for-linus' of ↵Linus Torvalds3-89/+147
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework got some nice improvements this time around. We gained the ability to get struct clk pointers from a struct clk_hw so that clk providers can consume the clks they provide, if they need to do something like that. This has been a long missing part of the clk provider API that will help us move away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are added for the clk_set_rate() "range" functions, similar to the tracepoints we already have for clk_set_rate() and we added a column to debugfs to help developers understand the hardware enable state of clks in case firmware or bootloader state is different than what is expected. Overall the core changes are mostly improving the clk driver writing experience. At the driver level, we have the usual collection of driver updates and new drivers for new SoCs. This time around the Qualcomm folks introduced a good handful of clk drivers for various parts of three or four SoCs. The SiFive folks added a new clk driver for their FU740 SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that for various new features. One last thing to note in the driver area is that the i.MX driver has gained a new binding to support SCU clks after being on the list for many months. It uses a two cell binding which is sort of rare in clk DT bindings. Beyond that we have the usual set of driver fixes and tweaks that come from more testing and finding out that some configuration was wrong or that a driver could support being built as a module. Summary: Core: - Add some trace points for clk_set_rate() "range" functions - Add hardware enable information to clk_summary debugfs - Replace clk-provider.h with of_clk.h when possible - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw New Drivers: - Bindings for Canaan K210 SoC clks - Support for SiFive FU740 PRCI - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs Updates: - DVFS support for AT91 clk driver - Update git repo branch for Renesas clock drivers - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E - Stop using __raw_*() I/O accessors in Renesas clk drivers - One more conversion of DT bindings to json-schema - Make i.MX clk-gate2 driver more flexible - New two cell binding for i.MX SCU clks - Drop of_match_ptr() in i.MX8 clk drivers - Add arch dependencies for Rockchip clk drivers - Fix i2s on Rockchip rk3066 - Add MIPI DSI clks on Amlogic axg and g12 SoCs - Support modular builds of Amlogic clk drivers - Fix an Amlogic Video PLL clock dependency - Samsung Kconfig dependencies updates for better compile test coverage - Refactoring of the Samsung PLL clocks driver - Small Tegra driver cleanups - Minor fixes to Ingenic and VC5 clk drivers - Cleanup patches to remove unused variables and plug memory leaks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" clk: ingenic: Fix divider calculation with div tables clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 clk: si5351: Wait for bit clear after PLL reset clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error ...
2020-12-05clk: samsung: mark PM functions as __maybe_unusedArnd Bergmann1-2/+2
The use of SIMPLE_DEV_PM_OPS() means that the suspend/resume functions are now unused when CONFIG_PM is disabled: drivers/clk/samsung/clk-exynos-clkout.c:219:12: error: 'exynos_clkout_resume' defined but not used [-Werror=unused-function] 219 | static int exynos_clkout_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~ drivers/clk/samsung/clk-exynos-clkout.c:210:12: error: 'exynos_clkout_suspend' defined but not used [-Werror=unused-function] 210 | static int exynos_clkout_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~ Mark them as __maybe_unused to shut up the otherwise harmless warning. Fixes: 9484f2cb8332 ("clk: samsung: exynos-clkout: convert to module driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201204091616.4128366-1-arnd@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-23clk: samsung: Prevent potential endless loop in the PLL opsSylwester Nawrocki1-76/+71
The PLL status polling loops in the set_rate callbacks of some PLLs have no timeout detection and may become endless loops when something goes wrong with the PLL. For some PLLs there is already the ktime API based timeout detection, but it will not work in all conditions when .set_rate gets called. In particular, before the clocksource is initialized or when the timekeeping is suspended. This patch adds a common helper with the PLL status bit polling and timeout detection. For conditions where the timekeeping API should not be used a simple readl_relaxed/cpu_relax() busy loop is added with the iterations limit derived from measurements of readl_relaxed() execution time for various PLL types and Exynos SoCs variants. Actual PLL lock time depends on the P divider value, the VCO frequency and a constant PLL type specific LOCK_FACTOR and can be calculated as lock_time = Pdiv * LOCK_FACTOR / VCO_freq For the ktime API use cases a common timeout value of 20 ms is applied for all the PLLs with an assumption that maximum possible value of Pdiv is 64, maximum possible LOCK_FACTOR value is 3000 and minimum VCO frequency is 24 MHz. Link: https://lore.kernel.org/r/20201120155731.26898-1-s.nawrocki@samsung.com Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-11-23clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210Krzysztof Kozlowski2-13/+76
So far all Exynos, S3C64xx and S5Pv210 clock units were selected by respective SOC/ARCH Kconfig option. On a kernel built for selected SoCs, this allowed to build only limited set of matching clock drivers. However compile testing was not possible in such case as Makefile object depends on SOC/ARCH option. Add separate Kconfig options for each of them to be able to compile test. Link: https://lore.kernel.org/r/20201119164509.754851-1-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-11-12clk: samsung: allow building the clkout driver as moduleKrzysztof Kozlowski3-1/+12
The Exynos clock output driver can be built as module (it does not have to be part of core init process) for better customization. Adding a KConfig entry allows also compile testing for build coverage. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201110193749.261367-1-krzk@kernel.org
2020-10-29clk: samsung: exynos-clkout: convert to module driverKrzysztof Kozlowski1-57/+141
The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds5-6/+13
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-22Merge tag 'clk-for-linus' of ↵Linus Torvalds7-46/+55
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This contains no changes to the core framework. It is a collection of various clk driver updates. The biggest driver updates in terms of lines of code is the Allwinner driver, closely followed by the Qualcomm and Mediatek drivers. All of those hit high because we add so many lines of clk data. Coming in fourth place is i.MX which also adds a bunch of clk data. This accounts for the new driver additions this time around. Otherwise the patches are lots of little cleanups and fixes for various clk drivers that have baked in linux-next for a while. I suppose one highlight or theme is that more clk drivers are being updated to work as modules, which is interesting to see such critical SoC infrastructure work as a loadable module. New Drivers: - Support qcom SM8150/SM8250 video and display clks - Support Mediatek MT8167 clks - Add clock for CRC block found on vf610 SoCs - Add support for the Renesas R-Car V3U (R8A779A0) SoC - Add support for the VSP for Resizing clock on Renesas RZ/G1H - Support Allwinner A100 SoC clks Removed Drivers: - Remove i.MX21 clock driver, as i.MX21 platform support is being dropped Updates: - Change how qcom's display port clks work - Small non-critical fixes for TI clk driver - Remove various unused variables in clk drivers - Allow Rockchip clk driver to be a module - Remove most __clk_lookup() calls in Samsung drivers (yay!) - Support building i.MX ARMv8 platforms clock driver as module - Some kerneldoc fixes here and there - A couple of minor i.MX clk data corrections - Update audio clock inverter and fdiv2 flag on Amlogic g12 - Make amlogic clk drivers configurable in Kconfig - Fix Renesas VSP clock names to match corrected hardware documentation - Sigma-delta modulation on Allwinner R40 - Various fixes for at91 clk driver - Use semicolons instead of commas in some places - Mark some variables const so they can move to RO memory" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits) clk: imx8mq: Fix usdhc parents order clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: Restrict CLK_HSDK to ARC_SOC_HSDK clk: at91: sam9x60: support only two programmable clocks clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks clk: bcm2835: add missing release if devm_clk_hw_register fails clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name clk: clk-prima2: fix return value check in prima2_clk_init() clk: mmp2: Fix the display clock divider base clk: pxa: Constify static struct clk_ops clk: baikal-t1: Mark Ethernet PLL as critical clk: qoriq: modify MAX_PLL_DIV to 32 clk: axi-clkgen: Set power bits for fractional mode clk: axi-clkgen: Add support for fractional dividers ...
2020-09-22clk: samsung: exynos4: mark 'chipid' clock as CLK_IGNORE_UNUSEDMarek Szyprowski1-2/+2
The ChipID IO region has it's own clock, which is being disabled while scanning for unused clocks. It turned out that some CPU hotplug, CPU idle or even SOC firmware code depends on the reads from that area. Fix the mysterious hang caused by entering deep CPU idle state by ignoring the 'chipid' clock during unused clocks scan, as there are no direct clients for it which will keep it enabled. Fixes: e062b571777f ("clk: exynos4: register clocks using common clock framework") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200922124046.10496-1-m.szyprowski@samsung.com Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-17clk: samsung: Use cached clk_hws instead of __clk_lookup() callsSylwester Nawrocki7-36/+42
For the CPU clock registration two parent clocks are required, these are now being passed as struct clk_hw pointers, rather than by the global scope names. That allows us to avoid __clk_lookup() calls and simplifies a bit the CPU clock registration function. While at it drop unneeded extern keyword in the function declaration. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20200826171529.23618-3-s.nawrocki@samsung.com Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-09-17clk: samsung: exynos5420/5250: Add IDs to the CPU parent clk definitionsSylwester Nawrocki2-7/+8
Use non-zero clock IDs in definitions of the CPU parent clocks for exynos5420, exynos5250 SoCs. This will allow us to reference the parent clocks directly in the driver by cached struct clk_hw pointers, rather than doing clk lookup by name. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20200826171529.23618-2-s.nawrocki@samsung.com Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-09-17clk: samsung: exynos5420: Avoid __clk_lookup() calls when enabling clocksSylwester Nawrocki1-4/+6
This patch adds a clk ID to the mout_sw_aclk_g3d clk definition so related clk pointer gets cached in the driver's private data and can be used later instead of a __clk_lookup() call. With that we have all clocks used in the clk_prepare_enable() calls in the clk provider init callback cached in clk_data.hws[] and we can reference the clk pointers directly rather than using __clk_lookup() with global names. Link: https://lore.kernel.org/r/20200811151251.31613-2-s.nawrocki@samsung.com Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-09 02:50:50 +0300