summaryrefslogtreecommitdiff
path: root/drivers/clk/sunxi-ng/ccu_nkm.c
AgeCommit message (Collapse)AuthorFilesLines
2024-04-16clk: sunxi-ng: nkm: Support constraints on m/n ratio and parent rateFrank Oltmanns1-0/+21
The Allwinner A64 manual lists the following constraints for the PLL-MIPI clock: - M/N <= 3 - (PLL_VIDEO0)/M >= 24MHz The PLL-MIPI clock is implemented as ccu_nkm. Therefore, add support for these constraints. Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-3-46fc80c83637@oltmanns.dev Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-11-19clk: sunxi-ng: nkm: remove redundant initialization of tmp_parentColin Ian King1-3/+2
Variable tmp_parent is being ininitialized with a value that is never read, the initialization is redundant and can be removed. Move the initialization and move the variable to the inner loop scope. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20231023133502.666559-1-colin.i.king@gmail.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-08-09clk: sunxi-ng: nkm: Prefer current parent rateFrank Oltmanns1-1/+2
Similar to ccu_mp, if the current parent rate allows getting the ideal rate, prefer to not change the parent clock's rate. Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-11-f173239a4b59@oltmanns.dev Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2023-08-09clk: sunxi-ng: nkm: Support finding closest rateFrank Oltmanns1-11/+9
When finding the best rate for a NKM clock, consider rates that are higher than the requested rate, if the CCU_FEATURE_CLOSEST_RATE flag is set by using the helper function ccu_is_better_rate(). Accommodate ccu_mux_helper_determine_rate to this change. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-7-f173239a4b59@oltmanns.dev Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2023-08-09clk: sunxi-ng: nkm: consider alternative parent rates when determining rateFrank Oltmanns1-1/+43
In case the CLK_SET_RATE_PARENT flag is set, consider using a different parent rate when determining a new rate. To find the best match for the requested rate, perform the following steps for each NKM combination: - calculate the optimal parent rate, - find the best parent rate that the parent clock actually supports - use that parent rate to calculate the effective rate. In case the clk does not support setting the parent rate, use the same algorithm as before. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-2-f173239a4b59@oltmanns.dev Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2023-08-09clk: sunxi-ng: nkm: Use correct parameter name for parent HWFrank Oltmanns1-1/+1
ccu_nkm_round_rate() takes a clk_hw as parameter "hw". Since "hw" is the nkm clock's parent clk_hw, not the clk_hw of the nkm clock itself, change the parameter name to "parent_hw" to make it more clear what we're dealing with. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-1-f173239a4b59@oltmanns.dev Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2023-01-08clk: sunxi-ng: Avoid computing the rate twiceSamuel Holland1-5/+5
The ccu_*_find_best() functions already compute a best_rate at the same time as the other factors. Return this value so the caller does not need to duplicate the computation. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20221231173055.42384-1-samuel@sholland.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2021-11-22clk: sunxi-ng: Export symbols used by CCU driversSamuel Holland1-0/+1
For the individual CCU drivers to be built as modules, the ops structs, helper functions, and callback registration functions must be exported. These symbols are intended for use only by the adjacent CCU drivers, so export them into the SUNXI_CCU namespace. of_sunxi_ccu_probe is not exported because it is only used by built-in OF clock providers. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-2-samuel@sholland.org
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd1-0/+1
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2017-08-14clk: sunxi-ng: nkm: add support for fixed post-dividerIcenowy Zheng1-3/+19
SATA PLL on Allwinner R40 is of type (parent) * N * K / M / 6 where 6 is the fixed post-divider. Add post-divider support for NKM type clock. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> [wens@csie.org: Fixed application of post-divider in set_rate callback] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-06-07clk: sunxi-ng: Pass the parent and a pointer to the clocks round rateMaxime Ripard1-3/+4
The clocks might need to modify their parent clocks. In order to make that possible, give them access to the parent clock being evaluated, and to a pointer to the parent rate so that they can modify it if needed. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-04-13clk: sunxi-ng: use 1 as fallback for minimum multiplierChen-Yu Tsai1-4/+4
A zero multiplier does not make sense for clocks. Use 1 as the minimum when a multiplier minimum isn't specified. Fixes: 2beaa601c849 ("clk: sunxi-ng: Implement minimum for multipliers") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-23clk: sunxi-ng: Implement multiplier maximumMaxime Ripard1-4/+4
Some multipliers have a maximum rate that is lower than what the register width allows to. Add a field in the multiplier structure to allow CCU driver to set that maximum. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-23clk: sunxi-ng: Implement factors offsetsMaxime Ripard1-5/+13
The factors we've seen so far all had an offset of one. However, on the earlier Allwinner SoCs, some factors could have no offset at all, meaning that the value computed to reach the rate we want to use was the one we had to program in the registers. Implement an additional field for the factors that can have such an offset (linears, not based on a power of two) to specify that offset. This offset is not linked to the extremums that can be specified in those structures too. The minimum and maximum are representing the range of values we can use to try to compute the best rate. The offset comes later on when we want to set the best value in the registers. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-10-25clk: sunxi-ng: Implement minimum for multipliersMaxime Ripard1-4/+4
Allow the CCU drivers to specify a multiplier for their clocks. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-10-25clk: sunxi-ng: Add minimums for all the relevant structures and clocksMaxime Ripard1-6/+12
Modify the current clocks we have to be able to specify the minimum for each clocks we support, just like we support the max. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-10-25clk: sunxi-ng: Remove the use of rational computationsMaxime Ripard1-16/+15
While the rational library works great, it doesn't really allow us to add more constraints, like the minimum. Remove that in order to be able to deal with the constraints we'll need. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-10clk: sunxi-ng: div: Allow to set a maximumMaxime Ripard1-2/+2
Some dividers might have a maximum value that is lower than the width of the register. Add a field to _ccu_div to handle those case properly. If the field is set to 0, the code will assume that the maximum value is the maximum one that can be used with the field register width. Otherwise, we'll use whatever value has been set. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-08-08clk: sunxi-ng: nkm: Add mux to support multiple parentsChen-Yu Tsai1-6/+34
The MIPI mode of the MIPI-PLL on A31 is an NKM-style PLL with 2 selectable parents. Add mux support to the NKM clock. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-09clk: sunxi-ng: Add N-K-M Factor clockMaxime Ripard1-0/+153
Introduce support for clocks that multiply and divide using two linear multipliers and one linear divider. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-12-maxime.ripard@free-electrons.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-06 01:49:00 +0300