Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"I'm actually surprised this time. There aren't any new Qualcomm SoC
clk drivers. And there's zero diff in the core clk framework.
Instead we have new clk drivers for STM and Sophgo, with
Samsung^WGoogle in third for the diffstat because they introduced HSI0
and HSI2 clk drivers for Google's GS101 SoC (high speed interface
things like PCIe, UFS, and MMC).
Beyond those big diffs there's the usual updates to various clk
drivers for incorrect parent descriptions or mising
MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super
interesting here.
New Drivers:
- STM32MP257 SoC clk driver
- Airoha EN7581 SoC clk driver
- Sophgo CV1800B, CV1812H and SG2000 SoC clk driver
- Loongson-2k0500 and Loongson-2k2000 SoC clk driver
- Add HSI0 and HSI2 clock controllers for Google GS101
- Add i.MX95 BLK CTL clock driver
Updates:
- Allocate clk_ops dynamically for SCMI clk driver
- Add support in qcom RCG and RCG2 for multiple configurations for
the same frequency
- Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve
issues
- Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some
boards
- Cleanups and fixes for Qualcomm Stromer PLLs
- Reduce max CPU frequency on Qualcomm APSS IPQ5018
- Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera
clk drivers
- Make Qualcomm MSM8998 Venus clocks functional
- Cleanup downstream remnants related to DisplayPort across Qualcomm
SM8450, SM6350, SM8550, and SM8650
- Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL
- Use a specific Qualcomm QCS404 compatible for the otherwise generic
HFPLL
- Remove Qualcomm SM8150 CPUSS AHB clk as it is unused
- Remove an unused field in the Qualcomm RPM clk driver
- Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953
global clock controller drivers
- Allow choice of manual or firmware-driven control over PLLs, needed
to fully implement CPU clock controllers on Exynos850
- Correct PLL clock IDs on ExynosAutov9
- Propagate certain clock rates to allow setting proper SPI clock
rates on Google GS101
- Mark certain Google GS101 clocks critical
- Convert old S3C64xx clock controller bindings to DT schema
- Add new PLL rate and missing mux on Rockchip rk3568
- Add missing reset line on Rockchip rk3588
- Removal of an unused field in struct rockchip_mmc_clock
- Amlogic s4/a1: add regmap maximum register for proper debugfs dump
- Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
- Amlogic pll driver: print clock name on lock error to help debug
- Amlogic vclk: finish dsi clock path support
- Amlogic license: fix occurence "GPL v2" as reported by checkpatch
- Add PM runtime support to i.MX8MP Audiomix
- Add DT schema for i.MX95 Display Master Block Control
- Convert to platform remove callback returning void for i.MX8MP
Audiomix
- Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas
R-Car V4M
- Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five
- Prepare power domain support for Renesas RZ/G2L family members, and
add actual support on Renesas RZ/G3S SoC
- Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas
R-Car V4M
- Add additional constraints to Allwinner A64 PLL MIPI clock
- Fix autoloading sunxi-ng clocks when build as a module"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits)
clk: samsung: Don't register clkdev lookup for the fixed rate clocks
clk, reset: microchip: mpfs: fix incorrect preprocessor conditions
clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs
clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018
clk: qcom: Fix SM_GPUCC_8650 dependencies
clk: qcom: Fix SC_CAMCC_8280XP dependencies
dt-bindings: clocks: stm32mp25: add access-controllers description
clock, reset: microchip: move all mpfs reset code to the reset subsystem
clk: samsung: gs101: drop unused HSI2 clock parent data
clk: rockchip: rk3568: Add PLL rate for 724 MHz
clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
dt-bindings: clock: fixed: Define a preferred node name
clk: meson: s4: fix module autoloading
clk: samsung: gs101: mark some apm UASC and XIU clocks critical
clk: imx: imx8mp: Convert to platform remove callback returning void
clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()
clk: bcm: rpi: Assign ->num before accessing ->hws
clk: bcm: dvp: Assign ->num before accessing ->hws
clk: samsung: gs101: add support for cmu_hsi2
clk: samsung: gs101: add support for cmu_hsi0
...
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table. Clocks are considered core
components, so usually they are built-in, however these can be built and
used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240410155420.224157-1-krzk@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
The Allwinner A64 manual lists the following constraints for the
PLL-MIPI clock:
- M/N <= 3
- (PLL_VIDEO0)/M >= 24MHz
Use these constraints.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-4-46fc80c83637@oltmanns.dev
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
The Allwinner A64 manual lists the following constraints for the
PLL-MIPI clock:
- M/N <= 3
- (PLL_VIDEO0)/M >= 24MHz
The PLL-MIPI clock is implemented as ccu_nkm. Therefore, add support for
these constraints.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-3-46fc80c83637@oltmanns.dev
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
When the Allwinner A64's TCON0 searches the ideal rate for the connected
panel, it may happen that it requests a rate from its parent PLL-MIPI
which PLL-MIPI does not support.
This happens for example on the Olimex TERES-I laptop where TCON0
requests PLL-MIPI to change to a rate of several GHz which causes the
panel to stay blank. It also happens on the pinephone where a rate of
less than 500 MHz is requested which causes instabilities on some
phones.
Set the minimum and maximum rate of Allwinner A64's PLL-MIPI according
to the Allwinner User Manual.
Fixes: ca1170b69968 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reported-by: Diego Roversi <diegor@tiscali.it>
Closes: https://groups.google.com/g/linux-sunxi/c/Rh-Uqqa66bw
Tested-by: Diego Roversi <diegor@tiscali.it>
Cc: stable@vger.kernel.org
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-2-46fc80c83637@oltmanns.dev
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
The Allwinner SoC's typically have an upper and lower limit for their
clocks' rates. Up until now, support for that has been implemented
separately for each clock type.
Implement that functionality in the sunxi-ng's common part making use of
the CCF rate liming capabilities, so that it is available for all clock
types.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Cc: stable@vger.kernel.org
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-1-46fc80c83637@oltmanns.dev
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
While PLL CPUX clock rate change when CPU is running from it works in
vast majority of cases, now and then it causes instability. This leads
to system crashes and other undefined behaviour. After a lot of testing
(30+ hours) while also doing a lot of frequency switches, we can't
observe any instability issues anymore when doing reparenting to stable
clock like 24 MHz oscillator.
Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Reported-by: Chad Wagner <wagnerch42@gmail.com>
Link: https://forum.libreelec.tv/thread/27295-orange-pi-3-lts-freezes/
Tested-by: Chad Wagner <wagnerch42@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20231013181712.2128037-1-jernej.skrabec@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
Variable tmp_parent is being ininitialized with a value that is never
read, the initialization is redundant and can be removed. Move the
initialization and move the variable to the inner loop scope.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231023133502.666559-1-colin.i.king@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
'clk-rockchip' into clk-next
- Add Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
- Introduce kstrdup_and_replace() and use it
* clk-versa:
clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()
clk: vc5: Use i2c_get_match_data() instead of device_get_match_data()
clk: versaclock3: Switch to use i2c_driver's probe callback
clk: Add support for versa3 clock driver
dt-bindings: clock: Add Renesas versa3 clock generator bindings
* clk-strdup:
clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()
clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace()
driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
lib/string_helpers: Add kstrdup_and_replace() helper
* clk-amlogic: (22 commits)
dt-bindings: soc: amlogic: document System Control registers
dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
clk: meson: axg-audio: move bindings include to main driver
clk: meson: meson8b: move bindings include to main driver
clk: meson: a1: move bindings include to main driver
clk: meson: eeclk: move bindings include to main driver
clk: meson: aoclk: move bindings include to main driver
dt-bindings: clk: axg-audio-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
dt-bindings: clk: meson8b-clkc: expose all clock ids
dt-bindings: clk: g12a-aoclkc: expose all clock ids
dt-bindings: clk: g12a-clks: expose all clock ids
dt-bindings: clk: axg-clkc: expose all clock ids
dt-bindings: clk: gxbb-clkc: expose all clock ids
clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
...
* clk-allwinner:
clk: sunxi-ng: nkm: Prefer current parent rate
clk: sunxi-ng: a64: select closest rate for pll-video0
clk: sunxi-ng: div: Support finding closest rate
clk: sunxi-ng: mux: Support finding closest rate
clk: sunxi-ng: nkm: Support finding closest rate
clk: sunxi-ng: nm: Support finding closest rate
clk: sunxi-ng: Add helper function to find closest rate
clk: sunxi-ng: Add feature to find closest rate
clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
clk: sunxi-ng: nkm: Use correct parameter name for parent HW
clk: sunxi-ng: Modify mismatched function name
clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()
* clk-rockchip:
clk: rockchip: rv1126: Add PD_VO clock tree
clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
clk: rockchip: rk3568: Add PLL rate for 101MHz
|
|
Similar to ccu_mp, if the current parent rate allows getting the ideal
rate, prefer to not change the parent clock's rate.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-11-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Selecting the closest rate for pll-video0 instead of the closest rate
that is less than the requested rate has no downside for this clock,
while allowing for selecting a more suitable rate, e.g. for the
connected panels.
Furthermore, the algorithm that sets an NKM clock's parent benefits from
the closest rate. Without it, the NKM clock's rate might drift away from
the requested rate in the multiple successive calls to
ccu_nkm_determine_rate that the clk framework performs when setting a
clock rate.
Therefore, configure pll-video0 and, in consequence, all of its
descendents to select the closest rate.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-10-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add initalization macros for divisor clocks with mux
(SUNXI_CCU_M_WITH_MUX) to support finding the closest rate. This clock
type requires the appropriate flags to be set in the .common structure
(for the mux part of the clock) and the .div part.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-9-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
When finding the best rate for a mux clock, consider rates that are
higher than the requested rate when CCU_FEATURE_ROUND_CLOSEST is used.
Furthermore, introduce an initialization macro that sets this flag.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-8-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
When finding the best rate for a NKM clock, consider rates that are
higher than the requested rate, if the CCU_FEATURE_CLOSEST_RATE flag is
set by using the helper function ccu_is_better_rate().
Accommodate ccu_mux_helper_determine_rate to this change.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-7-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Use the helper function ccu_is_better_rate() to determine the rate that
is closest to the requested rate, thereby supporting rates that are
higher than the requested rate if the clock uses the
CCU_FEATURE_CLOSEST_RATE.
Add the macro SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_CLOSEST which
sets CCU_FEATURE_CLOSEST_RATE.
To avoid code duplication, add the macros
SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_FEAT that allows selecting
arbitrary features and use it in the original
SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX as well as the newly introduced
SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_CLOSEST macros.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-6-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The default behaviour of clocks in the sunxi-ng driver is to select a
clock rate that is closest to but less than the requested rate.
Add the ccu_is_better_rate() helper function that - depending on the
fact if thc CCU_FEATURE_CLOSEST_RATE flag is set - decides if a rate is
closer than another rate.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-5-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The default behaviour of clocks in the sunxi-ng driver is to select a
clock rate that is closest to but less than the requested rate.
Add the CCU_FEATURE_CLOSEST_RATE flag, which can be used to allow clocks
to find the closest rate instead.
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-4-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The nkm clock now supports setting the parent's rate. Utilize this
option to find the optimal rate for pll-mipi.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-3-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
In case the CLK_SET_RATE_PARENT flag is set, consider using a different
parent rate when determining a new rate.
To find the best match for the requested rate, perform the following
steps for each NKM combination:
- calculate the optimal parent rate,
- find the best parent rate that the parent clock actually supports
- use that parent rate to calculate the effective rate.
In case the clk does not support setting the parent rate, use the same
algorithm as before.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-2-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
ccu_nkm_round_rate() takes a clk_hw as parameter "hw". Since "hw" is the
nkm clock's parent clk_hw, not the clk_hw of the nkm clock itself,
change the parameter name to "parent_hw" to make it more clear what
we're dealing with.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-1-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
No functional modification involved.
drivers/clk/sunxi-ng/ccu_mmc_timing.c:54: warning: expecting prototype for sunxi_ccu_set_mmc_timing_mode(). Prototype was for sunxi_ccu_get_mmc_timing_mode() instead
Fixes: f6f64ed868d3 ("clk: sunxi-ng: Add interface to query or configure MMC timing modes.")
Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230722153107.2078179-1-chris.zjh@huawei.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org
Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
TCON0's source clock can be fed from either PLL_MIPI, or PLL_VIDEO0(2X),
however MIPI DSI output only seems to work when PLL_MIPI is selected and
thus the choice must be hardcoded in.
Currently, this driver can't propagate rate change from N-K-M clocks
(such as PLL_MIPI) upwards. This prevents PLL_VIDEO0 from participating
in setting of the TCON0 data clock rate, limiting the precision with
which a target pixel clock can be matched.
For outputs with fixed TCON0 divider, that is DSI and LVDS, the dotclock
can deviate up to 8% off target.
Signed-off-by: Roman Beranek <me@crly.cz>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20230505052110.67514-2-me@crly.cz
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
The D1 CCU contains gates and resets for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the CCU is the
same across all SoC variants.
Signed-off-by: Fabien Poussin <fabien.poussin@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221231231429.18357-7-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
Some SoCs in the D1 family feature ARM CPUs instead of a RISC-V CPU.
In that case, the CPUs are driven from the 'cpux' clock, so it needs
to be marked as critical, since there is no consumer when DVFS is
disabled. This matches the drivers for other SoCs, and the "riscv"
clock in this driver.
Signed-off-by: András Szemző <szemzo.andras@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-5-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
Allwinner released some 32-bit ARM (sun8i) SoCs which use the same CCU
as D1. Allow them to reuse the driver.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-4-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
Do not duplicate the same expression on the `default` line, so the two
lines do not need to be kept in sync. Drivers stay disabled under
COMPILE_TEST because of the `default ARCH_SUNXI` applied to SUNXI_CCU.
Three drivers had no conditions.
- SUN6I_RTC_CCU and SUN8I_DE2_CCU are used on current hardware
regardless of CPU architecture.
- SUN8I_R_CCU is only used on pre-H6 SoCs, which means no RISCV SoCs.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
SUNXI_CCU already depends on ARCH_SUNXI, so adding the dependency to
individual SoC drivers is redundant. Drivers stay disabled under
COMPILE_TEST because of the `default ARCH_SUNXI` applied to SUNXI_CCU.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
The ccu_*_find_best() functions already compute a best_rate at the same
time as the other factors. Return this value so the caller does not need
to duplicate the computation.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20221231173055.42384-1-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
The DRAM controller clock is only allowed to change frequency while the
DRAM chips are in self-refresh. To support this, changes to the CLK_DRAM
mux and divider have no effect until acknowledged by the memory dynamic
frequency scaling (MDFS) hardware inside the DRAM controller. (There is
a SDRCLK_UPD bit in DRAM_CFG_REG which should serve a similar purpose,
but this bit actually does nothing.)
However, the MDFS hardware in H3 appears to be broken. Triggering a
frequency change using the procedure from similar SoCs (A64/H5) hangs
the hardware. Additionally, the vendor BSP specifically avoids using the
MDFS hardware on H3, instead performing all DRAM PHY parameter updates
and resets in software.
Thus, it is effectively impossible to change the CLK_DRAM mux/divider,
so those features should not be modeled. Add CLK_SET_RATE_PARENT so
frequency changes apply to PLL_DDR instead.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221229042230.24532-1-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
Use '-' to separate the function name and its description.
Use '%' on constants in kernel-doc notation.
Use the kernel-doc Return: format for function return values.
Fixes this warning:
ccu_mmc_timing.c:21: warning: No description found for return value of 'sunxi_ccu_set_mmc_timing_mode'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20221122184844.6794-1-rdunlap@infradead.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
For some reason the mod clock for the Allwinner F1C100s CIR (infrared
receiver) peripheral was not modeled in the CCU driver.
Add the clock description to the list, and wire it up in the clock list.
By assigning a new clock ID at the end, it extends the number of clocks.
This allows to use the CIR peripheral on any F1C100s series board.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221107005433.11079-5-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
Rename the header guard of ccu-sun8i-v3s.h from _CCU_SUN8I_H3_H_ to
_CCU_SUN8I_V3S_H_ what corresponding with the file name.
Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Wei Li <liwei391@huawei.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221108094335.3597008-1-liwei391@huawei.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have some late breaking reports that a patch series to rework clk
rate range support broke boot on some devices, so I've left that
branch out of this. Hopefully we can get to that next week, or punt on
it and let it bake another cycle. That means we don't really have any
changes to the core framework this time around besides a few typo
fixes. Instead this is all clk driver updates and fixes.
The usual suspects are here (again), with Qualcomm dominating the
diffstat. We look to have gained support for quite a few new Qualcomm
SoCs and Dmitry worked on updating many of the existing Qualcomm
drivers to use clk_parent_data. After that we have MediaTek drivers
getting some much needed updates, in particular to support GPU DVFS.
There are also quite a few Samsung clk driver patches, but that's
mostly because there was a maintainer change and so last release we
missed some of those patches.
Overall things look normal, but I'm slowly reviewing core framework
code nowadays and that shows given the rate range patches had to be
yanked last minute. Let's hope this situation changes soon.
New Drivers:
- Support for Renesas VersaClock7 clock generator family
- Add Spreadtrum UMS512 SoC clk support
- New clock drivers for MediaTek Helio X10 MT6795
- Display clks for Qualcomm SM6115, SM8450
- GPU clks for Qualcomm SC8280XP
- Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers
Deleted Drivers:
- Remove DaVinci DM644x and DM646x clk driver support
Updates:
- Convert Baikal-T1 CCU driver to platform driver
- Split reset support out of primary Baikal-T1 CCU driver
- Add some missing clks required for RPiVid Video Decoder on
RaspberryPi
- Mark PLLC critical on bcm2835
- More devm helpers for fixed rate registration
- Various PXA168 clk driver fixes
- Add resets for MediaTek MT8195 PCIe and USB
- Miscellaneous of_node_put() fixes
- Nuke dt-bindings/clk path (again) by moving headers to
dt-bindings/clock
- Convert gpio-clk-gate binding to YAML
- Various fixes to AMD/Xilinx Zynqmp clk driver
- Graduate AMD/Xilinx "clocking wizard" driver from staging
- Add missing DPI1_HDMI clock in MT8195 VDOSYS1
- Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195
- Fix GPU clock topology on MT8195
- Propogate rate changes from GPU clock gate up the tree
- Clock mux notifiers for GPU-related PLLs
- Conversion of more "simple" drivers to mtk_clk_simple_probe()
- Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers
- Fixes to previous |struct clk| to |struct clk_hw| conversion on
MediaTek
- Shrink MT8192 clock driver by deduplicating clock parent lists
- Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk'
clocks for i.MX8MP
- Drop unnecessary newline in i.MX8MM dt-bindings
- Add more MU1 and SAI clocks dt-bindings Ids
- Introduce slice busy bit check for i.MX93 composite clock
- Introduce white list bit check for i.MX93 composite clock
- Add new i.MX93 clock gate
- Add MU1 and MU2 clocks to i.MX93 clock provider
- Add SAI IPG clocks to i.MX93 clock provider
- add generic clocks for U(S)ART available on SAMA5D2 SoCs
- reset controller support for Polarfire clocks
- .round_rate and .set rate support for clk-mpfs
- code cleanup for clk-mpfs
- PLL support for PolarFire SoC's Clock Conditioning Circuitry
- Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car
V4H
- Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8
- Add I2C clocks and resets on RZ/V2M
- Document clock support for the RZ/Five SoC
- mux-variant clock using the table variant to select parents
- clock controller for the rv1126 soc
- conversion of rk3128 to yaml and relicensing of the yaml bindings
to gpl2+MIT (following dt-binding guildelines)
- Exynos7885: add FSYS, TREX and MFC clock controllers
- Exynos850: add IS and AUD (audio) clock controllers with bindings
- ExynosAutov9: add FSYS clock controllers with bindings
- ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock
controllers, due to duplicated entries. This is an acceptable ABI
break: recently developed/added platform so without legacies, acked
by known users/developers
- ExynosAutov9: add few missing Peric 0/1 gates
- ExynosAutov9: correct register offsets of few Peric 0/1 clocks
- Minor code improvements (use of_device_get_match_data() helper,
code style)
- Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as
he already maintainers that architecture/platform
- Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving
retention issues during suspend of USB on Qualcomm sc7180/sc7280
and SC8280XP
- Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration
- Qualcomm SDM660 SDCC1 moved to floor clk ops
- Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018
was added/fixed
- The Qualcomm MSM8996 CPU clocks are updated with support for ACD
- Support for Qualcomm SDM670 GCC and RPMh clks was added
- Transition to parent_data, parent_hws and use of ARRAY_SIZE() for
num_parents was done for many Qualcomm SoCs
- Support for per-reset defined delay on Qualcomm was introduced"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits)
clk: qcom: gcc-sm6375: Ensure unsigned long type
clk: qcom: gcc-sm6375: Remove unused variables
clk: qcom: kpss-xcc: convert to parent data API
clk: introduce (devm_)hw_register_mux_parent_data_table API
clk: allow building lan966x as a module
clk: clk-xgene: simplify if-if to if-else
clk: ast2600: BCLK comes from EPLL
clk: clocking-wizard: Depend on HAS_IOMEM
clk: clocking-wizard: Use dev_err_probe() helper
clk: nxp: fix typo in comment
clk: pxa: add a check for the return value of kzalloc()
clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975
dt-bindings: clock: vc5: Add 5P49V6975
clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable
clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
clk: Renesas versaclock7 ccf device driver
dt-bindings: Renesas versaclock7 device tree bindings
clk: ti: Balance of_node_get() calls for of_find_node_by_name()
clk: imx: scu: fix memleak on platform_device_add() fails
clk: vc5: Use regmap_{set,clear}_bits() where appropriate
...
|
|
In commit 4167ac8a657e ("clk: sunxi-ng: sun50i: h6: Modify GPU clock
configuration to support DFS") divider M0 was forced to be 1 in order to
support DFS. However, that left N as it is, at high value of 36. On
boards without devfreq enabled (all of them in kernel 6.0), this
effectively sets GPU frequency to 864 MHz. This is about 100 MHz above
maximum supported frequency.
In order to fix this, let's set N to 18 (register value 17). That way
default frequency of 432 MHz is preserved.
Fixes: 4167ac8a657e ("clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220928200122.3963509-1-jernej.skrabec@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220827094151.3323450-3-yangyingliang@huawei.com
|
|
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220827094151.3323450-2-yangyingliang@huawei.com
|
|
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220827094151.3323450-1-yangyingliang@huawei.com
|
|
Set the min/max rates for audio and video PLLs to keep them from going
outside their documented stable ranges. Use the most restrictive of the
"stable" and "actual" frequencies listed in the manual.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220812080050.59850-1-samuel@sholland.org
|
|
Using simple bash script it was discovered that not all CCU registers
can be safely used for DFS, e.g.:
while true
do
devmem 0x3001030 4 0xb0003e02
devmem 0x3001030 4 0xb0001e02
done
Script above changes the GPU_PLL multiplier register value. While the
script is running, the user should interact with the user interface.
Using this method the following results were obtained:
| Register | Name | Bits | Values | Result |
| -- | -- | -- | -- | -- |
| 0x3001030 | GPU_PLL.MULT | 15..8 | 20-62 | OK |
| 0x3001030 | GPU_PLL.INDIV | 1 | 0-1 | OK |
| 0x3001030 | GPU_PLL.OUTDIV | 0 | 0-1 | FAIL |
| 0x3001670 | GPU_CLK.DIV | 3..0 | ANY | FAIL |
DVFS started to work seamlessly once dividers which caused the
glitches were set to fixed values.
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220705075226.359475-1-r.stratiienko@gmail.com
|
|
The ccu_clks arrays are used to link ccu_common objects to a platform
device during probe. There is no requirement that the clk_hw inside the
ccu_common object ever gets registered with the clock framework. So the
drivers do not need a separate ccu_clks array for each CCU variant.
A single array per driver, containing the union of the CCU clocks from
all variants, is sufficient.
Let's save some space by combining the ccu_clks arrays in each driver.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220531043539.41549-1-samuel@sholland.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Mainly driver updates this time around.
There's a single patch to the core clk framework that simplifies a
runtime PM call. Otherwise the majority of the diff falls to a few SoC
drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new
hardware support and what comes along with that is quite a few lines
of data and some clk_ops code.
Beyond the new hardware support we have the usual pile of driver
updates that add missing clks on already supported SoCs or fix up
problems like bad clk tree descriptions. It's nice to see that more
drivers are moving to clk_hw based APIs too.
New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC
Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged
leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas
RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already
booted for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG
clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits)
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
clk: stm32mp13: add safe mux management
clk: stm32mp13: add multi mux function
clk: stm32mp13: add all STM32MP13 kernel clocks
clk: stm32mp13: add all STM32MP13 peripheral clocks
clk: stm32mp13: manage secured clocks
clk: stm32mp13: add composite clock
clk: stm32mp13: add stm32 divider clock
clk: stm32mp13: add stm32_gate management
clk: stm32mp13: add stm32_mux clock management
clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
clk: ti: composite: Prefer kcalloc over open coded arithmetic
dt-bindings: clock: exynosautov9: correct count of NR_CLK
clk: mediatek: mt8173: Switch to clk_hw provider APIs
clk: mediatek: Switch to clk_hw provider APIs
...
|
|
This reverts commit 1738890a3165ccd0da98ebd3e2d5f9b230d5afa8.
Commit 1738890a3165 ("clk: sunxi-ng: sun6i-rtc: Add support for H6")
breaks HDMI output on Tanix TX6 mini board. Exact reason isn't known,
but because that commit doesn't actually improve anything, let's just
revert it.
Cc: stable@vger.kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220511200206.2458274-1-jernej.skrabec@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The RTC section of the H616 manual mentions in a half-sentence the
existence of a clock "32K divided by PLL_PERI(2X)". This is used as
one of the possible inputs for the mux that selects the clock for the
32 KHz fanout pad. On the H616 this is routed to pin PG10, and some
boards use that clock output to compensate for a missing 32KHz crystal.
On the OrangePi Zero2 this is for instance connected to the LPO pin of
the WiFi/BT chip.
The new RTC clock binding requires this clock to be named as one input
clock, so we need to expose this to the DT. In contrast to the D1 SoC
there does not seem to be a gate for this clock, so just use a fixed
divider clock, using a newly assigned clock number.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220428230933.15262-3-andre.przywara@arm.com
|
|
The H6 and H616 feature an (undocumented) bus clock gate for accessing
the RTC registers. This seems to be enabled at reset (or by the BootROM),
so we got away without it so far, but exists regardless.
Since the new RTC clock binding for the H616 requires this "bus" clock
to be specified in the DT, add this to R_CCU clock driver and expose it
on the DT side with a new number.
We do this for both the H6 and H616, but mark it as IGNORE_UNUSED, as we
cannot reference it in any H6 DTs.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220428230933.15262-2-andre.przywara@arm.com
|
|
Because some newer hardware variants have multiple possible parents for
the RTC's timekeeping clock, this driver models it as a "rtc-32k" clock.
However, it does not add any consumer for this clock. This causes the
common clock framework to disable it, preventing RTC time access.
Since the RTC's timekeeping clock should always be enabled, regardless
of which drivers are loaded, let's mark this clock as critical instead
of adding a consumer in the RTC driver.
Fixes: d91612d7f01a ("clk: sunxi-ng: Add support for the sun6i RTC clocks")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220411050100.40964-1-samuel@sholland.org
|
|
Fix the following coccicheck error:
./drivers/clk/sunxi-ng/ccu-sun6i-rtc.c:348:1-2: sun6i_rtc_ccu_match is
not NULL terminated at line 348
Fixes: d91612d7f01a ("clk: sunxi-ng: Add support for the sun6i RTC clocks")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220328073931.36544-1-wanjiabing@vivo.com
|
|
This solves:
>> drivers/clk/sunxi-ng/ccu-sun6i-rtc.c:334:5: warning: no previous prototype for 'sun6i_rtc_ccu_probe' [-Wmissing-prototypes]
334 | int sun6i_rtc_ccu_probe(struct device *dev, void __iomem *reg)
| ^~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220320210905.6606-1-alexandre.belloni@bootlin.com
|
|
H6 supports IOSC calibration and an ext-osc32k input. Unlike newer SoCs,
it has a single parent for its fanout clock.
Add support for H6 in the CCU driver, replacing the support in the
existing early OF clock provider.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220203021736.13434-7-samuel@sholland.org
|
|
The RTC power domain in sun6i and newer SoCs manages the 16 MHz RC
oscillator (called "IOSC" or "osc16M") and the optional 32 kHz crystal
oscillator (called "LOSC" or "osc32k"). Starting with the H6, this power
domain also handles the 24 MHz DCXO (called variously "HOSC", "dcxo24M",
or "osc24M") as well. The H6 also adds a calibration circuit for IOSC.
Later SoCs introduce further variations on the design:
- H616 adds an additional mux for the 32 kHz fanout source.
- R329 adds an additional mux for the RTC timekeeping clock, a clock
for the SPI bus between power domains inside the RTC, and removes the
IOSC calibration functionality.
Take advantage of the CCU framework to handle this increased complexity.
This driver is intended to be a drop-in replacement for the existing RTC
clock provider. So some runtime adjustment of the clock parents is
needed, both to handle hardware differences, and to support the old
binding which omitted some of the input clocks.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220203021736.13434-6-samuel@sholland.org
|