summaryrefslogtreecommitdiff
path: root/drivers/clk/tegra
AgeCommit message (Collapse)AuthorFilesLines
2020-05-12clk: tegra: Export functions for EMC clock scalingJoseph Lo1-0/+26
Export functions to allow accessing the CAR register required by EMC clock scaling. These functions will be used to access the CAR register as part of the scaling sequence. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12clk: tegra: Add PLLP_UD and PLLMB_UD for Tegra210Joseph Lo1-0/+11
Introduce the low jitter path of PLLP and PLLMB which can be used as EMC clock source. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12clk: tegra: Rename Tegra124 EMC clock source fileThierry Reding4-6/+2
This code is only used on Tegra124, so rename it accordingly to make it more consistent with other file names. While at it, also get rid of the TEGRA_CLK_EMC Kconfig symbol that's really just an alias for TEGRA124_EMC. Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-25clk: tegra: Use NULL for pointer initializationStephen Boyd1-1/+1
This silences a sparse warning about using a plain integer instead of NULL for a pointer. Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-12clk: tegra: Remove audio clocks configuration from clock driverSowjanya Komatineni5-15/+10
Current clock driver enables PLLA, cdev1 on Tegra20 and extern1 on Tegra30 and above as a part of clocks init and there is no need to have these audio clocks enabled by the clock driver. extern1 is used as parent for clk_out_1 and clk_out_1 is dedicated for audio mclk on Tegra30 and above Tegra platforms and these clocks are taken care by ASoC driver. So, this patch removes audio related clocks configuration from clock init of Tegra20 and above. Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-12clk: tegra: Remove tegra_pmc_clk_init along with clk idsSowjanya Komatineni9-201/+19
Current Tegra clock driver registers PMC clocks clk_out_1, clk_out_2, clk_out_3 and 32KHz blink output in tegra_pmc_init() which does direct PMC register access during clk_ops and these PMC register read and write access will not happen when PMC is in secure mode. Any direct PMC register access from non-secure world will not go through. All the PMC clocks are moved to Tegra PMC driver with PMC as a clock provider. This patch removes tegra_pmc_clk_init along with corresponding clk ids from Tegra clock driver. Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-12clk: tegra: Remove CLK_M_DIV fixed clocksSowjanya Komatineni6-45/+0
Tegra has no CLK_M_DIV2 and CLK_M_DIV4 clocks and instead it has OSC_DIV2 and OSC_DIV4 clocks from OSC pads which are the possible parents of PMC clocks for Tegra30 through Tegra210. Tegra PMC clock parents are changed to use OSC_DIV clocks. So, this patch removes CLK_M_DIV fixed clocks Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-12clk: tegra: Fix Tegra PMC clock out parentsSowjanya Komatineni1-6/+6
Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3 supported parents are osc, osc_div2, osc_div4 and extern clock. Clock driver is using incorrect parents clk_m, clk_m_div2, clk_m_div4 for PMC clocks. This patch fixes this. Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-12clk: tegra: Add Tegra OSC to clock lookupSowjanya Komatineni6-0/+14
OSC is one of the parent for Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3. This patch adds Tegra OSC to clock lookup. Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-12clk: tegra: Add support for OSC_DIV fixed clocksSowjanya Komatineni6-0/+34
Tegra30 through Tegra210 has OSC_DIV2 and OSC_DIV4 fixed clocks from the OSC pads. This patch adds support for these clocks. Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-02-01Merge branches 'clk-imx', 'clk-ti', 'clk-xilinx', 'clk-nvidia', 'clk-qcom', ↵Stephen Boyd5-11/+15
'clk-freescale' and 'clk-qoriq' into clk-next - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Fixes for clk controllers on qcom msm8998 SoCs - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Adjust composite clk to new way of describing clk parents - Add a driver for BCLK of Freescale SAI cores * clk-imx: (32 commits) clk: imx: Add support for i.MX8MP clock driver dt-bindings: imx: Add clock binding doc for i.MX8MP clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API clk: imx: imx8mq: Switch to clk_hw based API clk: imx: imx8mm: Switch to clk_hw based API clk: imx: imx8mn: Switch to clk_hw based API clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API clk: imx: gate3: Switch to clk_hw based API clk: imx: add hw API imx_clk_hw_mux2_flags clk: imx: add imx_unregister_hw_clocks clk: imx: clk-composite-8m: Switch to clk_hw based API clk: imx: clk-pll14xx: Switch to clk_hw based API clk: imx7up: Rename the clks to hws clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based clk: imx: Rename sccg and frac pll register to suggest clk_hw clk: imx: imx7ulp composite: Rename to show is clk_hw based clk: imx: pllv2: Switch to clk_hw based API clk: imx: pllv1: Switch to clk_hw based API ... * clk-ti: clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock clk: ti: dra7: fix parent for gmac_clkctrl clk: ti: dra7: add vpe clkctrl data clk: ti: dra7: add cam clkctrl data dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock * clk-xilinx: clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver * clk-nvidia: clk: tegra20/30: Explicitly set parent clock for Video Decoder clk: tegra20/30: Don't pre-initialize displays parent clock clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe() clk: tegra: Mark fuse clock as critical * clk-qcom: (35 commits) clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: qcom: Add ipq6018 Global Clock Controller support clk: qcom: Add DT bindings for ipq6018 gcc clock controller clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks clk: qcom: rpmh: Add IPA clock for SC7180 clk: qcom: rpmh: skip undefined clocks when registering clk: qcom: Add video clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings clk: qcom: Add graphics clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent clk: qcom: Add display clock controller driver for SC7180 dt-bindings: clock: Introduce QCOM sc7180 display clock bindings dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration clk: qcom: alpha-pll: Remove useless read from set rate ... * clk-freescale: clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants * clk-qoriq: clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
2020-01-10clk: tegra20/30: Explicitly set parent clock for Video DecoderDmitry Osipenko2-2/+2
The VDE parent won't be changed automatically to PLLC if bootloader didn't do that for us, hence let's explicitly set the parent for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-10clk: tegra20/30: Don't pre-initialize displays parent clockDmitry Osipenko2-4/+0
Both Tegra20 and Tegra30 are initializing display's parent clock incorrectly because PLLP is running at 216/408MHz while display rate is set to 600MHz, but pre-setting the parent isn't needed at all because display driver selects proper parent anyways. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-10clk: tegra: divider: Check UART's divider enable-bit state on rate's ↵Dmitry Osipenko1-2/+7
recalculation UART clock is divided using divisor values from DLM/DLL registers when enable-bit is unset in clk register and clk's divider configuration isn't taken onto account in this case. This doesn't cause any problems, but let's add a check for the divider's enable-bit state, for consistency. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-10clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe()Sowjanya Komatineni1-2/+1
pm_runtime_irq_safe() is not needed as interrupts are allowed during suspend and resume. This was added mistakenly during DFLL suspend and resume support patch. While at it, also update the description of the dev argument that is passed to the tegra_dfll_suspend() function. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-08clk: tegra: Mark fuse clock as criticalStephen Warren1-1/+5
For a little over a year, U-Boot on Tegra124 has configured the flow controller to perform automatic RAM re-repair on off->on power transitions of the CPU rail[1]. This is mandatory for correct operation of Tegra124. However, RAM re-repair relies on certain clocks, which the kernel must enable and leave running. The fuse clock is one of those clocks. Mark this clock as critical so that LP1 power mode (system suspend) operates correctly. [1] 3cc7942a4ae5 ARM: tegra: implement RAM repair Reported-by: Jonathan Hunter <jonathanh@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-12-24clk: tegra: Fix double-free in tegra_clk_init()Dmitry Osipenko1-1/+3
It's unlikely to happen in practice ever, but makes static checkers happy. Fixes: 535f296d47de ("clk: tegra: Add suspend and resume support on Tegra210") Reported-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lkml.kernel.org/r/20191210020512.6088-1-digetx@gmail.com Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-14clk: tegra: Use match_string() helper to simplify the codeYueHaibing1-8/+4
match_string() returns the array index of a matching string. Use it instead of the open-coded implementation. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.kernel.org/r/20191109034226.21044-1-yuehaibing@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-11clk: tegra: Fix build error without CONFIG_PM_SLEEPYueHaibing1-0/+2
If CONFIG_PM_SLEEP is n, build fails: drivers/clk/tegra/clk-tegra210.c:3426:13: error: tegra210_clk_suspend undeclared here (not in a function); did you mean tegra_clk_ndspeed? .suspend = tegra210_clk_suspend, ^~~~~~~~~~~~~~~~~~~~ tegra_clk_ndspeed drivers/clk/tegra/clk-tegra210.c:3427:12: error: tegra210_clk_resume undeclared here (not in a function); did you mean tegra210_clk_suspend? .resume = tegra210_clk_resume, Use ifdef to guard this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 27d10d548c04 ("clk: tegra: Add suspend and resume support on Tegra210") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Optimize PLLX restore on Tegra20/30Dmitry Osipenko2-18/+32
There is no need to re-configure PLLX if its configuration in unchanged on return from suspend / cpuidle, this saves 300us if PLLX is already enabled (common case for cpuidle). Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Add suspend and resume support on Tegra210Sowjanya Komatineni3-4/+163
All the CAR controller settings are lost on suspend when core power goes off. This implement saving and restoring context for all PLLs and clocks during system suspend and resume to have the clocks back to same state for normal operation. Clock driver suspend and resume are registered as syscore_ops as clocks restore need to happen before the other drivers resume to have all their clocks back to the same state as before suspend. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Share clk and rst register defines with Tegra clock driverSowjanya Komatineni2-45/+45
Move CLK_OUT_ENB and RST_DEVICES registers to clk.h to share these with Tegra clock driver. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Use fence_udelay() during PLLU initSowjanya Komatineni1-4/+4
This patch uses fence_udelay rather than udelay during PLLU initialization to ensure writes to clock registers happens before waiting for specified delay. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: clk-dfll: Add suspend and resume supportSowjanya Komatineni3-0/+59
This patch implements DFLL suspend and resume operation. During system suspend entry, CPU clock will switch CPU to safe clock source of PLLP and disables DFLL clock output. DFLL driver suspend confirms DFLL disable state and errors out on being active. DFLL is re-initialized during the DFLL driver resume as it goes through complete reset during suspend entry. Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: clk-super: Add restore-context supportSowjanya Komatineni1-0/+27
This patch implements restore_context for clk_super_mux and clk_super. During system supend, core power goes off the and context of Tegra CAR registers is lost. So on system resume, context of super clock registers are restored to have them in same state as before suspend. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: clk-super: Fix to enable PLLP branches to CPUSowjanya Komatineni4-1/+39
This patch has a fix to enable PLLP branches to CPU before changing the CPU cluster clock source to PLLP for Gen5 Super clock and disables PLLP branches to CPU when not in use. During system suspend entry and exit, CPU source will be switched to PLLP and this needs PLLP branches to be enabled to CPU prior to the switch. On system resume, warmboot code enables PLLP branches to CPU and powers up the CPU with PLLP clock source. Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: periph: Add restore_context supportSowjanya Komatineni2-0/+37
This patch implements restore_context support for clk-periph and clk-sdmmc-mux clock operations to restore clock parent and rates on system resume. During system suspend, core power goes off and looses the context of the Tegra clock controller registers. So on system resume, clocks parent and rate are restored back to the context before suspend based on cached data. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Support for OSC context save and restoreSowjanya Komatineni2-0/+16
This patch adds support for saving OSC clock frequency and the drive-strength during OSC clock init and creates an API to restore OSC control register value from the saved context. This API is invoked by Tegra210 clock driver during system resume to restore the OSC clock settings. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: pll: Save and restore pll contextSowjanya Komatineni1-32/+54
This patch implements save and restore of PLL context. During system suspend, core power goes off and looses the settings of the Tegra CAR controller registers. So during resume, pll context is restored based on cached rate and state. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: pllout: Save and restore pllout contextSowjanya Komatineni1-0/+9
This patch implements save and restore of pllout context. During system suspend, core power goes off and looses the settings of the Tegra CAR controller registers. So during suspend entry the state of pllout is saved and on resume it is restored back to have pllout in same state as before suspend. pllout rate is saved and restore in clock divider so it will be at same rate as before suspend when pllout state is restored. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: divider: Save and restore divider rateSowjanya Komatineni1-0/+11
This patch implements context restore for clock divider. During system suspend, core power goes off and looses the settings of the Tegra CAR controller registers. So on resume, clock dividers are restored back for normal operation. Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Reimplement SOR clocks on Tegra210Thierry Reding1-16/+55
In order to allow the display driver to deal uniformly with all SOR generations, implement the SOR clocks in a way that is compatible with Tegra186 and later. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Reimplement SOR clock on Tegra124Thierry Reding1-9/+13
In order to allow the display driver to deal uniformly with all SOR generations, implement the SOR clocks in a way that is compatible with Tegra186 and later. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Rename sor0_lvds to sor0_outThierry Reding3-8/+8
This makes Tegra124 and Tegra210 consistent with subsequent Tegra generations. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Move SOR0 implementation to Tegra124Thierry Reding2-8/+49
The SOR0 clock on Tegra210 is very different from the SOR0 clock found on Tegra124. Move the Tegra124 implementation to the Tegra124 driver so that a custom implementation can be provided on Tegra210 without clashing with the existing clock. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Remove last remains of TEGRA210_CLK_SOR1_SRCThierry Reding2-2/+2
Later SoC generations implement this clock as SOR1_OUT. For consistency, the Tegra210 implementation was adapted to match the same name in commit 4d1dc4018573 ("dt-bindings: clock: tegra: Add sor1_out clock"). Clean up the remaining pieces by adopting the new name for the internal identifiers and remove the old alias. Note that since both SOR1_SRC and SOR1_OUT were referring to the same device tree clock ID, this does not break device tree ABI. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Add Tegra20/30 EMC clock implementationDmitry Osipenko5-52/+339
A proper External Memory Controller clock rounding and parent selection functionality is required by the EMC drivers, it is not available using the generic clock implementation because only the Memory Controller driver is aware of what clock rates are actually available for a particular device. EMC drivers will have to register a Tegra-specific CLK-API callback which will perform rounding of a requested rate. EMC clock users won't be able to request EMC clock by getting -EPROBE_DEFER until EMC driver is probed and the callback is set up. The functionality is somewhat similar to the clk-emc.c which serves Tegra124+ SoCs. The later HW generations support more parent clock sources and the HW configuration / integration with the EMC drivers differs a tad from the older gens, hence it's not really worth to try to squash everything into a single source file. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds1-8/+12
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-06-28Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A handful of clk driver fixes and one core framework fix - Do a DT/firmware lookup in clk_core_get() even when the DT index is a nonsensical value - Fix some clk data typos in the Amlogic DT headers/code - Avoid returning junk in the TI clk driver when an invalid clk is looked for - Fix dividers for the emac clks on Stratix10 SoCs - Fix default HDA rates on Tegra210 to correct distorted audio" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: socfpga: stratix10: fix divider entry for the emac clocks clk: Do a DT parent lookup even when index < 0 clk: tegra210: Fix default rates for HDA clocks clk: ti: clkctrl: Fix returning uninitialized data clk: meson: meson8b: fix a typo in the VPU parent names array variable clk: meson: fix MPLL 50M binding id typo
2019-06-26clk: tegra: Do not enable PLL_RE_VCO on Tegra210Thierry Reding1-1/+0
It turns out that this PLL is not used on Tegra210, so there's no need to enable it via the init table. Remove the init table entry for this PLL to avoid it getting enabled at boot time. If the bootloader enabled it and forgot to turn it off, the common clock framework will now know to disable it because it is unused. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: tegra: Warn if an enabled PLL is in IDDQThierry Reding1-1/+5
A PLL in IDDQ doesn't work, whether it's enabled or not. This is not a configuration that makes sense, so warn about it. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: tegra: Do not warn unnecessarilyThierry Reding1-2/+3
There is no need to warn if the reference PLL is enabled with the correct defaults. Only warn if the boot values don't match the defaults. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: tegra210: fix PLLU and PLLU_OUT1JC Kuo1-4/+4
Full-speed and low-speed USB devices do not work with Tegra210 platforms because of incorrect PLLU/PLLU_OUT1 clock settings. When full-speed device is connected: [ 14.059886] usb 1-3: new full-speed USB device number 2 using tegra-xusb [ 14.196295] usb 1-3: device descriptor read/64, error -71 [ 14.436311] usb 1-3: device descriptor read/64, error -71 [ 14.675749] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 14.812335] usb 1-3: device descriptor read/64, error -71 [ 15.052316] usb 1-3: device descriptor read/64, error -71 [ 15.164799] usb usb1-port3: attempt power cycle When low-speed device is connected: [ 37.610949] usb usb1-port3: Cannot enable. Maybe the USB cable is bad? [ 38.557376] usb usb1-port3: Cannot enable. Maybe the USB cable is bad? [ 38.564977] usb usb1-port3: attempt power cycle This commit fixes the issue by: 1. initializing PLLU_OUT1 before initializing XUSB_FS_SRC clock because PLLU_OUT1 is parent of XUSB_FS_SRC. 2. changing PLLU post-divider to /2 (DIVP=1) according to Technical Reference Manual. Fixes: e745f992cf4b ("clk: tegra: Rework pll_u") Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-14clk: tegra210: Fix default rates for HDA clocksJon Hunter1-0/+2
Currently the default clock rates for the HDA and HDA2CODEC_2X clocks are both 19.2MHz. However, the default rates for these clocks should actually be 51MHz and 48MHz, respectively. The current clock settings results in a distorted output during audio playback. Correct the default clock rates for these clocks by specifying them in the clock init table for Tegra210. Cc: stable@vger.kernel.org Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner20-240/+20
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner5-49/+5
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd4-0/+4
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-10 09:37:11 +0300