summaryrefslogtreecommitdiff
path: root/drivers/clocksource/nomadik-mtu.c
AgeCommit message (Collapse)AuthorFilesLines
2023-08-28clocksource: Explicitly include correct DT includesRob Herring1-1/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Link: https://lore.kernel.org/r/20230714174409.4053843-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-07-23clocksource/drivers/nomadik-mtu: Handle 32kHz clockLinus Walleij1-2/+9
It happens on the U8420-sysclk Ux500 PRCMU firmware variant that the MTU clock is just 32768 Hz, and in this mode the minimum ticks is 5 rather than two. I think this is simply so that there is enough time for the register write to propagate through the interconnect to the registers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200628220153.67011-1-linus.walleij@linaro.org
2020-02-27clocksource: Replace setup_irq() by request_irq()afzal mohammed1-8/+3
request_irq() is preferred over setup_irq(). The early boot setup_irq() invocations happen either via 'init_IRQ()' or 'time_init()', while memory allocators are ready by 'mm_init()'. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). Seldom remove_irq() usage has been observed coupled with setup_irq(), wherever that has been found, it too has been replaced by free_irq(). A build error that was reported by kbuild test robot <lkp@intel.com> in the previous version of the patch also has been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/91961c77c1cf93d41523f5e1ac52043f32f97077.1582799709.git.afzal.mohd.ma@gmail.com
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19clocksource/drivers/ux500: Drop Ux500 custom SCHED_CLOCKLinus Walleij1-4/+0
The two drivers used for Ux500 sched_clock use two Kconfig symbols to select which of the two gets used as sched_clock. This isn't right: the workaround is trying to make sure that the NONSTOP timer is used for sched_clock in order to keep that clock ticking consistently over a suspend/resume cycle. (Otherwise sched_clock simply stops during suspend and continues after resume). This will notably affect any timetstamped debug prints, so that they show the absolute number of seconds since the system was booted and does not loose wall-clock time during suspend and resume as if time stood still. The real way to fix this problem is to make sched_clock take advantage of any NONSTOP clock source on the system and adjust accordingly, not to try to work around this by using a different sched_clock depending on what system we are compiling for. This can solve the problem for everyone instead of providing a local solution. Cc: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-14clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLAREDaniel Lezcano1-1/+1
The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the clocksource at early stage. However, this macro is also used to initialize the clockevent if any, or the clockevent only. It was originally suggested to declare another macro to initialize a clockevent, so in order to separate the two entities even they belong to the same IP. This was not accepted because of the impact on the DT where splitting a clocksource/clockevent definition does not make sense as it is a Linux concept not a hardware description. On the other side, the clocksource has not interrupt declared while the clockevent has, so it is easy from the driver to know if the description is for a clockevent or a clocksource, IOW it could be implemented at the driver level. So instead of dealing with a named clocksource macro, let's use a more generic one: TIMER_OF_DECLARE. The patch has not functional changes. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-07clocksource: Add missing line break to error messagesRafał Miłecki1-4/+4
Printing with pr_* functions requires adding line break manually. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-28clocksources: Switch back to the clksrc tableDaniel Lezcano1-1/+1
All the clocksource drivers's init function are now converted to return an error code. CLOCKSOURCE_OF_DECLARE is no longer used as well as the clksrc-of table. Let's convert back the names: - CLOCKSOURCE_OF_DECLARE_RET => CLOCKSOURCE_OF_DECLARE - clksrc-of-ret => clksrc-of Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> For exynos_mct and samsung_pwm_timer: Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> For arch/arc: Acked-by: Vineet Gupta <vgupta@synopsys.com> For mediatek driver: Acked-by: Matthias Brugger <matthias.bgg@gmail.com> For the Rockchip-part Acked-by: Heiko Stuebner <heiko@sntech.de> For STi : Acked-by: Patrice Chotard <patrice.chotard@st.com> For the mps2-timer.c and versatile.c changes: Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> For the OXNAS part : Acked-by: Neil Armstrong <narmstrong@baylibre.com> For LPC32xx driver: Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> For Broadcom Kona timer change: Acked-by: Ray Jui <ray.jui@broadcom.com> For Sun4i and Sun5i: Acked-by: Chen-Yu Tsai <wens@csie.org> For Meson6: Acked-by: Carlo Caione <carlo@caione.org> For Keystone: Acked-by: Santosh Shilimkar <ssantosh@kernel.org> For NPS: Acked-by: Noam Camus <noamca@mellanox.com> For bcm2835: Acked-by: Eric Anholt <eric@anholt.net>
2016-06-28clocksource/drivers/nomadik-mtu: Convert init function to return errorDaniel Lezcano1-16/+29
The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-08-10clockevents/drivers/nomadik-mtu: Migrate to new 'set-state' interfaceViresh Kumar1-28/+30
Migrate nomadik-mtu driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-24Merge tag 'dt-for-linus' of ↵Linus Torvalds1-18/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT and DT-conversion-related changes for various ARM platforms. Most of these are to enable various devices on various boards, etc, and not necessarily worth enumerating. New boards and systems continue to come in as new devicetree files that don't require corresponding C changes any more, which is indicating that the system is starting to work fairly well. A few things worth pointing out: * ST Ericsson ux500 platforms have made the major push to move over to fully support the platform with DT * Renesas platforms continue their conversion over from legacy platform devices to DT-based for hardware description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits) ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6 ARM: dts: sirf: add lost minigpsrtc device node ARM: dts: sirf: add clock, frequence-voltage table for CPU0 ARM: dts: sirf: add lost bus_width, clock and status for sdhci ARM: dts: sirf: add lost clocks for cphifbg ARM: dts: socfpga: add pl330 clock ARM: dts: socfpga: update L2 tag and data latency arm: sun7i: cubietruck: Enable the i2c controllers ARM: dts: add support for EXYNOS4412 based TINY4412 board ARM: dts: Add initial support for Arndale Octa board ARM: bcm2835: add USB controller to device tree ARM: dts: MSM8974: Add MMIO architected timer node ARM: dts: MSM8974: Add restart node ARM: dts: sun7i: external clock outputs ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style ARM: dts: sun7i: Add pin muxing options for clock outputs ARM: dts: sun7i: Add rtp controller node ARM: dts: sun5i: Add rtp controller node ARM: dts: sun4i: Add rtp controller node ...
2013-12-11clocksource: misc drivers: Remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch removes the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. [dlezcano] : slightly changed the changelog Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-27clksrc: delete nomadik MTU non-DT boot pathLinus Walleij1-18/+5
Both platforms using the MTU (Nomadik and Ux500) have now been converted to use device tree exclusively, thus let us delete this platform data header and make this driver a fully self-contained DT-only driver. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Lee Jones <lee.jones@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26Merge remote-tracking branch 'tip/timers/core' into ↵John Stultz1-1/+2
fordlezcano/3.13/sched-clock64-conversion Update to tip/timers/core and resolve minor conflict. Conflicts: drivers/clocksource/samsung_pwm_timer.c Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-08-22ARM: nomadik: add dynamic irq flag to the timerDaniel Lezcano1-1/+2
Add the dynamic irq affinity feature to the timer clock device. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Acked-by: Rickard Andersson <rickard.andersson@stericsson.com>
2013-07-30clocksource: nomadik: Switch to sched_clock_register()Stephen Boyd1-2/+2
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-07-07Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer core updates from Thomas Gleixner: "The timer changes contain: - posix timer code consolidation and fixes for odd corner cases - sched_clock implementation moved from ARM to core code to avoid duplication by other architectures - alarm timer updates - clocksource and clockevents unregistration facilities - clocksource/events support for new hardware - precise nanoseconds RTC readout (Xen feature) - generic support for Xen suspend/resume oddities - the usual lot of fixes and cleanups all over the place The parts which touch other areas (ARM/XEN) have been coordinated with the relevant maintainers. Though this results in an handful of trivial to solve merge conflicts, which we preferred over nasty cross tree merge dependencies. The patches which have been committed in the last few days are bug fixes plus the posix timer lot. The latter was in akpms queue and next for quite some time; they just got forgotten and Frederic collected them last minute." * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits) hrtimer: Remove unused variable hrtimers: Move SMP function call to thread context clocksource: Reselect clocksource when watchdog validated high-res capability posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting posix_timers: fix racy timer delta caching on task exit posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule() selftests: add basic posix timers selftests posix_cpu_timers: consolidate expired timers check posix_cpu_timers: consolidate timer list cleanups posix_cpu_timer: consolidate expiry time type tick: Sanitize broadcast control logic tick: Prevent uncontrolled switch to oneshot mode tick: Make oneshot broadcast robust vs. CPU offlining x86: xen: Sync the CMOS RTC as well as the Xen wallclock x86: xen: Sync the wallclock when the system time is set timekeeping: Indicate that clock was set in the pvclock gtod notifier timekeeping: Pass flags instead of multiple bools to timekeeping_update() xen: Remove clock_was_set() call in the resume path hrtimers: Support resuming with two or more CPUs online (but stopped) timer: Fix jiffies wrap behavior of round_jiffies_common() ...
2013-06-13sched_clock: Make ARM's sched_clock generic for all architecturesStephen Boyd1-1/+1
Nothing about the sched_clock implementation in the ARM port is specific to the architecture. Generalize the code so that other architectures can use it by selecting GENERIC_SCHED_CLOCK. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [jstultz: Merge minor collisions with other patches in my tree] Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-06-01ARM: nomadik: fix clocksource warningArnd Bergmann1-11/+1
The clocksource API has changed slightly, which causes a harmless warning: /git/arm-soc/drivers/clocksource/nomadik-mtu.c:259:28: warning: 'nmdk_timer_match' defined but not used [-Wunused-variable] static struct of_device_id nmdk_timer_match[] __initconst = { ^ Fortunately, the same API change also lets us simplify the code while removing the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-12clocksource: nomadik-mtu: support of probeRabin Vincent1-12/+58
Support device tree probe of the nomadik-mtu clocksource. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
2013-04-27clocksource: nomadik-mtu: fix up clocksource/timerLinus Walleij1-2/+2
The Nomadik clocksource driver has had a bad define making it impossible to use it for sched_clock() for a while. Fix this and also enable it for the Nomadik. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-27Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar. * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource : Nomadik-mtu : fix missing irq initialization posix-timer: Don't call idr_find() with out-of-range ID
2013-02-22clocksource : Nomadik-mtu : fix missing irq initializationDaniel Lezcano1-0/+1
This patch fix the clock device irq field which is not initialized. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: patches@linaro.org Cc: linus.walleij@stericsson.com Cc: john.stultz@linaro.org Link: http://lkml.kernel.org/r/1361547870-32638-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-01-29Merge branch 'depends/cleanup' into next/driversOlof Johansson1-13/+20
* depends/cleanup: (375 commits) ARM: at91: fix board-rm9200-dt after sys_timer conversion clocksource: use clockevents_config_and_register() where possible ARM: use clockevents_config_and_register() where possible clockevents: export clockevents_config_and_register for module use timer: vt8500: Move timer code to drivers/clocksource irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h ARM: picoxcell: use common irqchip_init function ARM: spear: use common irqchip_init function irqchip: Move ARM VIC to drivers/irqchip ARM: samsung: remove unused tick.h ARM: remove unneeded vic.h includes ARM: remove mach .handle_irq for VIC users ARM: VIC: set handle_arch_irq in VIC initialization ARM: VIC: shrink down vic.h irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h ARM: use common irqchip_init for GIC init irqchip: Move ARM GIC to drivers/irqchip ARM: remove mach .handle_irq for GIC users ARM: GIC: set handle_arch_irq in GIC initialization ARM: GIC: remove direct use of gic_raise_softirq ...
2013-01-07clocksource: nomadik-mtu: support timer-based delayFabio Baltieri1-0/+11
This patch adds support to use Nomadik MTU for timer-based delay. Acked-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-24ARM: ux500: convert timer suspend/resume to clock_event_deviceStephen Warren1-13/+20
Move ux500's timer suspend/resume functions from struct sys_timer ux500_timer into struct clock_event_device nmdk_clkevt. This will allow the sys_timer suspend/resume fields to be removed, and eventually lead to a complete removal of struct sys_timer. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16clocksource/mtu-nomadik: use apb_pclkUlf Hansson1-1/+7
After improving the clock tree we need to make sure the the MTU timer explicitly grabs and enables it silicon clock (pclk). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-11-05ARM: plat-nomadik: move MTU, kill plat-nomadikLinus Walleij1-0/+224
This moves the MTU timer driver from arch/arm/plat-nomadik to drivers/clocksource and moves the header file to the platform_data directory. As this moves the last file being compiled to an object out of arch/arm/plat-nomadik, we have to "turn off the light" and delete the plat-nomadik directory, because it is not allowed to have an empty Makefile in a plat-* directory. This is probably also a desired side effect of depopulating the arch/arm directory of drivers. Luckily we have just deleted all the <plat/*> include files prior to this so by moving the last one we may delete the directory. After this all the Ux500 and Nomadik device drivers live outside of the arch/arm hierarchy. Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>