| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for ACPI
- Various cleanups to the ISA string parsing, including making them
case-insensitive
- Support for the vector extension
- Support for independent irq/softirq stacks
- Our CPU DT binding now has "unevaluatedProperties: false"
* tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits)
riscv: hibernate: remove WARN_ON in save_processor_state
dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
dt-bindings: riscv: cpus: add a ref the common cpu schema
riscv: stack: Add config of thread stack size
riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
RISC-V: always report presence of extensions formerly part of the base ISA
dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
RISC-V: remove decrement/increment dance in ISA string parser
RISC-V: rework comments in ISA string parser
RISC-V: validate riscv,isa at boot, not during ISA string parsing
RISC-V: split early & late of_node to hartid mapping
RISC-V: simplify register width check in ISA string parsing
perf: RISC-V: Limit the number of counters returned from SBI
riscv: replace deprecated scall with ecall
riscv: uprobes: Restore thread.bad_cause
riscv: mm: try VMA lock-based page fault handling first
riscv: mm: Pre-allocate PGD entries for vmalloc/modules area
RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
RISC-V: Track ISA extensions per hart
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler SMP load-balancer improvements:
- Avoid unnecessary migrations within SMT domains on hybrid systems.
Problem:
On hybrid CPU systems, (processors with a mixture of
higher-frequency SMT cores and lower-frequency non-SMT cores),
under the old code lower-priority CPUs pulled tasks from the
higher-priority cores if more than one SMT sibling was busy -
resulting in many unnecessary task migrations.
Solution:
The new code improves the load balancer to recognize SMT cores
with more than one busy sibling and allows lower-priority CPUs
to pull tasks, which avoids superfluous migrations and lets
lower-priority cores inspect all SMT siblings for the busiest
queue.
- Implement the 'runnable boosting' feature in the EAS balancer:
consider CPU contention in frequency, EAS max util & load-balance
busiest CPU selection.
This improves CPU utilization for certain workloads, while leaves
other key workloads unchanged.
Scheduler infrastructure improvements:
- Rewrite the scheduler topology setup code by consolidating it into
the build_sched_topology() helper function and building it
dynamically on the fly.
- Resolve the local_clock() vs. noinstr complications by rewriting
the code: provide separate sched_clock_noinstr() and
local_clock_noinstr() functions to be used in instrumentation code,
and make sure it is all instrumentation-safe.
Fixes:
- Fix a kthread_park() race with wait_woken()
- Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
- Fix UP PREEMPT bug by unifying the SMP and UP implementations
- Fix task_struct::saved_state handling
- Fix various rq clock update bugs, unearthed by turning on the rq
clock debugging code.
- Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger
by creating enough cgroups, by removing the warnign and restricting
window size triggers to PSI file write-permission or
CAP_SYS_RESOURCE.
- Propagate SMT flags in the topology when removing degenerate domain
- Fix grub_reclaim() calculation bug in the deadline scheduler code
- Avoid resetting the min update period when it is unnecessary, in
psi_trigger_destroy().
- Don't balance a task to its current running CPU in load_balance(),
which was possible on certain NUMA topologies with overlapping
groups.
- Fix the sched-debug printing of rq->nr_uninterruptible
Cleanups:
- Address various -Wmissing-prototype warnings, as a preparation to
(maybe) enable this warning in the future.
- Remove unused code
- Mark more functions __init
- Fix shadow-variable warnings"
* tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/core: Avoid multiple calling update_rq_clock() in __cfsb_csd_unthrottle()
sched/core: Avoid double calling update_rq_clock() in __balance_push_cpu_stop()
sched/core: Fixed missing rq clock update before calling set_rq_offline()
sched/deadline: Update GRUB description in the documentation
sched/deadline: Fix bandwidth reclaim equation in GRUB
sched/wait: Fix a kthread_park race with wait_woken()
sched/topology: Mark set_sched_topology() __init
sched/fair: Rename variable cpu_util eff_util
arm64/arch_timer: Fix MMIO byteswap
sched/fair, cpufreq: Introduce 'runnable boosting'
sched/fair: Refactor CPU utilization functions
cpuidle: Use local_clock_noinstr()
sched/clock: Provide local_clock_noinstr()
x86/tsc: Provide sched_clock_noinstr()
clocksource: hyper-v: Provide noinstr sched_clock()
clocksource: hyper-v: Adjust hv_read_tsc_page_tsc() to avoid special casing U64_MAX
x86/vdso: Fix gettimeofday masking
math64: Always inline u128 version of mul_u64_u64_shr()
s390/time: Provide sched_clock_noinstr()
loongarch: Provide noinstr sched_clock_read()
...
|
|
Smatch reports:
drivers/clocksource/timer-cadence-ttc.c:529 ttc_timer_probe()
warn: 'timer_baseaddr' from of_iomap() not released on lines: 498,508,516.
timer_baseaddr may have the problem of not being released after use,
I replaced it with the devm_of_iomap() function and added the clk_put()
function to cleanup the "clk_ce" and "clk_cs".
Fixes: e932900a3279 ("arm: zynq: Use standard timer binding")
Fixes: 70504f311d4b ("clocksource/drivers/cadence_ttc: Convert init function to return error")
Signed-off-by: Feng Mingxi <m202271825@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230425065611.702917-1-m202271825@hust.edu.cn
|
|
Current code assigns either the Hyper-V TSC page or MSR-based ref counter
as the sched clock. This may be sub-optimal in two cases. First, if there
is hardware support to ensure consistent TSC frequency across live
migrations and Hyper-V is using that support, the raw TSC is a faster
source of time than the Hyper-V TSC page. Second, the MSR-based ref
counter is relatively slow because reads require a trap to the hypervisor.
As such, it should never be used as the sched clock. The native sched
clock based on the raw TSC or jiffies is much better.
Rework the sched clock setup so it is set to the TSC page only if
Hyper-V indicates that the TSC may have inconsistent frequency across
live migrations. Also, remove the code that sets the sched clock to
the MSR-based ref counter. In the cases where it is not set, the sched
clock will then be the native sched clock.
As part of the rework, always enable both the TSC page clocksource and
the MSR-based ref counter clocksource. Set the ratings so the TSC page
clocksource is preferred. While the MSR-based ref counter clocksource
is unlikely to ever be the default, having it available for manual
selection is convenient for development purposes.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1687201360-16003-1-git-send-email-mikelley@microsoft.com
|
|
Only the imx-gpt timer driver makes use of enum imx_gpt_type that is
otherwise unused. Move its definition into the timer-imx-gpt driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230328100531.879485-3-u.kleine-koenig@pengutronix.de
|
|
When looking at the data structs defining the different behaviours of
the GPT blocks in different SoCs it's not helpful that the same
functions are used with different names.
So drop the cpp defines and use the original names.
This commit was generated using:
perl -i -e 'my %m; while (<>) { if (/^#define (imx[a-zA-Z0-6_]*)\s(imx[a-zA-Z0-6_]*)/) {$m{$1} = $2; } else { foreach my $f (keys %m) {s/$f/$m{$f}/; } print; } }' drivers/clocksource/timer-imx-gpt.c
This patch has no effect on the generated code.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230328091514.874724-1-u.kleine-koenig@pengutronix.de
|
|
This patch moves most part of arch/mips/loongson32/common/time.c
into drivers/clocksource.
Adapt the driver to clocksource framework with devicetree support
and updates Kconfig/Makefile options.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230512103724.587760-4-keguang.zhang@gmail.com
|
|
The use of the pm_sleep_ptr() macro allows the compiler to always see
the dev_pm_ops structure and related functions, while still allowing the
unused code to be removed, without the need for the __maybe_unused
markings.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230618153937.96649-1-paul@crapouillou.net
|
|
The readl_relaxed() to __raw_readl() change meant to loose the
instrumentation, but also (inadvertently) lost the byteswap.
Fixes: 24ee7607b286 ("arm64/arch_timer: Provide noinstr sched_clock_read() functions")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20230606080614.GB905437@hirez.programming.kicks-ass.net
|
|
With the intent to provide local_clock_noinstr(), a variant of
local_clock() that's safe to be called from noinstr code (with the
assumption that any such code will already be non-preemptible),
prepare for things by making the Hyper-V TSC and MSR sched_clock
implementations noinstr.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.843039089@infradead.org
|
|
U64_MAX
Currently hv_read_tsc_page_tsc() (ab)uses the (valid) time value of
U64_MAX as an error return. This breaks the clean wrap-around of the
clock.
Modify the function signature to return a boolean state and provide
another u64 pointer to store the actual time on success. This obviates
the need to steal one time value and restores the full counter width.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.775630881@infradead.org
|
|
With the intent to provide local_clock_noinstr(), a variant of
local_clock() that's safe to be called from noinstr code (with the
assumption that any such code will already be non-preemptible),
prepare for things by providing a noinstr sched_clock_read() function.
Specifically, preempt_enable_*() calls out to schedule(), which upsets
noinstr validation efforts.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.435618812@infradead.org
|
|
Initialize the timer driver based on RHCT table on ACPI based
platforms.
Currently, ACPI doesn't support a flag to indicate that the
timer interrupt can wake up the cpu irrespective of its
power state. It will be added in future update.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-19-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Refactor the timer init function such that few things can be
shared by both DT and ACPI based platforms.
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-18-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more timer updates from Thomas Gleixner:
"Timekeeping and clocksource/event driver updates the second batch:
- A trivial documentation fix in the timekeeping core
- A really boring set of small fixes, enhancements and cleanups in
the drivers code. No new clocksource/clockevent drivers for a
change"
* tag 'timers-core-2023-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix references to nonexistent ktime_get_fast_ns()
dt-bindings: timer: rockchip: Add rk3588 compatible
dt-bindings: timer: rockchip: Drop superfluous rk3288 compatible
clocksource/drivers/ti: Use of_property_read_bool() for boolean properties
clocksource/drivers/timer-ti-dm: Fix finding alwon timer
clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails
clocksource/drivers/stm32-lp: Drop of_match_ptr for ID table
clocksource/drivers/timer-ti-dm: Convert to platform remove callback returning void
clocksource/drivers/timer-tegra186: Convert to platform remove callback returning void
clocksource/drivers/timer-ti-dm: Improve error message in .remove
clocksource/drivers/timer-stm32-lp: Mark driver as non-removable
clocksource/drivers/sh_mtu2: Mark driver as non-removable
clocksource/drivers/timer-ti-dm: Use of_address_to_resource()
clocksource/drivers/timer-imx-gpt: Remove non-DT function
clocksource/drivers/timer-mediatek: Split out CPUXGPT timers
clocksource/drivers/exynos_mct: Explicitly return 0 for shared timer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- PCI passthrough for Hyper-V confidential VMs (Michael Kelley)
- Hyper-V VTL mode support (Saurabh Sengar)
- Move panic report initialization code earlier (Long Li)
- Various improvements and bug fixes (Dexuan Cui and Michael Kelley)
* tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg
Drivers: hv: move panic report code from vmbus to hv early init code
x86/hyperv: VTL support for Hyper-V
Drivers: hv: Kconfig: Add HYPERV_VTL_MODE
x86/hyperv: Make hv_get_nmi_reason public
x86/hyperv: Add VTL specific structs and hypercalls
x86/init: Make get/set_rtc_noop() public
x86/hyperv: Exclude lazy TLB mode CPUs from enlightened TLB flushes
x86/hyperv: Add callback filter to cpumask_to_vpset()
Drivers: hv: vmbus: Remove the per-CPU post_msg_page
clocksource: hyper-v: make sure Invariant-TSC is used if it is available
PCI: hv: Enable PCI pass-thru devices in Confidential VMs
Drivers: hv: Don't remap addresses that are above shared_gpa_boundary
hv_netvsc: Remove second mapping of send and recv buffers
Drivers: hv: vmbus: Remove second way of mapping ring buffers
Drivers: hv: vmbus: Remove second mapping of VMBus monitor pages
swiotlb: Remove bounce buffer remapping for Hyper-V
Driver: VMBus: Add Devicetree support
dt-bindings: bus: Add Hyper-V VMBus
Drivers: hv: vmbus: Convert acpi_device to more generic platform_device
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230310144702.1541660-1-robh@kernel.org
|
|
Clean-up commit b6999fa1c847 ("clocksource/drivers/timer-ti-dm: Use
of_address_to_resource()") caused a regression where pa is never set
making all related SoCs fail to boot. Let's fix this by setting pa
if found.
Fixes: b6999fa1c847 ("clocksource/drivers/timer-ti-dm: Use of_address_to_resource()")
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230412064142.12726-1-tony@atomide.com
|
|
init fails
Smatch reports:
drivers/clocksource/timer-davinci.c:332 davinci_timer_register()
warn: 'base' from ioremap() not released on lines: 274.
Fix this and other potential memory leak problems
by adding a set of corresponding exit lables.
Fixes: 721154f972aa ("clocksource/drivers/davinci: Add support for clockevents")
Signed-off-by: Qinrun Dai <flno@hust.edu.cn>
Link: https://lore.kernel.org/r/20230413135037.1505799-1-flno@hust.edu.cn
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/clocksource/timer-stm32-lp.c:203:34: error: ‘stm32_clkevent_lp_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230311173803.263446-1-krzysztof.kozlowski@linaro.org
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-6-u.kleine-koenig@pengutronix.de
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-5-u.kleine-koenig@pengutronix.de
|
|
If a platform driver's remove callback returns an error code, the driver
core emits a generic (and thus little helpful) error message.
Instead emit a more specifc error message about the actual error and
return zero to suppress the core's message.
Note that returning zero has no side effects apart from not emitting
said error message. This prepares converting platform driver's remove
message to return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-4-u.kleine-koenig@pengutronix.de
|
|
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind an stm32-lp device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
[dlezcano] : Fixed up the wrong function removed
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-3-u.kleine-koenig@pengutronix.de
|
|
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a sh_tmu2 device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-2-u.kleine-koenig@pengutronix.de
|
|
Replace of_get_address() and of_translate_address() calls with single
call to of_address_to_resource().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230319163220.226273-1-robh@kernel.org
|
|
mxc_timer_init() was originally only used by non-DT i.MX platforms.
i.MX has already been converted to be a DT-only platform.
Remove the unused mxc_timer_init() function.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230307124313.708255-1-festevam@denx.de
|
|
On MediaTek platforms, CPUXGPT is the source for the AArch64 System
Timer, read through CNTVCT_EL0.
The handling for starting this timer ASAP was introduced in commit
327e93cf9a59 ("clocksource/drivers/timer-mediatek: Implement CPUXGPT timers")
which description also contains an important full explanation of the
reasons why this driver is necessary and cannot be a module.
In preparation for an eventual conversion of timer-mediatek to a
platform_driver that would be possibly built as a module, split out
the CPUXGPT timers driver to a new timer-mediatek-cpux.c driver.
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Walter Chang <walter.chang@mediatek.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230309103913.116775-1-angelogioacchino.delregno@collabora.com
|
|
For a shared timers, the mct_init_dt() should not initialize the clock
even with global comparator. This is not an error, thus the function
should simply return 0, not 'ret'.
This also fixes smatch warning:
drivers/clocksource/exynos_mct.c:635 mct_init_dt() warn: missing error code? 'ret'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202304021446.46XVKag0-lkp@intel.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230403094017.9556-1-krzysztof.kozlowski@linaro.org
|
|
If Hyper-V TSC page is unavailable and Invariant-TSC is available,
currently hyperv_cs_msr (rather than Invariant-TSC) is used by default.
Use Invariant-TSC by default by downgrading hyperv_cs_msr.rating in
hv_init_tsc_clocksource(), if Invariant-TSC is available.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230408210339.15085-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Add a placeholder function for the hv_setup_stimer0_irq API to accommodate
systems without ACPI support. Since this function is not utilized on
x86/x64 systems and non-ACPI support is only intended for x86/x64 systems,
a placeholder function is sufficient for now and can be improved upon if
necessary in the future.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1679298460-11855-2-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Removing include of cpu.h from of_device.h (included by of_platform.h)
causes an error in ingenic-timer:
drivers/clocksource/ingenic-timer.c: In function ‘ingenic_tcu_init’:
drivers/clocksource/ingenic-timer.c:338:15: error: implicit declaration of function ‘cpuhp_setup_state’
The of_platform.h header is not necessary either, so it and of_address.h
can be dropped.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-11-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
To do remote FENCEs (i.e. remote TLB flushes) using IPI calls on the
RISC-V kernel, we need hardware mechanism to directly inject IPI from
the supervisor mode (i.e. RISC-V kernel) instead of using SBI calls.
The upcoming AIA IMSIC devices allow direct IPI injection from the
supervisor mode (i.e. RISC-V kernel). To support this, we extend the
riscv_ipi_set_virq_range() function so that IPI provider (i.e. irqchip
drivers can mark IPIs as suitable for remote FENCEs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-5-apatel@ventanamicro.com
|
|
Currently, the RISC-V kernel provides arch specific hooks (i.e.
struct riscv_ipi_ops) to register IPI handling methods. The stats
gathering of IPIs is also arch specific in the RISC-V kernel.
Other architectures (such as ARM, ARM64, and MIPS) have moved away
from custom arch specific IPI handling methods. Currently, these
architectures have Linux irqchip drivers providing a range of Linux
IRQ numbers to be used as IPIs and IPI triggering is done using
generic IPI APIs. This approach allows architectures to treat IPIs
as normal Linux IRQs and IPI stats gathering is done by the generic
Linux IRQ subsystem.
We extend the RISC-V IPI handling as-per above approach so that arch
specific IPI handling methods (struct riscv_ipi_ops) can be removed
and the IPI handling is done through the Linux IRQ subsystem.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-4-apatel@ventanamicro.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timekeeping, timers and clockevent/source drivers:
Core:
- Yet another round of improvements to make the clocksource watchdog
more robust:
- Relax the clocksource-watchdog skew criteria to match the NTP
criteria.
- Temporarily skip the watchdog when high memory latencies are
detected which can lead to false-positives.
- Provide an option to enable TSC skew detection even on systems
where TSC is marked as reliable.
Sigh!
- Initialize the restart block in the nanosleep syscalls to be
directed to the no restart function instead of doing a partial
setup on entry.
This prevents an erroneous restart_syscall() invocation from
corrupting user space data. While such a situation is clearly a
user space bug, preventing this is a correctness issue and caters
to the least suprise principle.
- Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout()
to align it with the nanosleep semantics.
Drivers:
- The obligatory new driver bindings for Mediatek, Rockchip and
RISC-V variants.
- Add support for the C3STOP misfeature to the RISC-V timer to handle
the case where the timer stops in deeper idle state.
- Set up a static key in the RISC-V timer correctly before first use.
- The usual small improvements and fixes all over the place"
* tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/timer-sun4i: Add CLOCK_EVT_FEAT_DYNIRQ
clocksource/drivers/em_sti: Mark driver as non-removable
clocksource/drivers/sh_tmu: Mark driver as non-removable
clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use
clocksource/drivers/timer-microchip-pit64b: Add delay timer
clocksource/drivers/timer-microchip-pit64b: Select driver only on ARM
dt-bindings: timer: sifive,clint: add comaptibles for T-Head's C9xx
dt-bindings: timer: mediatek,mtk-timer: add MT8365
clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback
clocksource/drivers/sh_cmt: Mark driver as non-removable
clocksource/drivers/timer-microchip-pit64b: Drop obsolete dependency on COMPILE_TEST
clocksource/drivers/riscv: Increase the clock source rating
clocksource/drivers/timer-riscv: Set CLOCK_EVT_FEAT_C3STOP based on DT
dt-bindings: timer: Add bindings for the RISC-V timer device
RISC-V: time: initialize hrtimer based broadcast clock event device
dt-bindings: timer: rk-timer: Add rktimer for rv1126
time/debug: Fix memory leak with using debugfs_lookup()
clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested
posix-timers: Use atomic64_try_cmpxchg() in __update_gt_cputime()
clocksource: Verify HPET and PMTMR when TSC unverified
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into timers/core
Pull clocksource watchdog changes from Paul McKenney:
o Improvements to clocksource-watchdog console messages.
o Loosening of the clocksource-watchdog skew criteria to match
those of NTP (500 parts per million, relaxed from 400 parts
per million). If it is good enough for NTP, it is good enough
for the clocksource watchdog.
o Suspend clocksource-watchdog checking temporarily when high
memory latencies are detected. This avoids the false-positive
clock-skew events that have been seen on production systems
running memory-intensive workloads.
o On systems where the TSC is deemed trustworthy, use it as the
watchdog timesource, but only when specifically requested using
the tsc=watchdog kernel boot parameter. This permits clock-skew
events to be detected, but avoids forcing workloads to use the
slow HPET and ACPI PM timers. These last two timers are slow
enough to cause systems to be needlessly marked bad on the one
hand, and real skew does sometimes happen on production systems
running production workloads on the other. And sometimes it is
the fault of the TSC, or at least of the firmware that told the
kernel to program the TSC with the wrong frequency.
o Add a tsc=revalidate kernel boot parameter to allow the kernel
to diagnose cases where the TSC hardware works fine, but was told
by firmware to tick at the wrong frequency. Such cases are rare,
but they really have happened on production systems.
Link: https://lore.kernel.org/r/20230210193640.GA3325193@paulmck-ThinkPad-P17-Gen-1
|
|
Add CLOCK_EVT_FEAT_DYNIRQ to allow the IRQ could be runtime set affinity
to the cores that needs wake up, otherwise saying core0 has to send
IPI to wakeup core1. With CLOCK_EVT_FEAT_DYNIRQ set, when broadcast
timer could wake up the cores, IPI is not needed.
After enabling this feature, especially the scene where cpuidle is
enabled can benefit.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230209040239.24710-1-frank.li@vivo.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a em_sti device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230207193010.469495-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a sh_tmu device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230207193614.472060-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
A static key is used to select between SBI and Sstc timer usage in
riscv_clock_next_event(), but currently the direction is resolved
after cpuhp_setup_state() is called (which sets the next event). The
first event will therefore fall through the sbi_set_timer() path; this
breaks Sstc-only systems. So, apply the jump patching before first
use.
Fixes: 9f7a8ff6391f ("RISC-V: Prefer sstc extension if available")
Signed-off-by: Matt Evans <mev@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/CDDAB2D0-264E-42F3-8E31-BA210BEB8EC1@rivosinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add delay timer.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230203130537.1921608-3-claudiu.beznea@microchip.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Microchip PIT64B is currently available on ARM based devices. Thus
select it only for ARM. This allows implementing delay timer.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230203130537.1921608-2-claudiu.beznea@microchip.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Having a clocksource_arch_init() callback always sets vdso_clock_mode to
VDSO_CLOCKMODE_ARCHTIMER if GENERIC_GETTIMEOFDAY is enabled, this is
required for the riscv-timer.
This works for platforms where just riscv-timer clocksource is present.
On platforms where other clock sources are available we want them to
register with vdso_clock_mode set to VDSO_CLOCKMODE_NONE.
On the Renesas RZ/Five SoC OSTM block can be used as clocksource [0], to
avoid multiple clock sources being registered as VDSO_CLOCKMODE_ARCHTIMER
move setting of vdso_clock_mode in the riscv-timer driver instead of doing
this in clocksource_arch_init() callback as done similarly for ARM/64
architecture.
[0] drivers/clocksource/renesas-ostm.c
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221229224601.103851-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a sh_cmt device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230123220221.48164-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
COMPILE_TEST
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230121182911.4e47a5ff@endymion.delvare
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
