| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* pm-sleep:
PM: sleep: Restore asynchronous device resume optimization
* pm-cpufreq:
Documentation: admin-guide: PM: Fix two typos
cpufreq: intel_pstate: Update hybrid scaling factor for Meteor Lake
* pm-qos:
PM: QoS: Use kcalloc() instead of kzalloc()
|
|
On some Meteor Lake platforms, maximum one core turbo frequency is not
observed. During hybrid performance to frequency conversion, the maximum
frequency is 100 MHz less. This results in requesting maximum frequency
100 MHz less.
For example when the max one core turbo is 4.9 GHz:
MSR HWP_CAPABILITIES shows highest performance ratio for P-core is 0x3E.
With the current scaling factor of 78741 (1.27x for converting frequency
to performance) results in max frequency of 4.8 GHz. This results in
capping the max scaling frequency as 4.8 GHz, which is 100 MHz less than
the desired.
Add capability to define per CPU model specific scaling factor and define
scaling factor of 80000 (1.25x for converting frequency to performance for
P-cores) for Meteor Lake.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Debug message adjustment, subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for new processors (Sierra Forest, Grand Ridge and
Meteor Lake) to the intel_idle driver, make intel_pstate run on
Emerald Rapids without HWP support and adjust it to utilize EPP values
supplied by the platform firmware, fix issues, clean up code and
improve documentation.
The most significant fix addresses deadlocks in the core system-wide
resume code that occur if async_schedule_dev() attempts to run its
argument function synchronously (for example, due to a memory
allocation failure). It rearranges the code in question which may
increase the system resume time in some cases, but this basically is a
removal of a premature optimization. That optimization will be added
back later, but properly this time.
Specifics:
- Add support for the Sierra Forest, Grand Ridge and Meteorlake SoCs
to the intel_idle cpuidle driver (Artem Bityutskiy, Zhang Rui)
- Do not enable interrupts when entering idle in the haltpoll cpuidle
driver (Borislav Petkov)
- Add Emerald Rapids support in no-HWP mode to the intel_pstate
cpufreq driver (Zhenguo Yao)
- Use EPP values programmed by the platform firmware as balanced
performance ones by default in intel_pstate (Srinivas Pandruvada)
- Add a missing function return value check to the SCMI cpufreq
driver to avoid unexpected behavior (Alexandra Diupina)
- Fix parameter type warning in the armada-8k cpufreq driver (Gregory
CLEMENT)
- Rework trans_stat_show() in the devfreq core code to avoid buffer
overflows (Christian Marangi)
- Synchronize devfreq_monitor_[start/stop] so as to prevent a timer
list corruption from occurring when devfreq governors are switched
frequently (Mukesh Ojha)
- Fix possible deadlocks in the core system-wide PM code that occur
if device-handling functions cannot be executed asynchronously
during resume from system-wide suspend (Rafael J. Wysocki)
- Clean up unnecessary local variable initializations in multiple
places in the hibernation code (Wang chaodong, Li zeming)
- Adjust core hibernation code to avoid missing wakeup events that
occur after saving an image to persistent storage (Chris Feng)
- Update hibernation code to enforce correct ordering during image
compression and decompression (Hongchen Zhang)
- Use kmap_local_page() instead of kmap_atomic() in copy_data_page()
during hibernation and restore (Chen Haonan)
- Adjust documentation and code comments to reflect recent tasks
freezer changes (Kevin Hao)
- Repair excess function parameter description warning in the
hibernation image-saving code (Randy Dunlap)
- Fix _set_required_opps when opp is NULL (Bryan O'Donoghue)
- Use device_get_match_data() in the OPP code for TI (Rob Herring)
- Clean up OPP level and other parts and call dev_pm_opp_set_opp()
recursively for required OPPs (Viresh Kumar)"
* tag 'pm-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
OPP: Rename 'rate_clk_single'
OPP: Pass rounded rate to _set_opp()
OPP: Relocate dev_pm_opp_sync_regulators()
PM: sleep: Fix possible deadlocks in core system-wide PM code
OPP: Move dev_pm_opp_icc_bw to internal opp.h
async: Introduce async_schedule_dev_nocall()
async: Split async_schedule_node_domain()
cpuidle: haltpoll: Do not enable interrupts when entering idle
OPP: Fix _set_required_opps when opp is NULL
OPP: The level field is always of unsigned int type
PM: hibernate: Repair excess function parameter description warning
PM: sleep: Remove obsolete comment from unlock_system_sleep()
cpufreq: intel_pstate: Add Emerald Rapids support in no-HWP mode
Documentation: PM: Adjust freezing-of-tasks.rst to the freezer changes
PM: hibernate: Use kmap_local_page() in copy_data_page()
intel_idle: add Sierra Forest SoC support
intel_idle: add Grand Ridge SoC support
PM / devfreq: Synchronize devfreq_monitor_[start/stop]
cpufreq: armada-8k: Fix parameter type warning
PM: hibernate: Enforce ordering during image compression/decompression
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm-cpufreq
Merge ARM cpufreq updates for 6.8 from Viresh Kumar:
"- Check return value of a function in SCMI cpufreq driver (Alexandra
Diupina).
- Use 'NULL' instead of '0' in Armada cpufreq driver (Gregory
CLEMENT)."
* tag 'cpufreq-arm-updates-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: armada-8k: Fix parameter type warning
cpufreq: scmi: process the result of devm_of_clk_add_hw_provider()
|
|
Move and rename cppc_cpufreq_perf_to_khz() and cppc_cpufreq_khz_to_perf() to
use them outside cppc_cpufreq in topology_init_cpu_capacity_cppc().
Modify the interface to use struct cppc_perf_caps *caps instead of
struct cppc_cpudata *cpu_data as we only use the fields of cppc_perf_caps.
cppc_cpufreq was converting the lowest and nominal freq from MHz to kHz
before using them. We move this conversion inside cppc_perf_to_khz and
cppc_khz_to_perf to make them generic and usable outside cppc_cpufreq.
No functional change
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20231211104855.558096-6-vincent.guittot@linaro.org
|
|
cpuinfo.max_freq can change at runtime because of boost as an example. This
implies that the value could be different from the frequency that has been
used to compute the capacity of a CPU.
The new arch_scale_freq_ref() returns a fixed and coherent frequency
that can be used to compute the capacity for a given frequency.
[ Also fix a arch_set_freq_scale() newline style wart in <linux/cpufreq.h>. ]
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20231211104855.558096-3-vincent.guittot@linaro.org
|
|
Users may disable HWP in firmware, in which case intel_pstate will give up
unless the CPU model is explicitly supported.
See also the following past commits:
- commit df51f287b5de ("cpufreq: intel_pstate: Add Sapphire Rapids support
in no-HWP mode")
- commit d8de7a44e11f ("cpufreq: intel_pstate: Add Skylake servers support")
- commit 706c5328851d ("cpufreq: intel_pstate: Add Cometlake support in
no-HWP mode")
- commit fbdc21e9b038 ("cpufreq: intel_pstate: Add Icelake servers support in
no-HWP mode")
- commit 71bb5c82aaae ("cpufreq: intel_pstate: Add Tigerlake support in
no-HWP mode")
Signed-off-by: Zhenguo Yao <yaozhenguo1@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The second parameter of clk_get() is of type 'const char *', so use
NULL instead of the integer 0 to resolve a sparse warning:
drivers/cpufreq/armada-8k-cpufreq.c:60:40: warning: Using plain integer as NULL pointer
drivers/cpufreq/armada-8k-cpufreq.c:168:40: warning: Using plain integer as NULL pointer
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
devm_of_clk_add_hw_provider() may return an errno, so
add a return value check
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8410e7f3b31e ("cpufreq: scmi: Fix OPP addition failure with a dummy clock provider")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The platform firmware can provide a balance performance EPP value by
enabling HWP and programming the EPP to the desired value.
However, currently this only takes effect for processors listed in
intel_epp_balance_perf[], so in order to enable a new processor model
to utilize this mechanism, that table needs to be updated. It arguably
should not be necessary to modify the kernel to work properly with
every new generation of processors, though, and distributions that don't
always ship the most recent kernels should be able to run reasonably well
on new hardware without code changes.
For this reason, move the check to avoid updating the EPP when the balance
performance EPP is unmodified from the power-up default of 0x80 after the
check that allows the firmware-provided balance performance EPP value to
be retrieved. This will cause the code to always look for the firmware-
provided value before consulting intel_epp_balance_perf[] and the handling
of new hardware will not depend on whether or not that thable has been
updated yet.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
show_energy_performance_available_preferences() to show only supported
values which is performance in performance governor policy.
-------Before--------
$ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_driver
amd-pstate-epp
$ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
performance
$ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_preference
performance
$ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_available_preferences
default performance balance_performance balance_power power
-------After--------
$ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_driver
amd-pstate-epp
$ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
performance
$ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_preference
performance
$ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_available_preferences
performance
Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Suggested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Ayush Jain <ayush.jain3@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When amd_pstate is running, writing to scaling_min_freq and
scaling_max_freq has no effect. These values are only passed to the
policy level, but not to the platform level. This means that the
platform does not know about the frequency limits set by the user.
To fix this, update the min_perf and max_perf values at the platform
level whenever the user changes the scaling_min_freq and scaling_max_freq
values.
Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
cpufreq_driver->fast_switch() callback expects a frequency as a return
value. amd_pstate_fast_switch() was returning the return value of
amd_pstate_update_freq(), which only indicates a success or failure.
Fix this by making amd_pstate_fast_switch() return the target_freq
when the call to amd_pstate_update_freq() is successful, and return
the current frequency from policy->cur when the call to
amd_pstate_update_freq() is unsuccessful.
Fixes: 4badf2eb1e98 ("cpufreq: amd-pstate: Add ->fast_switch() callback")
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Cc: 6.4+ <stable@vger.kernel.org> # v6.4+
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
>From the Linux point of view, the power domains used by the CPU must
stay always-on. This is because we still need the CPU to keep running
until the last instruction, which will typically be a firmware call that
shuts down the CPU cleanly.
At the moment the power domain votes (enable + performance state) are
dropped during system suspend, which means the CPU could potentially
malfunction while entering suspend.
We need to distinguish between two different setups used with
qcom-cpufreq-nvmem:
1. CPR power domain: The backing regulator used by CPR should stay
always-on in Linux; it is typically disabled automatically by
hardware when the CPU enters a deep idle state. However, we
should pause the CPR state machine during system suspend.
2. RPMPD: The power domains used by the CPU should stay always-on
in Linux (also across system suspend). The CPU typically only
uses the *_AO ("active-only") variants of the power domains in
RPMPD. For those, the RPM firmware will automatically drop
the votes internally when the CPU enters a deep idle state.
Make this work correctly by calling device_set_awake_path() on the
virtual genpd devices, so that the votes are maintained across system
suspend. The power domain drivers need to set GENPD_FLAG_ACTIVE_WAKEUP
to opt into staying on during system suspend.
For now we only set this for the RPMPD case. For CPR, not setting it
will ensure the state machine is still paused during system suspend,
while the backing regulator will stay on with "regulator-always-on".
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The genpd core caches performance state votes from devices that are
runtime suspended as of commit 3c5a272202c2 ("PM: domains: Improve
runtime PM performance state handling"). They get applied once the
device becomes active again.
To attach the power domains needed by qcom-cpufreq-nvmem the OPP core
calls genpd_dev_pm_attach_by_id(). This results in "virtual" dummy
devices that use runtime PM only to control the enable and performance
state for the attached power domain.
However, at the moment nothing ever resumes the virtual devices created
for qcom-cpufreq-nvmem. They remain permanently runtime suspended. This
means that performance state votes made during cpufreq scaling get
always cached and never applied to the hardware.
Fix this by enabling the devices after attaching them.
Without this fix performance states votes are silently ignored, and the
CPU/CPR voltage is never adjusted. This has been broken since 5.14 but
for some reason no one noticed this on QCS404 so far.
Fixes: 1cb8339ca225 ("cpufreq: qcom: Add support for qcs404 on nvmem driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
For a 900MHz i.MX6ULL CPU the 792MHz OPP is disabled. There is no
convincing reason to disable this OPP. If a CPU can run at 900MHz,
it should also be able to cope with 792MHz. Looking at the voltage
level of 792MHz in [1] (page 24, table 10. "Operating Ranges") the
current defined OPP is above the minimum. So the voltage level
shouldn't be a problem. However in [2] (page 24, table 10.
"Operating Ranges"), it is not mentioned that 792MHz OPP isn't
allowed. Change it to only disable 792MHz OPP for i.MX6ULL types
below 792 MHz.
[1] https://www.nxp.com/docs/en/data-sheet/IMX6ULLIEC.pdf
[2] https://www.nxp.com/docs/en/data-sheet/IMX6ULLCEC.pdf
Fixes: 0aa9abd4c212 ("cpufreq: imx6q: check speed grades for i.MX6ULL")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
[ Viresh: Edited subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Merge branch 'pm-cpufreq'
Merge additional Qualcomm cpufreq driver updates for 6.7-rc1:
- Add support for several Qualcomm SoC versions (Robert Marko,
Varadarajan Narayanan).
* pm-cpufreq:
cpufreq: qcom-nvmem: Introduce cpufreq for ipq95xx
cpufreq: qcom-nvmem: Enable cpufreq for ipq53xx
cpufreq: qcom-nvmem: add support for IPQ8074
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq updates for 6.7 (part 2) from Viresh kumar:
"- Add support for several Qualcomm SoC versions (Robert Marko and
Varadarajan Narayanan)."
* tag 'cpufreq-arm-updates-6.7-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-nvmem: Introduce cpufreq for ipq95xx
cpufreq: qcom-nvmem: Enable cpufreq for ipq53xx
cpufreq: qcom-nvmem: add support for IPQ8074
soc: qcom: socinfo: Add IDs for IPQ8174 family
dt-bindings: arm: qcom,ids: Add IDs for IPQ8174 family
dt-bindings: qcom: geni-se: Allow dma-coherent
soc: qcom: socinfo: Add SoC ID for QCM6490
dt-bindings: arm: qcom,ids: Add SoC ID for QCM6490
soc: qcom: socinfo: Add SM8550-adjacent PMICs
soc: qcom: wcnss_ctrl: Remove redundant initialization owner in wcnss_ctrl_driver
soc: qcom: socinfo: Add Soc ID for SM7150P
dt-bindings: arm: qcom,ids: Add Soc ID for SM7150P
firmware: Add support for Qualcomm UEFI Secure Application
firmware: qcom_scm: Add support for Qualcomm Secure Execution Environment SCM interface
lib/ucs2_string: Add UCS-2 strscpy function
|
|
IPQ95xx SoCs have different OPPs available for the CPU based on
the SoC variant. This can be determined from an eFuse register
present in the silicon.
Added support for ipq95xx on nvmem driver which helps to
determine OPPs at runtime based on the eFuse register which
has the CPU frequency limits. opp-supported-hw dt binding
can be used to indicate the available OPPs for each limit.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Praveenkumar I <ipkumar@codeaurora.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
[ Viresh: Fixed subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
IPQ53xx have different OPPs available for the CPU based on
SoC variant. This can be determined through use of an eFuse
register present in the silicon.
Added support for ipq53xx on nvmem driver which helps to
determine OPPs at runtime based on the eFuse register which
has the CPU frequency limits. opp-supported-hw dt binding
can be used to indicate the available OPPs for each limit.
nvmem driver also creates the "cpufreq-dt" platform_device after
passing the version matching data to the OPP framework so that the
cpufreq-dt handles the actual cpufreq implementation.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
[ Viresh: Fixed subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
IPQ8074 comes in 3 families:
* IPQ8070A/IPQ8071A (Acorn) up to 1.4GHz
* IPQ8172/IPQ8173/IPQ8174 (Oak) up to 1.4GHz
* IPQ8072A/IPQ8074A/IPQ8076A/IPQ8078A (Hawkeye) up to 2.2GHz
So, in order to be able to share one OPP table lets add support for IPQ8074
family based of SMEM SoC ID-s as speedbin fuse is always 0 on IPQ8074.
IPQ8074 compatible is blacklisted from DT platdev as the cpufreq device
will get created by NVMEM CPUFreq driver.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[ Viresh: Fixed rebase conflict. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add new hardware support (new Qualcomm SoC versions in cpufreq,
RK3568/RK3588 in devfreq), extend the OPP (operating performance
points) framework, improve cpufreq governors, fix issues and clean up
code (most of the changes are in cpufreq and devfreq).
Specifics:
- Add support for several Qualcomm SoC versions and other similar
changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil
Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan
Gerhold and Varadarajan Narayanan)
- Clean up the tegra cpufreq driver (Sumit Gupta)
- Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob
Herring)
- Add support for TI's am62p5 Soc (Bryan Brattlof)
- Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian
Fainelli)
- Update Kconfig to mention i.MX7 as well (Alexander Stein)
- Revise global turbo disable check in intel_pstate (Srinivas
Pandruvada)
- Carry out initialization of sg_cpu in the schedutil cpufreq
governor in one loop (Liao Chang)
- Simplify the condition for storing 'down_threshold' in the
conservative cpufreq governor (Liao Chang)
- Use fine-grained mutex in the userspace cpufreq governor (Liao
Chang)
- Move is_managed indicator in the userspace cpufreq governor into a
per-policy structure (Liao Chang)
- Rebuild sched-domains when removing cpufreq driver (Pierre Gondois)
- Fix buffer overflow detection in trans_stats() (Christian Marangi)
- Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs to
support specific devices like UFS which handle multiple clocks
through OPP (Operating Performance Point) framework (Manivannan
Sadhasivam)
- Add perf support to the Rockchip DFI (DDR Monitor Module) devfreq-
event driver:
* Generalize rockchip-dfi.c to support new RK3568/RK3588 using
different DDR type (Sascha Hauer).
* Convert DT binding document format to yaml (Sascha Hauer).
* Add perf support for DFI (a unit suitable for measuring DDR
utilization) to rockchip-dfi.c to extend DFI usage (Sascha
Hauer)
- Add locking to the OPP handling code in the Mediatek CCI devfreq
driver, because the voltage of shared OPP might be changed by
multiple drivers (Mark Tseng, Dan Carpenter)
- Use device_get_match_data() in the Samsung Exynos PPMU
devfreq-event driver (Rob Herring)
- Extend support for the opp-level beyond required-opps (Ulf Hansson)
- Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru)
- dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm
Krait SoCs and document named opp-microvolt property (Bjorn
Andersson, Dmitry Baryshkov and Christian Marangi)
- Fix -Wunsequenced warning _of_add_opp_table_v1() (Nathan
Chancellor)
- General cleanup of OPP code (Viresh Kumar)
- Use __get_safe_page() rather than touching the list in hibernation
snapshot code (Brian Geffon)
- Fix symbol export for _SIMPLE_ variants of _PM_OPS() (Raag Jadav)
- Clean up sync_read handling in snapshot_write_next() (Brian Geffon)
- Fix kerneldoc comments for swsusp_check() and swsusp_close() to
better match code (Christoph Hellwig)
- Downgrade BIOS locked limits pr_warn() in the Intel RAPL power
capping driver to pr_debug() (Ville Syrjälä)
- Change the minimum python version for the intel_pstate_tracer
utility from 2.7 to 3.6 (Doug Smythies)"
* tag 'pm-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (82 commits)
dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware
cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT
cpufreq: qcom-nvmem: add support for IPQ8064
cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu
cpufreq: qcom-nvmem: add support for IPQ6018
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018
cpufreq: qcom-nvmem: Add MSM8909
cpufreq: qcom-nvmem: Simplify driver data allocation
powercap: intel_rapl: Downgrade BIOS locked limits pr_warn() to pr_debug()
cpufreq: stats: Fix buffer overflow detection in trans_stats()
dt-bindings: devfreq: event: rockchip,dfi: Add rk3588 support
dt-bindings: devfreq: event: rockchip,dfi: Add rk3568 support
dt-bindings: devfreq: event: convert Rockchip DFI binding to yaml
PM / devfreq: rockchip-dfi: add support for RK3588
PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registers
PM / devfreq: rockchip-dfi: make register stride SoC specific
PM / devfreq: rockchip-dfi: Add perf support
PM / devfreq: rockchip-dfi: give variable a better name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq updates for 6.7 from Viresh Kumar:
"- Add support for several Qualcomm SoC versions and other similar
changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil
Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan
Gerhold and Varadarajan Narayanan).
- Cleanups to the tegra cpufreq driver (Sumit Gupta).
- Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob Herring).
- Add support for TI's am62p5 Soc (Bryan Brattlof).
- Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian
Fainelli).
- Update Kconfig to mention i.MX7 as well (Alexander Stein)."
* tag 'cpufreq-arm-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (25 commits)
dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware
cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT
cpufreq: qcom-nvmem: add support for IPQ8064
cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu
cpufreq: qcom-nvmem: add support for IPQ6018
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018
cpufreq: qcom-nvmem: Add MSM8909
cpufreq: qcom-nvmem: Simplify driver data allocation
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
cpufreq: ARM_BRCMSTB_AVS_CPUFREQ cannot be used with ARM_SCMI_CPUFREQ
cpufreq: ti-cpufreq: Add opp support for am62p5 SoCs
cpufreq: dt-platdev: add am62p5 to blocklist
cpufreq: tegra194: remove redundant AND with cpu_online_mask
cpufreq: tegra194: use refclk delta based loop instead of udelay
cpufreq: tegra194: save CPU data to avoid repeated SMP calls
dt-bindings: cpufreq: cpufreq-qcom-hw: add SDM670 compatible
dt-bindings: cpufreq: qcom-nvmem: Document MSM8909
cpufreq: dt: platdev: Add MSM8909 to blocklist
...
|
|
Since commit a5a9dffcc903 ("ARM: imx: Switch imx7d to imx-cpufreq-dt
for speed-grading") i.MX7 uses this driver as well. Add it to the
description text.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
IPQ8064 comes in 3 families:
* IPQ8062 up to 1.0GHz
* IPQ8064/IPQ8066/IPQ8068 up to 1.4GHz
* IPQ8065/IPQ8069 up to 1.7Ghz
So, in order to be able to support one OPP table, add support for
IPQ8064 family based of SMEM SoC ID-s and correctly set the version so
opp-supported-hw can be correctly used.
Bit are set with the following logic:
* IPQ8062 BIT 0
* IPQ8064/IPQ8066/IPQ8068 BIT 1
* IPQ8065/IPQ8069 BIT 2
speed is never fused, only pvs values are fused.
IPQ806x SoC doesn't have pvs_version so we drop and we use the new
pattern:
opp-microvolt-speed0-pvs<PSV_VALUE>
Example:
- for ipq8062 psv2
opp-microvolt-speed0-pvs2 = < 925000 878750 971250>
Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
[ Viresh: Fixed rebase conflict. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
the qcom-cpufreq-nvmem driver attempts to support both Qualcomm Kryo
(newer 64-bit ARMv8 cores) and Krait (older 32-bit ARMv7 cores). It
makes no sense to use 'operating-points-v2-kryo-cpu' compatibility node
for the Krait cores. Add support for 'operating-points-v2-krait-cpu'
compatibility string.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The fuses used on msm8960 / apq8064 / ipq806x families of devices do not
have the pvs version. Drop this argument from parsing function.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
IPQ6018 SoC series comes in multiple SKU-s, and not all of them support
high frequency OPP points.
SoC itself does however have a single bit in QFPROM to indicate the CPU
speed-bin.
That bit is used to indicate frequency limit of 1.5GHz, but that alone is
not enough as IPQ6000 only goes up to 1.2GHz, but SMEM ID can be used to
limit it further.
IPQ6018 compatible is blacklisted from DT platdev as the cpufreq device
will get created by NVMEM CPUFreq driver.
Signed-off-by: Robert Marko <robimarko@gmail.com>
[ Viresh: Fixed rebase conflict. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
When the MSM8909 SoC is used together with the PM8909 PMIC the primary
power supply for the CPU (VDD_APC) is shared with other components to
the SoC, namely the VDD_CX power domain typically supplied by the PM8909
S1 regulator. This means that all votes for necessary performance states
go via the RPM firmware which collects the requirements from all the
processors in the SoC. The RPM firmware then chooses the actual voltage
based on the performance states ("corners"), depending on calibration
values in the NVMEM and other factors.
The MSM8909 SoC is also sometimes used with the PM8916 or PM660 PMIC.
In that case there is a dedicated regulator connected to VDD_APC and
Linux is responsible to do adaptive voltage scaling using CPR (similar
to the existing code for QCS404).
This difference can be described in the device tree, by either assigning
the CPU a power domain from RPMPD or from the CPR driver.
Describe this using "perf" as generic power domain name, which is also
used already for SCMI based platforms.
Also add a simple function that reads the speedbin from a NVMEM cell
and sets it as-is for opp-supported-hw. The actual bit position can be
described in the device tree without additional driver changes.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
[ Viresh: Fixed rebase conflict. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Simplify the allocation and cleanup of driver data by using devm
together with a flexible array. Prepare for adding additional per-CPU
data by defining a struct qcom_cpufreq_drv_cpu instead of storing the
opp_tokens directly.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Commit 3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential
buffer overflow") switched from snprintf to the more secure scnprintf
but never updated the exit condition for PAGE_SIZE.
As the commit say and as scnprintf document, what scnprintf returns what
is actually written not counting the '\0' end char. This results in the
case of len exceeding the size, len set to PAGE_SIZE - 1, as it can be
written at max PAGE_SIZE - 1 (as '\0' is not counted)
Because of len is never set to PAGE_SIZE, the function never break early,
never prints the warning and never return -EFBIG.
Fix this by changing the condition to PAGE_SIZE - 1 to correctly trigger
the error.
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Fixes: 3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The brcmstb-avs-cpufreq driver is considered a legacy driver and since
2018, ARCH_BRCMSTB systems have been using scmi-cpufreq. As a matter of
fact, when SCMI is in use, brcmstb-avs-cpufreq is unusable since the
SCMI firmware takes over, this can result in various problems, including
external synchronous aborts.
Express those constraints such that the driver is not enabled by default
when SCMI CPU frequency scaling is in use.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The am62p5 is a variation of the am625 and the am62a7 SoC families. Add
the am62p5 to the list using the same cpufreq data as the rest of the
am62x extended family.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The am62p5 family of SoCs is a variation of the am625 and am62a7 SoC
family. Add this device along with the devices which will use the
operating-points-v2 property.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Remove redundant 'AND' with cpu_online_mask as the policy->cpus always
contains only the currently online CPUs.
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/lkml/20231003050019.a6mcchw2o2z2wkrh@vireshk-i7/
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
[ Viresh: Fix rebase conflict ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Use reference clock count based loop instead of "udelay()" for
sampling of counters to improve the accuracy of re-generated CPU
frequency. "udelay()" internally calls "WFE" which stops the
counters and results in bigger delta between the last set freq
and the re-generated value from counters. The counter sampling
window used in loop is the minimum number of reference clock
cycles which is known to give a stable value of CPU frequency.
The change also helps to reduce the sampling window from "500us"
to "<50us".
Suggested-by: Antti Miettinen <amiettinen@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Currently, we make SMP call on every frequency set request to get the
physical 'CPU ID' and 'CLUSTER ID' for the target CPU. This change
optimizes the repeated calls by storing the physical IDs and the per
core frequency register offset for all CPUs during boot. Later this
info is used directly when required to set the frequency or read it
from ACTMON counters.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The Energy Aware Scheduler (EAS) relies on the schedutil governor.
When moving to/from the schedutil governor, sched domains must be
rebuilt to allow re-evaluating the enablement conditions of EAS.
This is done through sched_cpufreq_governor_change().
Having a cpufreq governor assumes a cpufreq driver is running.
Inserting/removing a cpufreq driver should trigger a re-evaluation
of EAS enablement conditions, avoiding to see EAS enabled when
removing a running cpufreq driver.
Rebuild the sched domains in schedutil's sugov_init()/sugov_exit(),
allowing to check EAS's enablement condition whenever schedutil
governor is initialized/exited from.
Move relevant code up in schedutil.c to avoid a split and conditional
function declaration.
Rename sched_cpufreq_governor_change() to sugov_eas_rebuild_sd().
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The userspace governor uses the 'cpu' field of cpufreq_policy structure
to track if it is allowed to set the speed of the policy.
However, there is a window where the 'cpu' field is equal to the value
of nr_cpus_id when all affected CPUs of policy are offline, which is an
illegal value to get the per-CPU variable.
To avoid this issue, modify the governor to use a per-policy indicator
to track if the policy is managed.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The userspace governor currently uses a big global mutex to avoid the
race condition on the governor_data field of cpufreq_policy structure.
This leads to a low concurrency if multiple userspace applications are
trying to set the speed of different policies at the same time.
Introduce a per-policy mutex to allow the updating of different policies
to be performed concurrently, improving overall concurrency.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The governor currently checks if the input new down_threshold is less
than 100 before storing it, but the up_threshold field of dbs_data
structure is also limited to be less than 100, so this check is
unnecessary and remove it.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
We should prefer more robust and less ambiguous string interfaces.
Both `policy->last_governor` and `default_governor` are expected to be
NUL-terminated which is shown by their heavy usage with other string
apis like `strcmp`.
A suitable replacement is `strscpy` [2] due to the fact that it guarantees
NUL-termination on the destination buffer.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230913-strncpy-drivers-cpufreq-cpufreq-c-v1-1-f1608bfeff63@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
MSM8909 uses qcom-cpufreq-nvmem to attach power domains and to parse the
speedbin from NVMEM (for opp-supported-hw).
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[ Viresh: Fixed order in table ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Use the recently added of_property_read_reg() helper to get the
untranslated "reg" address value.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The Qualcomm QCM6490 platform uses the qcom-cpufreq-hw driver, so add it
to the cpufreq-dt-platdev driver's blocklist.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Fix the warning due to missing dev_pm_opp_put() call and hence
wrong refcount value. This causes below warning message when
trying to remove the module.
Call trace:
dev_pm_opp_put_opp_table+0x154/0x15c
dev_pm_opp_remove_table+0x34/0xa0
_dev_pm_opp_cpumask_remove_table+0x7c/0xbc
dev_pm_opp_of_cpumask_remove_table+0x10/0x18
tegra194_cpufreq_exit+0x24/0x34 [tegra194_cpufreq]
cpufreq_remove_dev+0xa8/0xf8
subsys_interface_unregister+0x90/0xe8
cpufreq_unregister_driver+0x54/0x9c
tegra194_cpufreq_remove+0x18/0x2c [tegra194_cpufreq]
platform_remove+0x24/0x74
device_remove+0x48/0x78
device_release_driver_internal+0xc8/0x160
driver_detach+0x4c/0x90
bus_remove_driver+0x68/0xb8
driver_unregister+0x2c/0x58
platform_driver_unregister+0x10/0x18
tegra194_ccplex_driver_exit+0x14/0x1e0 [tegra194_cpufreq]
__arm64_sys_delete_module+0x184/0x270
Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
[ Viresh: Add a blank line ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The performance domain-id can be described in DT using the power-domains
property or the clock property. The latter is already supported, so let's
add support for the power-domains too.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-12-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The domain-id for the cpu_dev has already been parsed at the point when
scmi_get_sharing_cpus() is getting called. Let's pass it as an in-parameter
to avoid the unnecessary OF parsing.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-7-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
