summaryrefslogtreecommitdiff
path: root/drivers/edac/skx_common.h
AgeCommit message (Collapse)AuthorFilesLines
2023-01-25EDAC/i10nm: Add Intel Granite Rapids server supportQiuxu Zhuo1-2/+3
The Granite Rapids CPU model uses similar memory controller registers as Sapphire Rapids server but with some different configurations: - Various memory controller numbers for different Granite Rapids CPUs. So detect the number of present memory controllers at run time. - Different MMIO offsets of memory controllers. - Different triples of bus/dev/fun of some PCI devices used in i10nm_edac. Add above configurations and Granite Rapids CPU model ID for EDAC support. [Tony: Fixed 2 typos s/strcture/structure/] Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/all/20230113032802.41752-1-qiuxu.zhuo@intel.com
2023-01-25EDAC/i10nm: Make more configurations CPU model specificQiuxu Zhuo1-2/+30
The numbers of memory controllers per socket, channels per memory controller, DIMMs per channel and the triples of bus/device/function of PCI devices used in i10nm_edac can be CPU model specific. Add new fields to the structure res_config for above numbers and triples to make them CPU model specific. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/all/20230113032802.41752-1-qiuxu.zhuo@intel.com
2023-01-25EDAC/skx_common: Enable EDAC support for the "near" memoryQiuxu Zhuo1-0/+24
The current {skx,i10nm}_edac miss the EDAC support to decode errors from the 1st level memory (the fast "near" memory as cache) of the 2-level memory system. Introduce a helper function skx_error_in_mem() to check whether errors are from memory at the beginning of skx_mce_check_error(). As long as the errors are from memory (either the 1-level memory system or the 2-level memory system), decode the errors. Reported-and-tested-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/all/20230113032802.41752-1-qiuxu.zhuo@intel.com
2022-09-23EDAC/i10nm: Print an extra register set of retry_rd_err_logQiuxu Zhuo1-0/+2
Sapphire Rapids server adds an extra register set for logging more retry_rd_err_log data. So add code to print the extra register set. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/all/20220722233338.341567-1-tony.luck@intel.com
2022-09-23EDAC/i10nm: Retrieve and print retry_rd_err_log registers for HBMQiuxu Zhuo1-0/+4
An HBM memory channel is divided into two pseudo channels. Each pseudo channel has its own retry_rd_err_log registers. Retrieve and print retry_rd_err_log registers of the HBM pseudo channel if the memory error is from HBM. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/all/20220722233338.341567-1-tony.luck@intel.com
2022-09-23EDAC/skx_common: Add ChipSelect ADXL componentQiuxu Zhuo1-0/+4
Each pseudo channel of HBM has its own retry_rd_err_log registers. The bit 0 of ChipSelect ADXL component encodes the pseudo channel number of HBM memory. So add ChipSelect ADXL component to get HBM pseudo channel number. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/all/20220722233338.341567-1-tony.luck@intel.com
2022-09-08EDAC/i10nm: Add driver decoder for Ice Lake and Tremont CPUsYouquan Song1-0/+5
Current i10nm_edac only supports firmware decoder (ACPI DSM methods). MCA bank registers of Ice Lake or Tremont CPUs contain the information to decode DDR memory errors. To get better decoding performance, add the driver decoder (decoding DDR memory errors via extracting error information from MCA bank registers) for Ice Lake and Tremont CPUs. Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/all/20220901194310.115427-1-tony.luck@intel.com/
2022-09-08EDAC/skx_common: Use driver decoder firstQiuxu Zhuo1-0/+1
The performance of driver decoder[1] is better than the performance of firmware decoder[2], especially on frequent correctable errors. So use the driver decoder first, fall back to firmware decoder if the driver decoder is unavailable. Also rename the function pointer skx_decode to driver_decode (better name to contrast with adxl_decode). [1] Decode errors by extracting error information from registers of memory controllers and/or MCA bank registers. [2] Decode errors by calling ACPI DSM methods. Co-developed-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/all/20220901194310.115427-1-tony.luck@intel.com/
2021-08-23EDAC/i10nm: Retrieve and print retry_rd_err_log registersYouquan Song1-1/+6
Retrieve and print retry_rd_err_log registers like the earlier change: commit e80634a75aba ("EDAC, skx: Retrieve and print retry_rd_err_log registers") This is a little trickier than on Skylake because of potential interference with BIOS use of the same registers. The default behavior is to ignore these registers. A module parameter retry_rd_err_log(default=0) controls the mode of operation: - 0=off : Default. - 1=bios : Linux doesn't reset any control bits, but just reports values. This is "no harm" mode, but it may miss reporting some data. - 2=linux: Linux tries to take control and resets mode bits, clears valid/UC bits after reading. This should be more reliable (especially if BIOS interference is reduced by disabling eMCA reporting mode in BIOS setup). Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20210818175701.1611513-3-tony.luck@intel.com
2021-06-18EDAC/i10nm: Add support for high bandwidth memoryQiuxu Zhuo1-3/+17
A future Xeon processor will include in-package HBM (high bandwidth memory). The in-package HBM memory controller shares the same architecture with the regular DDR memory controller. Add the HBM memory controller devices for EDAC support. Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20210611170123.1057025-4-tony.luck@intel.com
2021-06-18EDAC/i10nm: Add detection of memory levels for ICX/SPR serversQiuxu Zhuo1-0/+3
Current i10nm_edac driver is only for system configured in 1-level memory. If the system is configured in 2-level memory, the driver doesn't report the 1st level memory DIMM for the error address, even if the error occurs in the 1st level memory. Both Ice Lake servers and Sapphire Rapids servers can be configured in 2-level memory. Add detection of memory levels to i10nm_edac for the two kinds of servers so that the driver can report the 2nd level memory DIMM or the 1st level memory DIMM according to error source. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20210611170123.1057025-3-tony.luck@intel.com
2021-06-18EDAC/skx_common: Add new ADXL components for 2-level memoryQiuxu Zhuo1-0/+11
Some Intel servers may configure memory in 2 levels, using fast "near" memory (e.g. DDR) as a cache for larger, slower, "far" memory (e.g. 3D X-point). In these configurations the BIOS ADXL address translation for an address in a 2-level memory range will provide details of both the "near" and far components. Current exported ADXL components are only for 1-level memory system or for 2nd level memory of 2-level memory system. So add new ADXL components for 1st level memory of 2-level memory system to fully support 2-level memory system and the detection of memory error source(1st level memory or 2nd level memory). Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20210611170123.1057025-2-tony.luck@intel.com
2020-11-19EDAC/i10nm: Add Intel Sapphire Rapids server supportQiuxu Zhuo1-4/+12
The Sapphire Rapids CPU model shares the same memory controller architecture with Ice Lake server. There are some configurations different from Ice Lake server as below: - The device ID for configuration agent. - The size for per channel memory-mapped I/O. - The DDR5 memory support. So add the above configurations and the Sapphire Rapids CPU model ID for EDAC support. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2020-06-01Merge branches 'edac-i10nm' and 'edac-misc' into edac-updates-for-5.8Borislav Petkov1-3/+10
Signed-off-by: Borislav Petkov <bp@suse.de>
2020-05-20EDAC/skx: Use the mcmtr register to retrieve close_pg/bank_xor_enableQiuxu Zhuo1-1/+1
The skx_edac driver wrongly uses the mtr register to retrieve two fields close_pg and bank_xor_enable. Fix it by using the correct mcmtr register to get the two fields. Cc: <stable@vger.kernel.org> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Reported-by: Matthew Riley <mattdr@google.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20200515210146.1337-1-tony.luck@intel.com
2020-04-27EDAC, {skx,i10nm}: Make some configurations CPU model specificQiuxu Zhuo1-2/+9
The device ID for configuration agent PCI device and the offset for bus number configuration register can be CPU model specific. So add a new structure res_config to make them configurable and pass res_config to {skx,i10nm}_init() and skx_get_all_bus_mappings() for use. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20200427083246.GB11036@zn.tnic
2019-10-19EDAC, skx: Retrieve and print retry_rd_err_log registersTony Luck1-1/+3
Skylake logs some additional useful information in per-channel registers in addition the the architectural status/addr/misc logged in the machine check bank. Pick up this information and add it to the EDAC log: retry_rd_err_[five 32-bit register values] Sorry, no definitions for these registers. OEMs and DIMM vendors will be able to use them to isolate which cells in the DIMM are causing problems. correrrcnt[per rank corrected error counts] Note that if additional errors are logged while these registers are being read, you may see a jumble of values some from earlier errors, others from later errors (since the registers report the most recent logged error). The correrrcnt registers provide error counts per possible rank. If these counts only change by one since the previous error logged for this channel, then it is safe to assume that the registers logged provide a coherent view of one error. With this change EDAC logs look like this: EDAC MC4: 1 CE memory read error on CPU_SrcID#2_MC#0_Chan#1_DIMM#0 (channel:1 slot:0 page:0x8f26018 offset:0x0 grain:32 syndrome:0x0 - err_code:0x0101:0x0091 socket:2 imc:0 rank:0 bg:0 ba:0 row:0x1f880 col:0x200 retry_rd_err_log[0001a209 00000000 00000001 04800001 0001f880] correrrcnt[0001 0000 0000 0000 0000 0000 0000 0000]) Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-06-26EDAC, skx, i10nm: Fix source ID register offsetQiuxu Zhuo1-1/+1
The source ID register offset for Skylake server is 0xf0, while for Icelake server is 0xf8. Pass the correct offset to get the source ID. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-03-23EDAC, skx, i10nm: Make skx_common.c a pure libraryQiuxu Zhuo1-8/+0
The following Kconfig constellations fail randconfig builds: CONFIG_ACPI_NFIT=y CONFIG_EDAC_DEBUG=y CONFIG_EDAC_SKX=m CONFIG_EDAC_I10NM=y or CONFIG_ACPI_NFIT=y CONFIG_EDAC_DEBUG=y CONFIG_EDAC_SKX=y CONFIG_EDAC_I10NM=m with: ... CC [M] drivers/edac/skx_common.o ... .../skx_common.o:.../skx_common.c:672: undefined reference to `__this_module' That is because if one of the two drivers - skx_edac or i10nm_edac - is built-in and the other one is a module, the shared file skx_common.c gets linked into a module object by kbuild. Therefore, when linking that same file into vmlinux, the '__this_module' symbol used in debugfs isn't defined, leading to the above error. Fix it by moving all debugfs code from skx_common.c to both skx_base.c and i10nm_base.c respectively. Thus, skx_common.c doesn't refer to the '__this_module' symbol anymore. Clarify skx_common.c's purpose at the top of the file for future reference, while at it. [ bp: Make text more readable. ] Fixes: d4dc89d069aa ("EDAC, i10nm: Add a driver for Intel 10nm server processors") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: https://lkml.kernel.org/r/20190321221339.GA32323@agluck-desk
2019-02-02EDAC, skx_common: Separate common code out from skx_edacQiuxu Zhuo1-0/+152
Parts of skx_edac can be shared with the Intel 10nm server EDAC driver. Carve out the common parts from skx_edac in preparation to support both skx_edac driver and i10nm_edac drivers. Co-developed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: https://lkml.kernel.org/r/20190130191519.15393-3-tony.luck@intel.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-26 15:21:21 +0300