summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-omap.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-11gpio: gpio-omap: Remove conditional pm_runtime handling for GPIO interruptsRussell King1-16/+2
Commit b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead") moved interrupt using GPIO banks to idle with cpu_pm in order to drop the use of pm_runtime_irq_safe() in a later patch. The GPIO banks with no interrupts claimed are still being idled based on PM runtime calls. However this caused a regression for am437x suspend for rtc+ddr idle mode where the device cannot enter idle state as reported by Keerthy <j-keerthy@ti.com>. To fix the issue, we must not fail the pm_runtime callbacks. For GPIO interrupts, we already have irq_chip_pm_get increment the PM runtime use count as pointed out by Grygorii Strashko <grygorii.strashko@ti.com>. So all we need to do is remove the conditional handling in the runtime_suspend and resume functions and let the CPU PM notifier idle the GPIO banks. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead") Reported-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [tony@atomide.com: updated patch description, dropped runtime count changes] Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-11gpio: gpio-omap: configure edge detection for level IRQs for idle wakeupRussell King1-79/+11
The GPIO block can enter idle independently of the CPU power management calls via smart-idle. When the GPIO block enters idle, level detection stops working due to clocks being shut off, and an alternative form of edge detection is used. However, this needs the edge detection registers set to mark the appropriate edges. Arrange to configure the edge detection enables along with the level detection to ensure that any transition to active interrupt state that occurs while the block is idle is detected as a wake-up event. Since we enable the edge detection when configuring the IRQ, both omap2_gpio_enable_level_quirk() nor omap2_gpio_disable_level_quirk() become redundant, which also means OMAP_GPIO_QUIRK_IDLE_REMOVE_TRIGGER can be removed. This can be now done without regressions as patch "gpio: gpio-omap: fix level interrupt idling" allows level interrupts to idle on omap4 without a workaround. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [tony@atomide.com: update description for the fix dependency] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-08Merge tag 'gpio-v5.2-updates-for-linus-part1' of ↵Linus Walleij1-28/+33
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio: updates for v5.2 (part 1) - batch of improvements for the vf610 driver which shrink the code and make use of resource managed helpers - support for a new variant of pca953x - make gpio-mockup buildable on systems without IOMEM - make gpio-74x164 more flexible by using generic device properties plus minor improvements - new driver for Mellanox BlueField - fixes for wakeup GPIOs in gpio-omap - use devm_platform_ioremap_resource() in gpio-mxc - a couple improvements of kernel docs for ACPI code - don't WARN() in gpiod_put() on optional GPIOs
2019-04-04gpio: omap: use devm_platform_ioremap_resource()Enrico Weigelt, metux IT consult1-3/+1
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-04gpio: omap: avoid clang warningArnd Bergmann1-278/+263
clang warns about a tentative array definition in the gpio-omap driver: drivers/gpio/gpio-omap.c:1282:34: error: tentative array definition assumed to have one element [-Werror] static const struct of_device_id omap_gpio_match[]; It's best to just reorder the entire file to avoid forward declarations, which lets us use the regular declaration. To do this, the unnecessary CONFIG_OF check must also be removed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-03-27gpio: gpio-omap: add check for off wake capable gpiosTony Lindgren1-8/+17
We are currently assuming all GPIOs are non-wakeup capable GPIOs as we not configuring the bank->non_wakeup_gpios like we used to earlier with platform_data. Let's add omap_gpio_is_off_wakeup_capable() to make the handling clearer while considering that later patches may want to configure SoC specific bank->non_wakeup_gpios for the GPIOs in wakeup domain. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-27gpio: gpio-omap: always scan for triggered non-wakeup capable interruptsTony Lindgren1-8/+0
The bank->workaround_enabled should be for omap24xx erratum 1.101 but is not needed any longer as erratum 1.101 handling only needs to happen based on !bank->loses_context with patch "gpio: omap: Limit errata 1.101 handling to wkup domain gpios only". Further Grygorii Strashko <grygorii.strashko@ti.com> points out that we are now tagging all edge GPIOs as non-wakeup GPIOs and rely on original erratum 1.101 handling for scacnning for edge interrupts that have triggered during idle. Also the TI Android kernel tree has an earlier commit "GPIO: OMAP: Always scan gpios during runtime resume" by Tero Kristo <t-kristo@ti.com> saying: "This allows the driver to generate interrupts for GPIOs that can't wakeup but have changed state during runtime suspend. We cannot depend on the decision based on no need to restore, as the system state might change and pending events could gather up." So let's remove bank->workaround_enabled and always scan for triggered edge interrupts on resume. We do that based on bank->enabled_non_wakeup_gpios. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-27gpio: gpio-omap: limit errata 1.101 handling to wkup domain gpios onlyTony Lindgren1-12/+16
We need to only apply errata 1.101 handling to clear non-wakeup edge gpios for idle to the gpio bank(s) in the wkup domain to prevent spurious wake-up events. And we must restore what we did after idle manually as the gpio bank in wkup domain is not restored otherwise. Let's keep bank->saved_datain register reading separate, that's not related to the 1.101 errata and is used separately on restore. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-08gpio: gpio-omap: fix level interrupt idlingRussell King1-6/+8
Tony notes that the GPIO module does not idle when level interrupts are in use, as the wakeup appears to get stuck. After extensive investigation, it appears that the wakeup will only be cleared if the interrupt status register is cleared while the interrupt is enabled. However, we are currently clearing it with the interrupt disabled for level-based interrupts. It is acknowledged that this observed behaviour conflicts with a statement in the TRM: CAUTION After servicing the interrupt, the status bit in the interrupt status register (GPIOi.GPIO_IRQSTATUS_0 or GPIOi.GPIO_IRQSTATUS_1) must be reset and the interrupt line released (by setting the corresponding bit of the interrupt status register to 1) before enabling an interrupt for the GPIO channel in the interrupt-enable register (GPIOi.GPIO_IRQSTATUS_SET_0 or GPIOi.GPIO_IRQSTATUS_SET_1) to prevent the occurrence of unexpected interrupts when enabling an interrupt for the GPIO channel. However, this does not appear to be a practical problem. Further, as reported by Grygorii Strashko <grygorii.strashko@ti.com>, the TI Android kernel tree has an earlier similar patch as "GPIO: OMAP: Fix the sequence to clear the IRQ status" saying: if the status is cleared after disabling the IRQ then sWAKEUP will not be cleared and gates the module transition When we unmask the level interrupt after the interrupt has been handled, enable the interrupt and only then clear the interrupt. If the interrupt is still pending, the hardware will re-assert the interrupt status. Should the caution note in the TRM prove to be a problem, we could use a clear-enable-clear sequence instead. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [tony@atomide.com: updated comments based on an earlier TI patch] Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-29Merge tag 'gpio-v4.21-1' of ↵Linus Torvalds1-8/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.21 kernel series. Core changes: - Some core changes are already in outside of this pull request as they came through the regulator tree, most notably devm_gpiod_unhinge() that removes devres refcount management from a GPIO descriptor. This is needed in subsystems such as regulators where the regulator core need to take over the reference counting and lifecycle management for a GPIO descriptor. - We dropped devm_gpiochip_remove() and devm_gpio_chip_match() as nothing needs it. We can bring it back if need be. - Add a global TODO so people see where we are going. This helps setting the direction now that we are two GPIO maintainers. - Handle the MMC CD/WP properties in the device tree core. (The bulk of patches activating this code is already merged through the MMC/SD tree.) - Augment gpiochip_request_own_desc() to pass a flag so we as gpiochips can request lines as active low or open drain etc even from ourselves. New drivers: - New driver for Cadence GPIO blocks. - New driver for Atmel SAMA5D2 PIOBU GPIO lines. Driver improvements: - A major refactoring of the PCA953x driver - this driver has been around for ages, and is now modernized to reduce code duplication that has stacked up and is using regmap to read write and cache registers. - Intel drivers are now maintained in a separate tree and start with a round of cleanups and unifications" * tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (99 commits) gpio: sama5d2-piobu: Depend on OF_GPIO gpio: Add Cadence GPIO driver dt-bindings: gpio: Add bindings for Cadence GPIO gpiolib-acpi: remove unused variable 'err', cleans up build warning gpio: mxs: read pin level directly instead of using .get gpio: aspeed: remove duplicated statement gpio: add driver for SAMA5D2 PIOBU pins dt-bindings: arm: atmel: describe SECUMOD usage as a GPIO controller gpio/mmc/of: Respect polarity in the device tree dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) support memory: omap-gpmc: Get the header of the enum ARM: omap1: Fix new user of gpiochip_request_own_desc() gpio: pca953x: Add regmap dependency for PCA953x driver gpio: raspberrypi-exp: decrease refcount on firmware dt node gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB gpio: pca953x: Restore registers after suspend/resume cycle gpio: pca953x: Zap single use of pca953x_read_single() gpio: pca953x: Zap ad-hoc reg_output cache gpio: pca953x: Zap ad-hoc reg_direction cache gpio: pca953x: Perform basic regmap conversion ...
2018-12-21gpio: gpio-omap: Revert deferred wakeup quirk handling for regressionsTony Lindgren1-59/+5
Commit ec0daae685b2 ("gpio: omap: Add level wakeup handling for omap4 based SoCs") attempted to fix omap4 GPIO wakeup handling as it was blocking deeper SoC idle states. However this caused a regression for GPIOs during runtime having over second long latencies for Ethernet GPIO interrupt as reportedy by Russell King <rmk+kernel@armlinux.org.uk>. Let's fix this issue by doing a partial revert of the breaking commit. We still want to keep the quirk handling around as it is also used for OMAP_GPIO_QUIRK_IDLE_REMOVE_TRIGGER. The real fix for omap4 GPIO wakeup handling involves fixes for omap_set_gpio_trigger() and omap_gpio_unmask_irq() and will be posted separately. And we must keep the wakeup bit enabled during runtime because of module doing clock autogating with autoidle configured. Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Fixes: ec0daae685b2 ("gpio: omap: Add level wakeup handling for omap4 based SoCs") Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-05gpio: gpio-omap: simplify getting .driver_dataWolfram Sang1-8/+4
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-01gpio: omap: Remove set but not used variable 'dev'YueHaibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpio/gpio-omap.c: In function 'gpio_omap_cpu_notifier': drivers/gpio/gpio-omap.c:1327:17: warning: variable 'dev' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-01gpio: omap: drop omap_gpio_listGrygorii Strashko1-4/+0
omap_gpio_list is unused so drop it. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-01gpio: omap: get rid of the conditional PM runtime callsGrygorii Strashko1-20/+5
OMAP GPIO driver is checking !BANK_USED() used condition before calling PM runtime API, because of PM runtime calls in omap2_gpio_prepare/resume_for_idle(). It's not required any more since "omap gpio add level idle, cpu_pm and drop runtime_irq_safe" series [1] from Tony Lindgren was accepted and PM runtime management was enabled in IRQ chip core by commit be45beb2df69 ("genirq: Add runtime power management support for IRQ chips") . As result safely drop !BANK_USED() checks from omap_gpio_request/free(), omap_gpio_irq_bus_lock/unlock() and enable PM runtime management for OMAP GPIO IRQ chip. [1] https://www.spinics.net/lists/arm-kernel/msg677583.html Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-24gpio: omap: Get rid of pm_runtime_irq_safe()Tony Lindgren1-3/+3
If a gpio instance has any GPIO bits requested we do a pm_runtime_get() on the device. Now with cpu_pm handling the deeper SoC idle state quirks, let's just remove pm_runtime_irq_safe() call and add a warning in case we ever happen to encounter it. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-24gpio: omap: Remove custom PM calls and use cpu_pm insteadTony Lindgren1-70/+108
For a long time the gpio-omap custom PM calls have been annoying me so let's replace them with cpu_pm instead. This will enable GPIO PM for deeper idle states on omap4. And we can handle GPIO PM for omap2/3/4 in the same way. Note that with this patch we are also slightly changing GPIO PM to be less aggressive for omap3 and only will idle GPIO when PER context may be lost. For omap2, we don't need to save context and don't want to remove any triggering so let's add a quirk flag for that. Let's do this all in a single patch to avoid a situation where old custom calls still are used with new code. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-24gpio: omap: Add level wakeup handling for omap4 based SoCsTony Lindgren1-33/+118
I noticed that unlike omap2 and 3 based SoCs, omap4 based SoCs keep the GPIO clocks enabled for GPIO level interrupts with wakeup enabled. This blocks deeper idle states as the whole domain will stay busy. The GPIO functional clock seems to stay enabled if the wakeup register is enabled and a level interrupt is triggered. In that case the only way to have the GPIO module idle is to reset it. It is possible this has gone unnoticed with OSWR (Open SWitch Retention) and off mode during idle resetting GPIO context most GPIO instances in the earlier Android trees for example. Looks like the way to deal with this is to have omap4 based SoCs only set wake for the duration of idle for level interrupts, and clear level registers for the idle. With level interrupts we can do this as the level interrupt from device will be still there on resume. I've taken the long path to fixing this to avoid yet more hard to read code. I've set up a quirks flag, and a struct for function pointers so we can use these to clean up other quirk handling easier in the later patches. The current level quirk handling is moved to the new functions. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-07gpio: omap: Add get/set_multiple() callbacksJanusz Krzysztofik1-2/+86
This should make applications utilizing whole banks work faster. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24gpio: omap: Include the right headerLinus Walleij1-1/+1
This is a GPIO driver, include only <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: omap: Improve a size determinationMarkus Elfring1-1/+1
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: omap: Delete an error messageMarkus Elfring1-3/+1
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03gpio: omap: Give unique labels to each GPIO bank/chipLinus Walleij1-1/+6
As we need to add GPIO lookup tables to the OMAP platforms, we need to reference each GPIO chip with a unique label. Use the GPIO base to name each chip, "gpio-0-31", "gpio-32-63" etc. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Kevin Hilman <khilman@kernel.org> Cc: linux-omap@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpio: omap: initialize gpioirq chip as part of gpiochip_add_dataGrygorii Strashko1-18/+14
Hence, series from Thierry Reding [1] merged - the OMAP GPIO driver can be switched to reuse new feature and just fill new struct gpio_irq_chip before calling gpiochip_add_data() instead of using few separate gpioirq chip APIs. gpiochip_add_data() will do the job and create and initialize gpioirq chip [1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1531592.html Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-15Merge tag 'gpio-v4.15-1' of ↵Linus Torvalds1-1/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.15 kernel cycle: Core: - Fix the semantics of raw GPIO to actually be raw. No inversion semantics as before, but also no open draining, and allow the raw operations to affect lines used for interrupts as the caller supposedly knows what they are doing if they are getting the big hammer. - Rewrote the __inner_function() notation calls to names that make more sense. I just find this kind of code disturbing. - Drop the .irq_base() field from the gpiochip since now all IRQs are mapped dynamically. This is nice. - Support for .get_multiple() in the core driver API. This allows us to read several GPIO lines with a single register read. This has high value for some usecases: it can be used to create oscilloscopes and signal analyzers and other things that rely on reading several lines at exactly the same instant. Also a generally nice optimization. This uses the new assign_bit() macro from the bitops lib that was ACKed by Andrew Morton and is implemented for two drivers, one of them being the generic MMIO driver so everyone using that will be able to benefit from this. - Do not allow requests of Open Drain and Open Source setting of a GPIO line simultaneously. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. - A new interrupt chip core helper. This will be helpful to deal with "banked" GPIOs, which means GPIO controllers with several logical blocks of GPIO inside them. This is several gpiochips per device in the device model, in contrast to the case when there is a 1-to-1 relationship between a device and a gpiochip. New drivers: - Maxim MAX3191x industrial serializer, a very interesting piece of professional I/O hardware. - Uniphier GPIO driver. This is the GPIO block from the recent Socionext (ex Fujitsu and Panasonic) platform. - Tegra 186 driver. This is based on the new banked GPIO infrastructure. Other improvements: - Some documentation improvements. - Wakeup support for the DesignWare DWAPB GPIO controller. - Reset line support on the DesignWare DWAPB GPIO controller. - Several non-critical bug fixes and improvements for the Broadcom BRCMSTB driver. - Misc non-critical bug fixes like exotic errorpaths, removal of dead code etc. - Explicit comments on fall-through switch() statements" * tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits) gpio: tegra186: Remove tegra186_gpio_lock_class gpio: rcar: Add r8a77995 (R-Car D3) support pinctrl: bcm2835: Fix some merge fallout gpio: Fix undefined lock_dep_class gpio: Automatically add lockdep keys gpio: Introduce struct gpio_irq_chip.first gpio: Disambiguate struct gpio_irq_chip.nested gpio: Add Tegra186 support gpio: Export gpiochip_irq_{map,unmap}() gpio: Implement tighter IRQ chip integration gpio: Move lock_key into struct gpio_irq_chip gpio: Move irq_valid_mask into struct gpio_irq_chip gpio: Move irq_nested into struct gpio_irq_chip gpio: Move irq_chained_parent to struct gpio_irq_chip gpio: Move irq_default_type to struct gpio_irq_chip gpio: Move irq_handler to struct gpio_irq_chip gpio: Move irqdomain into struct gpio_irq_chip gpio: Move irqchip into struct gpio_irq_chip gpio: Introduce struct gpio_irq_chip pinctrl: armada-37xx: remove unused variable ...
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding1-1/+1
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-07gpio: omap: Fix lost edge interruptsGrygorii Strashko1-9/+13
Now acking of edge irqs happens the following way: - omap_gpio_irq_handler - "isr" = read irq status - omap_clear_gpio_irqbank(bank, isr_saved & ~level_mask); ^ clear edge status, so irq can be accepted - loop while "isr" generic_handle_irq() - handle_edge_irq() - desc->irq_data.chip->irq_ack(&desc->irq_data); - omap_gpio_ack_irq() it might be that at this moment edge IRQ was triggered again and it will be cleared and IRQ will be lost. Use handle_simple_irq and clear edge interrupts early without disabling them in omap_gpio_irq_handler to avoid loosing interrupts. [1] https://marc.info/?l=linux-omap&m=149004465313534&w=2 Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-21gpio: omap: omap_gpio_show_rev is not __initArnd Bergmann1-1/+1
The probe function calls omap_gpio_show_rev(), which on most compilers is inlined, but on the old gcc-4.6 is not, causing a valid warning about the incorrect __init annotation: WARNING: vmlinux.o(.text+0x40f614): Section mismatch in reference from the function omap_gpio_probe() to the function .init.text:omap_gpio_show_rev() The function omap_gpio_probe() references the function __init omap_gpio_show_rev(). This is often because omap_gpio_probe lacks a __init annotation or the annotation of omap_gpio_show_rev is wrong. This removes the __init. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: omap : Add missing clk_unprepare().Arvind Yadav1-0/+2
omap_gpio_probe() can fail here and we must disable clock. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-28gpio: omap: return error if requested debounce time is not possibleDavid Rivshin1-6/+17
omap_gpio_debounce() does not validate that the requested debounce is within a range it can handle. Instead it lets the register value wrap silently, and always returns success. This can lead to all sorts of unexpected behavior, such as gpio_keys asking for a too-long debounce, but getting a very short debounce in practice. Fix this by returning -EINVAL if the requested value does not fit into the register field. If there is no debounce clock available at all, return -ENOTSUPP. Fixes: e85ec6c3047b ("gpio: omap: fix omap2_set_gpio_debounce") Cc: <stable@vger.kernel.org> # 4.3+ Signed-off-by: David Rivshin <drivshin@allworx.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-15gpio: omap: use devm_irq_alloc_descs()Bartosz Golaszewski1-1/+2
This driver never frees the allocated interrupt descriptors. Fix it by using a resource managed variant of irq_alloc_descs(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26pinctrl / gpio: Introduce .set_config() callback for GPIO chipsMika Westerberg1-1/+13
Currently we already have two pin configuration related callbacks available for GPIO chips .set_single_ended() and .set_debounce(). In future we expect to have even more, which does not scale well if we need to add yet another callback to the GPIO chip structure for each possible configuration parameter. Better solution is to reuse what we already have available in the generic pinconf. To support this, we introduce a new .set_config() callback for GPIO chips. The callback takes a single packed pin configuration value as parameter. This can then be extended easily beyond what is currently supported by just adding new types to the generic pinconf enum. If the GPIO driver is backed up by a pinctrl driver the GPIO driver can just assign gpiochip_generic_config() (introduced in this patch) to .set_config and that will take care configuration requests are directed to the pinctrl driver. We then convert the existing drivers over .set_config() and finally remove the .set_single_ended() and .set_debounce() callbacks. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-26gpio: omap: fix irq triggering in smart-idle wakeup modeGrygorii Strashko1-40/+2
Now GPIO IRQ loss is observed on dra7-evm after suspend/resume cycle in the following case: extcon_usb1(id_irq) -> pcf8575.gpio1 -> omapgpio6.gpio11 -> gic the extcon_usb1 is wake up source and it enables IRQ wake up for id_irq by calling enable/disable_irq_wake() during suspend/resume which, in turn, causes execution of omap_gpio_wake_enable(). And omap_gpio_wake_enable() will set/clear corresponding bit in GPIO_IRQWAKEN_x register. omapgpio6 configuration after boot - wakeup is enabled for GPIO IRQs by default from omap_gpio_irq_type: GPIO_IRQSTATUS_SET_0 | 0x00000400 GPIO_IRQSTATUS_CLR_0 | 0x00000400 GPIO_IRQWAKEN_0 | 0x00000400 GPIO_RISINGDETECT | 0x00000000 GPIO_FALLINGDETECT | 0x00000400 omapgpio6 configuration after after suspend/resume cycle: GPIO_IRQSTATUS_SET_0 | 0x00000400 GPIO_IRQSTATUS_CLR_0 | 0x00000400 GPIO_IRQWAKEN_0 | 0x00000000 <--- GPIO_RISINGDETECT | 0x00000000 GPIO_FALLINGDETECT | 0x00000400 As result, system will start to lose interrupts from pcf8575 GPIO expander, because when OMAP GPIO IP is in smart-idle wakeup mode, there is no guarantee that transition(s) on input non wake up GPIO pin will trigger asynchronous wake-up request to PRCM and then IRQ generation. IRQ will be generated when GPIO is in active mode - for example, some time after accessing GPIO bank registers IRQs will be generated normally, but issue will happen again once PRCM will put GPIO in low power smart-idle wakeup mode. Note 1. Issue is not reproduced if debounce clk is enabled for GPIO bank. Note 2. Issue hardly reproducible if GPIO pins group contains both wakeup/non-wakeup gpios - for example, it will be hard to reproduce issue with pin2 if GPIO_IRQWAKEN_0=0x1 GPIO_IRQSTATUS_SET_0=0x3 GPIO_FALLINGDETECT = 0x3 (TRM "Power Saving by Grouping the Edge/Level Detection"). Note 3. There nothing common bitween System wake up and OMAP GPIO bank IP wake up logic - the last one defines how the GPIO bank ON-IDLE-ON transition will happen inside SoC under control of PRCM. Hence, fix the problem by removing omap_set_gpio_wakeup() function completely and so keeping always in sync GPIO IRQ mask/unmask (IRQSTATUS_SET) and wake up enable (GPIO_IRQWAKEN) bits; and adding IRQCHIP_MASK_ON_SUSPEND flag in OMAP GPIO irqchip. That way non wakeup GPIO IRQs will be properly masked/unmask by IRQ PM core during suspend/resume cycle. Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09gpio: omap: drop dev field from gpio_bank structureGrygorii Strashko1-28/+29
GPIO chip structure already has "parent" field which is used for the same purpose as "dev" field in gpio_bank structure - store pointer on GPIO device. Hence, drop duplicated "dev" field from gpio_bank structure. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: omap: use gpiochip data pointerLinus Walleij1-10/+10
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-21Merge tag 'v4.4-rc6' into develLinus Walleij1-2/+0
Linux 4.4-rc6
2015-11-30gpio: omap: drop omap1 mpuio specific irq_mask/unmask callbacksGrygorii Strashko1-2/+0
Originally OMAP MPUIO GPIO irqchip was implemented using Generic irq chip, but after set of reworks Generic irq chip code was replaced by common OMAP GPIO implementation and finally removed by commit d2d05c65c40e ("gpio: omap: Fix regression for MPUIO interrupts"). Unfortunately, above commit left .irq_mask/unmask callbacks assigned as below for MPUIO GPIO case: irqc->irq_mask = irq_gc_mask_set_bit; irqc->irq_unmask = irq_gc_mask_clr_bit; This now causes boot failure on OMAP1 platforms, after commit 450fa54cfd66 ("gpio: omap: convert to use generic irq handler") which forces these callbacks to be called during GPIO IRQs mapping from gpiochip_irq_map: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 75 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0-rc1-e3-los_afe0c+-00002-g25379c0-dirty #1 Hardware name: Amstrad E3 (Delta) task: c1836000 ti: c1838000 task.ti: c1838000 PC is at irq_gc_mask_set_bit+0x1c/0x60 LR is at __irq_do_set_handler+0x118/0x15c pc : [<c004848c>] lr : [<c0047d4c>] psr: 600000d3 sp : c1839c90 ip : c1862c64 fp : c1839c9c r10: 00000000 r9 : c0411950 r8 : c0411bbc r7 : 00000000 r6 : c185c310 r5 : c00444e8 r4 : c185c300 r3 : c1854b50 r2 : 00000000 r1 : 00000000 r0 : c185c310 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 0000317f Table: 10004000 DAC: 00000057 Process swapper (pid: 1, stack limit = 0xc1838190) Stack: (0xc1839c90 to 0xc183a000) [...] Backtrace: [<c0048470>] (irq_gc_mask_set_bit) from [<c0047d4c>] (__irq_do_set_handler+0x118/0x15c) [<c0047c34>] (__irq_do_set_handler) from [<c0047dd4>] (__irq_set_handler+0x44/0x5c) r6:00000000 r5:c00444e8 r4:c185c300 [<c0047d90>] (__irq_set_handler) from [<c0047e1c>] (irq_set_chip_and_handler_name+0x30/0x34) r7:00000050 r6:00000000 r5:c00444e8 r4:00000050 [<c0047dec>] (irq_set_chip_and_handler_name) from [<c01b345c>] (gpiochip_irq_map+0x3c/0x8c) r7:00000050 r6:00000000 r5:00000050 r4:c1862c64 [<c01b3420>] (gpiochip_irq_map) from [<c0049670>] (irq_domain_associate+0x7c/0x1c4) r5:c185c310 r4:c185cb00 [<c00495f4>] (irq_domain_associate) from [<c0049894>] (irq_domain_add_simple+0x98/0xc0) r8:c0411bbc r7:c185cb00 r6:00000050 r5:00000010 r4:00000001 [<c00497fc>] (irq_domain_add_simple) from [<c01b3328>] (_gpiochip_irqchip_add+0x64/0x10c) r7:c1862c64 r6:c0419280 r5:c1862c64 r4:c1854b50 [<c01b32c4>] (_gpiochip_irqchip_add) from [<c01b79f4>] (omap_gpio_probe+0x2fc/0x63c) r5:c1854b50 r4:c1862c10 [<c01b76f8>] (omap_gpio_probe) from [<c01fcf58>] (platform_drv_probe+0x2c/0x64) r10:00000000 r9:c03e45e8 r8:00000000 r7:c0419294 r6:c0411984 r5:c0419294 r4:c0411950 [<c01fcf2c>] (platform_drv_probe) from [<c01fb668>] (really_probe+0x160/0x29c) Hence, fix it by remove obsolete callbacks assignment. After this change omap_gpio_mask_irq()/omap_gpio_unmask_irq() will be used for MPUIO IRQs masking, but this now happens anyway from omap_gpio_irq_startup/shutdown(). Cc: Tony Lindgren <tony@atomide.com> Fixes: commit d2d05c65c40e ("gpio: omap: Fix regression for MPUIO interrupts") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij1-2/+2
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16gpio: omap: fix static checker warningGrygorii Strashko1-1/+1
This patch fixes below static checker warning by changing type of irq field in struct gpio_bank from u16 to int. drivers/gpio/gpio-omap.c:1191 omap_gpio_probe() warn: assigning (-6) to unsigned variable 'bank->irq' drivers/gpio/gpio-omap.c 1188 bank->irq = platform_get_irq(pdev, 0); 1189 if (bank->irq <= 0) { bank->irq is u16. 1190 if (!bank->irq) 1191 bank->irq = -ENXIO; Does not work. 1192 if (bank->irq != -EPROBE_DEFER) Does not work. 1193 dev_err(dev, 1194 "can't get irq resource ret=%d\n", bank->irq); 1195 return bank->irq; 1196 } Fixes: commit 89d18e3af8b9: "gpio: omap: switch to use platform_get_irq" Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: omap: convert to use generic irq handlerGrygorii Strashko1-28/+27
This patch converts TI OMAP GPIO driver to use generic irq handler instead of chained IRQ handler. This way OMAP GPIO driver will be compatible with RT kernel where it will be forced thread IRQ handler while in non-RT kernel it still will be executed in HW IRQ context. As part of this change the IRQ wakeup configuration is applied to GPIO Bank IRQ as it now will be under control of IRQ PM Core during suspend. There are also additional benefits: - on-RT kernel there will be no complains any more about PM runtime usage in atomic context "BUG: sleeping function called from invalid context"; - GPIO bank IRQs will appear in /proc/interrupts and its usage statistic will be visible; - GPIO bank IRQs could be configured through IRQ proc_fs interface and, as result, could be a part of IRQ balancing process if needed; - GPIO bank IRQs will be under control of IRQ PM Core during suspend to RAM. Disadvantage: - additional runtime overhed as call chain till omap_gpio_irq_handler() will be longer now - necessity to use wa_lock in omap_gpio_irq_handler() to W/A warning in handle_irq_event_percpu() WARNING: CPU: 1 PID: 35 at kernel/irq/handle.c:149 handle_irq_event_percpu+0x51c/0x638() This patch doesn't fully follows recommendations provided by Sebastian Andrzej Siewior [1], because It's required to go through and check all GPIO IRQ pin states as fast as possible and pass control to handle_level_irq or handle_edge_irq. handle_level_irq or handle_edge_irq will perform actions specific for IRQ triggering type and wakeup corresponding registered threaded IRQ handler (at least it's expected to be threaded). IRQs can be lost if handle_nested_irq() will be used, because excecution time of some pin specific GPIO IRQ handler can be very significant and require accessing ext. devices (I2C). Idea of such kind reworking was also discussed in [2]. [1] http://www.spinics.net/lists/linux-omap/msg120665.html [2] http://www.spinics.net/lists/linux-omap/msg119516.html Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Austin Schuh <austin@peloton-tech.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: omap: move pm runtime in irq_chip.irq_bus_lock/sync_unlockGrygorii Strashko1-10/+15
The PM runtime API can't be used in atomic contex on -RT even if it's configured as irqsafe. As result, below error report can be seen when PM runtime API called from IRQ chip's callbacks irq_startup/irq_shutdown/irq_set_type, because they are protected by RAW spinlock: BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 1, irqs_disabled(): 128, pid: 96, name: insmod 3 locks held by insmod/96: #0: (&dev->mutex){......}, at: [<c04752c8>] __driver_attach+0x54/0xa0 #1: (&dev->mutex){......}, at: [<c04752d4>] __driver_attach+0x60/0xa0 #2: (class){......}, at: [<c00a408c>] __irq_get_desc_lock+0x60/0xa4 irq event stamp: 1834 hardirqs last enabled at (1833): [<c06ab2a4>] _raw_spin_unlock_irqrestore+0x88/0x90 hardirqs last disabled at (1834): [<c06ab068>] _raw_spin_lock_irqsave+0x2c/0x64 softirqs last enabled at (0): [<c003d220>] copy_process.part.52+0x410/0x19d8 softirqs last disabled at (0): [< (null)>] (null) Preemption disabled at:[< (null)>] (null) CPU: 1 PID: 96 Comm: insmod Tainted: G W O 4.1.3-rt3-00618-g57e2387-dirty #184 Hardware name: Generic DRA74X (Flattened Device Tree) [<c00190f4>] (unwind_backtrace) from [<c0014734>] (show_stack+0x20/0x24) [<c0014734>] (show_stack) from [<c06a62ec>] (dump_stack+0x88/0xdc) [<c06a62ec>] (dump_stack) from [<c006ca44>] (___might_sleep+0x198/0x2a8) [<c006ca44>] (___might_sleep) from [<c06ab6d4>] (rt_spin_lock+0x30/0x70) [<c06ab6d4>] (rt_spin_lock) from [<c04815ac>] (__pm_runtime_resume+0x68/0xa4) [<c04815ac>] (__pm_runtime_resume) from [<c04123f4>] (omap_gpio_irq_type+0x188/0x1d8) [<c04123f4>] (omap_gpio_irq_type) from [<c00a64e4>] (__irq_set_trigger+0x68/0x130) [<c00a64e4>] (__irq_set_trigger) from [<c00a7bc4>] (irq_set_irq_type+0x44/0x6c) [<c00a7bc4>] (irq_set_irq_type) from [<c00abbf8>] (irq_create_of_mapping+0x120/0x174) [<c00abbf8>] (irq_create_of_mapping) from [<c0577b74>] (of_irq_get+0x48/0x58) [<c0577b74>] (of_irq_get) from [<c0540a14>] (i2c_device_probe+0x54/0x15c) [<c0540a14>] (i2c_device_probe) from [<c04750dc>] (driver_probe_device+0x184/0x2c8) [<c04750dc>] (driver_probe_device) from [<c0475310>] (__driver_attach+0x9c/0xa0) [<c0475310>] (__driver_attach) from [<c0473238>] (bus_for_each_dev+0x7c/0xb0) [<c0473238>] (bus_for_each_dev) from [<c0474af4>] (driver_attach+0x28/0x30) [<c0474af4>] (driver_attach) from [<c0474760>] (bus_add_driver+0x154/0x200) [<c0474760>] (bus_add_driver) from [<c0476348>] (driver_register+0x88/0x108) [<c0476348>] (driver_register) from [<c0541600>] (i2c_register_driver+0x3c/0x90) [<c0541600>] (i2c_register_driver) from [<bf003018>] (pcf857x_init+0x18/0x24 [gpio_pcf857x]) [<bf003018>] (pcf857x_init [gpio_pcf857x]) from [<c000998c>] (do_one_initcall+0x128/0x1e8) [<c000998c>] (do_one_initcall) from [<c06a4220>] (do_init_module+0x6c/0x1bc) [<c06a4220>] (do_init_module) from [<c00dd0c8>] (load_module+0x18e8/0x21c4) [<c00dd0c8>] (load_module) from [<c00ddaa0>] (SyS_init_module+0xfc/0x158) [<c00ddaa0>] (SyS_init_module) from [<c000ff40>] (ret_fast_syscall+0x0/0x54) The IRQ chip interface defines only two callbacks which are executed in non-atomic contex - irq_bus_lock/irq_bus_sync_unlock, so lets move PM runtime calls there. Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Austin Schuh <austin@peloton-tech.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-18Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This is a rather large update post rc1 due to the final steps of cleanups and API changes which had to wait for the preparatory patches to hit your tree. - Regression fixes for ARM GIC irqchips - Regression fixes and lockdep anotations for renesas irq chips - The leftovers of the cleanup and preparatory patches which have been ignored by maintainers - Final conversions of the newly merged users of obsolete APIs - Final removal of obsolete APIs - Final removal of ARM artifacts which had been introduced during the conversion of ARM to the generic interrupt code. - Final split of the irq_data into chip specific and common data to reflect the needs of hierarchical irq domains. - Treewide removal of the first argument of interrupt flow handlers, i.e. the irq number, which is not used by the majority of handlers and simple to retrieve from the other argument the irq descriptor. - A few comment updates and build warning fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) arm64: Remove ununsed set_irq_flags ARM: Remove ununsed set_irq_flags sh: Kill off set_irq_flags usage irqchip: Kill off set_irq_flags usage gpu/drm: Kill off set_irq_flags usage genirq: Remove irq argument from irq flow handlers genirq: Move field 'msi_desc' from irq_data into irq_common_data genirq: Move field 'affinity' from irq_data into irq_common_data genirq: Move field 'handler_data' from irq_data into irq_common_data genirq: Move field 'node' from irq_data into irq_common_data irqchip/gic-v3: Use IRQD_FORWARDED_TO_VCPU flag irqchip/gic: Use IRQD_FORWARDED_TO_VCPU flag genirq: Provide IRQD_FORWARDED_TO_VCPU status flag genirq: Simplify irq_data_to_desc() genirq: Remove __irq_set_handler_locked() pinctrl/pistachio: Use irq_set_handler_locked gpio: vf610: Use irq_set_handler_locked powerpc/mpc8xx: Use irq_set_handler_locked() powerpc/ipic: Use irq_set_handler_locked() powerpc/cpm2: Use irq_set_handler_locked() ...
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-1/+1
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-14gpio: omap: Fix GPIO numbering for deferred probeTony Lindgren1-1/+3
If gpio-omap probe fails with -EPROBE_DEFER, the GPIO numbering keeps increasing. Only increase the gpio count if gpiochip_add() was successful as otherwise the numbers will increase for each probe attempt. Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: omap: Fix gpiochip_add() handling for deferred probeTony Lindgren1-1/+4
Currently we gpio-omap breaks if gpiochip_add() returns -EPROBE_DEFER: [ 0.570000] gpiochip_add: GPIOs 0..31 (gpio) failed to register [ 0.570000] omap_gpio 48310000.gpio: Could not register gpio chip -517 ... [ 3.670000] omap_gpio 48310000.gpio: Unbalanced pm_runtime_enable! Let's fix the issue by adding the missing pm_runtime_put() on error. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-26gpio: omap: fix clk_prepare/unprepare usageGrygorii Strashko1-9/+18
As per CCF documentation (clk.txt) the clk_prepare/unprepare APIs are not allowed in atomic context. But now OMAP GPIO driver uses them while applying debounce settings and as part of PM runtime irqsafe operations: - omap_gpio_debounce() is holding the lock with IRQs off. + omap2_set_gpio_debounce() + clk_prepare_enable() + clk_prepare() this one might sleep. - pm_runtime_get_sync() is holding the lock with IRQs off + omap_gpio_runtime_suspend() + raw_spin_lock_irqsave() + omap_gpio_dbck_disable() + clk_disable_unprepare() Hence, fix it by moeving dbclk prepare/unprepare in OMAP GPIO omap_gpio_probe/omap_gpio_remove. Also, while here, ensure that debounce functionality is disabled if clk_get() failed, because otherwise kernel will carsh in omap2_set_gpio_debounce(). Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-26gpio: omap: protect regs access in omap_gpio_irq_handlerGrygorii Strashko1-0/+8
The access to HW registers has to be be protected in omap_gpio_irq_handler(), as it may race with code executed on another CPUs. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-26gpio: omap: fix omap2_set_gpio_debounceGrygorii Strashko1-9/+10
According to TRMs: Required input line stable = (the value of the GPIO_DEBOUNCINGTIME[7:0].DEBOUNCETIME + 1) × 31, where the value of the GPIO_DEBOUNCINGTIME[7:0].DEBOUNCETIME bit field is from 0 to 255. But now omap2_set_gpio_debounce() will calculate debounce time and behave incorrectly in the following cases: 1) requested debounce time is !0 and <32 calculated DEBOUNCETIME = 0x1 == 62 us; expected value of DEBOUNCETIME = 0x0 == 31us 2) requested debounce time is 0 calculated DEBOUNCETIME = 0x1 == 62 us; expected: disable debounce and DEBOUNCETIME = 0x0 3) requested debounce time is >32 and <63 calculated DEBOUNCETIME = 0x0 and debounce will be disabled; expected: enable debounce and DEBOUNCETIME = 0x1 == 62 us Hence, rework omap2_set_gpio_debounce() to fix above cases: 1) introduce local variable "enable" and use it to identify when debounce need to be enabled or disabled. Disable debounce if requested debounce time is 0. 2) use below formula for debounce time calculation: debounce = (DIV_ROUND_UP(debounce, 31) - 1) & 0xFF; Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-26gpio: omap: switch to use platform_get_irqGrygorii Strashko1-5/+8
Switch OMAP GPIO driver to use platform_get_irq(), because it is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ, ..) for requesting IRQ resources any more, as they can be not ready yet in case of DT-boot. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-26gpio: omap: remove wrong irq_domain_remove usage in probeGrygorii Strashko1-1/+0
The bank->chip.irqdomain is uninitialized at the moment when irq_domain_remove() is called, so remove this call. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>