summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10_3.c
AgeCommit message (Collapse)AuthorFilesLines
2023-06-09drm/amdkfd: add debug set and clear address watch points operationJonathan Kim1-2/+3
Shader read, write and atomic memory operations can be alerted to the debugger as an address watch exception. Allow the debugger to pass in a watch point to a particular memory address per device. Note that there exists only 4 watch points per devices to date, so have the KFD keep track of what watch points are allocated or not. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: add debug wave launch mode operationJonathan Kim1-1/+2
Allow the debugger to set wave behaviour on to either normally operate, halt at launch, trap on every instruction, terminate immediately or stall on allocation. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: add debug wave launch override operationJonathan Kim1-1/+4
This operation allows the debugger to override the enabled HW exceptions on the device. On debug devices that only support the debugging of a single process, the HW exceptions are global and set through the SPI_GDBG_TRAP_MASK register. Because they are global, only address watch exceptions are allowed to be enabled. In other words, the debugger must preserve all non-address watch exception states in normal mode operation by barring a full replacement override or a non-address watch override request. For multi-process debugging, all HW exception overrides are per-VMID so all exceptions can be overridden or fully replaced. In order for the debugger to know what is permissible, returned the supported override mask back to the debugger along with the previously enable overrides. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add configurable grace period for unmap queuesJonathan Kim1-0/+2
The HWS schedule allows a grace period for wave completion prior to preemption for better performance by avoiding CWSR on waves that can potentially complete quickly. The debugger, on the other hand, will want to inspect wave status immediately after it actively triggers preemption (a suspend function to be provided). To minimize latency between preemption and debugger wave inspection, allow immediate preemption by setting the grace period to 0. Note that setting the preepmtion grace period to 0 will result in an infinite grace period being set due to a CP FW bug so set it to 1 for now. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add gfx10 hw debug mode enable and disable callsJonathan Kim1-145/+3
Similar to GFX9 debug devices, set the hardware debug mode by draining the SPI appropriately prior the mode setting request. Because GFX10 has waves allocated by the work group boundary and each SE's SPI instances do not communicate, the SPI drain time is much longer. This long drain time will be fixed for GFX11 onwards. Also remove a bunch of deprecated misplaced references for GFX10.3. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: Add XCC instance to kgd2kfd interface (v3)Mukul Joshi1-12/+15
Gfx 9 starts to have multiple XCC instances in one device. Add instance parameter to kgd2kfd functions where XCC instance was hard coded as 0. Also, update code to pass the correct instance number when running on a multi-XCC setup. v2: introduce the XCC instance to gfx v11 (Morris) v3: rebase (Alex) Signed-off-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amdgpu: convert gfx.kiq to array type (v3)Le Ma1-3/+3
v1: more kiq instances are a available in SOC (Le) v2: squash commits to avoid breaking the build (Le) v3: make the conversion for gfx/mec v11_0 (Hawking) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-04drm/amdkfd: implement get_atc_vmid_pasid_mapping_info for gfx10.3Yifan Zhang1-1/+15
This patch implements get_atc_vmid_pasid_mapping_info for gfx10.3 Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-10drm/amdkfd: Remove unused old debugger implementationMukul Joshi1-25/+0
Cleanup the kfd code by removing the unused old debugger implementation. The address watch was only ever implemented in the upstream driver for GFXv7 (Kaveri). The user mode tools runtime using this API was never open-sourced. Work on the old debugger prototype that used this API has been discontinued years ago. Only a small piece of resetting wavefronts is kept and is moved to kfd_device_queue_manager.c. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-18drm/amdkfd: replace/remove remaining kgd_dev referencesGraham Sider1-5/+0
Remove get_amdgpu_device and other remaining kgd_dev references aside from declaration/kfd struct entry and initialization. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-18drm/amdkfd: replace kgd_dev in various kfd2kgd funcsGraham Sider1-33/+16
Modified definitions: - program_sh_mem_settings - set_pasid_vmid_mapping - init_interrupts - address_watch_disable - address_watch_execute - wave_control_execute - address_watch_get_offset - get_atc_vmid_pasid_mapping_info - set_scratch_backing_va - set_vm_context_page_table_base - read_vmid_from_vmfault_reg - get_cu_occupancy - program_trap_handler_settings Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-18drm/amdkfd: replace kgd_dev in hqd/mqd kfd2kgd funcsGraham Sider1-22/+15
Modified definitions: - hqd_load - hiq_mqd_load - hqd_sdma_load - hqd_dump - hqd_sdma_dump - hqd_is_occupied - hqd_destroy - hqd_sdma_is_occupied - hqd_sdma_destroy Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-18drm/amdkfd: replace kgd_dev in static gfx v10_3 funcsGraham Sider1-29/+23
Static funcs in amdgpu_amdkfd_gfx_v10_3.c now using amdgpu_device. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-12drm/amdkfd: CWSR with software schedulerMukul Joshi1-0/+31
This patch adds support to program trap handler settings when loading driver with software scheduler (sched_policy=2). Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Suggested-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-04drm/amdgpu: Modify GC register access to use _SOC15 macrosRohit Khaire1-21/+21
In SRIOV environment, KMD should access GC registers with RLCG if GC indirect access flag enabled. Using _SOC15 read/write macros ensures that they go through RLC when flag is enabled. Signed-off-by: Rohit Khaire <rohit.khaire@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-21drm/amdkfd: correct sienna_cichlid SDMA RLC register offset errorKevin Wang1-6/+6
1.correct KFD SDMA RLC queue register offset error. (all sdma rlc register offset is base on SDMA0.RLC0_RLC0_RB_CNTL) 2.HQD_N_REGS (19+6+7+12) 12: the 2 more resgisters than navi1x (SDMAx_RLCy_MIDCMD_DATA{9,10}) the patch also can be fixed NULL pointer issue when read /sys/kernel/debug/kfd/hqds on sienna_cichlid chip. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amdgpu: remove redundant include of navi10_enumLikun Gao1-1/+0
Remove unnecessary include of navi10_enum header file. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-30drm/amdgpu: use function pointer for gfxhub functionsOak Zeng1-2/+1
gfxhub functions are now called from function pointers, instead of from asic-specific functions. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-08Merge tag 'amd-drm-next-5.10-2020-09-03' of ↵Dave Airlie1-1/+0
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-next-5.10-2020-09-03: amdgpu: - RAS fixes - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support in DC - Enable plane rotation - Rework pre-OS vram reservation handling during driver init - Add standard interface to dump GPU metrics table from SMU - Rework tiling and tmz state handling in atomic commits - Pstate fixes - Add voltage and power hwmon interfaces for renoir - SW CTF fixes - S/G display fix for Raven - Print client strings for vmfaults for vega and newer - Manual fan control fixes - Display updates - Reorg power management directory structure - Misc bug fixes - Misc code cleanups amdkfd: - Topology fixes - Add SMI events for thermal throttling and GPU resets radeon: - switch from pci_* to dma_* for dma allocations - PLL fix Scheduler: - Clean up priority levels UAPI: - amdgpu INFO IOCTL query update for TMZ state https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6049 - amdkfd SMI event interface updates https://github.com/RadeonOpenCompute/rocm_smi_lib/tree/therm_thrott From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200903222921.4152-1-alexander.deucher@amd.com
2020-08-26drm/amdkfd: call amdgpu_amdkfd_get_hive_id directlyFelix Kuehling1-1/+0
No need to use a function pointer because the implementation is not ASIC-specific. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-01drm/amdkfd: Support Sienna_Cichlid KFD v4Yong Zhao1-0/+834
v4: drop get_tile_config, comment out other callbacks Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-24 14:10:22 +0300