| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The MES cached process context must be cleared on adding any queue for
the first time.
For proper debug support, the MES will clear it's cached process context
on the first call to SET_SHADER_DEBUGGER.
This allows TTMPs to be pesistently enabled in a safe manner.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Eric Huang <jinhuieric@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the list of devices that require the cwsr trap handling
workaround for debugging use cases.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Ruili Ji <ruili.ji@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Similar to GC v9.4.2, GC v9.4.3 should use the 5-Dword extended
MAP_PROCESS packet to support multi-process debugging. Update the
mutli-process debug support list so that the KFD updates the runlist
on debug mode setting and that it allocates enough GTT memory during
KFD device initialization.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Similar to queue snapshot, return an array of device information using
an entry_size check and return.
Unlike queue snapshots, the debugger needs to pass to correct number of
devices that exist. If it fails to do so, the KFD will return the
number of actual devices so that the debugger can make a subsequent
successful call.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allow the debugger to query additional info based on an exception code.
For device exceptions, it's currently only memory violation information.
For process exceptions, it's currently only runtime information.
Queue exception only report the queue exception status.
The debugger has the option of clearing the target exception on query.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allow the debugger to query a single queue, device and process
exception.
The KFD should also return the GPU or Queue id of the exception.
The debugger also has the option of clearing exceptions after
being queried.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allow the debugger to set single memory and single ALU operations.
Some exceptions are imprecise (memory violations, address watch) in the
sense that a trap occurs only when the exception interrupt occurs and
not at the non-halting faulty instruction. Trap temporaries 0 & 1 save
the program counter address, which means that these values will not point
to the faulty instruction address but to whenever the interrupt was
raised.
Setting the Single Memory Operations flag will inject an automatic wait
on every memory operation instruction forcing imprecise memory exceptions
to become precise at the cost of performance. This setting is not
permitted on debug devices that support only a global setting of this
option.
Return the previous set flags to the debugger as well.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Shader read, write and atomic memory operations can be alerted to the
debugger as an address watch exception.
Allow the debugger to pass in a watch point to a particular memory
address per device.
Note that there exists only 4 watch points per devices to date, so have
the KFD keep track of what watch points are allocated or not.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allow the debugger to set wave behaviour on to either normally operate,
halt at launch, trap on every instruction, terminate immediately or
stall on allocation.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This operation allows the debugger to override the enabled HW
exceptions on the device.
On debug devices that only support the debugging of a single process,
the HW exceptions are global and set through the SPI_GDBG_TRAP_MASK
register.
Because they are global, only address watch exceptions are allowed to
be enabled. In other words, the debugger must preserve all non-address
watch exception states in normal mode operation by barring a full
replacement override or a non-address watch override request.
For multi-process debugging, all HW exception overrides are per-VMID so
all exceptions can be overridden or fully replaced.
In order for the debugger to know what is permissible, returned the
supported override mask back to the debugger along with the previously
enable overrides.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The debugger subscibes to nofication for requested exceptions on attach.
Allow the debugger to change its subsciption later on.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The debugger must be notified by any debugger subscribed exception
that comes from hardware interrupts.
If a debugger session exits, any exceptions it subscribed to may still
have interrupts in the interrupt ring buffer or KGD/KFD pipeline.
To prevent a new session from inheriting stale interrupts, when a new
queue is created, open an interrupt drain and allow the IH ring to drain
from a timestamped checkpoint. Then inject a custom IV so that once
the custom IV is picked up by the KFD, it's safe to close the drain
and proceed with queue creation.
The drain must also be on debug disable as SW interrupts may still
be processed. Drain at this time and clear all the exception status.
The debugger may also not be attached nor subscibed to certain
exceptions so forward them directly to the runtime.
GFX10 also requires its own IV processing, hence the creation of
kfd_int_process_v10.c. This is because the IV from SQ interrupts are
packed into a new continguous format unlike GFX9. To make this clear,
a separate interrupting handling code file was created.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The debugger can attach to a process prior to HSA enablement (i.e.
inferior is spawned by the debugger and attached to immediately before
target process has been enabled for HSA dispatches) or it
can attach to a running target that is already HSA enabled. Either
way, the debugger needs to know the enablement status to know when
it can inspect queues.
For the scenario where the debugger spawns the target process,
it will have to wait for ROCr's runtime enable request from the target.
The runtime enable request will be able to see that its process has been
debug attached. ROCr raises an EC_PROCESS_RUNTIME signal to the
debugger then blocks the target process while waiting the debugger's
response. Once the debugger has received the runtime signal, it will
unblock the target process.
For the scenario where the debugger attaches to a running target
process, ROCr will set the target process' runtime status as enabled so
that on an attach request, the debugger will be able to see this
status and will continue with debug enablement as normal.
A secondary requirement is to conditionally enable the trap tempories only
if the user requests it (env var HSA_ENABLE_DEBUG=1) or if the debugger
attaches with HSA runtime enabled. This is because setting up the trap
temporaries incurs a performance overhead that is unacceptable for
microbench performance in normal mode for certain customers.
In the scenario where the debugger spawns the target process, when ROCr
detects that the debugger has attached during the runtime enable
request, it will enable the trap temporaries before it blocks the target
process while waiting for the debugger to respond.
In the scenario where the debugger attaches to a running target process,
it will enable to trap temporaries itself.
Finally, there is an additional restriction that is required to be
enforced with runtime enable and HW debug mode setting. The debugger must
first ensure that HW debug mode has been enabled before permitting HW debug
mode operations.
With single process debug devices, allowing the debugger to set debug
HW modes prior to trap activation means that debug HW mode setting can
occur before the KFD has reserved the debug VMID (0xf) from the hardware
scheduler's VMID allocation resource pool. This can result in the
hardware scheduler assigning VMID 0xf to a non-debugged process and
having that process inherit debug HW mode settings intended for the
debugged target process instead, which is both incorrect and potentially
fatal for normal mode operation.
With multi process debug devices, allowing the debugger to set debug
HW modes prior to trap activation means that non-debugged processes
migrating to a new VMID could inherit unintended debug settings.
All debug operations that touch HW settings must require trap activation
where trap activation is triggered by both debug attach and runtime
enablement (target has KFD opened and is ready to dispatch work).
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a debug operation that allows the debugger to send an exception
directly to runtime through a payload address.
For memory violations, normal vmfault signals will be applied to
notify runtime instead after passing in the saved exception data
when a memory violation was raised to the debugger.
For runtime exceptions, this will unblock the runtime enable
function which will be explained and implemented in a follow up
patch.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Exception events can be generated from interrupts or queue activitity.
The raise event function will save exception status of a queue, device
or process then notify the debugger of the status change by writing to
a debugger polled file descriptor that the debugger provides during
debug attach.
For memory violation exceptions, extra exception data will be saved.
The debugger will be able to query the saved exception states by query
operation that will be provided by follow up patches.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Due to a HW bug, waves in only half the shader arrays can enter trap.
When starting a debug session, relocate all waves to the first shader
array of each shader engine and mask off the 2nd shader array as
unavailable.
When ending a debug session, re-enable the 2nd shader array per
shader engine.
User CU masking per queue cannot be guaranteed to remain functional
if requested during debugging (e.g. user cu mask requests only 2nd shader
array as an available resource leading to zero HW resources available)
nor can runtime be alerted of any of these changes during execution.
Make user CU masking and debugging mutual exclusive with respect to
availability.
If the debugger tries to attach to a process with a user cu masked
queue, return the runtime status as enabled but busy.
If the debugger tries to attach and fails to reallocate queue waves to
the first shader array of each shader engine, return the runtime status
as enabled but with an error.
In addition, like any other mutli-process debug supported devices,
disable trap temporary setup per-process to avoid performance impact from
setup overhead.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To enable HW debug mode per process, all devices must be debug enabled
successfully. If a failure occures, rewind the enablement of debug mode
on the enabled devices.
A power management scenario that needs to be considered is HW
debug mode setting during GFXOFF. During GFXOFF, these registers
will be unreachable so we have to transiently disable GFXOFF when
setting. Also, some devices don't support the RLC save restore
function for these debug registers so we have to disable GFXOFF
completely during a debug session.
Cooperative launch also has debugging restriction based on HW/FW bugs.
If such bugs exists, the debugger cannot attach to a process that uses GWS
resources nor can GWS resources be requested if a process is being
debugged.
Multi-process debug devices can only enable trap temporaries based
on certain runtime scenerios, which will be explained when the
runtime enable functions are implemented in a follow up patch.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Unlike single process debug devices, multi-process debug devices allow
debug mode setting per-VMID (non-device-global).
Because the HWS manages PASID-VMID mapping, the new MAP_PROCESS API allows
the KFD to forward the required SPI debug register write requests.
To request a new debug mode setting change, the KFD must be able to
preempt all queues then remap all queues with these new setting
requests for MAP_PROCESS to take effect.
Note that by default, trap enablement in non-debug mode must be disabled
for performance reasons for multi-process debug devices due to setup
overhead in FW.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The ROCm debugger will attach to a process to debug by PTRACE and will
expect the KFD to prepare a process for the target PID, whether the
target PID has opened the KFD device or not.
This patch is to explicity handle this requirement. Further HW mode
setting and runtime coordination requirements will be handled in
following patches.
In the case where the target process has not opened the KFD device,
a new KFD process must be created for the target PID.
The debugger as well as the target process for this case will have not
acquired any VMs so handle process restoration to correctly account for
this.
To coordinate with HSA runtime, the debugger must be aware of the target
process' runtime enablement status and will copy the runtime status
information into the debugged KFD process for later query.
On enablement, the debugger will subscribe to a set of exceptions where
each exception events will notify the debugger through a pollable FIFO
file descriptor that the debugger provides to the KFD to manage.
Finally on process termination of either the debugger or the target,
debugging must be disabled if it has not been done so.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
