| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm subsystems for 6.10.
In drivers the main thing is a new driver for ARM Mali firmware based
GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
scattered changes to everything else.
In the core a bunch of headers and Kconfig was refactored, along with
the addition of a new panic handler which is meant to provide a user
friendly message when a panic happens and graphical display is
enabled.
New drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
Core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing"
* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
drm/xe/ads: Use flexible-array
drm/xe: Use ordered WQ for G2H handler
drm/msm/gen_header: allow skipping the validation
drm/msm/a6xx: Cleanup indexed regs const'ness
drm/msm: Add devcoredump support for a750
drm/msm: Adjust a7xx GBIF debugbus dumping
drm/msm: Update a6xx registers XML
drm/msm: Fix imported a750 snapshot header for upstream
drm/msm: Import a750 snapshot registers from kgsl
MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
drm/msm/adreno: fix CP cycles stat retrieval on a7xx
drm/msm/a7xx: allow writing to CP_BV counter selection registers
drm: zynqmp_dpsub: Always register bridge
Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
drm/fbdev-generic: Do not set physical framebuffer address
drm/panthor: Fix the FW reset logic
drm/panthor: Make sure we handle 'unknown group state' case properly
...
|
|
[Why]
Idle optimizations are blocked if there's more than one eDP connector
on the board - blocking S0i3 and IPS2 for static screen.
[How]
Fix the checks to correctly detect number of active eDP.
Also restrict the eDP support to panels that have correct feature
support.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes 29 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes 49 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit removes an unnecessary NULL check in the
`dcn20_set_input_transfer_func` function in the `dcn20_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
The plane_state->in_transfer_func itself cannot be NULL because it's a
structure, not a pointer. When we do tf =
&plane_state->in_transfer_func;, we're getting the address of that
structure, which will always be valid as long as plane_state itself is
not NULL.
we've already checked if plane_state is NULL with the line if (dpp_base
== NULL || plane_state == NULL) return false;. So, if the code execution
gets to the point where tf = &plane_state->in_transfer_func; is called,
plane_state is guaranteed to be not NULL, and therefore tf will also not
be NULL.
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn20/dcn20_hwseq.c
1094 bool dcn20_set_input_transfer_func(struct dc *dc,
1095 struct pipe_ctx *pipe_ctx,
1096 const struct dc_plane_state *plane_state)
1097 {
1098 struct dce_hwseq *hws = dc->hwseq;
1099 struct dpp *dpp_base = pipe_ctx->plane_res.dpp;
1100 const struct dc_transfer_func *tf = NULL;
^^^^^^^^^ This assignment is not necessary now.
1101 bool result = true;
1102 bool use_degamma_ram = false;
1103
1104 if (dpp_base == NULL || plane_state == NULL)
1105 return false;
1106
1107 hws->funcs.set_shaper_3dlut(pipe_ctx, plane_state);
1108 hws->funcs.set_blend_lut(pipe_ctx, plane_state);
1109
1110 tf = &plane_state->in_transfer_func;
^^^^^
Before there was an if statement but now tf is assigned unconditionally
1111
--> 1112 if (tf == NULL) {
^^^^^^^^^^^^^^^^^
so these conditions are impossible.
1113 dpp_base->funcs->dpp_set_degamma(dpp_base,
1114 IPP_DEGAMMA_MODE_BYPASS);
1115 return true;
1116 }
1117
1118 if (tf->type == TF_TYPE_HWPWL || tf->type == TF_TYPE_DISTRIBUTED_POINTS)
1119 use_degamma_ram = true;
1120
1121 if (use_degamma_ram == true) {
1122 if (tf->type == TF_TYPE_HWPWL)
1123 dpp_base->funcs->dpp_program_degamma_pwl(dpp_base,
Fixes the below Smatch static checker warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn20/dcn20_hwseq.c:1112 dcn20_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf81 ("drm/amd/display: Remove plane and stream pointers from dc scratch")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
According to [1]:
```
DTN only logs 'pipe_count' instances of MPCC. However in some cases
there are different number of MPCC than DPP (pipe_count).
```
As DTN log still relies on pipe_count to print mpcc state, switch to
mpcc_count in all occurrences.
[1] https://lore.kernel.org/amd-gfx/20240328195047.2843715-39-Roman.Li@amd.com/
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rework part of the modifications made to the power sequence and resource
allocation logic.
Reviewed-by: Xi (Alex) Liu <xi.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Need to update the power sequence to help prevent potential issues
like multi-display or multi-plane.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
Changes to support future versions of FAMS.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Enabling higher compiler warning levels results in many issues that can
be trivially resolved as well as some potentially critical issues.
[how]
Fix all compiler warnings found with various compilers and higher
warning levels. Primarily, potentially uninitialized variables and
unreachable code.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
corruption
[Why and how]
External display has corruption because no root clock control function. Add the function pointer to fix the issue.
Reviewed-by: Daniel Miess <daniel.miess@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Xi (Alex) Liu <xi.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why && How]
OTG can be disabled before setting dpms on. Add check to skip wait
when setting AV mute if OTG is disabled.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Enable root clock optimization for HDMISTREAMCLK and only
disable it when it's actively being used.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
As per programming guide, we need to
enable the virtual pixel clock via DTBCLK
DTO and ungate the clock before we begin
programming OPP/OPTC control registers.
Otherwise, the double-buffered registers
will be left pending until the clocks are enabled.
[how]
Move the DTBCLK DTO programming up to
where we do the legacy DP DTO programming.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
Update dmub and driver interface for future FAMS revisions.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
With root clock optimization now enabled for DCN35 there
are still RCO registers still not being toggled
[How]
Add in logic to toggle RCO registers for DPPCLK,
DPSTREAMCLK and DSCCLK
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
Modified definitions of 1 function and 2 structs to remove warnings on
certain specific compiler configurations due to redefinition.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Mounika Adhuri <moadhuri@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
MPC flow rate control is not needed for DCN30 and above. Current logic
that uses it can result in underflow for certain edge cases (such as
DSC N422 + ODM combine + 422 left edge pixel).
[How]
Remove MPC flow rate control logic and programming for DCN30 and above.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
There were some fixes in dcn35 that need
to be ported over to dcn351 to prevent any
regression.
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Reviewed-by: Liu, Xi (Alex) <xiliu102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Disabling stream encoder invokes a function that no longer exists.
[How]
Check if the function declaration is NULL in disable stream encoder.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
Converting the watermark set structure to a union and modifying some interfaces
to accommodate future usage.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
Remove several plane and stream pointers from dc for code
refactoring.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
MPC flow rate control is not needed for DCN30 and above. Current logic
that uses it can result in underflow for certain edge cases (such as
DSC N422 + ODM combine + 422 left edge pixel).
[How]
Remove MPC flow rate control logic and programming for DCN30 and above.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
These additional callbacks to DC will be required for the DML2 wrapper. Also
consolidate common callbacks for projects to a single location for maintenance.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why&how]
We need to remove the reference to these registers to
prevent any usage in the future.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
transitions.
[WHY]
Previously, we'd disabled HPO whenever an HPO display was disconnected. This
caused other HPO displays to blank whenever one was unplugged.
[HOW]
This change restricts HPO enable/disable to dce110_apply_ctx_to_hw and adds a
helper function (dce110_is_hpo_enabled) that returns true if any HPO displays
are present in a context. We compare the current and previous dc ctx to check
whether HPO is transitioning from on to off or vice versa, and adjust the HPO
state accordingly.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
There were some fixes in dcn35 that need
to be ported over to dcn351 to prevent any
regression.
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Reviewed-by: Liu, Xi (Alex) <xiliu102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
There is a corner case where a single PSR panel
fails to enter idle optimizations if the panel
is not flipping (no planes or DPMS_OFF == true).
This is because the panel will not enter PSR if it's
not flipping, but this will prevent the FW idle opt
path from being executed. To handle this case we will
allow entry to idle opt from driver side even when a
PSR panel is connected under the following scenarios:
1. Only a single PSR panel is connected
2. PSR panel is not flipping
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Disabling stream encoder invokes a function that no longer exists.
[How]
Check if the function declaration is NULL in disable stream encoder.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During init_pipes, otg master is not initialized. So mpc tree is
still configured even if mpc bottom is not active
[How]
For pipes that have tg enabled, check their mpc tree and clear
opp_list if mpc bottom is not active
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
pipe_ctx->plane_res.mpcc_inst is of a type that can only hold values
between 0 and 255, so it's always greater than or equal to 0.
Thus the condition 'pipe_ctx->plane_res.mpcc_inst >= 0' was always true
and has been removed.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn35/dcn35_hwseq.c:1023 dcn35_calc_blocks_to_gate() warn: always true condition '(pipe_ctx->plane_res.mpcc_inst >= 0) => (0-255 >= 0)'
Fixes: 6f8b7565cca4 ("drm/amd/display: Add DCN35 HWSEQ")
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 54d9490314af ("drm/amd/display: Set the power_down_on_boot
function pointer to null")
[why & how]
This commit breaks S0i3 entry because DCN does not enter IPS2.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Blackscreen hang @ PC EF000025 when trying to wake up from S0i3. DCN
gets powered off due to dc_power_down_on_boot() being called after
timeout.
[HOW]
Setting the power_down_on_boot function pointer to null since we don't
expect the function to be called for APU.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
We want to support low hz case, but the original
vtotal/vtotal_min/vtotal_max can't support more
than 0x7FFF.
[HOW]
We use the 2 HW reg to contorl long vblank case.
1. OTG_V_COUNT_STOP_CONTROL -> vcount_stop
2. OTG_V_COUNT_STOP_CONTROL2 -> vcount_stop_timer
vcount_stop define from which line we stop using vcount
and start using vcount2.
vcount_stop_timer define how long we use vcount2.
Ex:
Vtotal = 7
OTG_V_COUNT_STOP_CONTROL = 4
OTG_V_COUNT_STOP_CONTROL2 = 5
time : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
vcount : 0, 1, 2, 3, - - - - - 4, 5, 6
vcount2 : 0, 1, 2, 3, 4,
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Robin Chen<robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit e2fdd5c5257d ("drm/amd/display: Add left edge pixel for
YCbCr422/420 + ODM pipe split")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.
Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.
[HOW]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When mode switching is triggered there is momentary noise visible on
some HDMI TV or displays.
[How]
Wait for 2 frames to make sure we have enough time to send out AV mute
and sink receives a full frame.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Odm update is doubled buffered. We need to wait for ODM update to be
completed before optimizing bandwidth or programming new udpates.
[HOW]
implement wait_for_odm_update_pending_complete function to wait for:
1. odm configuration update is no longer pending in timing generator.
2. no pending dpg pattern update for each active OPP.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
On DCN32 we support dynamic ODM even when OTG is blanked. When ODM
configuration is dynamically changed and the OTG is on blank pattern,
we will need to reprogram OPP's test pattern based on new ODM
configuration. Therefore we need to lock the OTG pipe to avoid temporary
corruption when we are reprogramming OPP blank patterns.
[HOW]
Add a new interdependent update lock implementation to lock all enabled
OTG pipes even when there is no plane on the OTG for DCN32.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
pipe with no plane
[WHY]
When committing an update with ODM combine change when the plane is
removing or already removed, we fail to detect odm change in pipe
update flags. This has caused mismatch between new dc state and the
actual hardware state, because we missed odm programming.
[HOW]
- Detect odm change even for otg master pipe without a plane.
- Update odm config before calling program pipes for pipe with planes.
The commit also updates blank pattern programming when odm is changed
without plane. This is because number of OPP is changed when ODM
combine is changed. Blank pattern is per OPP so we will need to
reprogram OPP based on the new pipe topology.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add DC support for DCN 3.5.1.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why/How]
A regression was identified with the change to add left edge pixel for
YCbCr422/420 + ODM combine cases.
This reverts commit 288c0254a0b0c9980dba9df7d5afadf27280b99c
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
When clip size is changed recout and viewport size would require an
update. When the update is clip size only current driver fails to
program the update into hardware.
[how]
Set a new clip_size_change flag when it is detected and set MED update
type and reprogram scaling params in next program pipe.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These ANDs should be ORs or it will lead to a NULL dereference.
Fixes: fb5a3d037082 ("drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'")
Fixes: 886571d217d7 ("drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'")
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some of the CONFIG_DRM_AMD_DC_FP was added in some non-related FPU code,
which may cause confusion. This commit dropped some of the unnecessary
guards.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Previously we would call apply_ctx_to_hw to enable and disable
phantom pipes. However, apply_ctx_to_hw can potentially update
non-phantom pipes as well which is undesired. Instead of calling
apply_ctx_to_hw as a whole, call the relevant helpers for each
phantom pipe when enabling / disabling which will avoid us modifying
hardware state for non-phantom pipes unknowingly.
The use case is for an FRL display where FRL_Update is requested
by the display. In this case link_state_valid flag is cleared in
a passive callback thread and should be handled in the next stream /
link update. However, due to the call to apply_ctx_to_hw for the
phantom pipes during a flip, the main pipes were modified outside
of the desired sequence (driver does not handle link_state_valid = 0
on flips).
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 6b2b782ad6a25734ae847d1659bea3f613dbb563.
Since, it was causing regression for some DRR scenarios.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.
Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.
[How]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Hardware register definition changed
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Allen Pan <allen.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
