Age | Commit message (Collapse) | Author | Files | Lines |
|
This commit just introduce some basic comments that helps to understand
the overall behavior of some structs.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Future implementations will require a distinction between AC power and
DC power (wall power and battery power, respectively). To accomplish this,
adding a power mode parameter to certain dc interfaces, and adding a
separate DML2 instance for DC mode validation. Default behaviour unchanged.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
Converting the watermark set structure to a union and modifying some interfaces
to accommodate future usage.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
These additional callbacks to DC will be required for the DML2 wrapper. Also
consolidate common callbacks for projects to a single location for maintenance.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Since the backup and restore for plane and stream states has
a significant amount of data to copy, we will change the backup
and restore sequence to only take place during full updates.
We will also move the scratch memory to struct dc instead of dc_state
to avoid needing to allocate large amounts of memory every time
we create a new DC state.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit e2fdd5c5257d ("drm/amd/display: Add left edge pixel for
YCbCr422/420 + ODM pipe split")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.
Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.
[HOW]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Previously the new minimal transition path was only used for windowed
MPO + ODM for plane scaling updates. However, we want to generalize the
transition for all cases whenever a non-seamless transition is detected
(such as for MPO -> SubVP + MPC).
To make this change we add pointers in the plane state, stream, and
pointers in the stream state to the dc_scratch state and backup and
restore these so the minimal transition can take place successfully.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why/How]
A regression was identified with the change to add left edge pixel for
YCbCr422/420 + ODM combine cases.
This reverts commit 288c0254a0b0c9980dba9df7d5afadf27280b99c
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.
Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.
[How]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
odm calculation is missing for pipe split policy determination
and cause Underflow/Corruption issue.
[how]
Add the odm calculation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
More information is desired for the test tools.
[How]
Refactored get_subvp_visual_confirm_color and
get_mclk_switch_visual_confirm_color to support the new method of
storing the p_state type, which was changed so that it could also be
saved and output by the DPM log. Ensured that the p_state type is kept
updated by looping through the pipes within commit_planes_for_stream.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY?]
Phantom streams and planes were previously not referenced explcitly on creation.
[HOW?]
To reduce memory management complexity, add an additional phantom streams and planes
reference into dc_state, and move mall_stream_config to stream_status inside
the state to make it safe to modify in shallow copies. Also consildates any logic
that is affected by this change to dc_state.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
in context
[why]
When ODM slice count is changed, otg master pipe's pixel clock params is
no longer valid as the value is dependent on ODM slice count.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Current DPG test pattern logic does not account for ODM configuration
changes after test pattern has already been programmed. For example, if
ODM2:1 is enabled after test pattern is already being output, the second
pipe is not programmed to output test pattern, causing half the screen
to be black.
[How]
Move DPG test pattern parameter calculations into separate function.
Whenever ODM pipe configuration changes, re-calculate DPG test pattern
parameters and program DPG if test pattern is currently enabled.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DC is transitioning from DML to DML2, and this commit introduces all the
required changes for some of the already available ASICs and adds the
required code infra to support new ASICs under DML2. DML2 is also a
generated code that provides better mode verification and programming
models for software/hardware, and it enables a better way to create
validation tools. This version is more like a middle step to the
complete transition to the DML2 version.
Changes since V1:
- Alex: Fix typos
Changes since V2:
- Update DC includes
Changes since V3:
- Fix 32 bit compilation issues on x86
Changes since V4:
- Avoid compilation of DML2 on some not supported 32-bit architecture
- Update commit message
Co-developed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
We do not have a programming sequence to support seamless transition
between MPC combine to ODM combine when plane count remains the same.
This can happen with windowed MPO ODM use cases when plane scaling
is changed over ODM Combine's capability.
[How]
We are adding a programming sequence specifically to handle the transition
between MPC combine and ODM combine during plane scaling change.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Add PG_CNTL handling for DCN35.
Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
release pipe
[why]
We need a new algorithm for acquiring secondary opp heads for ODM combine
in dcn32 and a release pipe interface to properly release pipe resources.
[how]
add two new interfaces in DCN specific resource file.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For DPIA we should have preferred DIG assignment based on DPIA selected
as per the ASIC design.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
SubVP needs to "calculate" the earliest in use META address
by using the current primary / meta addresses, but this leads
to a race condition where FW and driver can read/write the
address at the same time and intermittently produce inconsistent
address offsets. To mitigate this issue without locking (too slow),
save each surface flip addr into scratch registers and use this
to keep track of the earliest in use META addres.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
acquire_free_pipe_as_sec_dpp_pipe
[why]
Secondary DPP pipes are used for rendering secondary layers of planes.
The name "for layer" doesn't make it obvious. The function is acquiring
a free pipe as secondary dpp pipe only. We rename it so it is more obvious.
In a future follow up change, we want to add functions to acquire free pipe as
opp head pipe or otg master pipe as well. They will have their separate
allocation priority.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Preivous algorithm for finding an optimal idle pipe for a new plane was
implemented to handle dynamic pipe allocation when MPO plane moves
from one ODM slice to the other. Now pipe allocation is more static so
it no longer depends on the MPO plane's position. We are simplifying
our logic and remove unnecessary handling in our code.
[how]
Apply a new simplified version of pipe resource allocation logic to reduce
unnecessary flip delay caused by swapping secondary dpp pipe to other
MPC blending tree.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In some instances, the GPU is transmitting repeated frame to the sink
without any updates or changes in the content. These repeat transmission
are wasteful, resulting in power draw in different aspects of the system
1. DCN is fetching the frame of data from DF/UMC/DRAM. This memory traffic
prevents power down of parts of this HW path.
2. GPU is transmitting pixel data to the display through the main link of
the DisplayPort interface. This prevents power down of both the Source
transmitter (TX) and the Sink receiver (RX)
The concepts of utilizing replay is similar to PSR, but there is a benefit of:
Source and Sink remaining synchronized which allows for
- lower latency when switching from replay to live frames
- enable the possibility of more use cases
- easy control of the sink's refresh rate during replay
Due to Source and Sink remaining timing synchronized, Replay can be activated
in more UI scenarios.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
- Refactor HW sequencer to use a build / execute sequence
- Also move gamma updates to become fast
v2: squash in build fix ("drm/amd/display: Fix guarding of 'if (dc->debug.visual_confirm)'")
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
- Updates to unbounded requesting should not be conditional
on updates to dlg / ttu, as this could prevent unbounded
requesting from being updated if dlg / ttu does not change
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why && How]
We would like to have visual confirm color support for MCLK switch.
1. Set visual confirm color to yellow: Vblank MCLK switch.
2. Set visual confirm color to cyan: FPO + Vblank MCLK
switch.
3. Set visual confirm color to pink: Vactive MCLK switch.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
There is no reason we still need a config option for this.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
dc_link contains over 30k line of code, the decision is to break it
down to files residing in link folder based on functionality. This
change is the last break down change which will remove dc_link.c
file after everything is broken down.
[how]
Move remaining dc_link.c functions into link_detection, link_dpms,
link_validation, link_resource, and link_fpga and remove dc_link.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MALL SS and Subvp use the same calculations for determining the size of
the required allocation for a given surface, which is already done in
DML. Add an interface to extract this information from VBA variables and
use in their respective helper functions. Also refactor existing code to
remove stale workarounds.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
By moving bw_ctx field to the end of the dc_state the state can be
cleared more efficiently without resulting in large DML memcpy
operations, resulting in better mode enumeration performance on some
platforms.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
- When entering into a SubVP config that requires a minimal
transition we need to retain phantom pipes and also restore
the mall config
- This is because the min transition will remove phantom pipes
from the context (shallow copy) and not restore it's original
state
- This is just a workaround, and needs a proper fix
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
- This is a workaround to avoid concurrency issues -- a fast update
creates a shallow copy of the dc current_state, and removes all
subvp/phantom related flags.
- We want to prevent the fast update thread from removing those
flags in case there's another thread running that requires
the info for proper programming
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
- If we fail validation, we should retain the phantom
stream/planes
- Full updates assume that phantom pipes will be fully
removed, but if validation fails we keep the phantom
pipes
- Therefore we have to retain the plane/stream if validation
fails (since the refcount is decremented before validation,
and the expectation is that it's fully freed when the old
dc_state is released)
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add basic kernel-doc that describes some of the struct and functions
that are part of the DC commit sequence..
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add kernel-doc to some important elements from DC struct that might help
to understand DC sequence.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit adds extra documentation for elements related to FAMs.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Add a helper to map ODM/MPC/Multi-Plane resources from DC
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
At some point, we decided to blank HUBP during pixel data blank, and to
handle that, we added some OPTC lock checks. Later, we realized that
this change caused multiple regression, and we removed it. Nevertheless,
we still have some leftovers that might affect some ASIC behavior, and
this commit drops those changes to keep the code consistent.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We split out ILR config from "global" to "per-panel" config settings.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
Preparation to enable run time initialization of register offsets to add
dc_context to the link_enc_create callback. This is needed to get the
dc_ctx handle where register offset initialization routine is called.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
2:1 combine
[Why]
With single display odm 2:1 policy, when moving windowed MPO across
the display, we experience a momentary lag when we move between the
centre of the display and the right half of the display. This is
caused by the MPO pipe being reallocated when it crosses this
boundary
[How]
Handle two cases:
1. if the head pipe has a MPO pipe already allocated in the old
context, then use that pipe if it is available in the current
context
2. if the head pipe is on the left side, check the right side to
see if it has a MPO pipe already allocated. If so, don't use
that pipe if it is selected as the idle pipe in the current
context
Add new function pointer called .acquire_idle_pipe_for_head_pipe
that will pass in the head pipe and handle case 1
Add find_idle_secondary_pipe_check_mpo() to handle case 2
if we don't hit case 1.
In dc_add_plane_to_context(), start with head pipe and check
case 1 and 2 in call acquire_free_pipe_for_head().
If we are on the right side of the display, check case 1
again by passing in right side pipe as the new head in
call acquire_free_pipe_for_head().
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Ideally link capability should be independent from the link
configuration that we decide to use in enable link. Otherwise if link
capability is changed after validation has completed, we could end up
enabling a link configuration with invalid configuration. This would
lead to over link bandwidth subscription or in the extreme case
causes us to enable HPO link to a DIO stream.
[how]
Add a new struct in pipe ctx called link config. This structure will
contain link configuration to enable a link. It will be populated
during map pool resources after we validate link bandwidth. Remove
the reference of verified link cap during enable link process and
use link config in pipe ctx instead.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit enables the SubVP feature. To achieve that, we need to:
- Don't force p-state disallow on SubVP (can't block dummy p-state)
- Send calculated watermark to DMCUB for SubVP
- Adjust CAB mode message to PMFW
- Add a proper locking sequence for SubVP
- Various fixes to SubVP static analysis and determining SubVP config
- Currently SubVP not supported with pipe split so merge all pipes
before setting up SubVp
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
This patch adds necessary changes needed in DC files outside DCN32/321
specific tree
v2: squash in updates (Alex)
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
As part of the FPU isolation work documented in
https://patchwork.freedesktop.org/series/93042/, isolate
code that uses FPU in DCN30 to DML, where all FPU code
should locate.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jasdeep Dhillon <jdhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
CONFIG_DRM_AMD_DC_DCN is used by pass the compilation failures, but DC
code should be OS-agnostic.
This patch fixes it by removing unnecessasry CONFIG_DRM_AMD_DC_DCN
in dc and dc/core directories.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Move link_hwss to its own folder as part of DC LIB and break it down
to separate file one for each type of backend for code isolation.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
DCN guard is not necessary for DP2.x relevant logic.
Drop them.
v2: squash in fix for misplaced #endif (Alex)
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|