summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dmub
AgeCommit message (Collapse)AuthorFilesLines
2024-03-20drm/amd/display: Amend coasting vtotal for replay low hzChunTao Tso1-0/+8
[WHY] The original coasting vtotal is 2 bytes, and it need to be amended to 4 bytes because low hz case. [HOW] Amend coasting vtotal from 2 bytes to 4 bytes. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd/display: add DMUB source files and changes for DCN351Hamza Mahfooz4-0/+52
DMUB support is required to light-up displays. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd/display: add DCN351 version identifiersHamza Mahfooz1-0/+1
Add DCN3.5.1 ASIC identifiers. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amd/display: Fix S4 hang polling on HW power up done for VBIOS DMCUBNicholas Kazlauskas2-9/+8
[Why] VBIOS DMCUB firmware doesn't set the dal_fw bit and we end up hanging waiting for HW power up done because of it. [How] Simplify the path and allow mailbox_rdy to be a functional check when we detect VBIOS firmware. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-15drm/amd/display: Add shared firmware state for DMUB IPS handshakeNicholas Kazlauskas13-13/+165
[Why] Read modify write hazards can occur when using a single shared scratch register between driver and firmware leading to driver accessing DCN in IPS2 and a system hang. [How] Add infrastructure for using REGION6 as a shared firmware state between driver and firmware. This region is uncachable. Replace the existing get/set idle calls with reads/writes to the (volatile) shared firmware state blocks that a separated by at least a cache line between firmware and driver. Remove the workarounds that required rewriting/checking read modify write hazards. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Drop legacy codeRodrigo Siqueira3-14/+0
Display code keeps getting improvements, and because of that, some legacy code is left behind. This commit drops some of those unused codes. Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: [FW Promotion] Release 0.0.202.0Anthony Koo1-1/+7
- Add control flag for IPS residency profiling Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: refine code for dmcub inbox1 ring buffer debugFudongwang2-9/+5
[Why] 1. To watch dmcub inbox1 ring buffer cmd type without tools 2. dmub_cmd_PLAT_54186_wa 66 bytes [How] Added dmcub cmd type enum: unsigned char for debug use only, also fixed 66 bytes issue by using unsigned int in bit define instead of unsigned char. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Fudongwang <fudong.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: Wait for mailbox ready when powering up DMCUBNicholas Kazlauskas1-2/+11
[Why] Otherwise we can send commands too early and they don't execute until the next command is sent. [How] Check the extra status bit when polling for HW powered up. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-23drm/amd/display: [FW Promotion] Release 0.0.201.0Anthony Koo1-9/+4
- Add debug flag for Replay IPS visual confirm - Remove unused debug flags that should not be controlled inside Replay FSM Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-23drm/amd/display: Replay + IPS + ABM in Full Screen VPBChunTao Tso1-0/+46
[Why] Because ABM will wait VStart to start getting histogram data, it will cause we can't enter IPS while full screnn video playing. [How] Modify the panel refresh rate to the maximun multiple of current refresh rate. Reviewed-by: Dennis Chan <dennis.chan@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-23drm/amd/display: Add GART memory support for dmcubFudongwang2-66/+59
[Why] In dump file, GART memory can be accessed while frame buffer cannot. [How] Add GART memory support for dmcub. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Fudongwang <fudong.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-16drm/amd/display: Add Replay IPS register for DMUB command tableAlvin Lee1-0/+1
- Introduce a new Replay mode for DMUB version 0.0.199.0 Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: [FW Promotion] Release 0.0.197.0Anthony Koo1-1/+1
- Remove unused dmub_fw_boot_options flag Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: skip error logging when DMUB is inactive from S3Samson Tam2-2/+3
[Why] On resume from S3, while DMUB is inactive, DMUB queue and execute calls will not work. Skip reporting errors in these scenarios [How] Add new return code during DMUB queue and execute calls when DMUB is in S3 state. Skip logging errors in these scenarios Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-15drm/amd/display: do not send commands to DMUB if DMUB is inactive from S3Samson Tam2-0/+36
[Why] On resume from S3, may get apply_idle_optimizations call while DMUB is inactive which will just time out. [How] Set and track power state in dmub_srv and check power state before sending commands to DMUB. Add interface in both dmub_srv and dc_dmub_srv Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-06drm/amd/display: Increase scratch buffer sizeJosip Pavic1-1/+1
[Why] Larger data blocks are expected to be transferred between driver and FW in the future. [How] Embiggen the scratch buffer to a cromulent size. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Josip Pavic <josip.pavic@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-06drm/amd/display: Pass pwrseq inst for backlight and ABMLewis Huang1-2/+12
[Why] OTG inst and pwrseq inst mapping is not align therefore we cannot use otg_inst as pwrseq inst to get DCIO register. [How] 1. Pass the correct pwrseq instance to dmub when set abm pipe. 2. LVTMA control index change from panel_inst to pwrseq_inst. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Phil Hsieh <phil.hsieh@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Lewis Huang <lewis.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/amd/display: [FW Promotion] Release 0.0.194.0Anthony Koo1-0/+4
- Add a new dmub command in enum dmub_cmd_cab_type Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/amd/display: [FW Promotion] Release 0.0.193.0Anthony Koo1-2/+8
- Add a tracing framework, to measure duration, execution count and longest duration of main loop/vsync interrupt work GPINT command is used to start/stop the measurements. Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/amd/display: Disable Timing sync check in Full-Screen Video CaseDennis Chan1-5/+4
[why] If Panel max link off frame count is low, it will cause low residency for Replay, then Disabled timing sync check in Full screen Video Case. Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Dennis Chan <dennis.chan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/amd/display: replay: Augment Frameupdate CommandMax Tseng1-0/+51
[Why] Sending certain Frameupdate number for Replay Power Evaluation Reviewed-by: Dennis Chan <dennis.chan@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/amd/display: replay: generalize the send command function usageMax Tseng1-0/+10
Augment the function to allow send different format data in different use case. Reviewed-by: Dennis Chan <dennis.chan@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/amd/display: Include udelay when waiting for INBOX0 ACKAlvin Lee1-0/+1
When waiting for the ACK for INBOX0 message, we have to ensure to include the udelay for proper wait time Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amd/display: Add new command to disable replay timing resyncAnthony Koo1-0/+41
[WHY & HOW] Add new command to disable replay timing resync Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amd/display: add a debugfs interface for the DMUB trace maskHamza Mahfooz1-2/+38
For features that are implemented primarily in DMUB (e.g. PSR), it is useful to be able to trace them at a DMUB level from the kernel, especially when debugging issues. So, introduce a debugfs interface that is able to read and set the DMUB trace mask dynamically at runtime and document how to use it. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amd/display: Change the DMCUB mailbox memory location from FB to inboxLewis Huang2-16/+38
[WHY] Flush command sent to DMCUB spends more time for execution on a dGPU than on an APU. This causes cursor lag when using high refresh rate mouses. [HOW] 1. Change the DMCUB mailbox memory location from FB to inbox. 2. Only change windows memory to inbox. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Lewis Huang <lewis.huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amd/display: Guard against invalid RPTR/WPTR being setNicholas Kazlauskas1-3/+15
[WHY] HW can return invalid values on register read, guard against these being set and causing us to access memory out of range and page fault. [HOW] Guard at sync_inbox1 and guard at pushing commands. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-07drm/amd/display: [FW Promotion] Release 0.0.190.0Anthony Koo1-2/+2
- Increase number of bits for IPS boot option Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-07drm/amd/display: Enable more IPS optionsSung Joon Kim1-3/+6
[why] To help isolate static screen and video playback tests, we want to enable an IPS option to allow IPS only on D3 cycle. [how] Add DISABLE_DYNAMIC and DISABLE_ALL IPS disable flags for user control. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Sung Joon Kim <sungkim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-07drm/amd/display: [FW Promotion] Release 0.0.189.0Anthony Koo1-7/+5
- Minor formatting changes - Update defines to match the bit width of the field it is used for - Add new boot up bits to control HW sub block regions power down Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-27drm/amd/display: Add a check for idle power optimizationSung Joon Kim1-0/+1
[why] Need a helper function to check idle power is allowed so that dc doesn't access any registers that are power-gated. [how] Implement helper function to check idle power optimization. Enable a hook to check if detection is allowed. V2: Add function hooks for set and get idle states. Check if function hook was properly initialized. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Nicholas Choi <nicholas.choi@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Sung Joon Kim <sungkim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-27drm/amd/display: Add missing copyright notice in DMUBStylon Wang2-0/+38
[Why & How] Add missing/incomplete copyright notice in DMUB files Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-10drm/amd/display: Refactor HWSS into component folderMounika Adhuri1-1/+2
[why] Rename hw_sequencer to hwseq. Move all hwseq files to unique folder hwss. [how] creating hwss repo in dc, and moved the dcnxx_hwseq.c and .h files into corresponding new folders inside the hwss and cleared the linkage errors by adding relative paths in the Makefile.template. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-09drm/amd/display: Revert "drm/amd/display: Add a check for idle power ↵Sung Joon Kim1-1/+0
optimization" Revert commit 434cf7af492f ("drm/amd/display: Add a check for idle power optimization") Because it cause Freesync and S4 regression Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Sung Joon Kim <sungkim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-05drm/amd/display: Adjust code style for dmub_cmd.hAurabindo Pillai1-81/+81
[Why&How] Make some formatting changes and rearranging of definitions for consistency. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-05drm/amd/display: Update DMUB cmd headerAurabindo Pillai1-3/+28
[Why&How] * Add hints about the bits used in the packed struct. * Update new bitfields for ABM and IPS Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-05drm/amd/display: Add a check for idle power optimizationSung Joon Kim1-0/+1
[why] Need a helper function to check idle power is allowed so that dc doesn't access any registers that are power-gated. [how] Implement helper function to check idle power optimization. Enable a hook to check if detection is allowed. Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-20drm/amd/display: [FW Promotion] Release 0.0.183.0Anthony Koo1-0/+31
- Add new IPS ALLOW masks - Add new Replay power configuration options Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-12drm/amd/display: support main link off before specific vertical linePaul Hsieh1-2/+2
[Why] Some panels request main link off before specific vertical line. If source turn off main link after specific vertical line then panel defect will be exposed. [How] Add interface to support turn off main link before specific vertical line Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-12drm/amd/display: [FW Promotion] Release 0.0.181.0Anthony Koo1-0/+2
- Add new params to dmub_feature_caps for checking replay support in FW Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-06drm/amd/display: clean up one inconsistent indentingYang Li1-1/+1
drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_srv.c:355 dmub_srv_hw_setup() warn: inconsistent indenting Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Add DCN35 DMUBQingqing Zhuo5-1/+933
[Why & How] Add DMUB handling for DCN35. Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Skip dmub memory flush when not neededDillon Varone2-1/+10
[WHY&HOW] Readback is only necessary when loaded via CPU. Reviewed-by: Chris Park <chris.park@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: [FW Promotion] Release 0.0.180.0Anthony Koo1-5/+0
- Remove unused flag otg_powered_down Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Write flip addr to scratch reg for subvpAlvin Lee4-0/+64
[Description] SubVP needs to "calculate" the earliest in use META address by using the current primary / meta addresses, but this leads to a race condition where FW and driver can read/write the address at the same time and intermittently produce inconsistent address offsets. To mitigate this issue without locking (too slow), save each surface flip addr into scratch registers and use this to keep track of the earliest in use META addres. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Enable runtime register offset init for DCN32 DMUBAurabindo Pillai4-20/+31
[Why&How] DMUB subsystem was continuing to use compile time offset calculation for register access. Switch this to runtime calculation to stay consistent with rest of DC code. To enable this, an additional interface init_reg_offsets() are added to DMUB's hw_funcs struct. Asics with runtime register offset calculation enabled shall populate this hook with a fn pointer that will invoke the necessary macros to calculate the offset. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-16drm/amd/display: [FW Promotion] Release 0.0.179.0Anthony Koo1-0/+4
- Add defines to specify new PHY power states Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-08drm/amd/display: Add interface to enable DPIA traceStylon Wang1-0/+18
[Why] DPIA traces from DMUB is not enabled by default, which is less convenient to debug DPIA related issues because we have to resort to other debug tools to enable DPIA trace. [How] Exposes interfaces to update trace mask from the DMUB GPINT commands. Also provides DC implementations to enable DPIA trace. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-08drm/amd/display: Add structs for Freesync Panel ReplayBhawanpreet Lakha1-0/+412
In some instances, the GPU is transmitting repeated frame to the sink without any updates or changes in the content. These repeat transmission are wasteful, resulting in power draw in different aspects of the system 1. DCN is fetching the frame of data from DF/UMC/DRAM. This memory traffic prevents power down of parts of this HW path. 2. GPU is transmitting pixel data to the display through the main link of the DisplayPort interface. This prevents power down of both the Source transmitter (TX) and the Sink receiver (RX)  The concepts of utilizing replay is similar to PSR, but there is a benefit of: Source and Sink remaining synchronized which allows for - lower latency when switching from replay to live frames - enable the possibility of more use cases - easy control of the sink's refresh rate during replay Due to Source and Sink remaining timing synchronized, Replay can be activated in more UI scenarios. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-09 03:29:32 +0300