summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
AgeCommit message (Collapse)AuthorFilesLines
2022-08-03drm/gem: rename struct drm_gem_dma_object.{paddr => dma_addr}Danilo Krummrich1-1/+1
The field paddr of struct drm_gem_dma_object holds a DMA address, which might actually be a physical address. However, depending on the platform, it can also be a bus address or a virtual address managed by an IOMMU. Hence, rename the field to dma_addr, which is more applicable. In order to do this renaming the following coccinelle script was used: ``` @@ struct drm_gem_dma_object *gem; @@ - gem->paddr + gem->dma_addr @@ struct drm_gem_dma_object gem; @@ - gem.paddr + gem.dma_addr @exists@ typedef dma_addr_t; symbol paddr; @@ dma_addr_t paddr; <... - paddr + dma_addr ...> @@ symbol paddr; @@ dma_addr_t - paddr + dma_addr ; ``` This patch is compile-time tested with: ``` make ARCH={x86_64,arm,arm64} allyesconfig make ARCH={x86_64,arm,arm64} drivers/gpu/drm` ``` Acked-by: Sam Ravnborg <sam@ravnborg.org> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-5-dakr@redhat.com
2022-08-03drm/gem: rename GEM CMA helpers to GEM DMA helpersDanilo Krummrich1-2/+2
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-03drm/fb: rename FB CMA helpers to FB DMA helpersDanilo Krummrich1-2/+2
Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "FB CMA", but not "GEM CMA". This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
2022-07-26drm: Remove unnecessary include statements of drm_plane_helper.hThomas Zimmermann1-1/+0
Remove the include statement for drm_plane_helper.h from all the files that don't need it. Althogh the header file is almost empty, many drivers include it somewhere. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de
2022-06-20drm: Drop drm_blend.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for drm_blend.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_blend.h. Quite a few placs do currently depend on drm_blend.h without actually including it directly. All of those need to be fixed up. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-4-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-20drm: Drop drm_framebuffer.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for drm_frambuffer.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_framebuffer.h. Quite a few placs do currently depend on drm_framebuffer.h without actually including it directly. All of those need to be fixed up. v2: Fix up msm some more v2: Deal with ingenic and shmobile as well Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2021-02-25drm: Use state helper instead of the plane state pointerMaxime Ripard1-1/+2
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_update or atomic_disable hooks, which would be the new plane state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ adds_new_state @ identifier plane_atomic_func.func; identifier plane, state; identifier new_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *new_state = plane->state; + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane); ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard1-3/+3
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm: Store new plane state in a variable for atomic_update and disableMaxime Ripard1-2/+3
In order to store the new plane state in a subsequent helper, let's move the plane->state dereferences into a variable. This was done using the following coccinelle script, plus some hand changes for vmwgfx: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ has_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { + struct drm_plane_state *new_state = plane->state; <+... - plane->state + new_state ...+> } @ has_new_state_state @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { + struct drm_plane_state *new_plane_state = plane->state; <+... - plane->state + new_plane_state ...+> } @ has_new_state_old_s @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol old_s; @@ func(struct drm_plane *plane, struct drm_plane_state *old_s) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_old_s @ identifier plane_atomic_func.func; identifier plane; symbol old_s; @@ func(struct drm_plane *plane, struct drm_plane_state *old_s) { + struct drm_plane_state *new_s = plane->state; <+... - plane->state + new_s ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-24drm: Use the state pointer directly in planes atomic_checkMaxime Ripard1-1/+1
Now that atomic_check takes the global atomic state as a parameter, we don't need to go through the pointer in the plane state. This was done using the following coccinelle script: @ plane_atomic_func @ identifier helpers; identifier func; @@ static struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... when != plane_state - plane_state->state + state ...> } @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... - plane_state->state + state ...> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-5-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes atomic_checkMaxime Ripard1-1/+2
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_check. The conversion was done using the coccinelle script below plus some manual changes for vmwgfx, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_check(plane, plane_state) + FUNCS->atomic_check(plane, state) ...+> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *new_plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24drm/atmel-hlcdc: Rename custom plane state variableMaxime Ripard1-59/+59
Subsequent reworks will pass the global atomic state in the function prototype, and atomic_check and atomic_update already have such a variable already. Let's change them to ease the rework. Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-3-maxime@cerno.tech
2020-11-12drm/atmel-hlcdc/atmel_hlcdc_plane: Fix documentation formatting and add ↵Lee Jones1-1/+2
missing description Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:283:6: warning: no previous prototype for ‘atmel_hlcdc_plane_setup_scaler’ [-Wmissing-prototypes] drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:44: warning: cannot understand function prototype: 'struct atmel_hlcdc_plane_state ' Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-18-lee.jones@linaro.org
2020-11-12drm/atmel-hlcdc/atmel_hlcdc_plane: Staticise local function ↵Lee Jones1-2/+2
'atmel_hlcdc_plane_setup_scaler()' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:283:6: warning: no previous prototype for ‘atmel_hlcdc_plane_setup_scaler’ [-Wmissing-prototypes] Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-17-lee.jones@linaro.org
2019-12-13drm/atmel: plane_state->fb iff plane_state->crtcDaniel Vetter1-1/+1
Checking both is one too much, so wrap a WARN_ON around it to stope the copypasta. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-3-daniel.vetter@ffwll.ch
2019-10-11drm/atmel-hlcdc: Use swap() where appropriateVille Syrjälä1-4/+1
@swap@ identifier TEMP; expression A,B; @@ - TEMP = A; - A = B; - B = TEMP; + swap(A, B); @@ type T; identifier swap.TEMP; @@ ( - T TEMP; | - T TEMP = {...}; ) ... when != TEMP Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191010131159.17346-3-ville.syrjala@linux.intel.com Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-07-22Merge v5.3-rc1 into drm-misc-nextMaxime Ripard1-12/+1
Noralf needs some SPI patches in 5.3 to merge some work on tinydrm. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-16Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-8/+3
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
2019-07-15drm/atmel_hlcdc: drop use of drmP.hSam Ravnborg1-0/+10
Drop use of the deprecated header drmP.h. Make header file self-contained, with only the required set of include files. And fixed fallout in remaining files. Divide include files in blocks and sort them within each block. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Emil Velikov <emil.velikov@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-15-sam@ravnborg.org
2019-07-12drm/atmel-hlcdc: set layer REP bit to enable replication logicJoshua.Henderson@microchip.com1-1/+1
This bit enables replication logic to expand an RGB color less than 24 bits, to 24 bits, which is used internally for all formats. Otherwise, the least significant bits are always set to zero and the color may not be what is expected. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1562686509-8747-1-git-send-email-joshua.henderson@microchip.com
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05drm/atmel-hlcdc: revert shift by 8Claudiu Beznea1-1/+1
Revert shift by 8 of state->base.alpha. This introduced a regression on planes. Fixes: 7f73c10b256b ("drm/atmel-hclcdc: Convert to the new generic alpha property") Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1556195748-11106-7-git-send-email-claudiu.beznea@microchip.com
2019-05-20drm: Remove users of drm_format_(horz|vert)_chroma_subsamplingMaxime Ripard1-7/+2
drm_format_horz_chroma_subsampling and drm_format_vert_chroma_subsampling are basically a lookup in the drm_format_info table plus an access to the hsub and vsub fields of the appropriate entry. Most drivers are using this function while having access to the entry already, which means that we will perform an unnecessary lookup. Removing the call to these functions is therefore more efficient. Some drivers will not have access to that entry in the function, but in this case the overhead is minimal (we just have to call drm_format_info() to perform the lookup) and we can even avoid multiple, inefficient lookups in some places that need multiple fields from the drm_format_info structure. This is amplified by the fact that most of the time the callers will have to retrieve both the vsub and hsub fields, meaning that they would perform twice the lookup. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/6b3cceb8161e2c1d40c2681de99202328b0a8abc.1558002671.git-series.maxime.ripard@bootlin.com
2019-01-27drm/atmel-hlcdc: fix clipping of planesPeter Rosin1-101/+61
With the help from drm_atomic_helper_check_plane_state function, clipping now handles planes to be partially or totally off-screen. The plane is disabled if it is not visible. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190110151020.30468-4-peda@axentia.se
2019-01-27drm/atmel-hlcdc: do not swap w/h of the crtc when a plane is rotatedPeter Rosin1-3/+0
The destination crtc rectangle is independent of source plane rotation. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190110151020.30468-3-peda@axentia.se
2019-01-27drm/atmel-hlcdc: rotate planes counterclockwisePeter Rosin1-15/+15
Ouch, the driver rotates planes clockwise, which is simply not correct. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190110151020.30468-2-peda@axentia.se
2018-08-06drm: atmel-hlcdc: Use __drm_atomic_helper_plane_reset instead of copying the ↵Alexandru Gheorghe1-4/+1
logic A new helper function(__drm_atomic_helper_plane_reset) has been added for linking a plane with its state and resetting the core properties(alpha, rotation, etc.) to their default values. Use that instead of duplicating the logic. __drm_atomic_helper_plane_reset initializes the alpha property to its max value, which is defined by the drm core as DRM_BLEND_ALPHA_OPAQUE, so nothing changes regarding the alpha value. Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-5-alexandru-cosmin.gheorghe@arm.com
2018-06-29Merge tag 'ib-fbdev-drm-v4.19-deferred-console-takeover' of ↵Gustavo Padovan1-1/+1
https://github.com/bzolnier/linux into drm-misc-next Immutable branch between fbdev and drm for the v4.19 merge window (contains the deferred console takeover feature) Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> # gpg: Signature made Thu 28 Jun 2018 10:24:50 AM -03 # gpg: using RSA key 7E33B63FA047C20B # gpg: Can't check signature: public key not found # Conflicts: # drivers/gpu/drm/i915/i915_gem.c # drivers/gpu/drm/i915/intel_crt.c # drivers/gpu/drm/i915/intel_display.c # drivers/gpu/drm/i915/intel_lrc.c Link: https://patchwork.freedesktop.org/patch/msgid/2462549.rLSfW9kX99@amdc3058
2018-06-22Merge tag 'drm-misc-fixes-2018-06-21' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v4.18-rc2: - A reversion of a commit in drm/sun4i to fix a run-time fault. - Various fixes to the sii8620 bridge. - Small bugfix to correctly check stride in atmel-hlcdc. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/787d4bef-a579-4046-d0fc-f8c2c5b80c25@linux.intel.com
2018-06-17drm/atmel-hlcdc: check stride values in the first planeStefan Agner1-1/+1
The statement always evaluates to true since the struct fields are arrays. This has shown up as a warning when compiling with clang: warning: address of array 'desc->layout.xstride' will always evaluate to 'true' [-Wpointer-bool-conversion] Check for values in the first plane instead. Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support") Cc: <stable@vger.kernel.org> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180617084826.31885-1-stefan@agner.ch
2018-05-25drm/atmel-hlcdc: Stop using plane->fbVille Syrjälä1-11/+1
We want to get rid of plane->fb on atomic drivers. Stop looking at it. Daniel pointed out that the drm_framebuffer_put() in the plane cleanup indicates that the driver doesn't shut things down cleanly. To do that we should be able to just call drm_atomic_helper_shutdown(). Not really sure the current cleanup sequence is actually sane, but whatever. v2: Replace the drm_framebuffer_put() with drm_atomic_helper_shutdown() (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405151400.11326-10-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-05-25drm/atmel-hlcdc: Stop consulting plane->crtcVille Syrjälä1-3/+4
We want to get rid of plane->crtc on atomic drivers. Stop looking at it. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405151400.11326-3-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-04-16drm/atmel-hclcdc: Convert to the new generic alpha propertyMaxime Ripard1-75/+14
Now that we have support for per-plane alpha in the core, let's use it. Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/e5e97e2aae129600233e0983b748e4ba51ced239.1523432341.git-series.maxime.ripard@bootlin.com
2018-01-29drm/atmel-hlcdc: Use the alpha format field in drm_format_infoMaxime Ripard1-19/+5
Now that the drm_format_info has a alpha field to tell if a format embeds an alpha component in it, let's use it. Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/23518426a46320dd884465cebec0961f839f2972.1516617243.git-series.maxime.ripard@free-electrons.com
2017-08-08drm: Nuke drm_atomic_helper_plane_set_propertyDaniel Vetter1-1/+0
It's dead code, the core handles all this directly now. This also allows us to unexport drm_atomic_plane_set_property. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Eric Engestrom <eric@engestrom.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rob Clark <robdclark@gmail.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-6-daniel.vetter@ffwll.ch Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-08-03drm/atmel-hlcdc: switch to drm_*{get,put} helpersCihangir Akturk1-4/+4
drm_*_reference() and drm_*_unreference() functions are just compatibility alias for drm_*_get() and drm_*_put() and should not be used by new code. So convert all users of compatibility functions to use the new APIs. Signed-off-by: Cihangir Akturk <cakturk@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/1501761585-11757-6-git-send-email-cakturk@gmail.com
2017-08-03drm/atmel-hlcdc : constify drm_plane_helper_funcs and drm_plane_funcs.Arvind Yadav1-2/+2
drm_plane_helper_funcs and drm_plane_funcsare not supposed to change at runtime. All functions working with drm_plane_helper_funcs and drm_plane_funcs work with const. So mark the non-const structs as const. File size before: text data bss dec hex filename 6072 596 0 6668 1a0c atmel_hlcdc_plane.o File size After adding 'const': text data bss dec hex filename 6218 436 0 6654 19fe atmel_hlcdc_plane.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/646415a3b2e62182f85254115e8491e5caf4b2c7.1499098826.git.arvind.yadav.cs@gmail.com
2017-08-01drm: Plumb modifiers through plane initBen Widawsky1-1/+2
This is the plumbing for supporting fb modifiers on planes. Modifiers have already been introduced to some extent, but this series will extend this to allow querying modifiers per plane. Based on this, the client to enable optimal modifications for framebuffers. This patch simply allows the DRM drivers to initialize their list of supported modifiers upon initializing the plane. v2: A minor addition from Daniel v3: * Updated commit message * s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu) * Remove some excess newlines (Liviu) * Update comment for > 64 modifiers (Liviu) v4: Minor comment adjustments (Liviu) v5: Some new platforms added due to rebase v6: Add some missed plane inits (or maybe they're new - who knows at this point) (Daniel) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Daniel Stone <daniels@collabora.com> (v2) Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Stone <daniels@collabora.com>
2017-06-22drm: atmel-hlcdc: add support for 8-bit color lookup table modePeter Rosin1-0/+29
All layers of all supported chips support this, the only variable is the base address of the lookup table in the register map. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1498107791-17450-3-git-send-email-peda@axentia.se
2017-05-22drm: Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ to UAPIRobert Foss1-10/+10
Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI as a convenience. Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up through the atomic API, but realizing that userspace is likely to take shortcuts and assume that the enum values are what is sent over the wire. As a result these defines are provided purely as a convenience to userspace applications. Changes since v3: - Switched away from past tense in comments - Add define name change to previously mis-spelled DRM_REFLECT_X comment - Improved the comment for the DRM_MODE_REFLECT_<axis> comment Changes since v2: - Changed define prefix from DRM_MODE_PROP_ to DRM_MODE_ - Fix compilation errors - Changed comment formatting - Deduplicated comment lines - Clarified DRM_MODE_PROP_REFLECT_ comment Changes since v1: - Moved defines from drm.h to drm_mode.h - Changed define prefix from DRM_ to DRM_MODE_PROP_ - Updated uses of the defines to the new prefix - Removed include from drm_rect.c - Stopped using the BIT() macro Signed-off-by: Robert Foss <robert.foss@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170519205017.23307-2-robert.foss@collabora.com
2017-02-28drm/atmel-hlcdc: Simplify the HLCDC layer logicBoris Brezillon1-332/+313
An HLCDC layers in Atmel's nomenclature is either a DRM plane or a 'Post Processing Layer' which can be used to output the results of the HLCDC composition in a memory buffer. atmel_hlcdc_layer.c was designed to be generic enough to be re-usable in both cases, but we're not exposing the post-processing layer yet, and even if we were, I'm not sure the code would provide the necessary tools to manipulate this kind of layer. Moreover, the code in atmel_hlcdc_{plane,layer}.c was designed before the atomic modesetting API, and was trying solve the check-setting/commit-if-ok/rollback-otherwise problem, which is now entirely solved by the existing core infrastructure. And finally, the code in atmel_hlcdc_layer.c is over-complicated compared to what we really need. This rework is a good excuse to simplify it. Note that this rework solves an existing resource leak (leading to a -EBUSY error) which I failed to clearly identify. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Eric Anholt <eric@anholt.net> Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-02-26drm: Always prepare null framebuffer in transitional helperGabriel Krisman Bertazi1-0/+3
Despite the documentation claim that cleanup_fb will match prior calls to prepare_fb, in case of NULL framebuffers in the transitional helpers, the code will skip the call to prepare_fb but not the corresponding cleanup_fb call. This asymmetry in semantics is unnecessarily surprising for developers transitioning drivers to atomic model, specially because the final atomic handlers don't have the issue - the prepare_fb is always called, despite the new state framebuffer being null. The only current user of the transitional helper that doesn't take care of null framebuffers explicitly inside the prepare_fb hook is atmel_hlcdc, so we take special care to make sure we don't break anything there. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170216164442.28704-1-krisman@collabora.co.uk
2016-12-15drm: Nuke fb->pixel_formatVille Syrjälä1-9/+9
Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15drm: Replace drm_format_plane_cpp() with fb->format->cpp[]Ville Syrjälä1-1/+1
Replace drm_format_plane_cpp(fb->pixel_format) with just fb->format->cpp[]. Avoids the expensive format info lookup. @@ struct drm_framebuffer *a; struct drm_framebuffer b; expression E; @@ ( - drm_format_plane_cpp(a->pixel_format, E) + a->format->cpp[E] | - drm_format_plane_cpp(b.pixel_format, E) + b.format->cpp[E] ) @@ struct drm_plane_state *a; struct drm_plane_state b; expression E; @@ ( - drm_format_plane_cpp(a->fb->pixel_format, E) + a->fb->format->cpp[E] | - drm_format_plane_cpp(b.fb->pixel_format, E) + b.fb->format->cpp[E] ) @@ struct drm_framebuffer *a; identifier T; expression E; @@ T = a->pixel_format <+... - drm_format_plane_cpp(T, E) + a->format->cpp[E] ...+> @@ struct drm_framebuffer b; identifier T; expression E; @@ T = b.pixel_format <+... - drm_format_plane_cpp(T, E) + b.format->cpp[E] ...+> v2: Rerun spatch due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751057-18123-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15drm: Replace drm_format_num_planes() with fb->format->num_planesVille Syrjälä1-1/+1
Replace drm_format_num_planes(fb->pixel_format) with just fb->format->num_planes. Avoids the expensive format info lookup. @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - drm_format_num_planes(a->pixel_format) + a->format->num_planes | - drm_format_num_planes(b.pixel_format) + b.format->num_planes ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - drm_format_num_planes(a->fb->pixel_format) + a->fb->format->num_planes | - drm_format_num_planes(b.fb->pixel_format) + b.fb->format->num_planes ) @@ struct drm_framebuffer *a; identifier T; @@ T = a->pixel_format <+... - drm_format_num_planes(T) + a->format->num_planes ...+> @@ struct drm_framebuffer b; identifier T; @@ T = b.pixel_format <+... - drm_format_num_planes(T) + b.format->num_planes ...+> v2: Rerun spatch due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751022-18015-1-git-send-email-ville.syrjala@linux.intel.com
2016-10-21drm/atmel-hlcdc: Use per-plane rotation propertyVille Syrjälä1-17/+20
The global mode_config.rotation_property is going away, switch over to per-plane rotation_property. v2: Propagate error upwards (Boris) v3: Drop the BIT() Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-6-git-send-email-ville.syrjala@linux.intel.com
2016-10-21drm: Add drm_rotation_90_or_270()Ville Syrjälä1-2/+2
We have intel_rotation_90_or_270() in i915 to check if the rotation is 90 or 270 degrees. Similar checks are elsewhere in drm, so let's move the helper into a central place and use it everwhere. v2: Drop the BIT() Convert all new intel_rotation_90_or_270() calls Deal with superfluous code shuffling Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-2-git-send-email-ville.syrjala@linux.intel.com
2016-09-28Merge tag 'v4.8-rc8' into drm-nextDave Airlie1-5/+5
Linux 4.8-rc8 There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge it now to avoid troubles. * tag 'v4.8-rc8': (1442 commits) Linux 4.8-rc8 fault_in_multipages_readable() throws set-but-unused error mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing radix tree: fix sibling entry handling in radix_tree_descend() radix tree test suite: Test radix_tree_replace_slot() for multiorder entries fix memory leaks in tracing_buffers_splice_read() tracing: Move mutex to protect against resetting of seq data MIPS: Fix delay slot emulation count in debugfs MIPS: SMP: Fix possibility of deadlock when bringing CPUs online mm: delete unnecessary and unsafe init_tlb_ubc() huge tmpfs: fix Committed_AS leak shmem: fix tmpfs to handle the huge= option properly blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx MIPS: Fix pre-r6 emulation FPU initialisation arm64: kgdb: handle read-only text / modules arm64: Call numa_store_cpu_info() earlier. locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text nvme-rdma: only clear queue flags after successful connect i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended perf/core: Limit matching exclusive events to one PMU ...
2016-09-06drm: atmel-hlcdc: Fix vertical scalingJan Leupold1-5/+5
The code is applying the same scaling for the X and Y components, thus making the scaling feature only functional when both components have the same scaling factor. Do the s/_w/_h/ replacement where appropriate to fix vertical scaling. Signed-off-by: Jan Leupold <leupold@rsi-elektrotechnik.de> Fixes: 1a396789f65a2 ("drm: add Atmel HLCDC Display Controller support") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-08-19drm: Allow drivers to modify plane_state in prepare_fb/cleanup_fbChris Wilson1-2/+2
The drivers have to modify the atomic plane state during the prepare_fb callback so they track allocations, reservations and dependencies for this atomic operation involving this fb. In particular, how else do we set the plane->fence from the framebuffer! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160818180017.20508-1-chris@chris-wilson.co.uk
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-21 03:16:19 +0300