summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_dp_link_training.h
AgeCommit message (Collapse)AuthorFilesLines
2024-02-27drm/i915/dp: Factor out intel_dp_read_dprx_caps()Imre Deak1-0/+1
Factor out a function to read the sink's DPRX capabilities used by a follow-up patch enabling the DP tunnel BW allocation mode. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-10-imre.deak@intel.com
2023-03-21i915/display/dp: SDP CRC16 for 128b132b link layerArun R Murthy1-0/+2
Enable SDP error detection configuration, this will set CRC16 in 128b/132b link layer. For Display version 13 a hardware bit31 in register VIDEO_DIP_CTL is added to enable/disable SDP CRC applicable for DP2.0 only, but the default value of this bit will enable CRC16 in 128b/132b hence skipping this write. Corrective actions on SDP corruption is yet to be defined. v2: Moved the CRC enable to link training init(Jani N) v3: Moved crc enable to ddi pre enable <Jani N> v4: Separate function for SDP CRC16 (Jani N) Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230302081532.765821-3-arun.r.murthy@intel.com
2022-04-25drm: Rename dp/ to display/Thomas Zimmermann1-1/+1
Rename dp/ to display/ to account for additional display-related helpers, such as HDMI. Update all related include statements. No functional changes. Various drivers, such as i915 and amdgpu, use similar naming scheme by putting code for video-output standards into a local display/ directory. The new directory's name is aligned with this convention. v2: * update commit message (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
2022-02-23Merge tag 'drm-intel-gt-next-2022-02-17' of ↵Rodrigo Vivi1-1/+1
git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next UAPI Changes: - Weak parallel submission support for execlists Minimal implementation of the parallel submission support for execlists backend that was previously only implemented for GuC. Support one sibling non-virtual engine. Core Changes: - Two backmerges of drm/drm-next for header file renames/changes and i915_regs reorganization Driver Changes: - Add new DG2 subplatform: DG2-G12 (Matt R) - Add new DG2 workarounds (Matt R, Ram, Bruce) - Handle pre-programmed WOPCM registers for DG2+ (Daniele) - Update guc shim control programming on XeHP SDV+ (Daniele) - Add RPL-S C0/D0 stepping information (Anusha) - Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas) - Fix KMD and GuC race on accessing PMU busyness (Umesh) - Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh) - Report error on invalid reset notification from GuC (John) - Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston) - Fixes to parallel submission implementation (Matt B.) - Improve GuC loading status check/error reports (John) - Tweak TTM LRU priority hint selection (Matt A.) - Align the plane_vma to min_page_size of stolen mem (Ram) - Introduce vma resources and implement async unbinding (Thomas) - Use struct vma_resource instead of struct vma_snapshot (Thomas) - Return some TTM accel move errors instead of trying memcpy move (Thomas) - Fix a race between vma / object destruction and unbinding (Thomas) - Remove short-term pins from execbuf (Maarten) - Update to GuC version 69.0.3 (John, Michal Wa.) - Improvements to GT reset paths in GuC backend (Matt B.) - Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko) - Use trylock instead of blocking lock when freeing GEM objects (Maarten) - Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.) - Fixes to object unmapping and purging (Matt A) - Check for wedged device in GuC backend (John) - Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten) - Allow dead vm to unbind vma's without lock (Maarten) - s/engine->i915/i915/ for DG2 engine workarounds (Matt R) - Use to_gt() helper for GGTT accesses (Michal Wi.) - Selftest improvements (Matt B., Thomas, Ram) - Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan) From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip rerere cache update")]
2022-02-11drm/i915/dp: add 128b/132b support to link status checksJani Nikula1-0/+4
Abstract link status check to a function that takes 128b/132b and 8b/10b into account, and use it. Also dump link status on failures. Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/cec395d435679a290a1c35fcbfc54555101bfad1.1643878928.git.jani.nikula@intel.com
2022-01-17drm/dp: Move public DisplayPort headers into dp/Thomas Zimmermann1-1/+1
Move all public DisplayPort headers into dp/ and update users. No functional changes. v3: * rebased onto latest drm-tip Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-5-tzimmermann@suse.de
2021-10-06drm/i915: Show LTTPR in the TPS debug printVille Syrjälä1-0/+1
Indicate which LTTPR we're currently attempting to train when we print which training pattern we're using. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211004170535.4173-3-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2021-03-19drm/i915: Relocate intel_dp_program_link_training_pattern()Ville Syrjälä1-0/+3
intel_dp_program_link_training_pattern() clearly belongs in intel_dp_link_training.c. Make it so. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-4-ville.syrjala@linux.intel.com
2021-03-19drm/i915: Disable LTTPR support when the DPCD rev < 1.4Imre Deak1-1/+1
By the specification the 0xF0000-0xF02FF range is only valid when the DPCD revision is 1.4 or higher. Disable LTTPR support if this isn't so. Trying to detect LTTPRs returned corrupted values for the above DPCD range at least on a Skylake host with an LG 43UD79-B monitor with a DPCD revision 1.2 connected. v2: Add the actual version check. v3: Fix s/DRPX/DPRX/ typo. Fixes: 7b2a4ab8b0ef ("drm/i915: Switch to LTTPR transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317190149.4032966-1-imre.deak@intel.com
2021-01-13drm/i915/dp: Fix LTTPR vswing/pre-emp setting in non-transparent modeImre Deak1-1/+2
The DP PHY vswing/pre-emphasis level programming the driver does is related to the DPTX -> first LTTPR link segment only. Accordingly it should be only programmed when link training the first LTTPR and kept as-is when training subsequent LTTPRs and the DPRX. For these latter PHYs the vs/pe levels will be set in response to writing the DP_TRAINING_LANEx_SET_PHY_REPEATERy DPCD registers (by an upstream LTTPR TX PHY snooping this write access of its downstream LTTPR/DPRX RX PHY). The above is also described in DP Standard v2.0 under 3.6.6.1. While at it simplify and add the LTTPR that is link trained to the debug message in intel_dp_set_signal_levels(). Fixes: b30edfd8d0b4 ("drm/i915: Switch to LTTPR non-transparent mode link training") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201229172201.4155327-2-imre.deak@intel.com
2021-01-13drm/i915/dp: Move intel_dp_set_signal_levels() to intel_dp_link_training.cImre Deak1-0/+2
intel_dp_set_signal_levels() is needed for link training, so move it to intel_dp_link_training.c. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201229172201.4155327-1-imre.deak@intel.com
2020-10-12drm/i915: Switch to LTTPR non-transparent mode link trainingImre Deak1-0/+1
The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-12drm/i915: Switch to LTTPR transparent mode link trainingImre Deak1-0/+2
By default LTTPRs should be in transparent link training mode, nevertheless in this patch we switch to this default mode explicitly. The DP Standard recommends this, supposedly because an LTTPR may be left in the non-transparent mode (by BIOS, previous kernel, or after reset due to a firmware bug). I haven't seen this happening, but let's follow the DP Standard. v2: - Add a code comment about the explicit disabling of non-transparent mode. v3: - Move check to prevent initing LTTPRs on eDP to init_dp_lttpr_init(). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-6-imre.deak@intel.com
2020-10-12drm/i915: Fix DP link training pattern maskImre Deak1-0/+6
An LTTPR can be trained with training pattern 4 even if the DPCD revision is < 1.4, but drm_dp_training_pattern_mask() would change pattern 4 to pattern 3 on those DPCD revisions. Since intel_dp_training_pattern() makes already sure that the proper training pattern is used, all that needs to be masked out is the scrambling disable flag, which is or'd to the mask later based on the training pattern. v2: - Use a helper instead of open-coding the masking. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-2-imre.deak@intel.com
2020-10-01drm/i915: Plumb crtc_state to link trainingVille Syrjälä1-2/+6
Get rid of mode crtc->config usage, and some ad-hoc intel_dp state usage by plumbing the crtc state all the way down to the link training code. Unfortunately we do have to keep some cached state in intel_dp so that we can do the "does the link need retraining?" checks from the short hpd handler. v2: Add intel_crtc_state forward declaration v3: Don't kill the PHY test code totally since it's now in the hotplug work where we can get at the states v4: Don't resurrect the debug scrambling disable bit (Imre) Use intel_dp_mst_is_master_trans() (Imre) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201001111053.24451-1-ville.syrjala@linux.intel.com
2020-04-08drm/i915/dp: Made intel_dp_adjust_train() non-staticAnimesh Manna1-0/+4
vswing/pre-emphasis adjustment calculation is needed in processing of auto phy compliance request other than link training, so have made non-static function. No functional change. v1: initial patch. v2: - used "intel_dp" prefix in function name. (Jani) - used array notation instead pointer for link_status. (Ville) v3: Scrapped the initial patch, modified commit description accordingly. - made non-static function and used intel_dp prefix. (Jani, Manasi) Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200316103759.12867-4-animesh.manna@intel.com
2019-06-17drm/i915: move modesetting output/encoder code under display/Jani Nikula1-0/+14
Add a new subdirectory for display code, and start off by moving modesetting output/encoder code. Judging by the include changes, this is a surprisingly clean operation. v2: - move intel_sdvo_regs.h too - use tabs for Makefile file lists and sort them Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-2-jani.nikula@intel.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-28 14:09:29 +0300