summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_device_info.h
AgeCommit message (Collapse)AuthorFilesLines
2021-01-09drm/i915/gt: Only disable preemption on gen8 render enginesChris Wilson1-1/+0
The reason why we did not enable preemption on Broadwater was due to missing GPGPU workarounds. Since this only applies to rcs0, only restrict rcs0 (and our global capabilities). While this does not affect exposing a preemption capability to userspace, it does affect our internal decisions on whether to use timeslicing and semaphores between individual engines. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-6-chris@chris-wilson.co.uk
2020-12-24drm/i915/gt: Consolidate the CS timestamp clocksChris Wilson1-3/+0
Pull the GT clock information [used to derive CS timestamps and PM interval] under the GT so that is it local to the users. In doing so, we consolidate the two references for the same information, of which the runtime-info took note of a potential clock source override and scaling factors. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201223122359.22562-2-chris@chris-wilson.co.uk
2020-10-14drm/i915/jsl: Split EHL/JSL platform info and PCI idsTejas Upadhyay1-0/+1
Recently we came across requirement to identify EHL and JSL platform to program them differently. Thus Split the basic platform definition, macros, and PCI IDs to differentiate between EHL and JSL platforms. Also, IS_ELKHARTLAKE is replaced with IS_JSL_EHL everywhere. Changes since V1 : - Rebased to avoid merge conflicts - Added missed check for jasperlake in intel_uc_fw.c Cc : Matt Roper <matthew.d.roper@intel.com> Cc : Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201013192948.63470-1-tejaskumarx.surendrakumar.upadhyay@intel.com
2020-08-17drm/i915/rkl: Handle HTIMatt Roper1-0/+1
If HTI (also sometimes called HDPORT) is enabled at startup, it may be using some of the PHYs and DPLLs making them unavailable for general usage. Let's read out the HDPORT_STATE register and avoid making use of resources that HTI is already using. v2: - Fix minor checkpatch warnings v3: - Just readout HDPORT_STATE register once during init and then parse it later as needed. - Add a 'has_hti' device info flag to track whether we should readout HDPORT_STATE or not. We can skip the platform/flag tests later since the hti_state in dev_priv will remain 0 for platforms it does not apply to. - Move PLL masking into icl_get_combo_phy_dpll() since at the moment RKL is the only platform that has HTI. (Jose) Bspec: 49189 Bspec: 53707 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-5-matthew.d.roper@intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-07-14drm/i915/dg1: add initial DG-1 definitionsAbdiel Janulgue1-0/+1
Bspec: 33617, 33617 v2: s/intel_dg1_info/dg1_info/ as done for other platforms before and try to shut up compiler about ununsed variable that we know shouldn't be used (Lucas) v3: replace explicit attribute with __maybe_unused (Lucas) Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Vanshidhar Konda <vanshidhar.r.konda@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200713182321.12390-2-lucas.demarchi@intel.com
2020-07-14drm/i915: Add has_master_unit_irq flagStuart Summers1-0/+1
Add flag to differentiate platforms with and without the master IRQ control bit. Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200713182321.12390-1-lucas.demarchi@intel.com
2020-07-08drm/i915/sseu: Move sseu_info under gt_infoVenkata Sandeep Dhanalakota1-3/+0
SSEUs are a GT capability, so track them under gt_info. Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-8-daniele.ceraolospurio@intel.com
2020-07-08drm/i915/sseu: Move sseu detection and dump to intel_sseuDaniele Ceraolo Spurio1-2/+0
Keep all the SSEU code in the relevant file. The code has also been updated to use intel_gt instead of dev_priv. Based on an original patch by Sandeep. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-7-daniele.ceraolospurio@intel.com
2020-07-08drm/i915: Move the engine mask to intel_gt_infoDaniele Ceraolo Spurio1-6/+1
Since the engines belong to the GT, move the runtime-updated list of available engines to the intel_gt struct. The original mask has been renamed to indicate it contains the maximum engine list that can be found on a matching device. In preparation for other info being moved to the gt in follow up patches (sseu), introduce an intel_gt_info structure to group all gt-related runtime info. v2: s/max_engine_mask/platform_engine_mask (tvrtko), fix selftest Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-5-daniele.ceraolospurio@intel.com
2020-07-08drm/i915: Move engine-related mmio init to engines_init_mmioDaniele Ceraolo Spurio1-2/+0
All the info we read in intel_device_info_init_mmio are engine-related and since we already have an engine_init_mmio function we can just perform the operations from there. v2: clarify comment about forcewake requirements and pruning (Chris) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-4-daniele.ceraolospurio@intel.com
2020-06-09drm/i915/rkl: RKL uses ABOX0 for pixel transfersMatt Roper1-0/+2
Rocket Lake uses the same 'abox0' mechanism to handle pixel data transfers from memory that gen11 platforms used, rather than the abox1/abox2 interfaces used by TGL/DG1. For the most part this is a hardware implementation detail that's transparent to driver software, but we do have to program a couple of tuning registers (MBUS_ABOX_CTL and BW_BUDDY registers) according to which ABOX instances are used by a platform. Let's track the platform's ABOX usage in the device info structure and use that to determine which instances of these registers to program. As an exception to this rule is that even though TGL/DG1 use ABOX1+ABOX2 for data transfers, we're still directed to program the ABOX_CTL register for ABOX0; so we'll handle that as a special case. v2: - Store the mask of platform-specific abox registers in the device info structure. - Add a TLB_REQ_TIMER() helper macro. (Aditya) v3: - Squash ABOX and BW_BUDDY patches together and use a single mask for both of them, plus a special-case for programming the ABOX0 instance on all gen12. (Ville) Bspec: 50096 Bspec: 49218 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200606025740.3308880-2-matthew.d.roper@intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2020-06-05drm/i915/rkl: Disable PSR2José Roberto de Souza1-0/+1
RKL doesn't have PSR2 HW tracking, it was replaced by software/manual tracking. The driver is required to track the areas that needs update and program hardware to send selective updates. So until the software tracking is implemented, PSR2 needs to be disabled for platforms without PSR2 HW tracking. BSpec: 50422 BSpec: 50424 Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200603211529.3005059-15-matthew.d.roper@intel.com
2020-06-03drm/i915: Identify Cometlake platformChris Wilson1-0/+1
Cometlake is a small refresh of Coffeelake, but since we have found out a difference in the plaforms, we need to identify them as separate platforms. Since we previously took Coffeelake/Cometlake as identical, update all IS_COFFEELAKE() to also include IS_COMETLAKE(). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200602140541.5481-1-chris@chris-wilson.co.uk
2020-05-20drm/i915/rkl: Add RKL platform info and PCI idsMatt Roper1-0/+1
Introduce the basic platform definition, macros, and PCI IDs. Bspec: 44501 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Caz Yokoyama <caz.yokoyama@intel.com> Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Caz Yokoyama <caz.yokoyama@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-2-matthew.d.roper@intel.com
2020-05-14drm/i915: Store CS timestamp frequency in HzVille Syrjälä1-1/+1
kHz isn't accurate enough for storing the CS timestamp frequency on some of the platforms. Store the value in Hz instead. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302143943.32676-2-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
2020-04-18drm/i915: Refactor setting dma info to a common helperMichael J. Ruhl1-0/+2
DMA_MASK bit values are different for different generations. This will become more difficult to manage over time with the open coded usage of different versions of the device. Fix by: disallow setting of dma mask in AGP path (< GEN(5) for i915, add dma_mask_size to the device info configuration, updating open code call sequence to the latest interface, refactoring into a common function for setting the dma segment and mask info Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> cc: Brian Welty <brian.welty@intel.com> cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200417195107.68732-1-michael.j.ruhl@intel.com
2020-04-03drm/i915: Store cpu_transcoder_mask in device infoVille Syrjälä1-0/+1
We have a bunch of code that would like to know which CPU transcoders are actually present in the hardware. Rather than use various ad-hoc methods let's just include a full bitmask in the device info, alongside pipe_mask. v2: Rebase Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200318170235.15176-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-02-19drm/i915: Read rawclk_freq earlierChris Wilson1-0/+2
Read the rawclk_freq during runtime info probing, prior to its first use in computing the CS timestamp frequency. Then store it in the runtime info, and include it in the debug printouts. Closes: https://gitlab.freedesktop.org/drm/intel/issues/834 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200216163445.555786-1-chris@chris-wilson.co.uk
2020-02-16drm/i915: Track hw reported context runtimeTvrtko Ursulin1-0/+1
GPU saves accumulated context runtime (in CS timestamp units) in PPHWSP which will be useful for us in cases when we are not able to track context busyness ourselves (like with GuC). Keep a copy of this in struct intel_context from where it can be easily read even if the context is not pinned. v2: (Chris) * Do not store pphwsp address in intel_context. * Log CS wrap-around. * Simplify calculation by relying on integer wraparound. v3: * Include total/avg in traces and error state for debugging Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200216133620.394962-1-chris@chris-wilson.co.uk
2020-02-05drm/i915: Manipulate DBuf slices properlyStanislav Lisovskiy1-0/+1
Start manipulating DBuf slices as a mask, but not as a total number, as current approach doesn't give us full control on all combinations of slices, which we might need(like enabling S2 only can't enabled by setting enabled_slices=1). Removed wrong code from intel_get_ddb_size as it doesn't match to BSpec. For now still just use DBuf slice until proper algorithm is implemented. Other minor code refactoring to get prepared for major DBuf assignment changes landed: - As now enabled slices contain a mask we still need some value which should reflect how much DBuf slices are supported by the platform, now device info contains num_supported_dbuf_slices. - Removed unneeded assertion as we are now manipulating slices in a more proper way. v2: Start using enabled_slices in dev_priv v3: "enabled_slices" is now "enabled_dbuf_slices_mask", as this now sits in dev_priv independently. v4: - Fixed debug print formatting to hex(Matt Roper) - Optimized dbuf slice updates to be used only if slice union is different from current conf(Matt Roper) - Fixed some functions to be static(Matt Roper) - Created a parameterized version for DBUF_CTL to simplify DBuf programming cycle(Matt Roper) - Removed unrequred field from GEN10_FEATURES(Matt Roper) v5: - Removed redundant programming dbuf slices helper(Ville Syrjälä) - Started to use parameterized loop for hw readout to get slices (Ville Syrjälä) - Added back assertion checking amount of DBUF slices enabled after DC states 5/6 transition, also added new assertion as starting from ICL DMC seems to restore the last DBuf power state set, rather than power up all dbuf slices as assertion was previously expecting(Ville Syrjälä) v6: - Now using enum for DBuf slices in this patch (Ville Syrjälä) - Removed gen11_assert_dbuf_enabled and put gen9_assert_dbuf_enabled back, as we really need to have a single unified assert here however currently enabling always slice 1 is enforced by BSpec, so we will have to OR enabled slices mask with 1 in order to be consistent with BSpec, that way we can unify that assertion and against the actual state from the driver, but not some hardcoded value.(concluded with Ville) - Remove parameterized DBUF_CTL version, to extract it to another patch.(Ville Syrjälä) v7: - Removed unneeded hardcoded return value for older gens from intel_enabled_dbuf_slices_mask - this now is handled in a unified manner since device info anyway returns max dbuf slices as 1 for older platforms(Matthew Roper) - Now using INTEL_INFO(dev_priv)->num_supported_dbuf_slices instead of intel_dbuf_max_slices function as it is trivial(Matthew Roper) v8: - Fixed icl_dbuf_disable to disable all dbufs still(Ville Syrjälä) v9: - Renamed _DBUF_CTL_S to DBUF_CTL_S(Ville Syrjälä) - Now using power_domain mutex to protect from race condition, which can occur because intel_dbuf_slices_update might be running in parallel to gen9_dc_off_power_well_enable being called from intel_dp_detect for instance, which causes assertion triggered by race condition, as gen9_assert_dbuf_enabled might preempt this when registers were already updated, while dev_priv was not. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-6-stanislav.lisovskiy@intel.com
2019-12-09drm/i915: Flesh out device_info pretty printerChris Wilson1-4/+5
Include all the number fields for describing the GT, as well as the current boolean flags, primarily for inclusion in error states. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191207182937.2583002-1-chris@chris-wilson.co.uk
2019-10-29drm/i915/display/cnl+: Handle fused off DSCJosé Roberto de Souza1-0/+1
DSC could be fused off, so not all GEN10+ platforms will support it. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191026001323.216052-5-jose.souza@intel.com
2019-10-29drm/i915/display: Handle fused off HDCPJosé Roberto de Souza1-0/+1
HDCP could be fused off, so not all GEN9+ platforms will support it. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191026001323.216052-2-jose.souza@intel.com
2019-10-25drm/i915: Add is_dgfx to device infoJosé Roberto de Souza1-0/+1
This will be helpful to diferentiate a set of GPUs with the same GEN version. Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191024195122.22877-1-lucas.demarchi@intel.com
2019-10-18drm/i915: enumerate and init each supported regionAbdiel Janulgue1-0/+2
Nothing to enumerate yet... Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191018090751.28295-1-matthew.auld@intel.com
2019-09-23drm/i915/dsb: feature flag added for display state buffer.Animesh Manna1-0/+1
Display State Buffer(DSB) is a new hardware capability, introduced in GEN12 display. DSB allows a driver to batch-program display HW registers. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-2-animesh.manna@intel.com
2019-09-12drm/i915: convert device info num_pipes to pipe_maskJani Nikula1-1/+1
Replace device info number of pipes with a bit mask of available pipes. This will prove handy in the future. There's still a bunch of future work to do to actually allow a non-consecutive mask of pipes, but it's a start. No functional changes. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190911202908.19631-1-jani.nikula@intel.com
2019-07-31drm/i915/tgl: Tigerlake only has global MOCS registersMichel Thierry1-0/+1
Until Icelake, each engine had its own set of 64 MOCS registers. In order to simplify, Tigerlake moves to only 64 Global MOCS registers, which are no longer part of the engine context. Since these registers are now global, they also only need to be initialized once. >From Gen12 onwards, MOCS must specify the target cache (3:2) and LRU management (5:4) fields and cannot be programmed to 'use the value from Private PAT', because these fields are no longer part of the PPAT. Also cacheability control (1:0) field has changed, 00 no longer means 'use controls from page table', but uncacheable (UC). v2 (Lucas): - Move the changes to the fault registers to a separate commit - the old ones overlap with the range used by the new global MOCS (requested by Daniele) v3 (Lucas): - Clarify comment about setting the unused entries to the same value of index 0, that is the invalid entry (requested by Daniele) - Move changes to DONE_REG and ERROR_GEN6 to a separate commit (requested by Daniele) Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190730180407.5993-5-lucas.demarchi@intel.com
2019-07-25drm/i915/uc: Unify uC platform checkDaniele Ceraolo Spurio1-1/+1
We have several HAS_* checks for GuC and HuC but we mostly use HAS_GUC and HAS_HUC, with only 1 exception. Since our HW always has either both uC or neither of them, just replace all the checks with a unified HAS_UC. v2: use HAS_GT_UC (Michal) v3: fix comment (Michal) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-2-daniele.ceraolospurio@intel.com
2019-07-12drm/i915: Add modular FIAAnusha Srivatsa1-0/+1
Some platforms may have Modular FIA. If Modular FIA is used in the SOC, then Display Driver will access the additional instances of FIA based on pre-assigned offset in GTTMADDR space. Each Modular FIA instance has its own IOSF Sideband Port ID and it houses only 2 Type-C Port. In SOC that has more than two Type-C Ports, there are multiple instances of Modular FIA. Gunit will need to use different destination ID when it access different pair of Type-C Port. The DFLEXDPSP register has Modular FIA bit starting on Tiger Lake. If Modular FIA is used in the SOC, this register bit exists in all the instances of Modular FIA. IOM FW is required to program only the MF bit in first FIA instance that houses the Type-C Port 0 and Port 1, for Display Driver to read from. v2 (Lucas): - Move all accesses to FIA to be contained in intel_tc.c, along with display_fia that is now called tc_phy_fia - Save the fia instance number on intel_digital_port, so we don't have to query if modular FIA is used on every access v3 (Lucas): Make function static v4 (Lucas): Move enum phy_fia to the header and use it in intel_digital_port (suggested by Ville) v5 (Lucas): Add comment about the mapping between FIA and TC port (suggested by Stuart) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712055706.12143-2-lucas.demarchi@intel.com
2019-07-12drm/i915/tgl: add initial Tiger Lake definitionsDaniele Ceraolo Spurio1-0/+2
Tiger Lake is a Intel® Processor containing Intel® HD Graphics. This is just an initial Tiger Lake definition. PCI IDs, generic support and new features coming in following patches. v2 (Lucas): - Remove modular FIA - feature will be re-introduced in future Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-3-lucas.demarchi@intel.com
2019-06-17drm/i915: move modesetting core code under display/Jani Nikula1-2/+2
Now that we have a new subdirectory for display code, continue by moving modesetting core code. display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this is, again, a surprisingly clean operation. v2: - don't move intel_sideband.[ch] (Ville) - use tabs for Makefile file lists and sort them Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com
2019-06-17drm/i915: Change gamma/degamma_lut_size data type to u32Shashank Sharma1-2/+2
Currently, data type of gamma_lut_size & degamma_lut_size elements in intel_device_info is u16, which means it can accommodate maximum 64k values. In case of ICL multisegmented gamma, the size of gamma LUT is 256K. This patch changes the data type of both of these elements to u32. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Uma Shankar <uma.shankar@intel.com> V4: Added Uma's r-b. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1560321900-18318-2-git-send-email-uma.shankar@intel.com
2019-06-12drm/i915: Kill INTEL_SUBPLATFORM_AMLVille Syrjälä1-1/+0
All AML parts are either KBL ULX or CFL ULX so there is no point in keeping INTEL_SUBPLATFORM_AML around. As these are the only CFL ULX parts (normal CFL didn't have Y SKUs) so we'll just replace IS_AML_ULX with IS_CFL_ULX (it was already paired with IS_KBL_ULX which accounts for the other half of the AML parts). Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190605162946.19223-2-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-06-09drm/i915/guc: always use Command Transport BuffersDaniele Ceraolo Spurio1-1/+0
Now that we've moved the Gen9 GuC blobs to version 32 we have CTB support on all gens, so no need to restrict the usage to Gen11+. Note that MMIO communication is still required for CTB initialization. v2: fix commit message nits (Michal) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190606224225.14287-1-daniele.ceraolospurio@intel.com
2019-05-31drm/i915: add force_probe module parameter to replace alpha_supportJani Nikula1-1/+1
The i915.alpha_support module parameter has caused some confusion along the way. Add new i915.force_probe parameter to specify PCI IDs of devices to probe, when the devices are recognized but not automatically probed by the driver. The name is intended to reflect what the parameter effectively does, avoiding any overloaded semantics of "alpha" and "support". The parameter supports "" to disable, "<pci-id>,[<pci-id>,...]" to enable force probe for one or more devices, and "*" to enable force probe for all known devices. Also add new CONFIG_DRM_I915_FORCE_PROBE config option to replace the DRM_I915_ALPHA_SUPPORT option. This defaults to "*" if DRM_I915_ALPHA_SUPPORT=y. Instead of replacing i915.alpha_support immediately, let the two coexist for a while, with a deprecation message, for a transition period. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190506134801.28751-1-jani.nikula@intel.com
2019-05-28drm/i915: Refactor sseu helper functionsStuart Summers1-44/+0
Move functions to intel_sseu.h and remove inline qualifier. Additionally, ensure these are all prefixed with intel_sseu_* to match the convention of other functions in i915. v2: fix spacing from checkpatch warning v3: squash helper function changes into a single patch break 80 character line to fix checkpatch warning move get/set_eus helpers to intel_device_info.c v4: Remove intel_ prefix from static functions in intel_device_info.c and correctly copy changes to stride calculation in those functions. Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-5-stuart.summers@intel.com
2019-05-28drm/i915: Add macro for SSEU stride calculationStuart Summers1-6/+3
Subslice stride and EU stride are calculated multiple times in i915_query. Move this calculation to a macro to reduce code duplication. v2: update headers in intel_sseu.h v3: use GEN_SSEU_STRIDE for stride calculations in intel_sseu.h apply s/bits/max_entries/ to GEN_SSEU_STRIDE parameter Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-3-stuart.summers@intel.com
2019-04-24drm/i915: Move GraphicsTechnology files under gt/Chris Wilson1-2/+4
Start partitioning off the code that talks to the hardware (GT) from the uapi layers and move the device facing code under gt/ One casualty is s/intel_ringbuffer.h/intel_engine.h/ with the plan to subdivide that header and body further (and split out the submission code from the ringbuffer and logical context handling). This patch aims to be simple motion so git can fixup inflight patches with little mess. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190424174839.7141-1-chris@chris-wilson.co.uk
2019-04-24drm/i915: Store the default sseu setup on the engineChris Wilson1-27/+1
As we push for better compartmentalisation, it is more convenient to copy the default sseu configuration from the engine into the derived logical context, than it is to dig it out from i915->runtime_info. v2: Use intel_sseu_from_device_info() to describe the converter Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190424095134.30249-1-chris@chris-wilson.co.uk
2019-04-19drm/i915: Track HAS_RPS alongside HAS_RC6 in the device infoChris Wilson1-0/+1
For consistency (and elegance!), add intel_device_info.has_rps. The immediate boon is that RPS support is now emitted along the other capabilities in the debug log and after errors. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190419134836.5626-1-chris@chris-wilson.co.uk
2019-04-02drm/i915: Move intel_engine_mask_t around for use by i915_request_types.hChris Wilson1-2/+1
We want to use intel_engine_mask_t inside i915_request.h, which means extracting it from the general header file mess and placing it inside a types.h. A knock on effect is that the compiler wants to warn about type-contraction of ALL_ENGINES into intel_engine_maskt_t, so prepare for the worst. v2: Use intel_engine_mask_t consistently v3: Move I915_NUM_ENGINES to its natural home at the end of the enum Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190401162641.10963-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2019-04-01drm/i915: Introduce concept of a sub-platformTvrtko Ursulin1-1/+26
Concept of a sub-platform already exist in our code (like ULX and ULT platform variants and similar),implemented via the macros which check a list of device ids to determine a match. With this patch we consolidate device ids checking into a single function called during early driver load. A few low bits in the platform mask are reserved for sub-platform identification and defined as a per-platform namespace. At the same time it future proofs the platform_mask handling by preparing the code for easy extending, and tidies the very verbose WARN strings generated when IS_PLATFORM macros are embedded into a WARN type statements. v2: Fixed IS_SUBPLATFORM. Updated commit msg. v3: Chris was right, there is an ordering problem. v4: * Catch-up with new sub-platforms. * Rebase for RUNTIME_INFO. * Drop subplatform mask union tricks and convert platform_mask to an array for extensibility. v5: * Fix subplatform check. * Protect against forgetting to expand subplatform bits. * Remove platform enum tallying. * Add subplatform to error state. (Chris) * Drop macros and just use static inlines. * Remove redundant IRONLAKE_M. (Ville) v6: * Split out Ironlake change. * Optimize subplatform check. * Use __always_inline. (Lucas) * Add platform_mask comment. (Paulo) * Pass stored runtime info in error capture. (Chris) v7: * Rebased for new AML ULX device id. * Bump platform mask array size for EHL. * Stop mentioning device ids in intel_device_subplatform_init by using the trick of splitting macros i915_pciids.h. (Jani) * AML seems to be either a subplatform of KBL or CFL so express it like that. v8: * Use one device id table per subplatform. (Jani) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jose Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190327142328.31780-1-tvrtko.ursulin@linux.intel.com
2019-03-26drm/i915: stop storing the media fuseDaniele Ceraolo Spurio1-4/+0
We're already updating the engine_mask to reflect what's in the HW, so we can just get the info from there. A couple of macros have been added to facilitate this. v2: Appease checkpatch Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190322002431.9585-1-daniele.ceraolospurio@intel.com
2019-03-22drm/i915/ehl: Add ElkhartLake platformBob Paauwe1-0/+1
Add ElkhartLake as a unique platform as there are some differences between it and Icelake. Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322175847.25707-2-rodrigo.vivi@intel.com
2019-03-15drm/i915: Drop address size from ppgtt_typeChris Wilson1-1/+0
With the introduction of the separate addressable bits into the device info, we can remove the conflation of the ppgtt size from the ppgtt type. Based on a patch by Bob Paauwe. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-3-chris@chris-wilson.co.uk
2019-03-15drm/i915: Record platform specific ppGTT size in intel_device_infoChris Wilson1-2/+4
As the maximum addressable bits is determined by platform, record that information in our static chipset tables. This has the advantage of being clearly recorded in our capability dumps for dmesg, debugfs and error states. Based on a patch by Bob Paauwe. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-2-chris@chris-wilson.co.uk
2019-03-05drm/i915: Store the BIT(engine->id) as the engine's maskChris Wilson1-3/+3
In the next patch, we are introducing a broad virtual engine to encompass multiple physical engines, losing the 1:1 nature of BIT(engine->id). To reflect the broader set of engines implied by the virtual instance, lets store the full bitmask. v2: Use intel_engine_mask_t (s/ring_mask/engine_mask/) v3: Tvrtko voted for moah churn so teach everyone to not mention ring and use $class$instance throughout. v4: Comment upon the disparity in bspec for using VCS1,VCS2 in gen8 and VCS[0-4] in later gen. We opt to keep the code consistent and use 0-index naming throughout. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190305180332.30900-1-chris@chris-wilson.co.uk
2019-02-05drm/i915: Rename HAS_GMCHRodrigo Vivi1-1/+1
First of all GMCH can be considered a feature by itself since it is a chip present in some platforms that connects the IA processor to memory and other components in PC. Also with the introduction of display block at device info, we got a redundant definition: .display.has_gmch_display = 1, So, let's clean up things a bit and use the standardized way of has_feature on displays side. No functional change and no manual interaction to generate this patch. It is only: sed -si -e 's/has_gmch_display/has_gmch/g' \ -e 's/HAS_GMCH_DISPLAY/HAS_GMCH/g' drivers/gpu/drm/i915/*{c,h} Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190204222538.15842-1-rodrigo.vivi@intel.com
2019-01-31drm/i915: Apply LUT validation checks to platforms more accurately (v3)Matt Roper1-0/+2
Use of the new DRM_COLOR_LUT_NON_DECREASING test was a bit over-zealous; it doesn't actually need to be applied to the degamma on "bdw-style" platforms. Likewise, we overlooked the fact that CHV should have that test applied to the gamma LUT as well as the degamma LUT. Rather than adding more complicated platform checking to intel_color_check(), let's just store the appropriate set of LUT validation flags for each platform in the intel_device_info structure. v2: - Shuffle around LUT size tests so that the hardware-specific tests won't be applied to legacy gamma tables. (Ville) - Add a debug message so that it will be easier to understand why an atomic transaction involving incorrectly-sized LUT's got rejected by the driver. v3: - Switch size_t's to int's. (Ville) Fixes: 85e2d61e4976 ("drm/i915: Validate userspace-provided color management LUT's (v4)") References: https://lists.freedesktop.org/archives/intel-gfx/2019-January/187634.html Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190130181022.4291-1-matthew.d.roper@intel.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-18 22:18:13 +0300