summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/omapdrm
AgeCommit message (Collapse)AuthorFilesLines
2023-07-11drm/client: Send hotplug event after registering a clientThomas Zimmermann1-4/+0
Generate a hotplug event after registering a client to allow the client to configure its display. Remove the hotplug calls from the existing clients for fbdev emulation. This change fixes a concurrency bug between registering a client and receiving events from the DRM core. The bug is present in the fbdev emulation of all drivers. The fbdev emulation currently generates a hotplug event before registering the client to the device. For each new output, the DRM core sends an additional hotplug event to each registered client. If the DRM core detects first output between sending the artificial hotplug and registering the device, the output's hotplug event gets lost. If this is the first output, the fbdev console display remains dark. This has been observed with amdgpu and fbdev-generic. Fix this by adding hotplug generation directly to the client's register helper drm_client_register(). Registering the client and receiving events are serialized by struct drm_device.clientlist_mutex. So an output is either configured by the initial hotplug event, or the client has already been registered. The bug was originally added in commit 6e3f17ee73f7 ("drm/fb-helper: generic: Call drm_client_add() after setup is done"), in which adding a client and receiving a hotplug event switched order. It was hidden, as most hardware and drivers have at least on static output configured. Other drivers didn't use the internal DRM client or still had struct drm_mode_config_funcs.output_poll_changed set. That callback handled hotplug events as well. After not setting the callback in amdgpu in commit 0e3172bac3f4 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed"), amdgpu did not show a framebuffer console if output events got lost. The bug got copy-pasted from fbdev-generic into the other fbdev emulation. Reported-by: Moritz Duge <MoritzDuge@kolahilft.de> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2649 Fixes: 6e3f17ee73f7 ("drm/fb-helper: generic: Call drm_client_add() after setup is done") Fixes: 8ab59da26bc0 ("drm/fb-helper: Move generic fbdev emulation into separate source file") Fixes: b79fe9abd58b ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers") Fixes: 63c381552f69 ("drm/armada: Implement fbdev emulation as in-kernel client") Fixes: 49953b70e7d3 ("drm/exynos: Implement fbdev emulation as in-kernel client") Fixes: 8f1aaccb04b7 ("drm/gma500: Implement client-based fbdev emulation") Fixes: 940b869c2f2f ("drm/msm: Implement fbdev emulation as in-kernel client") Fixes: 9e69bcd88e45 ("drm/omapdrm: Implement fbdev emulation as in-kernel client") Fixes: e317a69fe891 ("drm/radeon: Implement client-based fbdev emulation") Fixes: 71ec16f45ef8 ("drm/tegra: Implement fbdev emulation as in-kernel client") Fixes: 0e3172bac3f4 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Moritz Duge <MoritzDuge@kolahilft.de> Tested-by: Torsten Krah <krah.tm@gmail.com> Tested-by: Paul Schyska <pschyska@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm Link: https://patchwork.freedesktop.org/patch/msgid/20230710091029.27503-1-tzimmermann@suse.de
2023-06-01drm/omapdrm: Use regular fbdev I/O helpersThomas Zimmermann2-8/+4
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Omapdrm does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_SYS_HELPERS option Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tomi Valkeinen <tomba@kernel.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-9-tzimmermann@suse.de
2023-04-06drm/omapdrm: Implement fbdev emulation as in-kernel clientThomas Zimmermann3-62/+90
Move code from ad-hoc fbdev callbacks into DRM client functions and remove the old callbacks. The functions instruct the client to poll for changed output or restore the display. The DRM core calls both, the old callbacks and the new client helpers, from the same places. The new functions perform the same operation as before, so there's no change in functionality. Replace all code that initializes or releases fbdev emulation throughout the driver. Instead initialize the fbdev client by a single call to omapdrm_fbdev_setup() after omapdrm has registered its DRM device. As in most drivers, omapdrm's fbdev emulation now acts like a regular DRM client. The fbdev client setup consists of the initial preparation and the hot-plugging of the display. The latter creates the fbdev device and sets up the fbdev framebuffer. The setup performs display hot-plugging once. If no display can be detected, DRM probe helpers re-run the detection on each hotplug event. A call to drm_dev_unregister() releases the client automatically. No further action is required within omapdrm. If the fbdev framebuffer has been fully set up, struct fb_ops.fb_destroy implements the release. For partially initialized emulation, the fbdev client reverts the initial setup. v2: * init drm_client in this patch (Tomi) * don't handle non-atomic modesetting (Tomi) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230403104035.15288-6-tzimmermann@suse.de
2023-04-06drm/omapdrm: Remove fbdev from struct omap_drm_privateThomas Zimmermann4-12/+6
The DRM device stores a pointer to the fbdev helper. Remove struct omap_drm_private.fbdev, which contains the same value. No functional changes. v2: * don't clear dev->fb_helper unnecessarily (Tomi) * include omap_fbdev.h in omap_fbdev.c (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230403104035.15288-5-tzimmermann@suse.de
2023-04-06drm/omapdrm: Remove bo from struct omap_fbdevThomas Zimmermann1-13/+19
Fbdev's framebuffer stores a pointer to the GEM object. Remove struct omap_fbdev.bo, which contains the same value. No functional changes. v2: * fix commit message (Tomi) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230403104035.15288-4-tzimmermann@suse.de
2023-04-06drm/omapdrm: Remove fb from struct omap_fbdevThomas Zimmermann1-5/+6
Fbdev's struct fb_helper stores a pointer to the framebuffer. Remove struct omap_fbdev.fb, which contains the same value. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230403104035.15288-3-tzimmermann@suse.de
2023-04-06drm/omapdrm: Include <linux/of.h>Thomas Zimmermann1-0/+1
Include <linux/of.h> to get the contained declarations. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230403104035.15288-2-tzimmermann@suse.de
2023-03-14drm: Drop ARCH_MULTIPLATFORM from dependenciesUwe Kleine-König1-1/+1
Some of these dependencies used to be sensible when only a small part of the platforms supported by ARCH=arm could be compiled together in a single kernel image. Nowadays ARCH_MULTIPLATFORM is only used as a guard for kernel options incompatible with a multiplatform image. See commit 84fc86360623 ("ARM: make ARCH_MULTIPLATFORM user-visible") for some more details. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221209220555.3631364-1-u.kleine-koenig@pengutronix.de
2023-03-03Merge tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-1/+1
Pull drm fixes from Dave Airlie: "fbdev: - fix uninit var in error path shmem: - revert unGPLing an export i915: - Don't use stolen memory or BAR mappings for ring buffers with LLC - Add inverted backlight quirk for HP 14-r206nv - Fix GSI offset for MCR lookups - GVT fixes (memleak, debugfs attributes, kconfig, typos) amdgpu: - SMU 13 fixes - Enable TMZ for GC 10.3.6 - Misc display fixes - Buddy allocator fixes - GC 11 fixes - S0ix fix - INFO IOCTL queries for GC 11 - VCN harvest fixes for SR-IOV - UMC 8.10 RAS fixes - Don't restrict bpc to 8 - NBIO 7.5 fix - Allow freesync on PCon for more devices amdkfd: - SDMA fix - Illegal memory access fix" * tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drm: (45 commits) drm/amdgpu/vcn: fix compilation issue with legacy gcc drm/amd/display: Extend Freesync over PCon support for more devices Revert "drm/amd/display: Do not set DRR on pipe commit" drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes drm/amd/display: Ext displays with dock can't recognized after resume drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini drm/amdgpu: remove unused variable ring drm/amd/display: fix dm irq error message in gpu recover drm/amd: Fix initialization for nbio 7.5.1 drm/amd/display: Don't restrict bpc to 8 bpc drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable drm/radeon: Fix eDP for single-display iMac11,2 drm/shmem-helper: Revert accidental non-GPL export drm: omapdrm: Do not use helper unininitialized in omap_fbdev_init() drm/amd/pm: downgrade log level upon SMU IF version mismatch drm/amdgpu: Add ecc info query interface for umc v8_10 drm/amdgpu: Add convert_error_address function for umc v8_10 drm/amdgpu: add bad_page_threshold check in ras_eeprom_check_err drm/amdgpu: change default behavior of bad_page_threshold parameter drm/amdgpu: exclude duplicate pages from UMC RAS UE count ...
2023-02-28drm: omapdrm: Do not use helper unininitialized in omap_fbdev_init()Nathan Chancellor1-1/+1
Clang warns (or errors with CONFIG_WERROR): ../drivers/gpu/drm/omapdrm/omap_fbdev.c:235:6: error: variable 'helper' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (!fbdev) ^~~~~~ ../drivers/gpu/drm/omapdrm/omap_fbdev.c:259:26: note: uninitialized use occurs here drm_fb_helper_unprepare(helper); ^~~~~~ ../drivers/gpu/drm/omapdrm/omap_fbdev.c:235:2: note: remove the 'if' if its condition is always false if (!fbdev) ^~~~~~~~~~~ ../drivers/gpu/drm/omapdrm/omap_fbdev.c:228:30: note: initialize the variable 'helper' to silence this warning struct drm_fb_helper *helper; ^ = NULL 1 error generated. Return early, as there is nothing for the function to do if memory cannot be allocated. There is no point in adding another label to just emit the warning at the end of the function in this case, as memory allocation failures are already logged. Fixes: 3fb1f62f80a1 ("drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()") Link: https://github.com/ClangBuiltLinux/linux/issues/1809 Link: https://lore.kernel.org/oe-kbuild-all/202302250058.fYTe9aTP-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230224-omapdrm-wsometimes-uninitialized-v1-1-3fec8906ee3a@kernel.org
2023-02-24Merge tag 'mm-stable-2023-02-20-13-37' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Daniel Verkamp has contributed a memfd series ("mm/memfd: add F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". * tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits) include/linux/migrate.h: remove unneeded externs mm/memory_hotplug: cleanup return value handing in do_migrate_range() mm/uffd: fix comment in handling pte markers mm: change to return bool for isolate_movable_page() mm: hugetlb: change to return bool for isolate_hugetlb() mm: change to return bool for isolate_lru_page() mm: change to return bool for folio_isolate_lru() objtool: add UACCESS exceptions for __tsan_volatile_read/write kmsan: disable ftrace in kmsan core code kasan: mark addr_has_metadata __always_inline mm: memcontrol: rename memcg_kmem_enabled() sh: initialize max_mapnr m68k/nommu: add missing definition of ARCH_PFN_OFFSET mm: percpu: fix incorrect size in pcpu_obj_full_size() maple_tree: reduce stack usage with gcc-9 and earlier mm: page_alloc: call panic() when memoryless node allocation fails mm: multi-gen LRU: avoid futile retries migrate_pages: move THP/hugetlb migration support check to simplify code migrate_pages: batch flushing TLB migrate_pages: share more code between _unmap and _move ...
2023-02-21drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()Thomas Zimmermann1-0/+2
Move drm_fb_helper_unprepare() from drm_fb_helper_fini() into the calling fbdev implementation. Avoids a possible stale mutex with generic fbdev code. As indicated by its name, drm_fb_helper_prepare() prepares struct drm_fb_helper before setting up the fbdev support with a call to drm_fb_helper_init(). In legacy fbdev emulation, this happens next to each other. If successful, drm_fb_helper_fini() later tear down the fbdev device and also unprepare via drm_fb_helper_unprepare(). Generic fbdev emulation prepares struct drm_fb_helper immediately after allocating the instance. It only calls drm_fb_helper_init() as part of processing a hotplug event. If the hotplug-handling fails, it runs drm_fb_helper_fini(). This unprepares the fb-helper instance and the next hotplug event runs on stale data. Solve this by moving drm_fb_helper_unprepare() from drm_fb_helper_fini() into the fbdev implementations. Call it right before freeing the fb-helper instance. Fixes: 643231b28380 ("drm/fbdev-generic: Minimize hotplug error handling") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230216140620.17699-1-tzimmermann@suse.de
2023-02-10mm: replace vma->vm_flags direct modifications with modifier callsSuren Baghdasaryan1-2/+1
Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26drm/fb-helper: Initialize fb-helper's preferred BPP in prepare functionThomas Zimmermann1-2/+2
Initialize the fb-helper's preferred_bpp field early from within drm_fb_helper_prepare(); instead of the later client hot-plugging callback. This simplifies the generic fbdev setup function. No real changes, but all drivers' fbdev code has to be adapted. v3: * build with CONFIG_DRM_FBDEV_EMULATION unset (kernel test bot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-7-tzimmermann@suse.de
2023-01-17drm/omap: Fix kernel docsTomi Valkeinen2-3/+3
Fix doc related warnings seen with W=1: the function names have changed but the docs have not been changed accordingly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220916082206.167427-2-tomi.valkeinen@ideasonboard.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-05drm/omap: stop using drm_bridge_connector_en/disable_hpd()Dmitry Baryshkov1-41/+0
The functionality of drm_bridge_connector_enable_hpd() and drm_bridge_connector_disable_hpd() is provided automatically by the drm_kms_poll helpers. Stop calling these functions manually. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221102180705.459294-7-dmitry.baryshkov@linaro.org
2022-12-16drm/omap: dsi: Fix excessive stack usageTomi Valkeinen1-10/+16
dsi_dump_dsi_irqs(), a function used for debugfs prints, has a large struct in its frame, which can result in: drivers/gpu/drm/omapdrm/dss/dsi.c:1126:1: warning: the frame size of 1060 bytes is larger than 1024 bytes [-Wframe-larger-than=] As the performance of the function is of no concern, let's allocate the struct with kmalloc instead. Compile-tested only. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220916082206.167427-1-tomi.valkeinen@ideasonboard.com
2022-12-16drm/omapdrm: Remove unused struct csc_coef_rgb2yuvYuan Can1-5/+0
After commit 64ff18911878, struct csc_coef_rgb2yuv is not used any more and can be removed as well. Fixes: 64ff18911878 ("drm/omap: Enable COLOR_ENCODING and COLOR_RANGE properties for planes") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014024810.21675-1-yuancan@huawei.com
2022-11-11drm: Assert held reservation lock for dma-buf mmappingDmitry Osipenko1-0/+2
When userspace mmaps dma-buf's fd, the dma-buf reservation lock must be held. Add locking sanity checks to the dma-buf mmaping callbacks of DRM drivers to ensure that the locking assumptions won't regress in future. Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221110201349.351294-3-dmitry.osipenko@collabora.com
2022-11-05drm/fb-helper: Rename drm_fb_helper_unregister_fbi() to use _info postfixThomas Zimmermann1-1/+1
Rename drm_fb_helper_unregister_fbi() to drm_fb_helper_unregister_info() as part of unifying the naming within fbdev helpers. Adapt drivers. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-15-tzimmermann@suse.de
2022-11-05drm/fb-helper: Rename drm_fb_helper_alloc_fbi() to use _info postfixThomas Zimmermann1-1/+1
Rename drm_fb_helper_alloc_fbi() to drm_fb_helper_alloc_info() as part of unifying the naming within fbdev helpers. Adapt drivers. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-14-tzimmermann@suse.de
2022-11-05drm/fb_helper: Rename field fbdev to info in struct drm_fb_helperThomas Zimmermann1-1/+1
Rename struct drm_fb_helper.fbdev to info. The current name is misleading as it overlaps with generic fbdev naming conventions. Adapt to the usual naming in fbdev drivers by calling the field 'info'. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-13-tzimmermann@suse.de
2022-10-20drm: Remove drm_mode_config::fb_baseZack Rusin1-2/+0
The fb_base in struct drm_mode_config has been unused for a long time. Some drivers set it and some don't leading to a very confusing state where the variable can't be relied upon, because there's no indication as to which driver sets it and which doesn't. The only usage of fb_base is internal to two drivers so instead of trying to force it into all the drivers to get it into a coherent state completely remove it. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Zimmermann <tzimemrmann@suse.de> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221019024401.394617-1-zack@kde.org
2022-10-18drm/omapdrm: Prepare to dynamic dma-buf locking specificationDmitry Osipenko1-2/+2
Prepare OMAP DRM driver to the common dynamic dma-buf locking convention by starting to use the unlocked versions of dma-buf API functions. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017172229.42269-8-dmitry.osipenko@collabora.com
2022-09-09drm/omap: dmm_tiler:Remove the print function dev_err()ye xingchen1-3/+1
From the coccinelle check: ./drivers/gpu/drm/omapdrm/omap_dmm_tiler.c Error:line 817 is redundant because platform_get_irq() already prints an error So,remove the unnecessary print function dev_err() Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220810062738.13554-1-ye.xingchen@zte.com.cn
2022-09-09drm/omap: dss: Fix refcount leak bugsLiang He1-0/+3
In dss_init_ports() and __dss_uninit_ports(), we should call of_node_put() for the reference returned by of_graph_get_port_by_id() in fail path or when it is not used anymore. Fixes: 09bffa6e5192 ("drm: omap: use common OF graph helpers") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220722144348.1306569-1-windhl@126.com
2022-09-09drm: omapdrm: dss: replace ternary operator with max()Guo Zhengkui1-1/+1
Fix the following coccicheck warning: drivers/gpu/drm/omapdrm/dss/dispc.c:2454:21-22: WARNING opportunity for max() Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220517050208.121488-1-guozhengkui@vivo.com
2022-07-26drm: Remove unnecessary include statements of drm_plane_helper.hThomas Zimmermann3-3/+0
Remove the include statement for drm_plane_helper.h from all the files that don't need it. Althogh the header file is almost empty, many drivers include it somewhere. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de
2022-07-05drm: Remove linux/fb.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for linux/fb.h, so don't include it. Avoids useless rebuilds of the entire universe when touching linux/fb.h. Quite a few placs do currently depend on linux/fb.h or other headers pulled in by it without actually including any of it directly. All of those need to be fixed up. v2: Split the vmwgfx change out Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-3-ville.syrjala@linux.intel.com
2022-06-20drm: Drop drm_blend.h from drm_crtc.hVille Syrjälä2-0/+2
drm_crtc.h has no need for drm_blend.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_blend.h. Quite a few placs do currently depend on drm_blend.h without actually including it directly. All of those need to be fixed up. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-4-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-20drm: Drop drm_framebuffer.h from drm_crtc.hVille Syrjälä4-0/+4
drm_crtc.h has no need for drm_frambuffer.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_framebuffer.h. Quite a few placs do currently depend on drm_framebuffer.h without actually including it directly. All of those need to be fixed up. v2: Fix up msm some more v2: Deal with ingenic and shmobile as well Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-20drm: Drop drm_edid.h from drm_crtc.hVille Syrjälä2-0/+2
drm_crtc.h has no need for drm_edid.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_edid.h. Quite a few placs do currently depend on drm_edid.h without actually including it directly. All of those need to be fixed up. v2: Fix up i915 and msm some more v3: Fix alphabetical ordering (Sam) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-04-05Merge drm/drm-next into drm-misc-nextMaxime Ripard1-7/+1
Let's start the 5.19 development cycle. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-03-28Merge tag 'driver-core-5.18-rc1' of ↵Linus Torvalds1-7/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.18-rc1. Not much here, primarily it was a bunch of cleanups and small updates: - kobj_type cleanups for default_groups - documentation updates - firmware loader minor changes - component common helper added and take advantage of it in many drivers (the largest part of this pull request). All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits) Documentation: update stable review cycle documentation drivers/base/dd.c : Remove the initial value of the global variable Documentation: update stable tree link Documentation: add link to stable release candidate tree devres: fix typos in comments Documentation: add note block surrounding security patch note samples/kobject: Use sysfs_emit instead of sprintf base: soc: Make soc_device_match() simpler and easier to read driver core: dd: fix return value of __setup handler driver core: Refactor sysfs and drv/bus remove hooks driver core: Refactor multiple copies of device cleanup scripts: get_abi.pl: Fix typo in help message kernfs: fix typos in comments kernfs: remove unneeded #if 0 guard ALSA: hda/realtek: Make use of the helper component_compare_dev_name video: omapfb: dss: Make use of the helper component_compare_dev power: supply: ab8500: Make use of the helper component_compare_dev ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of iommu/mediatek: Make use of the helper component_compare/release_of drm: of: Make use of the helper component_release_of ...
2022-03-28drm: omapdrm: Do no allocate non-scanout GEMs through DMM/TILERIvaylo Dimitrov1-4/+8
On devices with DMM, all allocations are done through either DMM or TILER. DMM/TILER being a limited resource means that such allocations will start to fail before actual free memory is exhausted. What is even worse is that with time DMM/TILER space gets fragmented to the point that even if we have enough free DMM/TILER space and free memory, allocation fails because there is no big enough free block in DMM/TILER space. Such failures can be easily observed with OMAP xorg DDX, for example - starting few GUI applications (so buffers for their windows are allocated) and then rotating landscape<->portrait while closing and opening new windows soon results in allocation failures. Fix that by mapping buffers through DMM/TILER only when really needed, like, for scanout buffers. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-4-git-send-email-ivo.g.dimitrov.75@gmail.com
2022-03-28drm: omapdrm: Support exporting of non-contiguous GEM BOsIvaylo Dimitrov3-60/+73
Currently code allocates non-scanout BOs from SHMEM and those objects are accessible to userspace by mmap(). However, on devices with no DMM (like OMAP3), the same objects are not accessible by kernel drivers that want to render to them as code refuses to export them. In turn this means that on devices with no DMM, all buffers must be allocated as scanout, otherwise only CPU can access them. On those devices, scanout buffers are allocated from CMA, making those allocations highly unreliable. Fix that by implementing functionality to export SHMEM backed buffers on devices with no DMM. This makes CMA memory only being used when needed, instead for every buffer that has to be off-CPU rendered. Tested on Motorola Droid4 and Nokia N900 Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-3-git-send-email-ivo.g.dimitrov.75@gmail.com
2022-03-28drm: omapdrm: simplify omap_gem_pinIvaylo Dimitrov1-33/+42
Move tiler related code to its own function. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-2-git-send-email-ivo.g.dimitrov.75@gmail.com
2022-03-08drm/omap: fix NULL but dereferenced coccicheck errorWan Jiabing1-1/+1
Fix the following coccicheck warning: ./drivers/gpu/drm/omapdrm/omap_overlay.c:89:22-25: ERROR: r_ovl is NULL but dereferenced. Here should be ovl->idx rather than r_ovl->idx. Fixes: e02b5cc9e898ad ("drm/omap: Add a 'right overlay' to plane state") Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220307095612.409090-1-wanjiabing@vivo.com
2022-02-25drm/omap: plane: Remove redundant color encoding and range initialisationMaxime Ripard1-3/+0
The omap KMS driver will call drm_plane_create_color_properties() with a default encoding and range values of BT601 and Full Range, respectively. Since the initial value wasn't carried over in the state, the driver had to set it again in omap_plane_reset(). However, the helpers have been adjusted to set it properly at reset, so this is not needed anymore. Reviewed-by: Tomi Valkeinen <tomba@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-23-maxime@cerno.tech
2022-02-25drm/omap: plane: Remove redundant zpos initialisationMaxime Ripard1-7/+0
The omap KMS driver will call drm_plane_create_zpos_property() with an init value of the plane index and the plane type. Since the initial value wasn't carried over in the state, the driver had to set it again in omap_plane_reset(). However, the helpers have been adjusted to set it properly at reset, so this is not needed anymore. Reviewed-by: Tomi Valkeinen <tomba@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-15-maxime@cerno.tech
2022-02-25drm/omap: plane: Fix zpos initial value mismatchMaxime Ripard1-1/+11
While the omap_plane_init() function calls drm_plane_create_zpos_property() with an initial value of 0, omap_plane_reset() will force it to another value depending on the plane type. Fix the discrepancy by setting the initial zpos value to the same value in the drm_plane_create_zpos_property() call. Reviewed-by: Tomi Valkeinen <tomba@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-5-maxime@cerno.tech
2022-02-25drm/omap: dss: Make use of the helper component_compare_devYong Wu1-7/+1
Use the common compare helper from component. Cc: Tomi Valkeinen <tomba@kernel.org> Cc: Cai Huoqing <caihuoqing@baidu.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20220214060819.7334-17-yong.wu@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27drm/omap: Add support for the nomodeset kernel parameterJavier Martinez Canillas1-0/+3
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-31-javierm@redhat.com
2022-01-06drm: omapdrm: Fix implicit dma_buf fencingIvaylo Dimitrov1-0/+1
Currently omapdrm driver does not initialize dma_buf_export_info resv member, which leads to a new dma_resv being allocated and attached to the exported dma_buf. This leads to the issue that fences created on dma_buf objects imported by other drivers are ignored by omapdrm, as only fences in gem object resv are waited on. This leads to various issues like displaying incomplete frames. Fix that by initializing dma_buf resv to the resv of the gem object being exported. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Merlijn Wajer <merlijn@wizzup.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1641397018-29872-1-git-send-email-ivo.g.dimitrov.75@gmail.com
2021-12-08omapdrm: dss: mark runtime PM functions __maybe_unusedArnd Bergmann4-8/+8
Using the SET_RUNTIME_PM_OPS() macro causes a warning about the referenced functions when they are marked static but not __maybe_unused: drivers/gpu/drm/omapdrm/dss/dss.c:1572:12: error: unused function 'dss_runtime_suspend' [-Werror,-Wunused-function] drivers/gpu/drm/omapdrm/dss/dss.c:1584:12: error: unused function 'dss_runtime_resume' [-Werror,-Wunused-function] drivers/gpu/drm/omapdrm/dss/dispc.c:4845:12: error: unused function 'dispc_runtime_suspend' [-Werror,-Wunused-function] drivers/gpu/drm/omapdrm/dss/dispc.c:4860:12: error: unused function 'dispc_runtime_resume' [-Werror,-Wunused-function] Fixes: b92f7ea556f8 ("drm/omap: dss: Make use of the helper macro SET_RUNTIME_PM_OPS()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211205131612.3192652-1-arnd@kernel.org
2021-12-08drm/omap: Add a 'right overlay' to plane stateBenoit Parrot7-12/+267
If the drm_plane has a source width that's greater than the max width supported by a single hw overlay, then we assign a 'r_overlay' to it in omap_plane_atomic_check(). Both overlays should have the capabilities required to handle the source framebuffer. The only parameters that vary between the left and right hwoverlays are the src_w, crtc_w, src_x and crtc_x as we just even chop the fb into left and right halves. We also take care of not creating odd width size when dealing with YUV formats. Since both halves need to be 'appear' side by side the zpos is recalculated when dealing with dual overlay cases so that the other planes zpos is consistent. Depending on user space usage it is possible that on occasion the number of requested planes exceeds the numbers of overlays required to display them. In that case a failure would be returned for the plane that cannot be handled at that time. It is up to user space to make sure the H/W resource are not over-subscribed. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-10-narmstrong@baylibre.com
2021-12-08drm/omap: add plane_atomic_print_state supportBenoit Parrot1-0/+14
Now that we added specific item to our subclassed drm_plane_state we can add omap_plane_atomic_print_state() helper to dump out our own driver specific plane state. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-9-narmstrong@baylibre.com
2021-12-08drm/omap: dynamically assign hw overlays to planesBenoit Parrot4-23/+220
(re)assign the hw overlays to planes based on required caps, and to handle situations where we could not modify an in-use plane. This means all planes advertise the superset of formats and properties. Userspace must (as always) use atomic TEST_ONLY step for atomic updates, as not all planes may be available for use on every frame. The mapping of hwoverlays to plane is stored in omap_global_state, so that state updates are atomically committed in the same way that plane/etc state updates are managed. This is needed because the omap_plane_state keeps a pointer to the hwoverlay, and we don't want global state to become out of sync with the plane state if an atomic update fails, we hit deadlock/ backoff scenario, etc. The use of global_state_lock keeps multiple parallel updates which both re-assign hwoverlays properly serialized. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-8-narmstrong@baylibre.com
2021-12-08drm/omap: Add global state as a private atomic objectBenoit Parrot2-3/+105
Global shared resources (like hw overlays) for omapdrm are implemented as a part of atomic state using the drm_private_obj infrastructure available in the atomic core. omap_global_state is introduced as a drm atomic private object. The two funcs omap_get_global_state() and omap_get_existing_global_state() are the two variants that will be used to access omap_global_state. drm_mode_config_init() needs to be called earlier because it creates/initializes the private_obj link list maintained by the atomic framework. The private_obj link list has to exist prior to calling drm_atomic_private_obj_init(). Similarly the cleanup handler are reordered appropriately. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-7-narmstrong@baylibre.com
2021-12-08drm/omap: omap_plane: subclass drm_plane_stateBenoit Parrot1-3/+33
In preparation to add omap plane state specific extensions we need to subclass drm_plane_state and add the relevant helpers. The addition of specific extension will be done separately. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-6-narmstrong@baylibre.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-29 10:03:01 +0300