summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel/panel-simple.c
AgeCommit message (Collapse)AuthorFilesLines
2024-06-24drm/panel: simple: Add missing display timing flags for KOE TX26D202VM0BWALiu Ying1-0/+1
KOE TX26D202VM0BWA panel spec indicates the DE signal is active high in timing chart, so add DISPLAY_FLAGS_DE_HIGH flag in display timing flags. This aligns display_timing with panel_desc. Fixes: 8a07052440c2 ("drm/panel: simple: Add support for KOE TX26D202VM0BWA panel") Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240624015612.341983-1-victor.liu@nxp.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240624015612.341983-1-victor.liu@nxp.com
2024-04-22drm/panel: simple: switch to struct drm_edidJani Nikula1-7/+8
Prefer struct drm_edid based functions over struct edid. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/869e91527e8f9da054d776ed6109c7a6bc6151cb.1713273659.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-17drm/panel: simple: Add Innolux G121XCE-L01 LVDS display supportMarek Vasut1-0/+21
G121XCE-L01 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a driver circuit, and LED backlight system. The screen format is intended to support the 4:3, 1024(H) x 768(V) screen and either 262k/16.7M colors (RGB 6-bits or 8-bits) with LED backlight driver circuit. All input signals are LVDS interface compatible. Documentation [1] and [2] indicate that G121X1-L03 and G121XCE-L01 are effectively identical panels, use the former as RGB 6-bits variant and add the later as RGB 8-bits variant. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf [2] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121XCE-L01_Datasheet.pdf Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-4-marex@denx.de
2024-04-17drm/panel: simple: Convert Innolux G121X1-L03 to display_timingMarek Vasut1-13/+13
Use display_timing instead of drm_display_mode to define a range of possible display timings supported by this panel. This makes the panel support more flexible and improves compatibility. No functional change is expected. The settings are picked from documentation [1] section 6.1 INPUT SIGNAL TIMING SPECIFICATIONS. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-3-marex@denx.de
2024-04-17drm/panel: simple: Add missing Innolux G121X1-L03 format, flags, connectorMarek Vasut1-0/+3
The .bpc = 6 implies .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , add the missing bus_format. Add missing connector type and bus_flags as well. Documentation [1] 1.4 GENERAL SPECIFICATI0NS indicates this panel is capable of both RGB 18bit/24bit panel, the current configuration uses 18bit mode, .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , .bpc = 6. Support for the 24bit mode would require another entry in panel-simple with .bus_format = MEDIA_BUS_FMT_RGB666_1X7X4_SPWG and .bpc = 8, which is out of scope of this fix. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf Fixes: f8fa17ba812b ("drm/panel: simple: Add support for Innolux G121X1-L03") Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-2-marex@denx.de
2024-03-19drm/panel: simple: Add POWERTIP PH128800T006-ZHC01 panel entryNathan Morrisson1-0/+29
Add support for the POWERTIP PH128800T006-ZHC01 10.1" (1280x800) LCD-TFT panel. Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com> Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240318161708.1415484-3-nmorrisson@phytec.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240318161708.1415484-3-nmorrisson@phytec.com
2024-03-13drm/panel: simple: add CMT430B19N00 LCD panel supportJérémie Dautheribes1-0/+29
Add support for Crystal Clear Technology CMT430B19N00 4.3" 480x272 TFT-LCD panel. Suggested-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240313172016.387277-4-jeremie.dautheribes@bootlin.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240313172016.387277-4-jeremie.dautheribes@bootlin.com
2024-02-19drm/panel: simple: Add BOE BP082WX1-100 8.2" panelTony Lindgren1-0/+20
The BOE BP082WX1-100 is a 8.2" panel similar to the 10.1" panel BP101WX1-100. Both panels use the same timings. Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240211111703.7567-2-tony@atomide.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240211111703.7567-2-tony@atomide.com
2024-02-07Merge drm/drm-next into drm-misc-nextThomas Zimmermann1-0/+2
Backmerging to update drm-misc-next to the state of v6.8-rc3. Also fixes a build problem with xe. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-02-07drm/panel: simple: push blanking limit on RK32FN48HRaphael Gallais-Pou1-2/+2
Push horizontal front porch and vertical back porch blanking limit. This allows to get a 60 fps sharp. Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240205-ltdc_mp13-v1-5-116d43ebba75@foss.st.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240205-ltdc_mp13-v1-5-116d43ebba75@foss.st.com
2024-02-07drm/panel: simple: fix flags on RK043FN48HRaphael Gallais-Pou1-1/+2
DISPLAY_FLAGS_SYNC_POSEDGE is missing in the flags on the default timings. When overriding the default mode with one described in the device tree, the mode does not get acked because of this missing flag. Moreover since the panel is driven by the positive edge it makes sense to add it here. Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240205-ltdc_mp13-v1-4-072d24bf1b36@foss.st.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240205-ltdc_mp13-v1-4-072d24bf1b36@foss.st.com
2024-01-29drm/panel: simple: Add EDT ETML1010G3DRA panelPrimoz Fiser1-0/+30
Add support for the EDT ETML1010G3DRA 10.1" 1280x800 LVDS panel. Datasheet can be found at [1]. [1] https://www.glynshop.com/erp/owweb/Daten/DSS/EDT/Products/Specifications/Active%20Displays/ETML1010G3DRA%20Ver.3-RoHS.pdf Signed-off-by: Primoz Fiser <primoz.fiser@norik.com> Signed-off-by: Yannic Moog <y.moog@phytec.de> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-2-8ec5b48eec05@phytec.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-2-8ec5b48eec05@phytec.de
2024-01-22Merge v6.8-rc1 into drm-misc-fixesMaxime Ripard1-0/+96
Let's kickstart the 6.8 fix cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-01-12drm: panel: simple: convert LG LB070WV8 fixed mode into display timingsAlexander Stein1-12/+12
At least the pixelclock has a range which can vary. Convert fixed mode into display timings so they can be overwritten in DT if necessary. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240110082245.417736-1-alexander.stein@ew.tq-group.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240110082245.417736-1-alexander.stein@ew.tq-group.com
2024-01-12drm: panel-simple: add missing bus flags for Tianma tm070jvhg[30/33]Markus Niebel1-0/+2
The DE signal is active high on this display, fill in the missing bus_flags. This aligns panel_desc with its display_timing. Fixes: 9a2654c0f62a ("drm/panel: Add and fill drm_panel type field") Fixes: b3bfcdf8a3b6 ("drm/panel: simple: add Tianma TM070JVHG33") Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20231012084208.2731650-1-alexander.stein@ew.tq-group.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231012084208.2731650-1-alexander.stein@ew.tq-group.com
2023-12-11drm/panel: simple: Add AUO G156HAN04.0 LVDS display supportElmar Albert1-0/+34
G156HAN04.0 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a driver circuit, and LED backlight system. The screen format is intended to support the 16:9 FHD, 1920(H) x 1080(V) screen and 16.7M colors (RGB 8-bits) with LED backlight driving circuit. All input signals are LVDS interface compatible. G156HAN04.0 is designed for a display unit of notebook style personal computer and industrial machine. Signed-off-by: Elmar Albert <ealbert@data-modul.com> Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20231209063714.1381913-2-marex@denx.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231209063714.1381913-2-marex@denx.de
2023-12-05drm/panel-simple: add Evervision VGG644804 panel entryMichael Walle1-0/+30
Timings taken from the datasheet, although sometimes there are just typical values and it's not clear if they are no min and max values or if you must use the typical value exactly. To make things worse, there is no back porch but only a combined sync and back porch length. Unfortunately, there is not public datasheet. Therefore, here are the relevant timings: | min | typ | max | -----------------+-----+--------+-----+ CLK frequency | - | 25.175 | - | HS period | - | 800 | - | HS pulse width | 5 | 30 | - | HS-DEN time | 112 | 144 | 175 | DEN pulse width | - | 640 | - | VS pulse width | 1 | 3 | 5 | VS-DEN time | - | 35 | - | VS period | - | 525 | - | Signed-off-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231123102404.2022201-2-mwalle@kernel.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231123102404.2022201-2-mwalle@kernel.org
2023-12-05drm/panel: simple: Add BOE BP101WX1-100 panelTony Lindgren1-0/+32
This panel is found on Motorola mapphone tablets from mz615 to mz617. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231127051547.15023-2-tony@atomide.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231127051547.15023-2-tony@atomide.com
2023-11-19drm/panel: simple: Fix Innolux G101ICE-L01 timingsMarek Vasut1-6/+6
The Innolux G101ICE-L01 datasheet [1] page 17 table 6.1 INPUT SIGNAL TIMING SPECIFICATIONS indicates that maximum vertical blanking time is 40 lines. Currently the driver uses 29 lines. Fix it, and since this panel is a DE panel, adjust the timings to make them less hostile to controllers which cannot do 1 px HSA/VSA, distribute the delays evenly between all three parts. [1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de
2023-11-19drm/panel: simple: Fix Innolux G101ICE-L01 bus flagsMarek Vasut1-0/+1
Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description, ones which match both the datasheet and the panel display_timing flags . Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231008223315.279215-1-marex@denx.de
2023-10-23BackMerge tag 'v6.6-rc7' into drm-nextDave Airlie1-0/+35
This is needed to add the msm pr which is based on a higher base. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-10-12drm/panel: Move AUX B116XW03 out of panel-edp back to panel-simpleDouglas Anderson1-0/+35
In commit 5f04e7ce392d ("drm/panel-edp: Split eDP panels out of panel-simple") I moved a pile of panels out of panel-simple driver into the newly created panel-edp driver. One of those panels, however, shouldn't have been moved. As is clear from commit e35e305eff0f ("drm/panel: simple: Add AUO B116XW03 panel support"), AUX B116XW03 is an LVDS panel. It's used in exynos5250-snow and exynos5420-peach-pit where it's clear that the panel is hooked up with LVDS. Furthermore, searching for datasheets I found one that makes it clear that this panel is LVDS. As far as I can tell, I got confused because in commit 88d3457ceb82 ("drm/panel: auo,b116xw03: fix flash backlight when power on") Jitao Shi added "DRM_MODE_CONNECTOR_eDP". That seems wrong. Looking at the downstream ChromeOS trees, it seems like some Mediatek boards are using a panel that they call "auo,b116xw03" that's an eDP panel. The best I can guess is that they actually have a different panel that has similar timing. If so then the proper panel should be used or they should switch to the generic "edp-panel" compatible. When moving this back to panel-edp, I wasn't sure what to use for .bus_flags and .bus_format and whether to add the extra "enable" delay from commit 88d3457ceb82 ("drm/panel: auo,b116xw03: fix flash backlight when power on"). I've added formats/flags/delays based on my (inexpert) analysis of the datasheet. These are untested. NOTE: if/when this is backported to stable, we might run into some trouble. Specifically, before 474c162878ba ("arm64: dts: mt8183: jacuzzi: Move panel under aux-bus") this panel was used by "mt8183-kukui-jacuzzi", which assumed it was an eDP panel. I don't know what to suggest for that other than someone making up a bogus panel for jacuzzi that's just for the stable channel. Fixes: 88d3457ceb82 ("drm/panel: auo,b116xw03: fix flash backlight when power on") Fixes: 5f04e7ce392d ("drm/panel-edp: Split eDP panels out of panel-simple") Tested-by: Anton Bambura <jenneron@postmarketos.org> Acked-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230925150010.1.Iff672233861bcc4cf25a7ad0a81308adc3bda8a4@changeid
2023-10-11Merge drm/drm-next into drm-misc-nextThomas Zimmermann1-13/+13
Updating drm-misc-next to the state of Linux v6.6-rc2. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2023-10-09drm/panel-simple: allow LVDS format overrideJohannes Zink1-0/+53
Some panels support multiple LVDS data mapping formats, which can be used e.g. run displays on jeida-18 format when only 3 LVDS lanes are available. Add parsing of an optional data-mapping devicetree property, which also touches up the bits per color to match the bus format. Signed-off-by: Johannes Zink <j.zink@pengutronix.de> Link: https://lore.kernel.org/r/20230523-simplepanel_support_nondefault_datamapping-v5-3-0d7928edafab@pengutronix.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230523-simplepanel_support_nondefault_datamapping-v5-3-0d7928edafab@pengutronix.de
2023-09-22Merge tag 'drm-misc-next-2023-09-11-1' of ↵Dave Airlie1-0/+29
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.7-rc1: UAPI Changes: - Nouveau changed to not set NO_PREFETCH flag explicitly. Cross-subsystem Changes: - Update documentation of dma-buf intro and uapi. - fbdev/sbus fixes. - Use initializer macros in a lot of fbdev drivers. - Add Boris Brezillon as Panfrost driver maintainer. - Add Jessica Zhang as drm/panel reviewer. - Make more fbdev drivers use fb_ops helpers for deferred io. - Small hid trailing whitespace fix. - Use fb_ops in hid/picolcd Core Changes: - Assorted small fixes to ttm tests, drm/mst. - Documentation updates to bridge. - Add kunit tests for some drm_fb functions. - Rework drm_debugfs implementation. - Update xe documentation to mark todos as completed. Driver Changes: - Add support to rockchip for rv1126 mipi-dsi and vop. - Assorted small fixes to nouveau, bridge/samsung-dsim, bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper, komeda, virtio, ssd130x. - Add support for simple panels Mitsubishi AA084XE01, JDI LPM102A188A, - Documentation updates to accel/ivpu. - Some nouveau scheduling/fence fixes. - Power management related fixes and other fixes to ivpu. - Assorted bridge/it66121 fixes. - Make platform drivers return void in remove() callback. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
2023-08-24BackMerge tag 'v6.5-rc7' into drm-nextDave Airlie1-12/+12
Linux 6.5-rc7 This is needed for the CI stuff and the msm pull has fixes in it. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-08-16drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clockLuca Ceresoli1-1/+1
This panel has been implemented in commit eae7488814b5 ("drm/panel-simple: Add Innolux G156HCE-L01 panel entry") with a higher clock than the typical one mentioned on the documentation to avoid flickering on the unit tested. Testing on a different unit shows that the panel actually works with the intended 70.93 MHz clock and even lower frequencies so the flickering is likely caused either by a defective unit or by other different components such as the bridge. Fixes: eae7488814b5 ("drm/panel-simple: Add Innolux G156HCE-L01 panel entry") Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Tested-by: Marek Vasut <marex@denx.de> # MX8MM with LT9211 Reviewed-by: Marek Vasut <marex@denx.de> [narmstrong: fixed commit id in commit msg] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230814134024.397739-1-luca.ceresoli@bootlin.com
2023-08-14drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docsLuca Ceresoli1-12/+12
Commit 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") added support for this panel model, but the timings it implements are very different from what the datasheet describes. I checked both the G121EAN01.0 datasheet from [0] and the G121EAN01.4 one from [1] and they all have the same timings: for example the LVDS clock typical value is 74.4 MHz, not 66.7 MHz as implemented. Replace the timings with the ones from the documentation. These timings have been tested and the clock frequencies verified with an oscilloscope to ensure they are correct. Also use struct display_timing instead of struct drm_display_mode in order to also specify the minimum and maximum values. [0] https://embedded.avnet.com/product/g121ean01-0/ [1] https://embedded.avnet.com/product/g121ean01-4/ Fixes: 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230804151239.835216-1-luca.ceresoli@bootlin.com
2023-08-14drm/panel: simple: Add support for Mitsubishi AA084XE01Thomas Weber1-0/+29
Add support for the Mitsubishi AA084XE01 panel which is an 8.4 inch XGA TFT-LCD module for industrial use. Link: https://www.mouser.fr/datasheet/2/274/aa084xe01_e-364171.pdf Signed-off-by: Thomas Weber <thomas.weber@corscience.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230807123138.67443-2-miquel.raynal@bootlin.com
2023-08-03drm/panel-simple: Add Innolux G156HCE-L01 panel entryMarek Vasut1-0/+34
Add support for Innolux G156HCE-L01 15.6" 1920x1080 24bpp dual-link LVDS TFT panel. Documentation is available at [1]. The middle frequency is tuned slightly upward from 70.93 MHz to 72 MHz, otherwise the panel shows slight flicker. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G156HCE-L01_Rev.C3_Datasheet.pdf Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230731210258.256152-2-marex@denx.de
2023-07-31drm/panel: simple: Add missing connector type and pixel format for AUO T215HVN01Marek Vasut1-1/+3
The connector type and pixel format are missing for this panel, add them to prevent various drivers from failing to determine either of those parameters. Fixes: 7ee933a1d5c4 ("drm/panel: simple: Add support for AUO T215HVN01") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230709134914.449328-1-marex@denx.de
2023-07-31drm: panel: simple: specify bpc for powertip_ph800480t013_idf02Dmitry Baryshkov1-0/+1
Specify bpc value for the powertip_ph800480t013_idf02 panel to stop drm code from complaining about unexpected bpc value (0). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230727172445.1548834-1-dmitry.baryshkov@linaro.org
2023-07-28drm/panel: simple: Simplify matching using of_device_get_match_data()Geert Uytterhoeven1-9/+6
Both the patform_driver and mipi_dsi_driver structures contain pointers to the match table used, so the custom code to obtain match and match data can be replaced by calls to of_device_get_match_data(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/64ded5b7e809e4c6e915b2c4d8b82e02319cd206.1690535800.git.geert+renesas@glider.be
2023-07-24Merge drm/drm-next into drm-misc-nextThomas Zimmermann1-0/+2
Backmerging to get v6.5-rc2. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2023-07-20drm/panel: simple: Drop prepared_timeMarek Vasut1-4/+0
This has been superseded by RPM in commit 3235b0f20a0a ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare") and the last user of the non-RPM case has been dropped in commit b6d5ffce11dd ("drm/panel-simple: Non-eDP panels don't need "HPD" handling") whatever is left in this driver is just assigned and never used. Drop the remaining parts. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230709162253.464299-1-marex@denx.de
2023-07-17Merge tag 'drm-misc-next-2023-07-13' of ↵Daniel Vetter1-4/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.6: UAPI Changes: * fbdev: * Make fbdev userspace interfaces optional; only leaves the framebuffer console active * prime: * Support dma-buf self-import for all drivers automatically: improves support for many userspace compositors Cross-subsystem Changes: * backlight: * Fix interaction with fbdev in several drivers * base: Convert struct platform.remove to return void; part of a larger, tree-wide effort * dma-buf: Acquire reservation lock for mmap() in exporters; part of an on-going effort to simplify locking around dma-bufs * fbdev: * Use Linux device instead of fbdev device in many places * Use deferred-I/O helper macros in various drivers * i2c: Convert struct i2c from .probe_new to .probe; part of a larger, tree-wide effort * video: * Avoid including <linux/screen_info.h> Core Changes: * atomic: * Improve logging * prime: * Remove struct drm_driver.gem_prime_mmap plus driver updates: all drivers now implement this callback with drm_gem_prime_mmap() * gem: * Support execution contexts: provides locking over multiple GEM objects * ttm: * Support init_on_free * Swapout fixes Driver Changes: * accel: * ivpu: MMU updates; Support debugfs * ast: * Improve device-model detection * Cleanups * bridge: * dw-hdmi: Improve support for YUV420 bus format * dw-mipi-dsi: Fix enable/disable of DSI controller * lt9611uxc: Use MODULE_FIRMWARE() * ps8640: Remove broken EDID code * samsung-dsim: Fix command transfer * tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups * Cleanups * ingenic: * Kconfig REGMAP fixes * loongson: * Support display controller * mgag200: * Minor fixes * mxsfb: * Support disabling overlay planes * nouveau: * Improve VRAM detection * Various fixes and cleanups * panel: * panel-edp: Support AUO B116XAB01.4 * Support Visionox R66451 plus DT bindings * Cleanups * ssd130x: * Support per-controller default resolution plus DT bindings * Reduce memory-allocation overhead * Cleanups * tidss: * Support TI AM625 plus DT bindings * Implement new connector model plus driver updates * vkms * Improve write-back support * Documentation fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
2023-07-11Merge v6.5-rc1 into drm-misc-fixesMaxime Ripard1-2/+133
Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-06-30drm/panel: simple: Add Powertip PH800480T013 drm_display_mode flagsMarek Vasut1-0/+1
Add missing drm_display_mode DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC flags. Those are used by various bridges in the pipeline to correctly configure its sync signals polarity. Fixes: d69de69f2be1 ("drm/panel: simple: Add Powertip PH800480T013 panel") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230615201602.565948-1-marex@denx.de
2023-06-22drm/panel: simple: Add connector_type for innolux_at043tn24Fabio Estevam1-0/+1
The innolux at043tn24 display is a parallel LCD. Pass the 'connector_type' information to avoid the following warning: panel-simple panel: Specify missing connector_type Signed-off-by: Fabio Estevam <festevam@denx.de> Fixes: 41bcceb4de9c ("drm/panel: simple: Add support for Innolux AT043TN24") Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230620112202.654981-1-festevam@gmail.com
2023-06-08drm/panel: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the drm panel drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-36-u.kleine-koenig@pengutronix.de
2023-06-07drm/panel: simple: add support for Rocktech RK043FN48H panelDario Binacchi1-0/+29
Add support for Rocktech RK043FN48H 4.3" (480x272) LCD-TFT panel. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306020343.jNTWeM0P-lkp@intel.com/ Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230607063139.621351-6-dario.binacchi@amarulasolutions.com
2023-05-26drm/panel: simple: fix active size for Ampire AM-480272H3TMQW-T01HDario Binacchi1-2/+2
The previous setting was related to the overall dimension and not to the active display area. In the "PHYSICAL SPECIFICATIONS" section, the datasheet shows the following parameters: ---------------------------------------------------------- | Item | Specifications | unit | ---------------------------------------------------------- | Display area | 98.7 (W) x 57.5 (H) | mm | ---------------------------------------------------------- | Overall dimension | 105.5(W) x 67.2(H) x 4.96(D) | mm | ---------------------------------------------------------- Fixes: 966fea78adf2 ("drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> [narmstrong: fixed Fixes commit id length] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230516085039.3797303-1-dario.binacchi@amarulasolutions.com
2023-05-26drm/panel: simple: Add Ampire AM-800480L1TMQW-T00HGeert Uytterhoeven1-0/+33
Add support for the Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD panel. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/244d9471e0ed248ff2dea8ded3a5384a1c51904b.1684931026.git.geert+renesas@glider.be
2023-05-11drm/panel: panel-simple: Add BOE EV121WXM-N10-1850 panel supportLiu Ying1-0/+34
Add BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel support. The panel has a LVDS display interface. The panel's product specification can be found at: http://www.onetech.com.tw/files/EV121WXM-N10-1850ProductSpecification_20180801.pdf Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230508083826.1016206-3-victor.liu@nxp.com
2023-04-21drm/panel: simple: Add InnoLux G070ACE-L01Richard Leitner1-0/+35
Add InnoLux G070ACE-L01 7" 800x480 TFT LCD with WLED backlight panel support. Timing data was extracted from datasheet and vendor provided EDID file. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230201-innolux-g070ace-v2-2-2371e251dd40@skidata.com
2022-11-30drm/panel-simple: Use ktime_get_boottime for delaysDrew Davenport1-3/+3
ktime_get_boottime continues while the device is suspended. This change ensures that the resume path will not be delayed if the power off delay has already been met while the device is suspended Signed-off-by: Drew Davenport <ddavenport@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.3.Iebd9f79aba0a62015fd2383fe6986c2d6fe12cfd@changeid
2022-11-10drm/panel: simple: set bpc field for logic technologies displaysAishwarya Kothari1-0/+2
In case bpc is not set for a panel it then throws a WARN(). Add bpc to the panels logictechno_lt170410_2whc and logictechno_lt161010_2nh. Fixes: 5728fe7fa539 ("drm/panel: simple: add display timings for logic technologies displays") Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220831141622.39605-1-francesco.dolcini@toradex.com
2022-10-05Merge tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-12/+76
Pull drm updates from Dave Airlie: "Lots of stuff all over, some new AMD IP support and gang submit support. i915 has further DG2 and Meteorlake pieces, and a bunch of i915 display refactoring. msm has a shrinker rework. There are also a bunch of conversions to use kunit. This has two external pieces, some MEI changes needed for future Intel discrete GPUs. These should be acked by Greg. There is also a cross maintainer shared tree with some backlight rework from Hans in here. Core: - convert selftests to kunit - managed init for more objects - move to idr_init_base - rename fb and gem cma helpers to dma - hide unregistered connectors from getconnector ioctl - DSC passthrough aux support - backlight handling improvements - add dma_resv_assert_held to vmap/vunmap edid: - move luminance calculation to core fbdev: - fix aperture helper usage fourcc: - add more format helpers - add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx - add packed AYUV8888, XYUV8888 - add some kunit tests ttm: - allow bos without backing store - rewrite placement to use intersect/compatible functions dma-buf: - docs update - improve signalling when debugging udmabuf: - fix failure path GPF dp: - drop dp/mst legacy code - atomic mst state support - audio infoframe packing panel: - Samsung LTL101AL01 - B120XAN01.0 - R140NWF5 RH - DMT028VGHMCMI-1A T - AUO B133UAN02.1 - IVO M133NW4J-R3 - Innolux N120ACA-EA1 amdgpu: - Gang submit support - Mode2 reset for RDNA2 - New IP support: DCN 3.1.4, 3.2 SMU 13.x NBIO 7.7 GC 11.x PSP 13.x SDMA 6.x GMC 11.x - DSC passthrough support - PSP fixes for TA support - vangogh GFXOFF stats - clang fixes - gang submit CS cleanup prep work - fix VRAM eviction issues amdkfd: - GC 10.3 IP ISA fixes - fix CRIU regression - CPU fault on COW mapping fixes i915: - align fw versioning with kernel practices - add display substruct to i915 private - add initial runtime info to driver info - split out HDCP and backlight registers - MEI XeHP SDV GSC support - add per-gt sysfs defaults - TLB invalidation improvements - Disable PCI BAR resize on 32-bit - GuC firmware updates and compat changes - GuC log timestamp translation - DG2 preemption workaround changes - DG2 improved HDMI pixel clocks support - PCI BAR sanity checks - Enable DC5 on DG2 - DG2 DMC fw bumped - ADL-S PCI ID added - Meteorlake enablement - Rename ggtt_view to gtt_view - host RPS fixes - release mmaps on rpm suspend on discrete - clocking and dpll refactoring - VBT definitions and parsing updates - SKL watermark code extracted to separate file - allow seamless M/N changes on eDP panels - BUG_ON removal and cleanups msm: - DPU: simplified VBIF configuration cleanup CTL interfaces - DSI: removed unused msm_display_dsc_config struct switch regulator calls to new API switched to PANEL_BRIDGE for direct attached panels - DSI_PHY: convert drivers to parent_hws - DP: cleanup pixel_rate handling - HDMI: turned hdmi-phy-8996 into OF clk provider - misc dt-bindings fixes - choose eDP as primary display if it's available - support getting interconnects from either the mdss or the mdp5/dpu device nodes - gem: Shrinker + LRU re-work: - adds a shared GEM LRU+shrinker helper and moves msm over to that - reduce lock contention between retire and submit by avoiding the need to acquire obj lock in retire path (and instead using resv seeing obj's busyness in the shrinker - fix reclaim vs submit issues - GEM fault injection for triggering userspace error paths - Map/unmap optimization - Improved robustness for a6xx GPU recovery virtio: - improve error and edge conditions handling - convert to use managed helpers - stop exposing LINEAR modifier mgag200: - split modeset handling per model udl: - suspend/disconnect handling improvements vc4: - rework HDMI power up - depend on PM - better unplugging support ast: - resolution handling improvements ingenic: - add JZ4760(B) support - avoid a modeset when sharpness property is unchanged - use the new PM ops it6505: - power seq and clock updates ssd130x: - regmap bulk write - use atomic helpers instead of simple helpers via: - rename via_drv to via_dri1, consolidate all code. radeon: - drop DP MST experimental support - delayed work flush fix - use time_after ti-sn65dsi86: - DP support mediatek: - MT8195 DP support - drop of_gpio header - remove unneeded result - small DP code improvements vkms: - RGB565, XRGB64 and ARGB64 support sun4i: - tv: convert to atomic rcar-du: - Synopsys DW HDMI bridge DT bindings update exynos: - use drm_display_info.is_hdmi - correct return of mixer_mode_valid and hdmi_mode_valid omap: - refcounting fix rockchip: - RK3568 support - RK3399 gamma support" * tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits) drm/amdkfd: Fix UBSAN shift-out-of-bounds warning drm/amdkfd: Track unified memory when switching xnack mode drm/amdgpu: Enable sram on vcn_4_0_2 drm/amdgpu: Enable VCN DPG for GC11_0_1 drm/msm: Fix build break with recent mm tree drm/panel: simple: Use dev_err_probe() to simplify code drm/panel: panel-edp: Use dev_err_probe() to simplify code drm/panel: simple: Add Multi-Inno Technology MI0800FT-9 dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel drm/amdgpu: correct the memcpy size for ip discovery firmware drm/amdgpu: Skip put_reset_domain if it doesn't exist drm/amdgpu: remove switch from amdgpu_gmc_noretry_set drm/amdgpu: Fix mc_umc_status used uninitialized warning drm/amd/display: Prevent OTG shutdown during PSR SU drm/amdgpu: add page retirement handling for CPU RAS drm/amdgpu: use RAS error address convert api in mca notifier drm/amdgpu: support to convert dedicated umc mca address drm/amdgpu: export umc error address convert interface drm/amdgpu: fix sdma v4 init microcode error drm/amd/display: fix array-bounds error in dc_stream_remove_writeback() ...
2022-09-30drm/panel: simple: Use dev_err_probe() to simplify codeYuan Can1-6/+3
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-3-yuancan@huawei.com
2022-09-29drm/panel: simple: Add Multi-Inno Technology MI0800FT-9Christoph Niedermaier1-0/+33
Add Multi-Inno Technology MI0800FT-9 8" 800x600 DPI panel support. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220812114832.4946-1-cniedermaier@dh-electronics.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-15 21:03:28 +0300