Age | Commit message (Collapse) | Author | Files | Lines |
|
PMU uapi is likely to change in the future. Till the uapi is finalized,
remove PMU from Xe. PMU can be re-added after uapi is finalized.
v2: Include xe_drm.h in xe/tests/xe_dma_buf.c (Francois)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Rename supports_mmio_ext and supports_usm to use a has_ prefix so the
flags are grouped together. This settles on just one variant for
positive info matching ("has_") and one for negative ("skip_").
Also make sure the has_* flags are grouped together in xe_pci.c.
Reviewed-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20231205145235.2114761-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The Local Memory Translation Table (LMTT) provides additional
abstraction for Virtual Functions (VF) accessing device VRAM.
This code is based on prior work of Michal Winiarski.
In this patch we focus only on LMTT initialization. Remaining LMTT
functions will be used once we add a VF provisioning to the PF.
Bspec: 44117, 52404, 59314
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20231128151507.1015-4-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Ensure that there are no drm clients when changing CCS mode.
Allow exec_queue creation only with enabled CCS engines.
v2: Rebase
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Per device, set this flag to access the MTCFG register or to skip it.
This is done to standardise Xe driver naming if an access to any HW
should be avoided.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Per device, set this flag to enable access to the PCODE uC or to skip it.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This flag can be used to disable GuC based power management. This
could be used for debug or comparison to host based C6.
v2: Fix missing definition
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Future uapi needs to give userspace the ability to select the pat_index
for a given vm_bind. However we need to be able to extract the coherency
mode from the provided pat_index to ensure it's compatible with the
cpu_caching mode set at object creation. There are various security
reasons for why this matters. However the pat_index itself is very
platform specific, so seems reasonable to annotate each platform
definition of the pat table. On some older platforms there is no
explicit coherency mode, so we just pick whatever makes sense.
v2:
- Simplify with COH_AT_LEAST_1_WAY
- Add some kernel-doc
v3 (Matt Roper):
- Some small tweaks
v4:
- Rebase
v5:
- Rebase on Xe2 PAT additions
v6:
- Rebase on removal of coh_mode from uapi
Bspec: 45101, 44235 #xe
Bspec: 70552, 71582, 59400 #xe2
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Pallavi Mishra <pallavi.mishra@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Filip Hazubski <filip.hazubski@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Cc: Zhengguo Xu <zhengguo.xu@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Pallavi Mishra <pallavi.mishra@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We will be adding support for the SR-IOV and driver might be then
running, in addition to existing non-virtualized bare-metal mode,
also in Physical Function (PF) or Virtual Function (VF) mode.
Since these additional modes require some changes to the driver,
define enum flag to represent different SR-IOV modes and add a
function where we will detect the actual mode in the runtime.
We start with a forced bare-metal mode as it is sufficient to
enable basic functionality and ensures no impact to existing code.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231115073804.1861-2-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The Single Root I/O Virtualization (SR-IOV) extension to
the PCI Express (PCIe) specification suite is supported
starting from 12th generation of Intel Graphics processors.
Add a device flag that we will use to enable SR-IOV specific
code paths and to indicate our readiness to support SR-IOV.
We will enable this flag for the specific platforms once all
required changes and additions will be ready and merged.
Bspec: 52391
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231115073804.1861-1-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add a "private:" comment to the part of the struct that is not expected
to be documented, the one with display-related fields. This silence the
following warnings:
$ find drivers/gpu/drm/xe -name '*.[ch]' -not -path 'drivers/gpu/drm/xe/display/*' | xargs ./scripts/kernel-doc -Werror -none
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'display' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'pch_type' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'pch_id' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'wm_lv_0_adjust_needed' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'num_channels' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'symmetric_memory' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'type' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'num_qgv_points' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'num_psf_gv_points' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'dram_info' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'runtime_pm' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'sb_lock' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'skl_preferred_vco_freq' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'max_dotclk_freq' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'hti_state' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'snps_phy_failed_calibration' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'modeset_restore_state' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'global_obj_list' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'de_irq_mask' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'display_irqs_enabled' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'enabled_irq_mask' not described in 'xe_device'
drivers/gpu/drm/xe/xe_device_types.h:316: warning: Function parameter or member 'params' not described in 'xe_device'
22 warnings as Errors
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20230315004902.2622613-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there.
We do this by recompiling i915/display code twice.
Now that i915 has been adapted to support the Xe build, we can add
the xe/display support.
This initial work is a collaboration of many people and unfortunately
this squashed patch won't fully honor the proper credits.
But let's try to add a few from the squashed patches:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Driver initiated function-reset (FLR) is the highest level of reset
that we can trigger from within the driver. In contrast to PCI FLR it
doesn't require re-enumeration of PCI BAR. It can be useful in case
GT fails to reset. It is also the only way to trigger GSC reset from
the driver and can be used in future addition of GSC support.
v2:
- use regs from xe_regs.h
- move the flag to xe.mmio
- call flr only on root gt
- use BIOS protection check
- copy/paste comments from i915
v3:
- flr code moved to xe_device.c
v4:
- needs_flr_on_fini moved to xe_device
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Create mei-gscfi auxiliary device and configure interrupts
to be consumed by mei-gsc device driver.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Mark support of MEI-GSC interaction per device.
Add has_heci_gscfi indication to xe_device and xe_pci structures.
Mark DG1 and DG2 devices as supported.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Besides the regular MMIO space that exists by default, MMIO
extension support & MMIO extension tile size should both be
defined per device, and updated from the device's descriptor.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Moti Haimovski <mhaimovski@habana.ai>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Skip reading this register as it is not relevant in the new devices.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Moti Haimovski <mhaimovski@habana.ai>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Xe driver currently supports 22-bit addresses for MMIO access.
Future platforms will have additional MMIO extension with
larger address spaces, and to access them, the driver will
have to support wider address representation.
Please note that while the XE_REG macro is used for MMIO access,
XE_REG_EXT macro will be used for MMIO-extension access.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Moti Haimovski <mhaimovski@habana.ai>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Expose Card reactive sustained (pl1) power limit as power_max and
card default power limit (tdp) as power_rated_max.
v2:
- Fix review comments (Riana)
v3:
- Use drmm_mutex_init (Matt Brost)
- Print error value (Matt Brost)
- Convert enums to uppercase (Matt Brost)
- Avoid extra reg read in hwmon_is_visible function (Riana)
- Use xe_device_assert_mem_access when applicable (Matt Brost)
- Add intel-xe@lists.freedesktop.org in Documentation (Matt Brost)
v4:
- Use prefix xe_hwmon prefix for all functions (Matt Brost/Andi)
- %s/hwmon_reg/xe_hwmon_reg (Andi)
- Fix review comments (Guenter/Andi)
v5:
- Fix review comments (Riana)
v6:
- Use drm_warn in default case (Rodrigo)
- s/ENODEV/EOPNOTSUPP (Andi)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20230925081842.3566834-2-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Some of the PAT entries are relevant for internal driver use, which
varies per platform. Let the PAT early initialization set what they
should point to so the rest of the driver can use them where needed.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230927193902.2849159-9-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Split the PAT initialization between SW-only and HW. The _early() only
sets up the ops and data structure that are used later to program the
tables. This allows the PAT to be easily extended to other platforms.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230927193902.2849159-6-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On platforms with multiple BCS engines (i.e., PVC and Xe2), not all BCS
engines are created equal. The BCS0 engine is what the specs refer to
as a "resource copy engine," which supports the platform's full set of
copy/fill instructions. In contast, the non-BCS0 "service copy" engines
are more streamlined and only support a subset of the GPU instructions
supported by the resource copy engine. Platforms with both types of
copy engines always support the MEM_COPY and MEM_SET instructions which
can be used for simple copy and fill operations on either type of BCS
engine. Since the simple MEM_SET instruction meets the needs of Xe's
migrate code (and since the more elaborate XY_FAST_COLOR_BLT instruction
isn't available to use on service copy engines), we always prefer to use
MEM_SET for clearing buffers on our newer platforms.
We've been using a 'has_link_copy_engine' feature flag to keep track of
which platforms should use MEM_SET for fills. However a feature flag
like this is unnecessary since we can already derive the presence of
service copy engines (and in turn the MEM_SET instruction) just by
looking at the platform's pre-fusing engine list. Utilizing the engine
list for this also avoids mistakes like we've made on Xe2 where we
forget to set the feature flag in the IP definition.
For clarity, "service copy" is a general term that covers any blitter
engines that support a limited subset of the overall blitter instruction
set (in practice this is any non-BCS0 blitter engine). The "link copy
engines" introduced on PVC and the "paging copy engine" present in Xe2
are both instances of service copy engines.
v2:
- Rewrite / expand the commit message. (Bala)
- Fix checkpatch whitespace error.
Bspec: 65019
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Link: https://lore.kernel.org/r/20230927205143.2695089-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add drm-client infrastructure to record stats of consumption
done by individual drm client.
V2:
- Typo - CI
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
There are a set of engine group busyness counters provided by HW which are
perfect fit to be exposed via PMU perf events.
BSPEC: 46559, 46560, 46722, 46729, 52071, 71028
events can be listed using:
perf list
xe_0000_03_00.0/any-engine-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/copy-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/interrupts/ [Kernel PMU event]
xe_0000_03_00.0/media-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/render-group-busy-gt0/ [Kernel PMU event]
and can be read using:
perf stat -e "xe_0000_8c_00.0/render-group-busy-gt0/" -I 1000
time counts unit events
1.001139062 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
2.003294678 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
3.005199582 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
4.007076497 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
5.008553068 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
6.010531563 43520 ns xe_0000_8c_00.0/render-group-busy-gt0/
7.012468029 44800 ns xe_0000_8c_00.0/render-group-busy-gt0/
8.013463515 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
9.015300183 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.017233010 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.971934120 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
The pmu base implementation is taken from i915.
v2:
Store last known value when device is awake return that while the GT is
suspended and then update the driver copy when read during awake.
v3:
1. drop init_samples, as storing counters before going to suspend should
be sufficient.
2. ported the "drm/i915/pmu: Make PMU sample array two-dimensional" and
dropped helpers to store and read samples.
3. use xe_device_mem_access_get_if_ongoing to check if device is active
before reading the OA registers.
4. dropped format attr as no longer needed
5. introduce xe_pmu_suspend to call engine_group_busyness_store
6. few other nits.
v4: minor nits.
v5: take forcewake when accessing the OAG registers
v6:
1. drop engine_busyness_sample_type
2. update UAPI documentation
v7:
1. update UAPI documentation
2. drop MEDIA_GT specific change for media busyness counter.
Co-developed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Co-developed-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Starting with Xe2, a 5-level page table is always used, regardless of
the actual virtual address range supported by the platform. The two
values need to be tracked separately in the device descriptor since Xe2
platforms only have a 48 bit virtual address range.
Bspec: 59505, 65637, 70817
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The choice of Y-major tiling format (either the legacy "TileY" or the
newer "Tile4") is based on graphics IP version (12.50 and beyond have
Tile4, earlier platforms have TileY). The tracking in xe was originally
added to allow re-using display from i915. However as of i915 commit
4ebf43d0488f ("drm/i915: Eliminate has_4tile feature flag"), the display
code determines TileY vs Tile4 itself, so this can be removed from xe.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230817230407.909816-10-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Make a xe_mem_region structure which will be used in the
coming patches. The new structure is used in both xe device
level (xe->mem.vram) and xe_tile level (tile->vram).
Make the definition of xe_mem_region.dpa_base to be the DPA
base of this memory region and change codes according to
this new definition.
v1:
- rename xe_mem_region.base to dpa_base per conversation with Mike
Ruhl
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Engine was inappropriately used to refer to execution queues and it
also created some confusion with hardware engines. Where it applies
the exec_queue variable name is changed to q and comments are also
updated.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/162
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The module parameter should reflect the name of the optional,
experimental and unsafe option, rather than the default one.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
It looks like there is at least one race here, given that the
pm_runtime_suspended() check looks to return false if we are in the
process of suspending the device (RPM_SUSPENDING vs RPM_SUSPENDED). We
later also do xe_pm_runtime_get_if_active(), but since the device is
suspending or has now suspended, this doesn't do anything either.
Following from this we can potentially return from
xe_device_mem_access_get() with the device suspended or about to be,
leading to broken behaviour.
Attempt to fix this by always grabbing the runtime ref when our internal
ref transitions from 0 -> 1. The hard part is then dealing with the
runtime_pm callbacks also calling xe_device_mem_access_get() and
deadlocking, which the pm_runtime_suspended() check prevented.
v2:
- ct->lock looks to be primed with fs_reclaim, so holding that and then
allocating memory will cause lockdep to complain. Now that we
unconditionally grab the mem_access.lock around mem_access_{get,put}, we
need to change the ordering wrt to grabbing the ct->lock, since some of
the runtime_pm routines can allocate memory (or at least that's what
lockdep seems to suggest). Hopefully not a big deal. It might be that
there were already issues with this, just that the atomics where
"hiding" the potential issues.
v3:
- Use Thomas Hellström' idea with tracking the active task that is
executing in the resume or suspend callback, in order to avoid
recursive resume/suspend calls deadlocking on itself.
- Split the ct->lock change.
v4:
- Add smb_mb() around accessing the pm_callback_task for extra safety.
(Thomas Hellström)
v5:
- Clarify the kernel-doc for the mem_access.lock, given that it is quite
strange in what it protects (data vs code). The real motivation is to
aid lockdep. (Rodrigo Vivi)
v6:
- Split out the lock change. We still want this as a lockdep aid but
only for the xe_device_mem_access_get() path. Sticking a lock on the
put() looks be a no-go, also the runtime_put() there is always async.
- Now that the lock is gone move to atomics and rely on the pm code
serialising multiple callers on the 0 -> 1 transition.
- g2h_worker_func() looks to be the next issue, given that
suspend-resume callbacks are using CT, so try to handle that.
v7:
- Add xe_device_mem_access_get_if_ongoing(), and use it in
g2h_worker_func().
v8 (Anshuman):
- Just always grab the rpm, instead of just on the 0 -> 1 transition,
which is a lot clearer and simplifies the code quite a bit.
v9:
- Make sure we also adjust the CT fast-path with if-active.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/258
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Acked-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Don't init pcode and restore VRAM objects in vain.
We can rely on primary GT GUC_STATUS to detect whether
card has really lost power even when d3cold is allowed by xe.
Adding d3cold.lost_power flag to avoid pcode init and vram
restoration.
Also cleaning up the TODO code comment.
v2:
- %s/xe_guc_has_lost_power()/xe_guc_in_reset().
- Used existing gt instead of new variable. [Rodrigo]
- Added kernel-doc function comment. [Rodrigo]
- xe_guc_in_reset() return true if failed to get fw.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718080703.239343-6-anshuman.gupta@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add per pci device vram_d3cold_threshold Sysfs to
control the d3cold allowed knob.
Adding a d3cold structure embedded in xe_device to encapsulate
d3cold related stuff.
v2:
- Check total vram before initializing default threshold. [Riana]
- Add static scope to vram_d3cold_threshold DEVICE_ATTR. [Riana]
v3:
- Fixed cosmetics review comment. [Riana]
- Fixed CI Hook failures.
- Used drmm_mutex_init().
v4:
- Fixed kernel-doc warnings.
v5:
- Added doc explaining need for the device sysfs. [Rodrigo]
- Removed TODO comment.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718080703.239343-4-anshuman.gupta@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Adding pci d3cold_capable check in order to initialize
d3cold_allowed as false statically.
It avoids vram save/restore latency during runtime
suspend/resume
v2:
- Added else block to xe_pci_runtime_idle. [Rodrigo]
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718080703.239343-2-anshuman.gupta@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Remove almost all existing style issues of type SPACING reported
by checkpatch.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Current size member of vram struct does not give
complete information as what "size" contains. Does
it contain reserved portions or not. Name it usable
size and accordingly describe other size members as
well.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add sysfs entry to read per tile physical memory
including stolen memory.
V5:
- rename var name and make it part of vram struct - Lucas
V4:
- %s/addr_range/physical_vram_size_byes, make it
user readable name - Joonas/Aravind
- Display in bytes - Joonas/Aravind
V3:
- Exclude DG1, replace sysfs_create_file/files - Aravind
V2:
- Use DEVICE_ATTR_RO - Aravind
- Dont put kobj on sysfs_file_create fail - Himal
- Skip addr_range sysfs create for non dgfx - Himal
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We have recently introduced tile for each gpu,
so lets add sysfs entry per tile for userspace
to provide required information specific to tile.
V5:
- define ktype as const
V4:
- Reorder headers - Aravind
V3:
- Make API to return void and add drm_warn - Aravind
V2:
- Add logs in failure path
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Allow xe_device_get_gt() and for_each_gt() to operate as expected on
platforms with standalone media.
FIXME: We need to figure out a consistent ID scheme for GTs. This patch
keeps the pre-existing behavior of 0/1 being the GT IDs for both PVC
(multi-tile) and MTL (multi-GT), but depending on the direction we
decide to go with uapi, we may change this in the future (e.g., to
return 0/1 on PVC and 0/2 on MTL). Or if we decide we only need to
expose tiles to userspace and not GTs, we may not even need ID numbers
for the GTs anymore.
v2:
- Restructure a bit to make the assertions more clear.
- Clarify in commit message that the goal here is to preserve existing
behavior; UAPI-visible changes may be introduced in the future once
we settle on what we really want.
v3:
- Store total GT count in xe_device for ease of lookup. (Brian)
- s/(id__++)/(id__)++/ (Gustavo)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Brian Welty <brian.welty@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-29-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This media_gt pointer isn't actually allocated yet. Future patches will
start hooking it up at appropriate places in the code, and then creation
of the media GT will be added once those infrastructure changes are in
place.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-20-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In preparation for re-adding media GT support, switch the primary GT
within the tile to a dynamic allocation.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-19-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Migration primarily focuses on the memory associated with a tile, so it
makes more sense to track this at the tile level (especially since the
driver was already skipping migration operations on media GTs).
Note that the blitter engine used to perform the migration always lives
in the tile's primary GT today. In theory that could change if media
GTs ever start including blitter engines in the future, but we can
extend the design if/when that happens in the future.
v2:
- Fix kunit test build
- Kerneldoc parameter name update
v3:
- Removed leftover prototype for removed function. (Gustavo)
- Remove unrelated / unwanted error handling change. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-15-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Since memory and address spaces are a tile concept rather than a GT
concept, we need to plumb tile-based handling through lots of
memory-related code.
Note that one remaining shortcoming here that will need to be addressed
before media GT support can be re-enabled is that although the address
space is shared between a tile's GTs, each GT caches the PTEs
independently in their own TLB and thus TLB invalidation should be
handled at the GT level.
v2:
- Fix kunit test build.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-13-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On platforms with VRAM, the VRAM is associated with the tile, not the
GT.
v2:
- Unsquash the GGTT handling back into its own patch.
- Fix kunit test build
v3:
- Tweak the "FIXME" comment to clarify that this function will be
completely gone by the end of the series. (Lucas)
v4:
- Move a few changes that were supposed to be part of the GGTT patch
back to that commit. (Gustavo)
v5:
- Kerneldoc parameter name fix.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-11-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The GGTT exists at the tile level. When a tile contains multiple GTs,
they share the same GGTT.
v2:
- Include some changes that were mis-squashed into the VRAM patch.
(Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-9-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Each tile has its own register region in the BAR, containing instances
of all registers for the platform. In contrast, the multiple GTs within
a tile share the same MMIO space; there's just a small subset of
registers (the GSI registers) which have multiple copies at different
offsets (0x0 for primary GT, 0x380000 for media GT). Move the register
MMIO region size/pointers to the tile structure, leaving just the GSI
offset information in the GT structure.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-7-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Create a new xe_tile structure to begin separating the concept of "tile"
from "GT." A tile is effectively a complete GPU, and a GT is just one
part of that. On platforms like MTL, there's only a single full GPU
(tile) which has its IP blocks provided by two GTs. In contrast, a
"multi-tile" platform like PVC is basically multiple complete GPUs
packed behind a single PCI device.
For now, just create xe_tile as a simple wrapper around xe_gt. The
items in xe_gt that are truly tied to the tile rather than the GT will
be moved in future patches. Support for multiple GTs per tile (i.e.,
the MTL standalone media case) will also be re-introduced in a future
patch.
v2:
- Fix kunit test build
- Move hunk from next patch to use local tile variable rather than
direct xe->tiles[id] accesses. (Lucas)
- Mention compute in kerneldoc. (Rodrigo)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The current method of sizing GT device memory is not quite right.
Update the algorithm to use the relevant HW information and offsets
to set up the sizing correctly.
Update the stolen memory sizing to reflect the changes, and to be
GT specific.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
"Right sizing" the PCI BAR is not necessary. If rebar is needed
size to the maximum available.
Preserve the force_vram_bar_size sizing.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The goal is to use devcoredump infrastructure to report error states
captured at the crash time.
The error state will contain useful information for GPU hang debug, such
as INSTDONE registers and the current buffers getting executed, as well
as any other information that helps user space and allow later replays of
the error.
The proposal here is to avoid a Xe only error_state like i915 and use
a standard dev_coredump infrastructure to expose the error state.
For our own case, the data is only useful if it is a snapshot of the
time when the GPU crash has happened, since we reset the GPU immediately
after and the registers might have changed. So the proposal here is to
have an internal snapshot to be printed out later.
Also, usually a subsequent GPU hang can be only a cause of the initial
one. So we only save the 'first' hang. The dev_coredump has a delayed
work queue where it remove the coredump and free all the data within a
few moments of the error. When that happens we also reset our capture
state and allow further snapshots.
Right now this infra only print out the time of the hang. More information
will be migrated here on subsequent work. Also, in order to organize the
dump better, the goal is to propose dev_coredump changes itself to allow
multiple files and different controls. But for now we start Xe usage of
it without any dependency on dev_coredump core changes.
v2: Add dma_fence annotation for capture that might happen during long
running. (Thomas and Matt)
Use xe->drm.primary->index on drm_info msg. (Jani)
v3: checkpatch fixes
v4: Fix building and locking issues found by Francois.
Actually let's kill all of the locking in here. gt_reset serialization
already guarantee that there will be only one capture at the same time.
Also, the devcoredump has its own locking to protect the free and reads
and drivers don't need to duplicate it.
Besides this, the dma_fence locking was pushed to a following patch
since it is not needed in this one.
Fix a use after free identified by KASAN: Do not stash the faulty_engine
since that will be freed somewhere else.
v5: Fix Uptime - ktime_get_boottime actually returns the Uptime. (Francois)
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
Some driver initialization is conditional on the presence of an LLC.
Add an extra feature flag to support this.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230410183910.2696628-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|