| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For non-RCS engines, nearly all of the LRC state is composed of MI
instructions (specifically MI_LOAD_REGISTER_IMM). Providing a dump
interface allows us to verify that the context image layout matches
what's documented in the bspec, and also allows us to check whether LRC
workarounds are being properly captured by the default state we record
at startup.
For now, the non-MI instructions found in the RCS and CCS engines will
dump as "unknown;" parsing of those will be added in a follow-up patch.
v2:
- Add raw instruction header as well as decoded meaning. (Lucas)
- Check that num_dw isn't greater than remaining_dw for instructions
that have a "# dwords" field. (Lucas)
- Clarify comment about skipping over ppHWSP. (Lucas)
Bspec: 64993
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231016163449.1300701-13-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This is useful to debug cache issues, to double check if the PAT
indexes match what they were supposed to be set to from spec.
v2: Add separate functions for XeHP, XeHPC and XeLPG so it correctly
reads the index based on MCR/REG registers and also decodes the
fields (Matt Roper)
v3: Starting with XeHPC, do not translate values to human-readable
formats as the main goal is to make it easy to compare the table
with the spec. Also, share a single array for xelp/xehp str map
(Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231006182325.3617685-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The XE_WARN_ON macro maps to WARN_ON which is not justified
in many cases where only a simple debug check is needed.
Replace the use of the XE_WARN_ON macro with the new xe_assert
macros which relies on drm_*. This takes a struct drm_device
argument, which is one of the main changes in this commit. The
other main change is that the condition is reversed, as with
XE_WARN_ON a message is displayed if the condition is true,
whereas with xe_assert it is if the condition is false.
v2:
- Rebase
- Keep WARN splats in xe_wopcm.c (Matt Roper)
v3:
- Rebase
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Use the generic drm_warn instead of the driver-specific XE_WARN_ON
in cases where XE_WARN_ON is used to unconditionally print a debug
message.
v2: Rebase
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Replace calls to XE_BUG_ON() with calls XE_WARN_ON() which in turn calls
WARN() instead of BUG(). BUG() crashes the kernel and should only be
used when it is absolutely unavoidable in case of catastrophic and
unrecoverable failures, which is not the case here.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Those messages are unnecessary because a generic message is already
produced in case of allocation failure. Besides, this also removes a
misuse of the XE_IOCTL_DBG macro.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Only call access_put after dropping the forcewake. In theory the device
could suspend, but really we want to start asserting that we have a
mem_access.ref when touching mmio.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Remove some style issues of type COMPLEX_MACRO reported by checkpatch.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Since memory and address spaces are a tile concept rather than a GT
concept, we need to plumb tile-based handling through lots of
memory-related code.
Note that one remaining shortcoming here that will need to be addressed
before media GT support can be re-enabled is that although the address
space is shared between a tile's GTs, each GT caches the PTEs
independently in their own TLB and thus TLB invalidation should be
handled at the GT level.
v2:
- Fix kunit test build.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-13-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The GGTT exists at the tile level. When a tile contains multiple GTs,
they share the same GGTT.
v2:
- Include some changes that were mis-squashed into the VRAM patch.
(Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-9-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add a "workarounds" node in debugfs that can dump all the active
workarounds using the information recorded by rtp infra when those
workarounds were processed.
v2: move workarounds to be reported per-GT
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230526164358.86393-8-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The goal is to allow for a snapshot capture to be taken at the time
of the crash, while the print out can happen at a later time through
the exposed devcoredump virtual device.
v2: Addressing these Matthew comments:
- Handle memory allocation failures.
- Do not use GFP_ATOMIC on cases like debugfs prints.
- placement of @reg doc.
- identation issues.
v3: checkpatch
v4: Rebase and get back to GFP_ATOMIC only.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
The media GT requires a valid gt->kernel_bb_pool during driver probe to
allocate the WA and NOOP batchbuffers used to record default context
images. Dynamically allocate the bb_pools so that the primary and media
GT can use the same pool during driver init.
The media GT still shouldn't be need the USM pool, so only hook up the
kernel_bb_pool for now.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20230410200229.2726648-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add debugfs entry to dump the final tables with register save-restore
information.
For the workarounds, this has a format a little bit different than when the
values are applied because we don't want to read the values from the HW
when dumping via debugfs. For whitelist it just re-uses the print
function added for when the whitelist is being built.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-5-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Sort includes and split them in blocks:
1) .h corresponding to the .c. Example: xe_bb.c should have a "#include
"xe_bb.h" first.
2) #include <linux/...>
3) #include <drm/...>
4) local includes
5) i915 includes
This is accomplished by running
`clang-format --style=file -i --sort-includes drivers/gpu/drm/xe/*.[ch]`
and ignoring all the changes after the includes. There are also some
manual tweaks to split the blocks.
v2: Also sort includes in headers
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Adding a debugfs dump of GGTT was useful for some debugging I did,
and easy to add. Might be useful for others too.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Not used, let's remove this.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
|
|
Fence will be signaled when TLB invalidation completion.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
TLB invalidations no longer just restricted to USM, move the variables
to own sub-structure.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
TLB invalidation is used by more than USM (page faults) so break this
code out into its own file.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
