| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Change xe_mmio_in_range() to use the same logic to account for the GT's
adj_offset as the read and write functions. This is needed when checking
ranges for the MCR registers if the GT has an offset to adjust.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230908225227.1276610-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Xe2 media has a few types of MCR registers, but all except for "GPMXMT"
can safely steer to instance 0,0. GPMXMT follows the same rules that
MTL's OADDRM ranges did, so it can re-use the same enum value.
Bspec: 71186
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Xe2 uses the same steering control register and steering semaphore
register as MTL. As with recent platforms, group/instance 0,0 is
sufficient to target a non-terminated instance for most classes of MCR
registers; the only types of ranges that need to consider platform
fusing to find a non-terminated instance are SLICE/DSS ranges and a new
SQIDI_PSMI type of range.
Note that the range of valid bits in XE2_NODE_ENABLE_MASK may be reduced
for some Xe2 SKUs. However the lowest bits are always valid and only
the lowest instance is obtained via __ffs(), so there's no need to
complicate the masking with extra platform/subplatform checks.
Also note that Wa_14017387313 suggests skipping MCR lock acquisition
around GAM and GAMWKR registers to prevent MCR register accesses in an
interrupt handler from deadlocking when the steering semaphore is
already held outside the interrupt context. At this time Xe never
issues MCR accesses from within an interrupt handler so the workaround
is not currently needed.
v2:
- [0x008700-0x0087FF] range to extend up to 0x887F (Matt Attwood)
- [0x00EF00-0x00F4FF] -> [0x00F000, 0xFFFF] to follow latest
bspec version (Bala)
Bspec: 71185
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
in commit 81593af6c88d ("drm/xe: Convert xe_mmio_wait32 to us so we can
stop using wait_for_us.") the mcr semaphore register read was
accidentally switched from waiting for the register to go to 1 to
waiting for the register to go to 0, so we need to flip it back.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Fix 6 errors and 20 warnings reported by checkpatch.pl.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Remove almost all existing style issues of type OPEN_BRACE reported
by checkpatch.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Rename the address field to "addr" rather than "reg" so it's easier to
understand what it is.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230508225322.2692066-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Convert all the callers to deal with xe_mmio_*() using struct xe_reg
instead of plain u32. In a few places there was also a rename
s/reg/reg_val/ when dealing with the value returned so it doesn't get
mixed up with the register address.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230508225322.2692066-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Set atomic in xe_mmio_wait32() otherwise we would
be scheduling in atomic context.
Fixes: 7dc9b92dcfef ("drm/xe: Remove i915_utils dependency from xe_pcode.")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On i915 the "see comment about Wa_22013088509" referred to the comment
in the graphics version >= 11 branch, where there were more details
about it. From the platforms supported by xe, only PVC needs
Wa_22013088509, but as the comment says, it's simpler to do it for all
platforms as there is no downside. Bring the missing comment over from
i915 and reword it to fit xe better.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230504073250.1436293-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Stop using i915 types for registers. Use our own types. Differently from
i915, this will keep under the register definition the knowledge for the
different types of registers. For now, the "flags"/"options" are mcr and
masked, although only the former is being used.
Additionally MCR registers have their own type. The only place that
should really look inside a xe_mcr_reg_t is that code dealing with the
steering and using other APIs when the register is MCR has been a source
of problem in the past.
Most of the driver is agnostic to the register differences since they
either use the definition from the header or already call the correct
MCR_REG()/_MMIO() macros. By embeding the struct xe_reg inside the
struct it's also possible to guarantee the compiler will break if
using RANDOM_MCR_REG.reg is attempted, since now the u32 is inside the
inner struct.
v2:
- Deep a dedicated type for MCR registers to avoid misuse
(Matt Roper, Jani)
- Drop the typedef and just use a struct since it's not an opaque type
(Jani)
- Add more kernel-doc
v3:
- Use only 22 bits for the register address since all the platforms
supported so far have only 4MB of MMIO per tile (Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-7-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The defines for the registers were brought over from i915 while
bootstrapping the driver. As xe supports TGL and later only, it doesn't
make sense to keep the GEN* prefixes and suffixes in the registers: TGL
is graphics version 12, previously called "GEN12". So drop the prefix
everywhere.
v2:
- Also drop _TGL suffix and reword commit message as suggested
by Matt Roper. While at it, rename VSUNIT_CLKGATE_DIS_TGL to
VSUNIT_CLKGATE2_DIS with the additional "2", so it doesn't clash
with the define for the other register
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In order to improve readability and make it more future proof,
split the engine type from the graphics/platform checks.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230317223441.3891073-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add a sentence about the initialization so it's clear for newcomers how
to tweak the init functions for new platforms.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Some register ranges with replication type L3BANK were missing from the
driver table. The following warning was triggering when adding a
workaround touching the register 0xb188:
xe 0000:03:00.0: Did not find MCR register 0xb188 in any MCR steering table
Add the L3BANK ranges according to the spec.
v2:
- Fix typo in one of the ranges: s/0x00BCFF/0x008CFF/ (Matt Roper)
- Add termination rule in the init function for L3BANK (Matt Roper)
Bspec: 66534
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Create regs/xe_gt_regs.h file with all the registers and bit
definitions used by the xe driver. Eventually the registers may be
defined in a different way and since xe doesn't supported below gen12,
the number of registers touched is much smaller, so create a new header.
The definitions themselves are direct copy from the
gt/intel_gt_regs.h file, just sorting the registers by address.
Cleaning those up and adhering to a common coding style is left for
later.
v2: Make the change to MCR_REG location in a separate patch to go
through the i915 branch (Matt Roper / Rodrigo)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Sort includes and split them in blocks:
1) .h corresponding to the .c. Example: xe_bb.c should have a "#include
"xe_bb.h" first.
2) #include <linux/...>
3) #include <drm/...>
4) local includes
5) i915 includes
This is accomplished by running
`clang-format --style=file -i --sort-includes drivers/gpu/drm/xe/*.[ch]`
and ignoring all the changes after the includes. There are also some
manual tweaks to split the blocks.
v2: Also sort includes in headers
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
ret is not initialized in mcr_lock() when running in platforms with
graphics IP version < 1270, this could cause drm_WARN_ON_ONCE()
to hit eventually(what just happened to me).
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Like detailed in commit 927dfdd09d8c ("drm/i915/dg2: Add SQIDI
steering"), some registers are expected to have the selector
initialized just once and never set to anything else. For xe, the
registers with SQIDI replication type (SF and MCFG) were missing,
resulting in warnings like:
[ 410.685565] xe 0000:03:00.0: Did not find MCR register 0x8724 in any MCR steering table
While adding these registers, abstract the handling for
"dg2_gam_ranges", moving them together with SF/MCFG to a dedicated
table. This also avoids that range to be checked for platforms other
than DG2. For DG2, this is the new steering output:
# cat /sys/kernel/debug/dri/0/gt0/steering
...
IMPLICIT steering: group=0x0, instance=0x0
0x000b00 - 0x000bff
0x001000 - 0x001fff
0x004000 - 0x004aff
0x008700 - 0x0087ff
0x00c800 - 0x00cfff
0x00f000 - 0x00ffff
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
There is already a BUILD_BUG_ON() check to make sure the size follow the
number of steering types. Also make sure the right index is being used
for each steering type.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add missing "multicast" word and adapt/wrap the rest of the sentence.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Expand xe_mmio_wait32 to accept atomic and then use
that directly when possible, and create own routine to
wait for the pcode status.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
Another clean-up towards killing the usage of i915_utils.h
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
Then, move the i915_utils.h include to its user.
The overall goal is to kill all the usages of the i915_utils
stuff.
Yes, wait_for also depends on <linux/delay.h>, so they go
together to where it is needed. It will be likely needed
anyway directly for udelay or usleep_range.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
