summaryrefslogtreecommitdiff
path: root/drivers/gpu/ipu-v3
AgeCommit message (Collapse)AuthorFilesLines
2023-08-30Merge tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds3-8/+3
Pull drm updates from Dave Airlie: "The drm core grew a new generic gpu virtual address manager, and new execution locking helpers. These are used by nouveau now to provide uAPI support for the userspace Vulkan driver. AMD had a bunch of new IP core support, loads of refactoring around fbdev, but mostly just the usual amount of stuff across the board. core: - fix gfp flags in drmm_kmalloc gpuva: - add new generic GPU VA manager (for nouveau initially) syncobj: - add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl dma-buf: - acquire resv lock for mmap() in exporters - support dma-buf self import automatically - docs fixes backlight: - fix fbdev interactions atomic: - improve logging prime: - remove struct gem_prim_mmap plus driver updates gem: - drm_exec: add locking over multiple GEM objects - fix lockdep checking fbdev: - make fbdev userspace interfaces optional - use linux device instead of fbdev device - use deferred i/o helper macros in various drivers - Make FB core selectable without drivers - Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT - Add helper macros and Kconfig tokens for DMA-allocated framebuffer ttm: - support init_on_free - swapout fixes panel: - panel-edp: Support AUO B116XAB01.4 - Support Visionox R66451 plus DT bindings - ld9040: - Backlight support - magic improved - Kconfig fix - Convert to of_device_get_match_data() - Fix Kconfig dependencies - simple: - Set bpc value to fix warning - Set connector type for AUO T215HVN01 - Support Innolux G156HCE-L01 plus DT bindings - ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings - startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings - sitronix-st7789v: - Support Inanbo T28CP45TN89 plus DT bindings - Support EDT ET028013DMA plus DT bindings - Various cleanups - edp: Add timings for N140HCA-EAC - Allow panels and touchscreens to power sequence together - Fix Innolux G156HCE-L01 LVDS clock bridge: - debugfs for chains support - dw-hdmi: - Improve support for YUV420 bus format - CEC suspend/resume - update EDID on HDMI detect - dw-mipi-dsi: Fix enable/disable of DSI controller - lt9611uxc: Use MODULE_FIRMWARE() - ps8640: Remove broken EDID code - samsung-dsim: Fix command transfer - tc358764: - Handle HS/VS polarity - Use BIT() macro - Various cleanups - adv7511: Fix low refresh rate - anx7625: - Switch to macros instead of hardcoded values - locking fixes - tc358767: fix hardware delays - sitronix-st7789v: - Support panel orientation - Support rotation property - Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings amdgpu: - SDMA 6.1.0 support - HDP 6.1 support - SMUIO 14.0 support - PSP 14.0 support - IH 6.1 support - Lots of checkpatch cleanups - GFX 9.4.3 updates - Add USB PD and IFWI flashing documentation - GPUVM updates - RAS fixes - DRR fixes - FAMS fixes - Virtual display fixes - Soft IH fixes - SMU13 fixes - Rework PSP firmware loading for other IPs - Kernel doc fixes - DCN 3.0.1 fixes - LTTPR fixes - DP MST fixes - DCN 3.1.6 fixes - SMU 13.x fixes - PSP 13.x fixes - SubVP fixes - GC 9.4.3 fixes - Display bandwidth calculation fixes - VCN4 secure submission fixes - Allow building DC on RISC-V - Add visible FB info to bo_print_info - HBR3 fixes - GFX9 MCBP fix - GMC10 vmhub index fix - GMC11 vmhub index fix - Create a new doorbell manager - SR-IOV fixes - initial freesync panel replay support - revert zpos properly until igt regression is fixeed - use TTM to manage doorbell BAR - Expose both current and average power via hwmon if supported amdkfd: - Cleanup CRIU dma-buf handling - Use KIQ to unmap HIQ - GFX 9.4.3 debugger updates - GFX 9.4.2 debugger fixes - Enable cooperative groups fof gfx11 - SVM fixes - Convert older APUs to use dGPU path like newer APUs - Drop IOMMUv2 path as it is no longer used - TBA fix for aldebaran i915: - ICL+ DSI modeset sequence - HDCP improvements - MTL display fixes and cleanups - HSW/BDW PSR1 restored - Init DDI ports in VBT order - General display refactors - Start using plane scale factor for relative data rate - Use shmem for dpt objects - Expose RPS thresholds in sysfs - Apply GuC SLPC min frequency softlimit correctly - Extend Wa_14015795083 to TGL, RKL, DG1 and ADL - Fix a VMA UAF for multi-gt platform - Do not use stolen on MTL due to HW bug - Check HuC and GuC version compatibility on MTL - avoid infinite GPU waits due to premature release of request memory - Fixes and updates for GSC memory allocation - Display SDVO fixes - Take stolen handling out of FBC code - Make i915_coherent_map_type GT-centric - Simplify shmem_create_from_object map_type msm: - SM6125 MDSS support - DPU: SM6125 DPU support - DSI: runtime PM support, burst mode support - DSI PHY: SM6125 support in 14nm DSI PHY driver - GPU: prepare for a7xx - fix a690 firmware - disable relocs on a6xx and newer radeon: - Lots of checkpatch cleanups ast: - improve device-model detection - Represent BMV as virtual connector - Report DP connection status nouveau: - add new exec/bind interface to support Vulkan - document some getparam ioctls - improve VRAM detection - various fixes/cleanups - workraound DPCD issues ivpu: - MMU updates - debugfs support - Support vpu4 virtio: - add sync object support atmel-hlcdc: - Support inverted pixclock polarity etnaviv: - runtime PM cleanups - hang handling fixes exynos: - use fbdev DMA helpers - fix possible NULL ptr dereference komeda: - always attach encoder omapdrm: - use fbdev DMA helpers ingenic: - kconfig regmap fixes loongson: - support display controller mediatek: - Small mtk-dpi cleanups - DisplayPort: support eDP and aux-bus - Fix coverity issues - Fix potential memory leak if vmap() fail mgag200: - minor fixes mxsfb: - support disabling overlay planes panfrost: - fix sync in IRQ handling ssd130x: - Support per-controller default resolution plus DT bindings - Reduce memory-allocation overhead - Improve intermediate buffer size computation - Fix allocation of temporary buffers - Fix pitch computation - Fix shadow plane allocation tegra: - use fbdev DMA helpers - Convert to devm_platform_ioremap_resource() - support bridge/connector - enable PM tidss: - Support TI AM625 plus DT bindings - Implement new connector model plus driver updates vkms: - improve write back support - docs fixes - support gamma LUT zynqmp-dpsub: - misc fixes" * tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits) drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map() drm/tests/drm_kunit_helpers: Place correct function name in the comment header drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly drm/nouveau: uvmm: fix unset region pointer on remap drm/nouveau: sched: avoid job races between entities drm/i915: Fix HPD polling, reenabling the output poll work as needed drm: Add an HPD poll helper to reschedule the poll work drm/i915: Fix TLB-Invalidation seqno store drm/ttm/tests: Fix type conversion in ttm_pool_test drm/msm/a6xx: Bail out early if setting GPU OOB fails drm/msm/a6xx: Move LLC accessors to the common header drm/msm/a6xx: Introduce a6xx_llc_read drm/ttm/tests: Require MMU when testing drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0"" drm/amdgpu: Add memory vendor information drm/amd: flush any delayed gfxoff on suspend entry drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix drm/amdgpu: Remove gfxoff check in GFX v9.4.3 drm/amd/pm: Update pci link speed for smu v13.0.6 ...
2023-08-18drm/i915: Move abs_diff() to math.hAndy Shevchenko1-8/+7
abs_diff() belongs to math.h. Move it there. This will allow others to use it. [andriy.shevchenko@linux.intel.com: add abs_diff() documentation] Link: https://lkml.kernel.org/r/20230804050934.83223-1-andriy.shevchenko@linux.intel.com [akpm@linux-foundation.org: fix comment, per Randy] Link: https://lkml.kernel.org/r/20230803131918.53727-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> # tty/serial Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> # gpu/ipu-v3 Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: Helge Deller <deller@gmx.de> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-28gpu: ipu-v3: prg: Convert to devm_platform_ioremap_resource()Yangtao Li1-4/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20230710032355.72914-8-frank.li@vivo.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-8-frank.li@vivo.com
2023-07-28gpu: ipu-v3: pre: Convert to devm_platform_ioremap_resource()Yangtao Li1-3/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20230710032355.72914-2-frank.li@vivo.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-2-frank.li@vivo.com
2023-07-21drm: Explicitly include correct DT includesRob Herring1-1/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
2023-05-18ipu-v3: Include <linux/io.h>Thomas Zimmermann1-0/+1
The code uses readl() and writel(). Include the header file to get the declarations. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230512102444.5438-4-tzimmermann@suse.de
2023-03-14drm: Drop ARCH_MULTIPLATFORM from dependenciesUwe Kleine-König1-1/+1
Some of these dependencies used to be sensible when only a small part of the platforms supported by ARCH=arm could be compiled together in a single kernel image. Nowadays ARCH_MULTIPLATFORM is only used as a guard for kernel options incompatible with a multiplatform image. See commit 84fc86360623 ("ARM: make ARCH_MULTIPLATFORM user-visible") for some more details. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221209220555.3631364-1-u.kleine-koenig@pengutronix.de
2022-12-16gpu: ipu-v3: common: Add of_node_put() for reference returned by ↵Liang He1-0/+1
of_graph_get_port_by_id() In ipu_add_client_devices(), we need to call of_node_put() for reference returned by of_graph_get_port_by_id() in fail path. Fixes: 17e052175039 ("gpu: ipu-v3: Do not bail out on missing optional port nodes") Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220720152227.1288413-1-windhl@126.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220720152227.1288413-1-windhl@126.com
2022-05-06Merge tag 'imx-drm-next-2022-05-04' of git://git.pengutronix.de/pza/linux ↵Dave Airlie2-8/+6
into drm-next drm/imx: various cleanups - Use swap() instead of open-coding in ipu-image-convert. - Use devm_platform_ioremap_resource() helper in imx-tve. - Make static channel_offsets array const in ipu-dc. - Remove redundant zpos, color encoding and range initialization. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220504144628.3954620-1-p.zabel@pengutronix.de
2022-04-04gpu: ipu-v3: Fix dev_dbg frequency outputLeo Ruan1-2/+3
This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%. But the fixed point math had a flaw and calculated error of 0.2%. Before: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz After: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220207151411.5009-1-mark.jonas@de.bosch.com
2022-04-04drm/imx: make static read-only array channel_offsets constColin Ian King1-2/+3
The static array channel_offsets is read-only so it make sense to make it const. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220123223417.6244-1-colin.i.king@gmail.com
2022-04-04gpu: ipu-v3: image-convert: use swap()Salah Triki1-6/+3
Use swap() instead of implementing it since it makes code cleaner. Signed-off-by: Salah Triki <salah.triki@gmail.com> Link: https://lore.kernel.org/r/20210713140521.GA1873885@pc [p.zabel@pengutronix.de: add "image-convert:" prefix to commit description] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2022-02-17media: v4l2-mediabus: Use structures to describe bus configurationLaurent Pinchart1-3/+3
The media bus configuration is specified through a set of flags, some of which being mutually exclusive. This doesn't scale to express more complex configurations. Improve the API by replacing the single flags field in v4l2_mbus_config by a union of v4l2_mbus_config_* structures. The flags themselves are still used in those structures, so they are kept here. Drivers are however updated to use structure fields instead of flags when already possible. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-10-19media: i.MX6: Support 16-bit BT.1120 video inputKrzysztof Hałasa1-5/+26
Confirmed to work with ADV7610 HDMI receiver. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-08-31Merge tag 'irq-core-2021-08-30' of ↵Linus Torvalds1-7/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates to the interrupt core and driver subsystems: Core changes: - The usual set of small fixes and improvements all over the place, but nothing stands out MSI changes: - Further consolidation of the PCI/MSI interrupt chip code - Make MSI sysfs code independent of PCI/MSI and expose the MSI interrupts of platform devices in the same way as PCI exposes them. Driver changes: - Support for ARM GICv3 EPPI partitions - Treewide conversion to generic_handle_domain_irq() for all chained interrupt controllers - Conversion to bitmap_zalloc() throughout the irq chip drivers - The usual set of small fixes and improvements" * tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) platform-msi: Add ABI to show msi_irqs of platform devices genirq/msi: Move MSI sysfs handling from PCI to MSI core genirq/cpuhotplug: Demote debug printk to KERN_DEBUG irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy irqdomain: Export irq_domain_disconnect_hierarchy() irqchip/gic-v3: Fix priority comparison when non-secure priorities are used irqchip/apple-aic: Fix irq_disable from within irq handlers pinctrl/rockchip: drop the gpio related codes gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type gpio/rockchip: support next version gpio controller gpio/rockchip: use struct rockchip_gpio_regs for gpio controller gpio/rockchip: add driver for rockchip gpio dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank pinctrl/rockchip: add pinctrl device to gpio bank struct pinctrl/rockchip: separate struct rockchip_pin_bank to a head file pinctrl/rockchip: always enable clock for gpio controller genirq: Fix kernel doc indentation EDAC/altera: Convert to generic_handle_domain_irq() powerpc: Bulk conversion to generic_handle_domain_irq() nios2: Bulk conversion to generic_handle_domain_irq() ...
2021-08-16gpu: ipu-v3: Fix i.MX IPU-v3 offset calculations for (semi)planar U/V formatsKrzysztof Hałasa1-15/+15
Video captured in 1400x1050 resolution (bytesperline aka stride = 1408 bytes) is invalid. Fix it. Signed-off-by: Krzysztof Halasa <khalasa@piap.pl> Link: https://lore.kernel.org/r/m3y2bmq7a4.fsf@t19.piap.pl [p.zabel@pengutronix.de: added "gpu: ipu-v3:" prefix to commit description] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-08-12gpu: Bulk conversion to generic_handle_domain_irq()Marc Zyngier1-7/+4
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-05-10gpu: ipu-v3: Add Rec.709 limited range support to DPPhilipp Zabel1-3/+22
Add YCbCr encoding and quantization range parameters to ipu_dp_setup_channel() and configure the CSC DP matrix accordingly. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10drm/imx: Add 8 pixel alignment fixSebastian Reichel2-0/+12
Some standard resolutions like 1366x768 do not work properly with i.MX6 SoCs, since the horizontal resolution needs to be aligned to 8 pixels (so 1360x768 or 1368x768 would work). This patch allocates framebuffers allocated to 8 pixels. The extra time required to send the extra pixels are removed from the blank time. In order to expose the correct display size to userspace, the stride is increased without increasing the width. Without this patch systems with this display resolution hang indefinitely during boot up. Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20210428222953.235280-3-sebastian.reichel@collabora.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-01-04gpu/ipu-v3/ipu-di: Strip out 2 unused 'di_sync_config' entriesLee Jones1-4/+0
They're taking up too much space on the stack. Fixes the following W=1 kernel build warning(s): drivers/gpu/ipu-v3/ipu-di.c: In function ‘ipu_di_sync_config_noninterlaced’: drivers/gpu/ipu-v3/ipu-di.c:391:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-10-26gpu: ipu-v3: remove unused functionsPhilipp Zabel1-67/+0
ipu_mbus_code_to_colorspace, ipu_stride_to_bytes, and ipu_pixelformat_is_planar are unused. Remove them. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-20gpu: ipu-v3: image-convert: Wait for all EOFs before completing a tileSteve Longerbeam1-27/+82
Use a bit-mask of EOF irqs to determine when all required idmac channel EOFs have been received for a tile conversion, and only do tile completion processing after all EOFs have been received. Otherwise it was found that a conversion would stall after the completion of a tile and the start of the next tile, because the input/read idmac channel had not completed and entered idle state, thus locking up the channel when attempting to re-start it for the next tile. Fixes: 0537db801bb01 ("gpu: ipu-v3: image-convert: reconfigure IC per tile") Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20gpu: ipu-v3: image-convert: Combine rotate/no-rotate irq handlersSteve Longerbeam1-38/+20
Combine the rotate_irq() and norotate_irq() handlers into a single eof_irq() handler. Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20gpu: ipu-v3: Restore RGB32, BGR32Steve Longerbeam1-0/+2
RGB32 and BGR32 formats were inadvertently removed from the switch statement in ipu_pixelformat_to_colorspace(). Restore them. Fixes: a59957172b0c ("gpu: ipu-v3: enable remaining 32-bit RGB V4L2 pixel formats") Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-19gpu: ipu-v3: image-convert: only sample into the next tile if necessaryPhilipp Zabel1-2/+2
The first pixel of the next tile is only sampled by the hardware if the fractional input position corresponding to the last written output pixel is not an integer position. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-19gpu: ipu-v3: image-convert: move tile burst alignment out of loopPhilipp Zabel1-39/+45
Burst aligned input and output width can be calculated once per column, instead of repeatedly for each tile in the column. The same goes for input and output height per row. Also don't round up the same values repeatedly. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-19gpu: ipu-v3: image-convert: bail on invalid tile sizesPhilipp Zabel1-3/+24
If we managed to create tiles sized 0x0 because of a bug in the seam calculation, return with an error message instead of letting the driver run into a division by zero later. Also check for tile sizes that are larger than supported by the hardware. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-19gpu: ipu-v3: image-convert: fix image downsize coefficients and tiling ↵Philipp Zabel1-18/+31
calculation This patch effectively reverts commit 912bbf7e9ca4 ("gpu: ipu-v3: image-convert: Fix image downsize coefficients") and replaces it with a different solution based on the preceding patches. The previous fix tried to solve the problem of intermediate tile size between IC downsizing and main processing sections not being limited to 1024 pixels by downsizing the input image to a smaller intermediate size in the downsizing box filter. This causes unnecessary blurring, especially for scaling factors close to 1. Now that the seam position calculation makes sure that the 1024 pixel intermediate tile size limit is not exceeded, calculate the number of tiles from the maximum of intermediate size and output size and avoid unnecessary downsizing. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-19gpu: ipu-v3: image-convert: limit input seam position to hardware requirementsPhilipp Zabel1-6/+24
Limit the input seam position to an interval that guarantees the tile size does not exceed 1024 pixels after the IC downsizing section and that space is left for the next tile. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-19gpu: ipu-v3: image-convert: fix output seam valid intervalPhilipp Zabel1-2/+2
This fixes a failure to determine any seam if the output size is exactly 1024 multiplied by the number of tiles in a given direction. In that case an empty interval out_start == out_end is being passed to find_best_seam, which looks for a seam out_start <= x < out_end. Also reduce the interval for all but the left column / top row, to avoid returning position 0 as best fit. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-19gpu: ipu-v3: image-convert: move output seam valid interval calculation into ↵Philipp Zabel1-22/+12
find_best_seam This reduces code duplication and allows to apply the following modifications in a single place. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-19gpu: ipu-v3: image-convert: enable V4L2_PIX_FMT_BGRX32 and _RGBX32Philipp Zabel1-0/+6
Enable image converter support for V4L2_PIX_FMT_BGRX32 and V4L2_PIX_FMT_RGBX32 pixel formats. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-19gpu: ipu-v3: enable remaining 32-bit RGB V4L2 pixel formatsPhilipp Zabel2-7/+35
Support is already implemented for the corresponding DRM formats, just hook up the remaining V4L2 pixel formats. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
2019-07-16Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds4-106/+482
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
2019-06-14gpu: ipu-v3: image-convert: Enable double write reductionSteve Longerbeam1-0/+9
For the write channels with 4:2:0 subsampled YUV formats, avoid chroma overdraw by only writing chroma for even lines (skip odd chroma rows). This reduces necessary write memory bandwidth by at least 25% (more with rotation enabled). Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-14gpu: ipu-v3: ipu-ic-csc: Add support for Rec.709 encodingSteve Longerbeam1-5/+134
Add support for Rec.709 encoding and inverse encoding. Reported-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-14gpu: ipu-v3: ipu-ic-csc: Add support for limited range encodingSteve Longerbeam1-14/+166
Add support for encodings to or from limited range quantization. Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-14gpu: ipu-v3: ipu-ic: Fully describe colorspace conversionsSteve Longerbeam4-106/+192
Only providing the input and output RGB/YUV space to the IC task init functions is not sufficient. To fully characterize a colorspace conversion, the Y'CbCr encoding standard, and quantization also need to be specified. Define a 'struct ipu_ic_colorspace' that includes all the above. This allows to actually enforce the fact that the IC: - can only encode to/from YUV and RGB full range. A follow-up patch will remove this restriction. - can only encode using BT.601 standard. A follow-up patch will add Rec.709 encoding support. The determination of the CSC coefficients based on the input/output 'struct ipu_ic_colorspace' are moved to a new exported function ipu_ic_calc_csc(), and 'struct ic_csc_params' is exported as 'struct ipu_ic_csc_params'. ipu_ic_calc_csc() fills a 'struct ipu_ic_csc' with the input/output 'struct ipu_ic_colorspace' and the calculated 'struct ic_csc_params' from those input/output colorspaces. The functions ipu_ic_task_init(_rsc)() now take a filled 'struct ipu_ic_csc'. The existing CSC coefficient tables and ipu_ic_calc_csc() are moved to a new module ipu-ic-csc.c. This is in preparation for adding more coefficient tables for limited range quantization and more encoding standards. The existing ycbcr2rgb and inverse rgb2ycbcr tables defined the BT.601 Y'CbCr encoding coefficients. The rgb2ycbcr table specifically described the BT.601 encoding from full range RGB to full range YUV. Table comments have been added in ipu-ic-csc.c to make this more clear. The ycbcr2rgb inverse table described encoding YUV limited range to RGB full range. To be consistent with the rgb2ycbcr table, this table is converted to YUV full range to RGB full range, and the comments are expanded in ipu-ic-csc.c. The ic_csc_rgb2rgb table was just an identity matrix, so it is renamed 'identity' in ipu-ic-csc.c. Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> [p.zabel@pengutronix.de: removed a superfluous blank line] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-14gpu: ipu-v3: ipu-ic: Fix saturation bit offset in TPMEMSteve Longerbeam1-1/+1
The saturation bit was being set at bit 9 in the second 32-bit word of the TPMEM CSC. This isn't correct, the saturation bit is bit 42, which is bit 10 of the second word. Fixes: 1aa8ea0d2bd5d ("gpu: ipu-v3: Add Image Converter unit") Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-14gpu: ipu-v3: image-convert: Fix image downsize coefficientsSteve Longerbeam1-2/+4
The output of the IC downsizer unit in both dimensions must be <= 1024 before being passed to the IC resizer unit. This was causing corrupted images when: input_dim > 1024, and input_dim / 2 < output_dim < input_dim Some broken examples were 1920x1080 -> 1024x768 and 1920x1080 -> 1280x1080. Fixes: 70b9b6b3bcb21 ("gpu: ipu-v3: image-convert: calculate per-tile resize coefficients") Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-14gpu: ipu-v3: image-convert: Fix input bytesperline for packed formatsSteve Longerbeam1-1/+3
The input bytesperline calculation for packed pixel formats was incorrect. The min/max clamping values must be multiplied by the packed bits-per-pixel. This was causing corrupted converted images when the input format was RGB4 (probably also other input packed formats). Fixes: d966e23d61a2c ("gpu: ipu-v3: image-convert: fix bytesperline adjustment") Reported-by: Harsha Manjula Mallikarjun <Harsha.ManjulaMallikarjun@in.bosch.com> Suggested-by: Harsha Manjula Mallikarjun <Harsha.ManjulaMallikarjun@in.bosch.com> Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-14gpu: ipu-v3: image-convert: Fix input bytesperline width/height alignSteve Longerbeam1-11/+21
The output width and height alignment values were being used in the input bytesperline calculation. Fix by separating local vars w_align and h_align into w_align_in, h_align_in, w_align_out, and h_align_out. Fixes: d966e23d61a2c ("gpu: ipu-v3: image-convert: fix bytesperline adjustment") Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner2-18/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 159Thomas Gleixner3-21/+3
Based on 1 normalized pattern(s): the code contained herein is licensed under the gnu general public license you may obtain a copy of the gnu general public license version 2 or later at the following locations http www opensource org licenses gpl license html http www gnu org copyleft gpl html extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.383790741@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner9-90/+9
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-23gpu: ipu-v3: dp: fix CSC handlingLucas Stach1-3/+9
Initialize the flow input colorspaces to unknown and reset to that value when the channel gets disabled. This avoids the state getting mixed up with a previous mode. Also keep the CSC settings for the background flow intact when disabling the foreground flow. Root-caused-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-03-10Merge tag 'media/v5.1-1' of ↵Linus Torvalds2-43/+109
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - remove sensor drivers that got converted from soc_camera - remaining soc_camera drivers got moved to staging - some documentation cleanups and improvements - the imx staging driver now supports imx7 - the ov9640, mt9m001 and mt9m111 got converted from soc_camera - the vim2m driver now does what a m2m convert driver expects to do - epoll() fixes on media subsystems - several drivers fixes, typos, cleanups and improvements * tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (346 commits) media: dvb/earth-pt1: fix wrong initialization for demod blocks media: vim2m: Address some coding style issues media: vim2m: don't use BUG() media: vim2m: speedup passthrough copy media: vim2m: add an horizontal scaler media: vim2m: don't accept YUYV anymore as output format media: vim2m: add vertical linear scaler media: vim2m: better handle cap/out buffers with different sizes media: vim2m: use different framesizes for bayer formats media: vim2m: add support for VIDIOC_ENUM_FRAMESIZES media: vim2m: ensure that width is multiple of two media: vim2m: improve debug messages media: vim2m: add bayer capture formats media: a few more typos at staging, pci, platform, radio and usb media: Documentation: fix several typos media: staging: fix several typos media: include: fix several typos media: common: fix several typos media: v4l2-core: fix several typos media: usb: fix several typos ...
2019-02-22gpu: ipu-v3: prg: add function to get channel configure statusLucas Stach1-0/+16
This allows channels using the PRG to check if a requested configuration update has been applied or is still pending. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> [p.zabel@pengutronix.de: inverted logic: done -> pending] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-17 14:24:50 +0300