summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)AuthorFilesLines
2020-04-02Merge branch 'for-linus' of ↵Linus Torvalds12-18/+871
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - Logitech HID++ protocol support improvement from Filipe Laíns - probe fix for Logitech-G* devices from Hans de Goede - a few other small code cleanups and support for new device IDs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: rmi: Simplify an error handling path in 'rmi_hid_read_block()' HID: intel-ish-hid: hbm.h: Replace zero-length array with flexible-array member HID: intel-ish-hid: ishtp-dev.h: Replace zero-length array with flexible-array member HID: Add driver fixing Glorious PC Gaming Race mouse report descriptor HID: lg-g15: Do not fail the probe when we fail to disable F# emulation HID: appleir: Use devm_kzalloc() instead of kzalloc() HID: appleir: Remove unnecessary goto label HID: logitech-dj: add support for the static device in the Powerplay mat/receiver HID: mcp2221: add usb to i2c-smbus host bridge HID: logitech-dj: add debug msg when exporting a HID++ report descriptors HID: quirks: Remove ITE 8595 entry from hid_have_special_driver
2020-04-02Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "My attempt to revitalize trivial queue I've been neglecting for years (what a disaster that was for this world, right? :) ) with patches collected from backlog that were still relevant and not applied elsewhere in the meantime" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: err.h: remove deprecated PTR_RET for good blk-mq: Fix typo in comment x86/boot: Fix comment spelling sh: mach-highlander: Fix comment spelling s390/dasd: Fix comment spelling mfd: wm8994: Fix comment spelling docs: Add reference in binfmt-misc.rst genirq: fix kerneldoc comment for irq_desc drm/amdgpu: fix two documentation mismatch issues HID: fix Kconfig word ordering list/hashtable: minor documentation corrections.
2020-04-01Merge branch 'for-5.7/mcp2221' into for-linusJiri Kosina4-0/+754
2020-04-01Merge branch 'for-5.7/logitech' into for-linusJiri Kosina1-2/+9
- Logitech HID++ protocol support improvement from Filipe Laíns
2020-04-01Merge branch 'for-5.7/ish' into for-linusJiri Kosina2-2/+2
- C99 code purification in intel-ish-hid from Gustavo A. R. Silva
2020-04-01Merge branch 'for-5.7/glorious' into for-linusJiri Kosina5-4/+100
- report descriptor fix for Glorious PC Gaming Race device from Samuel Čavoj
2020-04-01Merge branch 'for-5.7/core' into for-linusJiri Kosina1-3/+0
- device-specific (ITE 8595) fix from Hans de Goede
2020-04-01Merge branch 'for-5.7/appleir' into for-linusJiri Kosina2-10/+5
- small code cleanups in hid-appleir from Lucas Tanure
2020-03-23HID: rmi: Simplify an error handling path in 'rmi_hid_read_block()'Christophe JAILLET1-1/+0
The 'RMI_READ_REQUEST_PENDING' bit is already cleared in the error handling path. There is no need to reset it twice. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-21HID: intel-ish-hid: hbm.h: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-21HID: intel-ish-hid: ishtp-dev.h: Replace zero-length array with ↵Gustavo A. R. Silva1-1/+1
flexible-array member The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-18HID: Add driver fixing Glorious PC Gaming Race mouse report descriptorSamuel Čavoj4-0/+98
The Glorious Model O mice (and also at least the Model O-, which is driver-wise the same mouse) have a bug in the descriptor of HID Report with ID 2. This report is used for Consumer Control buttons, which can be mapped using the provided Windows only software. Here is an excerpt from the original descriptor: INPUT(2)[INPUT] Field(0) Flags( Constant Variable Absolute ) Field(1) Flags( Constant Variable Absolute ) Field(2) Flags( Constant Variable Absolute ) The issue is the Constant flag specified on all 3 fields, which causes the hid driver to ignore changes in these fields and essentialy causes the buttons to not work at all. The submitted driver patches the descriptor to end up with the following: INPUT(2)[INPUT] Field(0) Flags( Variable Relative ) Field(1) Flags( Variable Relative ) Field(2) Flags( Variable Relative ) The Constant bit is reset and the Relative bit has been set in order to prevent repeat events when holding down the button. Additionally, the device name is changed from the hardware-reported "SINOWEALTH Wired Gaming Mouse" to "Glorious Model O" or "Glorious Model D". Signed-off-by: Samuel Čavoj <sammko@sammserver.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-17HID: lg-g15: Do not fail the probe when we fail to disable F# emulationHans de Goede1-2/+4
By default the G1-G12 keys on the Logitech gaming keyboards send F1 - F12 when in "generic HID" mode. The first thing the hid-lg-g15 driver does is disable this behavior. We have received a bugreport that this does not work when the keyboard is connected through an Aten KVM switch. Using a gaming keyboard with a KVM is a bit weird setup, but still we can try to fail a bit more gracefully here. On the G510 keyboards the same USB-interface which is used for the gaming keys is also used for the media-keys. Before this commit we would call hid_hw_stop() on failure to disable the F# emulation and then exit the probe method with an error code. This not only causes us to not handle the gaming-keys, but this also breaks the media keys which is a regression compared to the situation when these keyboards where handled by the generic hidinput driver. This commit changes the error handling to clear the hiddev drvdata (to disable our .raw_event handler) and then returning from the probe method with success. The net result of this is that, when connected through a KVM, things work as well as they did before the hid-lg-g15 driver was introduced. Fixes: ad4203f5a243 ("HID: lg-g15: Add support for the G510 keyboards' gaming keys") BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1806321 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-17HID: fix Kconfig word orderingGeert Uytterhoeven1-1/+1
Fix a silly word ordering typo. Fixes: 42337b9d4d958daa ("HID: add driver for U2F Zero built-in LED and RNG") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-17Merge branch 'for-linus' of ↵Linus Torvalds5-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - string buffer formatting fixes in picolcd and sensor drivers, from Takashi Iwai - two new device IDs from Chen-Tsung Hsieh and Tony Fischetti * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: add ALWAYS_POLL quirk to lenovo pixart mouse HID: google: add moonball USB id HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflow HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflow
2020-03-17HID: add ALWAYS_POLL quirk to lenovo pixart mouseTony Fischetti2-0/+2
A lenovo pixart mouse (17ef:608d) is afflicted common the the malfunction where it disconnects and reconnects every minute--each time incrementing the device number. This patch adds the device id of the device and specifies that it needs the HID_QUIRK_ALWAYS_POLL quirk in order to work properly. Signed-off-by: Tony Fischetti <tony.fischetti@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-16HID: google: add moonball USB idChen-Tsung Hsieh2-0/+3
Add 1 additional hammer-like device. Signed-off-by: Chen-Tsung Hsieh <chentsung@chromium.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-13HID: appleir: Use devm_kzalloc() instead of kzalloc()Lucas Tanure1-3/+2
Signed-off-by: Lucas Tanure <tanure@linux.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-13HID: appleir: Remove unnecessary goto labelLucas Tanure1-5/+2
Signed-off-by: Lucas Tanure <tanure@linux.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-11HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-3/+3
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-11HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-2/+2
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-10HID: logitech-dj: add support for the static device in the Powerplay ↵Filipe Laíns1-2/+7
mat/receiver The Logitech G Powerplay has a lightspeed receiver with a static HID++ device with ID 7 attached to it to. It is used to configure the led on the mat. For this reason I increased the max number of devices. Signed-off-by: Filipe Laíns <lains@archlinux.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-10HID: mcp2221: add usb to i2c-smbus host bridgeRishi Gupta4-0/+754
MCP2221 is a USB HID to I2C/SMbus host bridge device. This commit implements i2c and smbus host adapter support. 7-bit address and i2c multi-message transaction is also supported. Signed-off-by: Rishi Gupta <gupt21@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-05HID: hyperv: NULL check before some freeing functions is not needed.Lucas Tanure1-4/+2
Fix below warnings reported by coccicheck: drivers/hid/hid-hyperv.c:197:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/hid/hid-hyperv.c:211:2-7: WARNING: NULL check before some freeing functions is not needed. Signed-off-by: Lucas Tanure <tanure@linux.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-02-27Merge branch 'for-linus' of ↵Linus Torvalds8-35/+63
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID subsystem fixes from Jiri Kosina: - syzkaller-reported error handling fixes in various drivers, from various people - increase of HID report buffer size to 8K, which is apparently needed by certain modern devices - a few new device-ID-specific fixes / quirks - battery charging status reporting fix in logitech-hidpp, from Filipe Laíns * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: hid-bigbenff: fix race condition for scheduled work during removal HID: hid-bigbenff: call hid_hw_stop() in case of error HID: hid-bigbenff: fix general protection fault caused by double kfree HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override HID: alps: Fix an error handling path in 'alps_input_configured()' HID: hiddev: Fix race in in hiddev_disconnect() HID: core: increase HID report buffer size to 8KiB HID: core: fix off-by-one memset in hid_report_raw_event() HID: apple: Add support for recent firmware on Magic Keyboards HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is active
2020-02-18HID: hid-bigbenff: fix race condition for scheduled work during removalHanno Zulla1-0/+6
It's possible that there is scheduled work left while the device is already being removed, which can cause a kernel crash. Adding a flag will avoid this. Signed-off-by: Hanno Zulla <kontakt@hanno.de> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-02-18HID: hid-bigbenff: call hid_hw_stop() in case of errorHanno Zulla1-5/+10
It's required to call hid_hw_stop() once hid_hw_start() was called previously, so error cases need to handle this. Also, hid_hw_close() is not necessary during removal. Signed-off-by: Hanno Zulla <kontakt@hanno.de> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-02-18HID: hid-bigbenff: fix general protection fault caused by double kfreeHanno Zulla1-2/+8
The struct *bigben was allocated via devm_kzalloc() and then used as a parameter in input_ff_create_memless(). This caused a double kfree during removal of the device, since both the managed resource API and ml_ff_destroy() in drivers/input/ff-memless.c would call kfree() on it. Signed-off-by: Hanno Zulla <kontakt@hanno.de> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-02-14HID: i2c-hid: add Trekstor Surfbook E11B to descriptor overrideKai-Heng Feng1-0/+8
The Surfbook E11B uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. BugLink: https://bugs.launchpad.net/bugs/1858299 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-02-12HID: alps: Fix an error handling path in 'alps_input_configured()'Christophe JAILLET1-1/+1
They are issues: - if 'input_allocate_device()' fails and return NULL, there is no need to free anything and 'input_free_device()' call is a no-op. It can be axed. - 'ret' is known to be 0 at this point, so we must set it to a meaningful value before returning Fixes: 2562756dde55 ("HID: add Alps I2C HID Touchpad-Stick support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-02-12HID: hiddev: Fix race in in hiddev_disconnect()dan.carpenter@oracle.com1-1/+1
Syzbot reports that "hiddev" is used after it's free in hiddev_disconnect(). The hiddev_disconnect() function sets "hiddev->exist = 0;" so hiddev_release() can free it as soon as we drop the "existancelock" lock. This patch moves the mutex_unlock(&hiddev->existancelock) until after we have finished using it. Reported-by: syzbot+784ccb935f9900cc7c9e@syzkaller.appspotmail.com Fixes: 7f77897ef2b6 ("HID: hiddev: fix potential use-after-free") Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-02-12HID: logitech-dj: add debug msg when exporting a HID++ report descriptorsFilipe Laíns1-0/+2
When exporting all other types of report descriptors we print a debug message. Not doing so for HID++ descriptors makes unaware users think that no HID++ descriptor was exported. Signed-off-by: Filipe Laíns <lains@archlinux.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-02-12HID: quirks: Remove ITE 8595 entry from hid_have_special_driverHans de Goede1-3/+0
The ITE 8595 chip used in various 2-in-1 keyboard docks works fine with the hid-generic driver (minus the RF_KILL key) and also keeps working fine when swapping drivers, so there is no need to have it in the hid_have_special_driver list. Note the other 2 USB ids in hid-ite.c were never added to hid_have_special_driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-02-12HID: core: fix off-by-one memset in hid_report_raw_event()Johan Korsnes1-1/+3
In case a report is greater than HID_MAX_BUFFER_SIZE, it is truncated, but the report-number byte is not correctly handled. This results in a off-by-one in the following memset, causing a kernel Oops and ensuing system crash. Note: With commit 8ec321e96e05 ("HID: Fix slab-out-of-bounds read in hid_field_extract") I no longer hit the kernel Oops as we instead fail "controlled" at probe if there is a report too long in the HID report-descriptor. hid_report_raw_event() is an exported symbol, so presumabely we cannot always rely on this being the case. Fixes: 966922f26c7f ("HID: fix a crash in hid_report_raw_event() function.") Signed-off-by: Johan Korsnes <jkorsnes@cisco.com> Cc: Armando Visconti <armando.visconti@st.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-02-12HID: apple: Add support for recent firmware on Magic KeyboardsMansour Behabadi1-1/+2
Magic Keyboards with more recent firmware (0x0100) report Fn key differently. Without this patch, Fn key may not behave as expected and may not be configurable via hid_apple fnmode module parameter. Signed-off-by: Mansour Behabadi <mansour@oxplot.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-02-03HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dockHans de Goede1-2/+3
Commit 8f18eca9ebc5 ("HID: ite: Add USB id match for Acer SW5-012 keyboard dock") added the USB id for the Acer SW5-012's keyboard dock to the hid-ite driver to fix the rfkill driver not working. Most keyboard docks with an ITE 8595 keyboard/touchpad controller have the "Wireless Radio Control" bits which need the special hid-ite driver on the second USB interface (the mouse interface) and their touchpad only supports mouse emulation, so using generic hid-input handling for anything but the "Wireless Radio Control" bits is fine. On these devices we simply bind to all USB interfaces. But unlike other ITE8595 using keyboard docks, the Acer Aspire Switch 10 (SW5-012)'s touchpad not only does mouse emulation it also supports HID-multitouch and all the keys including the "Wireless Radio Control" bits have been moved to the first USB interface (the keyboard intf). So we need hid-ite to handle the first (keyboard) USB interface and have it NOT bind to the second (mouse) USB interface so that that can be handled by hid-multitouch.c and we get proper multi-touch support. This commit changes the hid_device_id for the SW5-012 keyboard dock to only match on hid devices from the HID_GROUP_GENERIC group, this way hid-ite will not bind the the mouse/multi-touch interface which has HID_GROUP_MULTITOUCH_WIN_8 as group. This fixes the regression to mouse-emulation mode introduced by adding the keyboard dock USB id. Cc: stable@vger.kernel.org Fixes: 8f18eca9ebc5 ("HID: ite: Add USB id match for Acer SW5-012 keyboard dock") Reported-by: Zdeněk Rampas <zdenda.rampas@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-01-30Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-2/+1
Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...
2020-01-28HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is ↵Filipe Laíns1-22/+21
active In the HID++ 2.0 function getBatteryInfo() from the BatteryVoltage (0x1001) feature, chargeStatus is only valid if extPower is active. Previously we were ignoring extPower, which resulted in wrong values. Example: With an unplugged mouse $ cat /sys/class/power_supply/hidpp_battery_0/status Charging This patch fixes that, it also renames charge_sts to flags as charge_sts can be confused with chargeStatus from the spec. Spec: +--------+-------------------------------------------------------------------------+ | byte | 2 | +--------+--------------+------------+------------+----------+----------+----------+ | bit | 0..2 | 3 | 4 | 5 | 6 | 7 | +--------+--------------+------------+------------+----------+----------+----------+ | buffer | chargeStatus | fastCharge | slowCharge | critical | (unused) | extPower | +--------+--------------+------------+------------+----------+----------+----------+ Table 1 - battery voltage (0x1001), getBatteryInfo() (ASE 0), 3rd byte +-------+--------------------------------------+ | value | meaning | +-------+--------------------------------------+ | 0 | Charging | +-------+--------------------------------------+ | 1 | End of charge (100% charged) | +-------+--------------------------------------+ | 2 | Charge stopped (any "normal" reason) | +-------+--------------------------------------+ | 7 | Hardware error | +-------+--------------------------------------+ Table 2 - chargeStatus value Signed-off-by: Filipe Laíns <lains@archlinux.org> Tested-by: Pedro Vanzella <pedro@pedrovanzella.com> Reviewed-by: Pedro Vanzella <pedro@pedrovanzella.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-01-27Merge branch 'for-5.6/logitech' into for-linusJiri Kosina1-15/+232
- voltage support for newer Logitech HID++ devices, from Pedro Vanzella. - MX Master support improvements, from Adrian Freund and Mazin Rezk
2020-01-27Merge branch 'for-5.6/hidraw' into for-linusJiri Kosina1-0/+9
- support for uniq ioctl()
2020-01-20Backmerge v5.5-rc7 into drm-nextDave Airlie15-71/+105
msm needs 5.5-rc4, go to the latest. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-13HID: logitech-hidpp: avoid duplicate error handling code in 'hidpp_probe()'Christophe JAILLET1-1/+0
'hid_hw_stop()' is already in the error handling path when branching to the 'hid_hw_open_fail' label. There is no point in calling it twice, so remove one. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-01-10HID: hidraw, uhid: Always report EPOLLOUTJiri Kosina2-5/+7
hidraw and uhid device nodes are always available for writing so we should always report EPOLLOUT and EPOLLWRNORM bits, not only in the cases when there is nothing to read. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: be54e7461ffdc ("HID: uhid: Fix returning EPOLLOUT from uhid_char_poll") Fixes: 9f3b61dc1dd7b ("HID: hidraw: Fix returning EPOLLOUT from hidraw_poll") Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-01-09HID: steam: Fix input device disappearingRodrigo Rivas Costa1-0/+4
The `connected` value for wired devices was not properly initialized, it must be set to `true` upon creation, because wired devices do not generate connection events. When a raw client (the Steam Client) uses the device, the input device is destroyed. Then, when the raw client finishes, it must be recreated. But since the `connected` variable was false this never happended. Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-29HID: intel-ish-hid: ipc: Add Tiger Lake PCI device IDSrinivas Pandruvada2-0/+2
Added Tiger Lake PCI device ID to the supported device list. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-19drivers/hid/hid-multitouch.c: fix a possible null pointer access.Pan Zhang1-1/+1
1002 if ((quirks & MT_QUIRK_IGNORE_DUPLICATES) && mt) { 1003 struct input_mt_slot *i_slot = &mt->slots[slotnum]; 1004 1005 if (input_mt_is_active(i_slot) && 1006 input_mt_is_used(mt, i_slot)) 1007 return -EAGAIN; 1008 } We previously assumed 'mt' could be null (see line 1002). The following situation is similar, so add a judgement. Signed-off-by: Pan Zhang <zhangpan26@huawei.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-12-18hid-logitech-hidpp: read battery voltage from newer devicesPedro Vanzella1-4/+168
Newer Logitech mice report their battery voltage through feature 0x1001 instead of the battery levels through feature 0x1000. When the device is brought up and we try to query the battery, figure out if it supports the old or the new feature. If it supports the new feature, record the feature index and read the battery voltage and its charge status. The device will respond with three bytes: the first two are its voltage, and the last one is a bitset, reporting if the battery is charging, fast or slow, in critical level or discharging. If everything went correctly, record the fact that we're capable of querying battery voltage. Note that the protocol only gives us the current voltage in mV. We store that as-is, but when queried, we report it in uV as expected by sysfs. Like we do for other ways of interacting with the battery for other devices, refresh the battery status and notify the power supply subsystem of the changes in voltage and status. Since there are no known devices which implement both the old and the new battery feature, we make sure to try the newer feature first and only fall back to the old one if that fails. Signed-off-by: Pedro Vanzella <pedro@pedrovanzella.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-12-18HID: logitech: Add MX Master 3 MouseAdrian Freund1-0/+5
This patch adds support for the Logitech MX Master 3 Mouse using the Logitech Unifying Receiver and Bluetooth LE. Signed-off-by: Adrian Freund <adrian@freund.io> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-12-18HID: logitech-hidpp: Support WirelessDeviceStatus connect eventsMazin Rezk1-4/+35
This patch allows hidpp_report_is_connect_event to support WirelessDeviceStatus connect events. The WirelessDeviceStatus feature index is stored in hidpp_device when probed. The connect event's fap feature_index is compared against it if the device supports it. Signed-off-by: Mazin Rezk <mnrzk@protonmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-12-18HID: logitech-hidpp: Support translations from short to long reportsMazin Rezk1-6/+24
This patch allows short reports to be translated into long reports. hidpp_validate_device now returns a u8 instead of a bool which represents the supported reports. The corresponding bits (i.e. HIDPP_REPORT_*_SUPPORTED) are set if an HID++ report is supported. If a short report is being sent and the device does not support it, it is instead sent as a long report. This patch also introduces support for the MX Master (b01e and b012). Signed-off-by: Mazin Rezk <mnrzk@protonmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>