summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses/i2c-sh_mobile.c
AgeCommit message (Collapse)AuthorFilesLines
2024-05-06i2c: sh_mobile: remove printout on handled timeoutsWolfram Sang1-1/+0
I2C and SMBus timeouts are not something the user needs to be informed about on controller level. The client driver may know if that really is a problem and give more detailed information to the user. The controller should just pass this information upwards. Remove the printout. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-02-08i2c: sh_mobile: Switch R-Mobile A1/APE6 and SH-Mobile AG5 to new frequency ↵Geert Uytterhoeven1-16/+11
calculation Switch the R-Mobile A1, R-Mobile APE6, and SH-Mobile AG5 SoCs to the new frequency calculation formula, to (a) avoid running the I2C bus too fast, and (b) bring the low/high ratio closer to the recommended ratio 5/4. As this makes fast_clock_dt_config and v2_freq_calc_dt_config identical, merge them into a single fast_clock_dt_config. Legacy SH users (sh7343, sh7366, and sh772[234]) are left alone, and still use the old formula. Measurement results on R-Mobile APE6 and SH-Mobile AG5 (fck=104 MHz, clks_per_count=2): 100 kHz: 106 kHz LH=1.12 before, 99.6 kHz L/H=1.22 after 400 kHz: 384 kHz LH=1.67 before, 392 kHz L/H=1.27 after Measurement results on R-Mobile A1 (fck=49.5 MHz, clks_per_count=1): 100 kHz: 106 kHz L/H=1.09 before, 99.6 kHz L/H=1.20 after Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2023-08-14i2c: sh_mobile: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-6/+2
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-14I2C: Explicitly include correct DT includesRob Herring1-1/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-08i2c: sh-mobile: Remove #ifdef guards for PM related functionsPaul Cercueil1-9/+3
Use the new PM macros for the suspend and resume functions to be automatically dropped by the compiler when CONFIG_PM or CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards. This has the advantage of always compiling these functions in, independently of any Kconfig option. Thanks to that, bugs and other regressions are subsequently easier to catch. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230722115310.27681-4-paul@crapouillou.net Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2023-06-05i2c: Convert to platform remove callback returning voidUwe Kleine-König1-3/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Alain Volmat <alain.volmat@foss.st.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Jochen Friedrich <jochen@scram.de> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Asmaa Mnebhi <asnaa@nvidia.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Chris Pringle <chris.pringle@phabrix.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Tali Perry <tali.perry@nuvoton.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-12i2c: move drivers from strlcpy to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy'. Conversion is easy because no driver used the return value and has been done with a simple sed invocation. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-01-11i2c: sh_mobile: remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./drivers/i2c/busses/i2c-sh_mobile.c:849:3-4: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-01-03i2c: sh_mobile: Use platform_get_irq_optional() to get the interruptLad Prabhakar1-8/+26
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_optional() for DT users only. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-12-17i2c: sh_mobile: update to new DMAENGINE API when terminatingWolfram Sang1-17/+9
dmaengine_terminate_all() is deprecated. When converting the existing calls, it turned out that the termination in the DMA setup and callback were superfluous and only a side effect of simply calling rcar_i2c_cleanup_dma(). As either no DMA transfers have been submitted yet or the last one has successfully completed, there is nothing to terminate and we can leave it out. So, merge the DMA unmap and cleanup function to save some code. Then, add a flag if the new cleanup function needs to terminate DMA. This is only the case for the erorr handling in the main thread, so we can finally switch from dmaengine_terminate_all() to dmaengine_terminate_sync() here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-11i2c: sh_mobile: : use proper DMAENGINE API for terminationWolfram Sang1-2/+2
dmaengine_terminate_all() is deprecated in favor of explicitly saying if it should be sync or async. Here, we want dmaengine_terminate_sync() because there is no other synchronization code in the driver to handle an async case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-25i2c: sh_mobile: Use new clock calculation formulas for RZ/G2EGeert Uytterhoeven1-1/+1
When switching the Gen3 SoCs to the new clock calculation formulas, the match entry for RZ/G2E added in commit 51243b73455f2d12 ("i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E)") was forgotten. Fixes: e8a27567509b2439 ("i2c: sh_mobile: use new clock calculation formulas for Gen3") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-09i2c: sh_mobile: Mark adapter suspended during suspendGeert Uytterhoeven1-0/+28
When a driver tries to send an I2C message while the adapter is suspended, this typically fails with: i2c-sh_mobile e60b0000.i2c: Transfer request timed out Avoid accessing the adapter while it is suspended by marking it suspended during suspend. This allows the I2C core to catch this, and print a warning: WARNING: CPU: 1 PID: 13 at drivers/i2c/i2c-core.h:54 __i2c_transfer+0x4a4/0x4e4 i2c i2c-6: Transfer while suspended Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-11-06i2c: sh_mobile: implement atomic transfersUlrich Hecht1-20/+66
Implements atomic transfers to fix reboot/shutdown on r8a7790 Lager and similar boards. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> [wsa: some whitespace fixing] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-04i2c: Use separate MODULE_AUTHOR() statements for multiple authorsJarkko Nikula1-1/+2
Modules with multiple authors should use multiple MODULE_AUTHOR() statements according to comment in include/linux/module.h. Split the i2c modules with multiple authors to use multiple MODULE_AUTHOR() statements. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-29i2c: sh_mobile: simplify code and remove false compilation warningViresh Kumar1-5/+2
This currently generates a warning: drivers/i2c/busses/i2c-sh_mobile.c: In function 'sh_mobile_i2c_isr': drivers/i2c/busses/i2c-sh_mobile.c:399:26: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] Though the code looks okay and shouldn't ever use the variable uninitialized. Fix the warning by moving the code around and getting rid of 'data'. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> [wsa: minor updates to commit message] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-03-25i2c: drivers: Use generic definitions for bus frequenciesAndy Shevchenko1-6/+3
Since we have generic definitions for bus frequencies, let's use them. Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Robert Richter <rrichter@marvell.com> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Elie Morisse <syniurge@gmail.com> Acked-by: Nehal Shah <nehal-bakulchandra.shah@amd.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-11-14i2c: sh_mobile: Use dma_request_chan() directly for channel requestPeter Ujfalusi1-1/+1
dma_request_slave_channel_reason() is: dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-09i2c: sh_mobile: use new clock calculation formulas for Gen2Wolfram Sang1-5/+5
We measured the clock on a Lager and an Ebisu board. The new formula gives better results for both. So after Gen3, switch to this formula for all Gen2 SoCs. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-09i2c: sh_mobile: use new clock calculation formulas for Gen3Wolfram Sang1-3/+3
We could finally measure the clock on an Ebisu board. The new formula gives way better results, i.e. 100kHz instead of 106kHz and 400kHz instead of 387kHz. Switch to these formulas for all Gen3 SoCs. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-09i2c: sh_mobile: sort compatible entriesWolfram Sang1-2/+2
Makes it easier to add new ones. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-23i2c: sh_mobile: update copyright and commentsWolfram Sang1-4/+3
Update copyright years and add Renesas to it. Add/update comments to make driver easier to understand. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-23i2c: sh_mobile: refactor rx isrWolfram Sang1-29/+21
Remove the do_while loop which was just there to have an easy exit with "break;" and replace it with if-else-blocks which should make the state machine clearer. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-23i2c: sh_mobile: replace break; with if-blockWolfram Sang1-4/+3
In preparation to remove the do-while-loop. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-23i2c: sh_mobile: remove is_first_byte functionWolfram Sang1-7/+2
All state machines deal with pd->pos values. This helper function is an exception and makes it only more confusing. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-23i2c: sh_mobile: drop 'data' argument from i2c_op functionWolfram Sang1-24/+17
It is clear that we always send the address in TX_FIRST and data in TX. No need to pass it from the caller. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-23i2c: sh_mobile: remove get_data functionWolfram Sang1-15/+8
It makes the code much easier comprehensible to explicitly code that the first byte will be client address and all the following bytes are the actual data. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-23i2c: sh_mobile: simplify sending address for RXWolfram Sang1-6/+2
pd->pos won't be smaller than -1, so we can simplify the logic. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-18i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E)Fabrizio Castro1-0/+1
Similarly to R-Car E3, RZ/G2E doesn't come with automatic transmission registers, as such it is not considered compatible with the existing fallback bindings. Add SoC specific binding compatibility to allow for later support for automatic transmission. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-27i2c: sh_mobile: add support for r8a77990 (R-Car E3)Simon Horman1-0/+1
Add support for the IIC code for the r8a77990 (R-Car E3). It is not considered compatible with existing fallback bindings due to the documented absence of automatic transmission registers. These registers are currently not used by the driver and thus the provides the same behaviour for "renesas,iic-r8a77990" and "renesas,rcar-gen3-iic". The point of declaring incompatibility is to allow for automatic transmission register support to be added to "renesas,iic-r8a77990" and "renesas,rcar-gen3-iic" in future. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-29i2c: sh_mobile: Remove dummy runtime PM callbacksJarkko Nikula1-18/+0
Platform drivers don't need dummy runtime PM callbacks that just return success and non-NULL pm pointer in their struct device_driver in order to have runtime PM happening. This has changed since following commits: 05aa55dddb9e ("PM / Runtime: Lenient generic runtime pm callbacks") 543f2503a956 ("PM / platform_bus: Allow runtime PM by default") 8b313a38ecff ("PM / Platform: Use generic runtime PM callbacks directly") Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-31i2c: sh_mobile: fix leak when using DMA bounce bufferWolfram Sang1-2/+4
We only freed the bounce buffer after successful DMA, missing the cases where DMA setup may have gone wrong. Use a better location which always gets called after each message and use 'stop_after_dma' as a flag for a successful transfer. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-31i2c: sh_mobile: define start_ch() void as it only returns 0 anyhowWolfram Sang1-6/+3
After various refactoring over the years, start_ch() doesn't return errno anymore, so make the function return void. This saves the error handling when calling it which in turn eases cleanup of resources of a future patch. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-31i2c: refactor function to release a DMA safe bufferWolfram Sang1-1/+1
a) rename to 'put' instead of 'release' to match 'get' when obtaining the buffer b) change the argument order to have the buffer as first argument c) add a new argument telling the function if the message was transferred. This allows the function to be used also in cases where setting up DMA failed, so the buffer needs to be freed without syncing to the message buffer. Also convert the only user. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-24i2c: use SPDX identifier for Renesas driversWolfram Sang1-9/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-05i2c: sh_mobile: use core to detect 'no zero length read' quirkWolfram Sang1-5/+5
And don't reimplement in the driver. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-09i2c: busses: remove superfluous ignoring of children for RPMWolfram Sang1-11/+0
These days, the I2C core ensures that the embedded adapter device ignores the PM states of its children already. Because the adapter device is an opaque logical device, there is no need for drivers to repeat that again. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: sh_mobile: let r8a7790 (R-Car H2) use the new formulaWolfram Sang1-1/+1
Make use of the new formula for more precise bus frequencies. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: sh_mobile: add new frequency calculation for later SoCWolfram Sang1-1/+18
The formula to generate the desired bus speeds has changed a little over time. Implement the new formula and allow drivers to opt-in by changing to this new config set. Ensure in probe that we don't divide by zero. The returned values on a R-Car H2 (r8a7790/Lager board) match the suggested values in the datasheet. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: sh_mobile: add helper to check frequency calculationsWolfram Sang1-22/+27
Because we will add a second formula soon, put the sanity checks for the computed results into a separate function. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: sh_mobile: let RuntimePM do the clock handlingWolfram Sang1-18/+17
Start RuntimePM a bit earlier, so we can use it to enable the clock during probe for frequency calculations. Make sure it is enabled before calling setup(). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: sh_mobile: require setup callbackWolfram Sang1-9/+6
Require the setup callback and move the frequency calculation into it. This is in preparation for supporting multiple formulas. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: sh_mobile: allow setup callback to return errnoWolfram Sang1-4/+9
The setup callback will be more generic and, thus, need to be able to return error codes. Change the return type to 'int' for that. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: sh_mobile: move type detection upwardsWolfram Sang1-6/+4
For refactoring reasons, we will need this information before the setup callback. Also, simplify the comment to a oneliner. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-03i2c: sh_mobile: use core helper to decide when to use DMAWolfram Sang1-2/+6
This ensures that we fall back to PIO if the message length is too small for DMA being useful. Otherwise, we use DMA. A bounce buffer might be applied by the helper if the original message buffer is not DMA safe. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27i2c: sh_mobile: make sure to not accidently trigger STOPWolfram Sang1-3/+3
The datasheet was a bit vague, but after consultation with HW designers, we came to the conclusion that we should set the SCP bit always when dealing only with the ICE bit. A set SCP bit is ignored, and thus fine, a cleared one may trigger STOP on the bus. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27i2c: sh_mobile: send STOP according to datasheetWolfram Sang1-23/+6
We initiate STOP (or REP_START) on the second last WAIT interrupt currently. This works fine but is not according to the datasheet which says to do it on the last WAIT interrupt. This also simplifies the code quite a lot, so let's do it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27i2c: sh_mobile: avoid unnecessary register readWolfram Sang1-1/+2
There is no data when the first WAIT interrupt arrives. No need to read something then. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27i2c: sh_mobile: let RuntimePM do the clock handlingWolfram Sang1-2/+0
No need to do it manually. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27i2c: sh_mobile: shorten exit of xfer routineWolfram Sang1-3/+1
We can use the ternary operator for easier reading. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-17 06:02:05 +0300