summaryrefslogtreecommitdiff
path: root/drivers/iio/dac/mcp4725.c
AgeCommit message (Collapse)AuthorFilesLines
2023-09-12iio: dac: mcp4725: Add dac_reg_offset to struct mcp4725_chip_infoBiju Das1-4/+4
The MCP4725 has a register offset '3' for reading DAC value compared to '4' for MCP4726. Add dac_reg_offset variable to struct mcp4725_chip_info to handle this difference. Drop chip_id from struct mcp4725_chip_info as it is unused. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230903115548.59306-5-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-09-12iio: dac: mcp4725: Add use_ext_ref_voltage to struct mcp4725_chip_infoBiju Das1-3/+5
The MCP4725 has external voltage reference compared MCP4725 which has reference embeedded in eeprom. Add use_ext_ref_voltage variable to struct mcp4725_chip_info to handle this difference. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230903115548.59306-4-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-09-12iio: dac: mcp4725: Use i2c_get_match_data()Biju Das1-14/+26
Add struct mcp4725_chip_info with chan_spec and chip_id variable. After this simplify probe() by replacing device_get_match_data() and id lookup for retrieving match data by i2c_get_match_data() by converting enum->pointer for data in the match table. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230903115548.59306-3-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-09-12iio: dac: mcp4725: Replace variable 'id' from struct mcp4725_dataBiju Das1-8/+8
Replace the variable 'id' from struct mcp4725_data with local variable chip_id in probe() as the id variable is not used elsewhere in the driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230903115548.59306-2-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-06-15Merge tag 'iio-for-6.5a' of ↵Greg Kroah-Hartman1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanup for the 6.5 cycle. New device support - honeywell,mprls0025pa * New driver and dt-bindings for this series of pressure sensors. - invensense,mpu6050 * Add support for ICM 20600 IMU (ID, bindings and device data). - melexis,mlx90614 * Add support for mlx90615 Infra Red Thermometer after driver cleanup and refactoring to support the differences in this device. - renesas,x9250 * New driver and bindings for this quad potentiometer. - rockchip,saradc * Add support for RK3588. Also included is a bunch of refactoring and cleanup for that driver. - rohm,bu27008 * New driver bindings etc for this 5 photodiode color sensor. - st,lsm9ds0/st,st-sensors * ID added for LSM303D accelerometer and magnetometer including ACPI binding. - ti,opt4001 * New driver and bindings for this ambient light sensor. Features - core * Introduce iio_validate_own_trigger() for cases where a driver can only consumer a trigger it registered (detected via same parent device). Use it in the kionix,kx022a driver and new rohm,by27008 driver. - dynaimage,al3320a * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices. - kionix,kx002a * Enable asynchronous probe. - rohm,bu27034 * Enable asynchronous probe. - ti,tmp006 * Explicit support for DT including binding documentation. Cleanups, minor fixes and misc improvements. - treewide * Switch I2C drivers from probe_new() back to probe() - part of the long process of getting rid of a parameter from probe() * Various whitespace and typo fixes not otherwise called out. - core * industrialio-buffer,Style cleanup. * Add documentation to extend_name field of struct iio_chan_spec to direct people using it towards the label infrastructure instead. extend_name was a design mistake a long time back so directly people away from it may be useful. - adi,ad7606 * Add HAS_IOPORT dependency to prepare for some Kconfig changes. - bosch,bma400 * Drop pointless print of ret in a dev_err_probe() message. - invensense,icm42600 * Rework timestamp handling to reduce jitter. - mediatek,mt7986-auxdac * Add DT binding for this part. - qcom,spmi-vadc * Allow for 1/16th prescaling used on a few devices. * Various changes to channel labeling and naming, including dropping use of fwnode_name which generates odd channel names. Small ABI change as a result, but not thought to be a problem for users of this platform. - st,lsm6dsx * dt-binding: Use common schema for mount-matrix via a reference. - st,stm32 * Add a debug print for when legacy channel config is used. - ti,palmas-adc * Drop unused i2c.h include. * tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits) dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/ dt-bindings: iio: adc: Add rockchip,rk3588-saradc string iio: adc: rockchip_saradc: Use dev_err_probe iio: adc: rockchip_saradc: Match alignment with open parenthesis iio: adc: rockchip_saradc: Use of_device_get_match_data iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled iio: adc: rockchip_saradc: Add support for RK3588 iio: adc: rockchip_saradc: Add callback functions iio: temperature: tmp006: Add OF device matching support dt-bindings: iio: temperature: Add support for tmp006 staging: iio: Switch i2c drivers back to use .probe() iio: amplifiers: ad8366 Fix whitespace issue iio: imu: inv_icm42600: avoid frequent timestamp jitter MAINTAINERS: Add ROHM BU27008 iio: light: ROHM BU27008 color sensor iio: kx022a: Use new iio_validate_own_trigger() iio: trigger: Add simple trigger_validation helper dt-bindings: iio: light: ROHM BU27008 iio: mlx90614: Add MLX90615 support ...
2023-05-21iio: Switch i2c drivers back to use .probe()Uwe Kleine-König1-1/+1
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230515205048.19561-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: dac: mcp4725: Fix i2c_master_send() return value handlingMarek Vasut1-2/+14
The i2c_master_send() returns number of sent bytes on success, or negative on error. The suspend/resume callbacks expect zero on success and non-zero on error. Adapt the return value of the i2c_master_send() to the expectation of the suspend and resume callbacks, including proper validation of the return value. Fixes: cf35ad61aca2 ("iio: add mcp4725 I2C DAC driver") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230511004330.206942-1-marex@denx.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: dac: mcp4725: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+3
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-92-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König1-3/+1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-18iio: dac: mcp4725: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-4/+5
Using these newer macros allows the compiler to remove the unused structure and functions when !CONFIG_PM_SLEEP + removes the need to mark pm functions __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Philippe Reynes <tremyfr@yahoo.fr> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-16-jic23@kernel.org
2022-04-28iio: Replace strtobool() with kstrtobool()Lars-Peter Clausen1-2/+2
strtobool() is deprecated and just a wrapper around kstrtobool().Replace it with kstrtobool() so the deprecated function can be removed eventually. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220409105812.2113895-1-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-21iio:dac:mcp4725: Suppress clang W=1 warning about pointer to enum conversion.Jonathan Cameron1-1/+1
Cast to a uintptr_t rather than directly to the enum. As per the discussion in below linked media patch. Link: https://lore.kernel.org/linux-media/CAK8P3a2ez6nEw4d+Mqa3XXAz0RFTZHunqqRj6sCt7Y_Eqqs0rw@mail.gmail.com/ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20211128172445.2616166-7-jic23@kernel.org
2021-11-27iio: expose shared parameter in IIO_ENUM_AVAILABLEAntoniu Miclaus1-4/+4
The shared parameter should be configurable based on its usage, and not constrained to IIO_SHARED_BY_TYPE. This patch aims to improve the flexibility in using the IIO_ENUM_AVAILABLE define and avoid redefining custom iio enums that expose the shared parameter. An example is the ad5766.c driver where IIO_ENUM_AVAILABLE_SHARED was defined in order to achieve `shared` parameter customization. The current state of the IIO_ENUM_AVAILABLE implementation will imply similar redefinitions each time a driver will require access to the `shared` parameter. An example would be admv1013 driver which will require custom device attribute for the frequency translation modes: Quadrature I/Q mode and Intermediate Frequency mode. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20211119085627.6348-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio: dac: Convert powerdown read callbacks to sysfs_emit()Lars-Peter Clausen1-1/+1
Update DAC drivers powerdown attribute show callback to use the new sysfs_emit() function. sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in sanity checks. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210320071405.9347-5-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-21iio:dac:mcp4725: drop of_match_ptr and use generic fw propertiesJonathan Cameron1-22/+7
This enables use of ACPI PRP0001 and removes an antipattern I am trying to stop people copying in IIO. This particular case is more complex than most because it allowed probing via sysfs with out a fwnode but would presumably always have then failed. Now the code will assume that properties are the defaults if not specified or the firmware node is not present. This relaxation of the constraints should not break any existing cases and may enable some new ones. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Link: https://lore.kernel.org/r/20200910173242.621168-14-jic23@kernel.org
2020-06-14iio: remove explicit IIO device parent assignmentAlexandru Ardelean1-1/+0
This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this file is subject to the terms and conditions of version 2 of the gnu general public license see the file copying in the main directory of this archive for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 55 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.108941081@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-16iio: dac: mcp4725: add missing powerdown bits in store eepromJean-Francois Dagenais1-0/+1
When issuing the write DAC register and write eeprom command, the two powerdown bits (PD0 and PD1) are assumed by the chip to be present in the bytes sent. Leaving them at 0 implies "powerdown disabled" which is a different state that the current one. By adding the current state of the powerdown in the i2c write, the chip will correctly power-on exactly like as it is at the moment of store_eeprom call. This is documented in MCP4725's datasheet, FIGURE 6-2: "Write Commands for DAC Input Register and EEPROM" and MCP4726's datasheet, FIGURE 6-3: "Write All Memory Command". Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: dac: mcp4725: avoid using CONFIG_PM_SLEEPMarcus Folkesson1-9/+3
This is already handled by SIMPLE_DEV_PM_OPS(). Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-08iio: dac: mcp4725: Remove unneeded conversions to boolAndrew F. Davis1-1/+1
Found with scripts/coccinelle/misc/boolconv.cocci. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-22iio:dac: drop assignment of iio_info.driver_moduleJonathan Cameron1-1/+0
The equivalent of this is now done via macro magic when the relevant register call is made. The actual structure element will shortly go away. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-03-19iio: dac: mcp4725: Add OF device ID tableJavier Martinez Canillas1-2/+22
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: dac: mcp4725: fix odd_ptr_err.cocci warningsJulia Lawall1-1/+1
PTR_ERR should access the value just tested by IS_ERR Generated by: scripts/coccinelle/tests/odd_ptr_err.cocci CC: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: dac: mcp4725: add devicetree supportTomas Novotny1-6/+37
Signed-off-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: dac: mcp4725: support voltage reference selectionTomas Novotny1-7/+92
MCP47x6 chip supports selection of a voltage reference (VDD, VREF buffered or unbuffered). MCP4725 doesn't have this feature thus the eventual setting is ignored and user is warned. The setting is stored only in the volatile memory of the chip. You need to manually store it to the EEPROM of the chip via 'store_eeprom' sysfs entry. Signed-off-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: dac: mcp4725: fix incorrect commentTomas Novotny1-1/+1
Number 2 is referencing to the settings with the largest available resistor. No functional change. Signed-off-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: dac: mcp4725: use regulator frameworkTomas Novotny1-9/+37
Use a standard framework to get the reference voltage. It is done that way in the iio subsystem and it will simplify extending of the driver. Structure mcp4725_platform_data is left undeleted because it used in the next patch. This change breaks the current users of the driver, but there is no mainline user of struct mcp4725_platform_data. Signed-off-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-08Merge 4.5-rc3 into staging-nextGreg Kroah-Hartman1-0/+1
We want the upstream staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-09iio: dac: mcp4725: set iio name property in sysfsYong Li1-0/+1
Without this change, the name entity for mcp4725 is missing in /sys/bus/iio/devices/iio\:device*/name With this change, name is reported correctly Signed-off-by: Yong Li <sdliyong@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-03iio: dac: mcp4725: Add basic support for MCP4726Akinobu Mita1-20/+67
MCP4726 is a single channel 12-bit DAC. We can support MCP4726 with a little changes to mcp4725 driver. In power-down mode, they have different selection of VOUT pull-down registers. MCP4726 also has features: - Output gain options: 1x, 2x - Voltage reference selection: VDD, VREF (Unbuffered or Buffered) But these are not supported in this change. (1x gain, VDD is selected) datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/22272C.pdf Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: linux-iio@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-01-11iio: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-18iio:dac:mcp4725 drop specification of scan type as unused in this driver.Jonathan Cameron1-1/+0
IIO_ST is going away as it is a pain to maintain so the simplest path with this driver is to not specify the unused scan type. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2013-10-24iio: dac: mcp4725: Remove redundant codeSachin Kamat1-7/+1
Remove an inconsequential print message and return directly thereby cleaning up some code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-01iio:mcp4725: Report scale as fractional valueLars-Peter Clausen1-5/+3
Move the complexity of calculating the fixed point scale to the core. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-25Merge 3.12-rc2 into staging-next.Greg Kroah-Hartman1-6/+6
This resolves the merge problem with two iio drivers that Stephen Rothwell pointed out. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-21iio: Fix mcp4725 dev-to-indio_dev conversion in suspend/resumePeter Meerwald1-6/+6
dev_to_iio_dev() is a false friend Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-15iio: refactor info mask and ext_info attribute creation.Jonathan Cameron1-1/+2
Introduce an enum to specify whether the attribute is separate or shared. Factor out the bitmap handling for loop into a separate function. Tidy up error handling and add a NULL assignment to squish a false positive warning from GCC. Change ext_info shared type from boolean to enum and update in all drivers. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2013-08-04iio:mcp4725: Use devm_iio_device_allocPeter Meerwald1-19/+7
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03iio:dac:mcp4725 wrong return type of attribute _show functionJonathan Cameron1-1/+1
Should be ssize_t and is int. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reported-by: Fengguan Wu <fengguang.wu@intel.com> Acked-by: Peter Meerwald <pmeerw@pmeerw.net>
2013-08-03iio: add powerdown to mcp4725 dac drivePeter Meerwald1-2/+85
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03iio: add store_eeprom to mcp4725 dac driverPeter Meerwald1-2/+62
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-03-17iio:dac:mcp4725 move to info_mask_(shared_by_type/separate)Jonathan Cameron1-2/+2
The original info_mask is going away in favour of the broken out versions. Signed-off-by: Jonathan Cameron <jic23@kernel.org> cc: Peter Meerwald <pmeerw@pmeerw.net>
2013-01-04Drivers: iio: remove __dev* attributes.Greg Kroah-Hartman1-4/+4
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13iio: add mcp4725 I2C DAC driverPeter Meerwald1-0/+227
v5: * fix warnings (Jonathan Cameron) v4: * remove unused indio_dev pointer in mcp4725_data (Jonathan Cameron) * use u16 instead of unsigned short in mcp4725_data (Jonathan Cameron) * #include mcp4725.h from linux/iio/dac/ v3: * move from staging to drivers/iio * switch to chan_spec * dev_get_drvdata() -> dev_to_iio_dev() * annotate probe() and remove() with __devinit and __devexit v2 (based on comments from Jonathan Cameron and Lars-Peter Clausen): * did NOT switch to chan_spec yet * rebase to staging-next tree, update iio header locations * dropped dac.h #include, not needed * strict_strtol() -> kstrtol() * call iio_device_unregister() in remove() * everything in one patch Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-06 14:41:07 +0300