summaryrefslogtreecommitdiff
path: root/drivers/iio/light/ltr501.c
AgeCommit message (Collapse)AuthorFilesLines
2020-08-22iio:light:ltr501 Fix timestamp alignment issue.Jonathan Cameron1-6/+9
One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. Here we use a structure on the stack. The driver already did an explicit memset so no data leak was possible. Forced alignment of ts is not strictly necessary but probably makes the code slightly less fragile. Note there has been some rework in this driver of the years, so no way this will apply cleanly all the way back. Fixes: 2690be905123 ("iio: Add Lite-On ltr501 ambient light / proximity sensor driver") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: <Stable@vger.kernel.org>
2020-06-14iio: remove left-over parent assignmentsAlexandru Ardelean1-1/+0
These were found by doing some shell magic: ------------ for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do if grep 'parent =' $file | grep -v trig | grep -vq devm_; then echo "$file -> $(grep "parent =" $file)" fi done ----------- The output is bearable [after the semantic patch is applied]. There is a mix of trigger assignments with some iio device parent assignments that are removed via this patch. JC: A few more added via inspection of all parent = statements in drivers/iio. Some of these may just have crossed with this series, others were less obvious to scripting due to some cross file / module boundary calls. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-11iio: light: ltr501: Constify structsRikard Falkeborn1-19/+20
Constify some data structs that are never changed. In order to do so, also update a couple of functions that now need to accept pointers to const struct instead of struct. While at it, update a few more functions to accept pointers to const struct instead of pointers. This allows the compiler to put more data in the code segment instead of the data segment, as seen by the output of the file command: Before: text data bss dec hex filename 27080 8144 192 35416 8a58 drivers/iio/light/ltr501.o After: text data bss dec hex filename 27688 7536 192 35416 8a58 drivers/iio/light/ltr501.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_readJonathan Cameron1-1/+1
This only occurs once in the driver and isn't needed in this case either, so drop it. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this file is subject to the terms and conditions of version 2 of the gnu general public license see the file copying in the main directory of this archive for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 55 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.108941081@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-22iio:light: drop assign iio_info.driver_module and iio_trigger_ops.ownerJonathan Cameron1-4/+0
The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-21iio: light: ltr501 Fix interchanged als/ps register fieldFranziska Naepelt1-2/+2
The register mapping for the IIO driver for the Liteon Light and Proximity sensor LTR501 interrupt mode is interchanged (ALS/PS). There is a register called INTERRUPT register (address 0x8F) Bit 0 represents PS measurement trigger. Bit 1 represents ALS measurement trigger. This two bit fields are interchanged within the driver. see datasheet page 24: http://optoelectronics.liteon.com/upload/download/DS86-2012-0006/S_110_LTR-501ALS-01_PrelimDS_ver1%5B1%5D.pdf Signed-off-by: Franziska Naepelt <franziska.naepelt@idt.com> Fixes: 7ac702b3144b6 ("iio: ltr501: Add interrupt support") Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: light: ltr501: claim direct mode during raw writesAlison Schofield1-30/+51
Driver was checking for direct mode but not locking it. Use claim/release helper functions to guarantee the device stays in direct mode during all raw write operations. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: light: ltr501: claim direct mode during select raw readsAlison Schofield1-10/+20
Driver was checking for direct mode but not locking it. Use claim/release helper functions to guarantee the device stays in direct mode during required raw read cases. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30iio:core: timestamping clock selection supportGregor Boirie1-3/+4
Adds a new per-device sysfs attribute "current_timestamp_clock" to allow userspace to select a particular POSIX clock for buffered samples and events timestamping. Following clocks, as listed in clock_gettime(2), are supported: CLOCK_REALTIME, CLOCK_MONOTONIC, CLOCK_MONOTONIC_RAW, CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_COARSE, CLOCK_BOOTTIME and CLOCK_TAI. Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Acked-by: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-19iio-light: Use a signed return type for ltr501_match_samp_freq()Markus Elfring1-1/+1
The return type "unsigned int" was used by the ltr501_match_samp_freq() function despite of the aspect that it will eventually return a negative error code. Improve this implementation detail by deletion of the type modifier then. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-20Merge 4.2-rc3 into staging-nextGreg Kroah-Hartman1-1/+1
We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-11iio: Drop owner assignment from i2c_driverKrzysztof Kozlowski1-1/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-05iio:light:ltr501: fix variable in ltr501_initHartmut Knaack1-1/+1
When filling data->als_contr, the register content read into status needs to be used, instead of the return status value of regmap_read. Fixes: 8592a7eefa540 ("iio: ltr501: Add support for ltr559 chip") Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17iio: ltr501: Add light channel supportKuppuswamy Sathyanarayanan1-0/+51
Added support to calculate lux value from visible and IR spectrum adc count values. Also added IIO_LIGHT channel to enable user read the lux value directly from device using illuminance input ABI. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-16iio: ltr501: Fix proximity threshold boundary checkKuppuswamy Sathyanarayanan1-1/+1
Currently, proximity sensor boundary check is done inside the switch block but outside the case statement.Since this code will never get executed, moved the check outside the switch case statement. 867 case IIO_PROXIMITY: 868 switch (dir) { // Following line has been moved outside the switch block. 869 if (val > LTR501_PS_THRESH_MASK) 870 return -EINVAL; 871 case IIO_EV_DIR_RISING: Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-03iio:light:ltr501 bug in parameter sanity check.Jonathan Cameron1-1/+1
Clearly the intent was to error if the value was not 0 or 1. As implemented we have (A != 0 || A != 1) which is always true as A is never both 0 and 1 at the same time. As the autobuilder suggested, && makes more sense for this error check. Reported-by: kbuild test robot <fengguang.wu@intel.com> Acked-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-26iio: ltr501: Add support for ltr301 chipDaniel Baluta1-4/+72
Added support for Liteon 301 Ambient light sensor. Since LTR-301 and LTR-501 are register compatible(and even have same part id), LTR-501 driver has been extended to support both devices. LTR-501 is similar to LTR-301 in ALS sensing, But the only difference is, LTR-501 also supports proximity sensing. LTR-501 - ALS + Proximity combo LTR-301 - ALS sensor. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-26iio: ltr501: Add support for ltr559 chipDaniel Baluta1-34/+184
This device is register compatible with LTR501, with a minor difference for ALS control register as showed below: ALS Control register for LTR501: 7 6 5 4 3 2 1 0 +------+------+------+------+------+------+------+------+ | | | | | | Reserved | Gain | SW | ALS Mode | | | | Reset| | +------+------+------+------+------+------+------+------+ ALS Control register for LTR559: 7 6 5 4 3 2 1 0 +------+------+------+------+------+------+------+------+ | | | | | | Reserved | Gain | SW | ALS | | | | Reset| Mode | +------+------+------+------+------+------+------+------+ We handle this difference by introducing ltr501_chip_info. Datasheet for LTR559 is at: http://optoelectronics.liteon.com/upload/download/DS86-2013-0003/S_110_LTR-559ALS-01_DS_V1.pdf Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-19iio: ltr501: Add ACPI enumeration supportKuppuswamy Sathyanarayanan1-0/+8
Added ACPI enumeration support for LTR501 chip. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-19iio: ltr501: Add interrupt rate control supportKuppuswamy Sathyanarayanan1-7/+406
Added rate control support for ALS and proximity threshold interrupts.Also, Added support to modify and read ALS & proximity sensor sampling frequency. LTR-501 supports interrupt rate control using persistence register settings. Writing <n> to persistence register would generate interrupt only if there are <n> consecutive data values outside the threshold range. Since we don't have any existing ABI's to directly control the persistence register count, we have implemented the rate control using IIO_EV_INFO_PERIOD. _period event attribute represents the amount of time in seconds an event should be true for the device to generate the interrupt. So using _period value and device frequency, persistence count is calculated in driver using following logic. count = period / measurement_rate If the given period is not a multiple of measurement rate then we round up the value to next multiple. This patch also handles change to persistence count whenever there is change in frequency. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-19iio: ltr501: Add interrupt supportKuppuswamy Sathyanarayanan1-6/+313
This patch adds interrupt support for Liteon 501 chip. Interrupt will be generated whenever ALS or proximity data exceeds values given in upper and lower threshold register settings. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-19iio: ltr501: Add integration time supportKuppuswamy Sathyanarayanan1-1/+89
Added support to modify and read ALS integration time. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-18iio: ltr501: Add regmap support.Kuppuswamy Sathyanarayanan1-43/+86
Added regmap support. It will be useful to handle bitwise updates to als & ps control registers. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-09iio: light: ltr501: Fix alignment to match open parenthesisDaniel Baluta1-19/+23
This makes ltr501 code consistent with the coding style adopted for the new drivers added to IIO. We prepare the path for adding support for LTR559 chip. Reported by checkpatch.pl Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-02iio: light: ltr501: Powerdown device on errorCristina Opriceana1-8/+10
Power down device when an error occurs in order to avoid wasting power. Move powerdown function up to be seen by the new call and align parameters for the ltr501_write_contr() call. Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-12iio: Add Lite-On ltr501 ambient light / proximity sensor driverPeter Meerwald1-0/+445
combined ambient light (two channels) and proximity sensor with I2C interface; the ALS channels are visible+IR and IR datasheet is here http://optoelectronics.liteon.com/upload/download/DS86-2012-0006/P_100_LTR-501ALS-01_PrelimDS_ver1.1.pdf v3: * fix use of sizeof in _read_als() v2: (thanks to Lars-Peter Clausen) * cannot use devm_iio_device_register() due to cleanup order in _remove() * mutex around data wait/read * turn info message in _probe() into check for part number * change copyright year to 2014 Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-18 23:11:23 +0300