summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)AuthorFilesLines
2023-02-18iio: adc: ad7791: fix IRQ flagsNuno Sá1-1/+1
The interrupt is triggered on the falling edge rather than being a level low interrupt. Fixes: da4d3d6bb9f6 ("iio: adc: ad-sigma-delta: Allow custom IRQ flags") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230120124645.819910-1-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-02-18iio: buffer: make sure O_NONBLOCK is respectedNuno Sá1-8/+11
For output buffers, there's no guarantee that the buffer won't be full in the first iteration of the loop in which case we would block independently of userspace passing O_NONBLOCK or not. Fix it by always checking the flag before going to sleep. While at it (and as it's a bit related), refactored the loop so that the stop condition is 'written != n', i.e, run the loop until all data has been copied into the IIO buffers. This makes the code a bit simpler. Fixes: 9eeee3b0bf190 ("iio: Add output buffer support") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230216101452.591805-3-nuno.sa@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-02-18iio: buffer: correctly return bytes written in output buffersNuno Sá1-1/+1
If for some reason 'rb->access->write()' does not write the full requested data and the O_NONBLOCK is set, we would return 'n' to userspace which is not really truth. Hence, let's return the number of bytes we effectively wrote. Fixes: 9eeee3b0bf190 ("iio: Add output buffer support") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230216101452.591805-2-nuno.sa@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-02-06Merge 6.2-rc7 into char-misc-nextGreg Kroah-Hartman10-30/+143
We need the char-misc driver fixes in here as other patches depend on them. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-02iio: light: vcnl4000: Fix WARN_ON on uninitialized lockMårten Lindahl1-1/+2
There are different init functions for the sensors in this driver in which only one initializes the generic vcnl4000_lock. With commit e21b5b1f2669 ("iio: light: vcnl4000: Preserve conf bits when toggle power") the vcnl4040 sensor started to depend on the lock, but it was missed to initialize it in vcnl4040's init function. This has not been visible until we run lockdep on it: DEBUG_LOCKS_WARN_ON(lock->magic != lock) at kernel/locking/mutex.c:575 __mutex_lock+0x4f8/0x890 Call trace: __mutex_lock mutex_lock_nested vcnl4200_set_power_state vcnl4200_init vcnl4000_probe Fix this by initializing the lock in the probe function instead of doing it in the chip specific init functions. Fixes: e21b5b1f2669 ("iio: light: vcnl4000: Preserve conf bits when toggle power") Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230131140109.2067577-1-marten.lindahl@axis.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-02-02iio: adis16480: select CONFIG_CRC32Arnd Bergmann1-0/+1
In rare randconfig builds, the missing CRC32 helper causes a link error: ld.lld: error: undefined symbol: crc32_le >>> referenced by usercopy_64.c >>> vmlinux.o:(adis16480_trigger_handler) Fixes: 941f130881fa ("iio: adis16480: support burst read function") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230131094616.130238-1-arnd@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-28iio: adc: ad7291: Fix indentation error by adding extra spacesAnup Sharma1-1/+1
Added extra spaces before statements to fix following indentation warnings reported by checkpatch.pl. WARNING: Statements should start on a tabstop + return 0; Signed-off-by: Anup Sharma <anupnewsmail@gmail.com> Link: https://lore.kernel.org/r/Y9Vf4Tp8JKvy+y0u@yoga Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-28drivers: iio: adc: ltc2497: fix LSB shiftIan Ray1-4/+2
Correct the "sub_lsb" shift for the ltc2497 and drop the sub_lsb element which is now constant. An earlier version of the code shifted by 14 but this was a consequence of reading three bytes into a __be32 buffer and using be32_to_cpu(), so eight extra bits needed to be skipped. Now we use get_unaligned_be24() and thus the additional skip is wrong. Fixes: 2187cfeb3626 ("drivers: iio: adc: ltc2497: LTC2499 support") Signed-off-by: Ian Ray <ian.ray@ge.com> Link: https://lore.kernel.org/r/20230127125714.44608-1-ian.ray@ge.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-28iio: accel: mma9551_core: Prevent uninitialized variable in ↵Harshit Mogalapalli1-1/+4
mma9551_read_config_word() Smatch Warns: drivers/iio/accel/mma9551_core.c:299 mma9551_read_config_word() error: uninitialized symbol 'v'. When (offset >= 1 << 12) is true mma9551_transfer() will return -EINVAL without 'v' being initialized, so check for the error and return. Note: No actual bug as caller checks the return value and does not use the parameter in the problem case. Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20230126153610.3586243-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-28iio: accel: mma9551_core: Prevent uninitialized variable in ↵Harshit Mogalapalli1-1/+4
mma9551_read_status_word() Smatch Warns: drivers/iio/accel/mma9551_core.c:357 mma9551_read_status_word() error: uninitialized symbol 'v'. When (offset >= 1 << 12) is true mma9551_transfer() will return -EINVAL without 'v' being initialized, so check for the error and return. Note: Not a bug as such because the caller checks return value and doesn't not use this parameter in the problem case. Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20230126152147.3585874-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-28iio: imu: fix spdx formatTom Rix1-1/+1
checkpatch reports WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 FILE: drivers/iio/imu/bno055/bno055_ser_trace.c:1: +//SPDX-License-Identifier: GPL-2.0 Add a space Fixes: 2eef5a9cc643 ("iio: imu: add BNO055 serdev driver") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230124194301.656518-1-trix@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-28iio: adc: imx93: Fix spelling mistake "geting" -> "getting"Colin Ian King1-1/+1
Thrre is a spelling mistake in a dev_err_probe message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20230124100413.684416-1-colin.i.king@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-28iio: adc: qcom-spmi-adc5: Fix the channel nameAndy Shevchenko1-1/+9
The node name can contain an address part which is unused by the driver. Moreover, this string is propagated into the userspace label, sysfs filenames *and breaking ABI*. Cut the address part out before assigning the channel name. Fixes: 4f47a236a23d ("iio: adc: qcom-spmi-adc5: convert to device properties") Reported-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20230118100623.42255-1-andriy.shevchenko@linux.intel.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-22iio: adc: add imx93 adc supportHaibo Chen3-0/+495
The ADC in i.mx93 is a total new ADC IP, add a driver to support this ADC. Currently, only support one shot normal conversion triggered by software. For other mode, will add in future. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20230117135137.1735536-2-haibo.chen@nxp.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: adc: ti-ads7924: add Texas Instruments ADS7924 driverHugo Villeneuve3-0/+486
The Texas Instruments ADS7924 is a 4 channels, 12-bit analog to digital converter (ADC) with an I2C interface. Datasheet: https://www.ti.com/lit/gpn/ads7924 Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20230115170623.3680647-2-hugo@hugovil.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.Philippe De Muyter1-2/+3
Signed-off-by: Philippe De Muyter <phdm@macqel.be> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/1673874434-30750-3-git-send-email-Philippe.DeMuyter@macq.eu Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: imu: st_lsm6dsx: fix naming of 'struct iio_info' in st_lsm6dsx_shub.c.Philippe De Muyter1-6/+6
We need the name 'st_lsm6dsx_ext_info' for the actual 'iio_chan_spec_ext_info'. Rename the 'st_lsm6dsx_ext_info' in st_lsm6dsx_shub.c to 'st_lsm6dsx_shub_info'. For consistency, replace also 'ext' by 'shub' in 'st_lsm6dsx_ext_attributes' and 'st_lsm6dsx_ext_attribute_group'. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/1673874434-30750-2-git-send-email-Philippe.DeMuyter@macq.eu Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: imu: fxos8700: fix MAGN sensor scale and unitCarlos Song1-3/+3
+/-1200uT is a MAGN sensor full measurement range. Magnetometer scale is the magnetic sensitivity parameter. It is referenced as 0.1uT according to datasheet and magnetometer channel unit is Gauss in sysfs-bus-iio documentation. Gauss and uTesla unit conversion relationship as follows: 0.1uT = 0.001Gs. Set magnetometer scale and available magnetometer scale as fixed 0.001Gs. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <carlos.song@nxp.com> Link: https://lore.kernel.org/r/20230118074227.1665098-5-carlos.song@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MINCarlos Song1-1/+0
FXOS8700_CTRL_ODR_MIN is not used but value is probably wrong. Remove it for a good readability. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <carlos.song@nxp.com> Link: https://lore.kernel.org/r/20230118074227.1665098-4-carlos.song@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: imu: fxos8700: fix failed initialization ODR mode assignmentCarlos Song1-2/+4
The absence of correct offset leads a failed initialization ODR mode assignment. Select MAX ODR mode as the initialization ODR mode by field mask and FIELD_PREP. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <carlos.song@nxp.com> Link: https://lore.kernel.org/r/20230118074227.1665098-3-carlos.song@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: imu: fxos8700: fix incorrect ODR mode readbackCarlos Song1-6/+6
The absence of a correct offset leads an incorrect ODR mode readback after use a hexadecimal number to mark the value from FXOS8700_CTRL_REG1. Get ODR mode by field mask and FIELD_GET clearly and conveniently. And attach other additional fix for keeping the original code logic and a good readability. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <carlos.song@nxp.com> Link: https://lore.kernel.org/r/20230118074227.1665098-2-carlos.song@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: light: vcnl4000: Add interrupt support for vcnl4040Mårten Lindahl1-0/+169
Add support to configure proximity sensor interrupts and threshold limits for vcnl4040. If an interrupt is detected an event will be pushed to the event interface. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230117190017.3789181-4-marten.lindahl@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: light: vcnl4000: Make irq handling more genericMårten Lindahl1-10/+14
This driver supports 4 chips, by which only one (vcnl4010) handles interrupts and has support for triggered buffer. The setup of these functions is hardcoded for vcnl4010 inside the generic vcnl4000_probe, and thus ignores the chip specific configuration structure where all other chip specific functions are specified. This complicates adding interrupt handler and triggered buffer support to chips which may have support for it. Add members for irq threads and iio_buffer_setup_ops to the generic vcnl4000_chip_spec struct, so that instead of checking a chip specific boolean irq support, we check for a chip specific triggered buffer handler, and/or a chip specific irq thread handler. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230117190017.3789181-3-marten.lindahl@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: light: vcnl4000: Prepare for more generic setupMårten Lindahl1-128/+128
In order to allow the chip_spec array reference the function pointers for interrupts, the code for these functions need to be moved above the chip_spec array. This is a prestep to support a more generic setup of interrupts. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230117190017.3789181-2-marten.lindahl@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: dac: add support for max5522Angelo Dureghello3-0/+221
Add initial support for DAC max5522. Tested writing DAC A and B with some values, from 0 to 1023, measured output voltages, driver works properly. Additions for max5523/24/25 will follow. Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Link: https://lore.kernel.org/r/20221106165928.223318-1-angelo.dureghello@timesys.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: light: cm32181: Fix PM support on system with 2 I2C resourcesKai-Heng Feng1-4/+5
Commit c1e62062ff54 ("iio: light: cm32181: Handle CM3218 ACPI devices with 2 I2C resources") creates a second client for the actual I2C address, but the "struct device" passed to PM ops is the first I2C client that can't talk to the sensor. That means the I2C transfers in both suspend and resume routines can fail and blocking the whole suspend process. Instead of using the first client for I2C transfer, use the I2C client stored in the cm32181 private struct so the PM ops can get the correct I2C client to really talk to the sensor device. Fixes: 68c1b3dd5c48 ("iio: light: cm32181: Add PM support") BugLink: https://bugs.launchpad.net/bugs/1988346 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2152281 Tested-by: Wahaj <wahajaved@protonmail.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230118170422.339619-1-kai.heng.feng@canonical.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: core: Sort headersAndy Shevchenko1-15/+17
Sort the headers in alphabetic order in order to ease the maintenance for this part. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230118074828.66155-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: core: Replace iio_sysfs_match_string_with_gaps() by __sysfs_match_string()Andy Shevchenko1-31/+1
None of the current users is using gaps in the list of the items. No need to have a specific function for that, just replace it by library available __sysfs_match_string(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230118074828.66155-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: adc: xilinx-ams: Convert to use fwnode_device_is_compatible()Andy Shevchenko1-6/+3
Replace open coded fwnode_device_is_compatible() in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20230119174749.76769-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-16ARM: s3c: remove s3c24xx specific hacksArnd Bergmann1-3/+3
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-14iio: hid: fix the retval in gyro_3d_capture_sampleDmitry Perchanov1-0/+1
Return value should be zero for success. This was forgotten for timestamp feature. Verified on RealSense cameras. Fixes: 4648cbd8fb92 ("iio: hid-sensor-gyro-3d: Add timestamp channel") Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com> Link: https://lore.kernel.org/r/7c1809dc74eb2f58a20595f4d02e76934f8e9219.camel@intel.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-14iio: hid: fix the retval in accel_3d_capture_sampleDmitry Perchanov1-0/+1
Return value should be zero for success. This was forgotten for timestamp feature. Verified on RealSense cameras. Fixes: a96cd0f901ee ("iio: accel: hid-sensor-accel-3d: Add timestamp") Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com> Link: https://lore.kernel.org/r/a6dc426498221c81fa71045b41adf782ebd42136.camel@intel.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-14iio: chemical: scd30_core: Switch to use dev_err_probe()Andy Shevchenko1-26/+14
Switch to use dev_err_probe() to simplify the error paths and unify message template. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230113141917.23725-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-14iio: chemical: scd30_core: use sysfs_emit() to instead of scnprintf()Andy Shevchenko1-3/+3
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230113141117.23353-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: adc: stm32-dfsdm: add id registers supportOlivier Moysan2-35/+124
Add support of identification registers to STM32 DFSDM to allow hardware capabilities discovery and configuration check. The number of filters and channels, are read from registers, when they are available. Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Link: https://lore.kernel.org/r/20230105125331.328275-1-olivier.moysan@foss.st.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: adc: qcom-spmi-adc5: define ADC5_BAT_ID_100K_PU channelLuca Weiss1-0/+2
Define the ADC channel used for battery identification purposes so it can be used in drivers. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20230106-pm7250b-bat_id-v1-1-82ca8f2db741@fairphone.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: magnetometer: st_magn: Add LSM303CStephan Gerhold5-1/+13
The magnetometer part of ST LSM303C is similar (perhaps even identical) to the already supported standalone LIS3MDL magnetometer, so just add the new st,lsm303c-magn compatible for the existing definitions. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230106102239.9647-4-stephan@gerhold.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: accel: st_accel: Add LSM303CStephan Gerhold5-1/+13
The accelerometer part of ST LSM303C is similar (perhaps even identical) to the already supported standalone LIS2HH12 accelerometer, so just add the new st,lsm303c-accel compatible for the existing definitions. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230106102239.9647-3-stephan@gerhold.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08drivers: iio: cdc: Drop redundant if checkAlexander Vorwerk1-2/+1
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexander Vorwerk <zabe@avorwerk.net> Link: https://lore.kernel.org/r/20230105025351.12099-1-zabe@avorwerk.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=mVladimir Oltean1-0/+1
The following kernel linkage error: st_lsm6dsx_core.o: in function `st_lsm6dsx_sw_buffers_setup': st_lsm6dsx_core.c:2578: undefined reference to `devm_iio_triggered_buffer_setup_ext' is caused by the fact that the object owning devm_iio_triggered_buffer_setup_ext() (drivers/iio/buffer/industrialio-triggered-buffer.o) is allowed to be built as module when its user (drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c) is built-in. The st_lsm6dsx driver already has a "select IIO_BUFFER", so add another select for IIO_TRIGGERED_BUFFER, to make that option follow what is set for the st_lsm6dsx driver. This is similar to what other iio drivers do. Fixes: 2cfb2180c3e8 ("iio: imu: st_lsm6dsx: introduce sw trigger support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230103130348.1733467-1-vladimir.oltean@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: adc: max11410: Use asm intead of asm-genericAndy Shevchenko1-1/+2
There is no point to specify asm-generic for the unaligned.h. Drop the 'generic' suffix and move the inclusion to be after the non-IIO linux/* ones. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230103144903.39905-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: adc: ti-adc128s052: Sort headersAndy Shevchenko1-3/+3
Sort the headers in alphabetic order in order to ease the maintenance for this part. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230102173450.29882-4-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: adc: ti-adc128s052: Drop anti-pattern of ACPI_PTR() useAndy Shevchenko1-4/+1
ACPI_PTR() is more harmful than helpful. For example, in this case if CONFIG_ACPI=n, the ID table left unused and code is obfuscated by ifdeffery. Drop anti-pattern of ACPI_PTR() use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230102173450.29882-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: adc: ti-adc128s052: Switch to use spi_get_device_match_data()Andy Shevchenko1-23/+20
The spi_get_device_match_data() helps to get driver data from the firmware node or SPI ID table. Use it instead of open coding. While at it, switch ID tables to provide an acrual pointers to the configuration data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230102173450.29882-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: adc: ep93xx: Enable wider build testing with COMPILE_TESTJonathan Cameron1-1/+2
It is useful to be able to build this driver without needing to build support for ARCH_EP93XX. Also add an explicit dependency on HAS_IOMEM so we have devm_platform_ioremap_resource() etc available. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20221231144128.489810-1-jic23@kernel.org
2022-12-30iio: adc: ep93xx: Add OF supportAlexander Sverdlin1-0/+8
Prepare for EP93xx conversion to DT. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20221223162636.6488-2-alexander.sverdlin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio:adc:twl6030: Enable measurement of VACAndreas Kemnade1-1/+1
VAC needs to be wired up to produce proper measurements, without this change only near zero values are reported. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Fixes: 1696f36482e7 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20221217221305.671117-1-andreas@kemnade.info Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: imu: fxos8700: fix ACCEL measurement range selectionCarlos Song1-7/+34
When device is in active mode, it fails to set an ACCEL full-scale range(2g/4g/8g) in FXOS8700_XYZ_DATA_CFG. This is not align with the datasheet, but it is a fxos8700 chip behavior. Keep the device in standby mode before setting ACCEL full-scale range into FXOS8700_XYZ_DATA_CFG in chip initialization phase and setting scale phase. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <carlos.song@nxp.com> Link: https://lore.kernel.org/r/20221208071911.2405922-6-carlos.song@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: imu: fxos8700: fix IMU data bits returned to user spaceCarlos Song1-1/+27
ACCEL output data registers contain the X-axis, Y-axis, and Z-axis 14-bit left-justified sample data and MAGN output data registers contain the X-axis, Y-axis, and Z-axis 16-bit sample data. The ACCEL raw register output data should be divided by 4 before sent to userspace. Apply a 2 bits signed right shift to the raw data from ACCEL output data register but keep that from MAGN sensor as the origin. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <carlos.song@nxp.com> Link: https://lore.kernel.org/r/20221208071911.2405922-5-carlos.song@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: imu: fxos8700: fix incomplete ACCEL and MAGN channels readbackCarlos Song1-1/+1
The length of ACCEL and MAGN 3-axis channels output data is 6 byte individually. However block only read 3 bytes data into buffer from ACCEL or MAGN output data registers every time. It causes an incomplete ACCEL and MAGN channels readback. Set correct value count for regmap_bulk_read to get 6 bytes ACCEL and MAGN channels readback. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <carlos.song@nxp.com> Link: https://lore.kernel.org/r/20221208071911.2405922-4-carlos.song@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-16 23:05:28 +0300