summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)AuthorFilesLines
2022-06-20Merge tag 'iio-fixes-for-5.19a' of ↵Greg Kroah-Hartman24-51/+91
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO fixes for the 5.19 cycle. Most of these have been in next for a long time. Unfortunately there was one stray patch in the branch (wasn't a fix), so I've just rebased to remove that. * testing - Fix a missing MODULE_LICENSE() warning by restricting possible build configs. * Various drivers - Fix ordering of iio_get_trigger() being called before iio_trigger_register() * adi,admv1014 - Fix dubious x & !y warning. * adi,axi-adc - Fix missing of_node_put() in error and normal paths. * aspeed,adc - Add missing of_node_put() * fsl,mma8452 - Fix broken probing from device tree. - Drop check on return value of i2c write to device to cause reset as ACK will be missing (device reset before sending it). * fsl,vf610 - Fix documentation of in_conversion_mode ABI. * iio-trig-sysfs - Ensure irq work has finished before freeing the trigger. * invensense,mpu3050 - Disable regulators in error path. * invensense,icm42600 - Fix collision of enum value of 0 with error path where 0 is no match. * renesas,rzg2l_Adc - Add missing fwnode_handle_put() in error path. * rescale - Fix a boolean logic bug for detection of raw + scale affecting an obscure corner case. * semtech,sx9324 - Check return value of read of pin_defs * st,stm32-adc: - Fix interaction across ADC instances for some supported devices. - Drop false spurious IRQ messages. - Fix calibration value handling. If we can't calibrate don't expose the vref_int channel. - Fix maximum clock rate for stm32pm15x * ti,ads131e08 - Add missing fwnode_handle_put() in error paths. * xilinx,ams - Fix variable checked for error from platform_get_irq() * x-powers,axp288 - Overide TS_PIN bias current for boards where it is not correctly initialized. * yamaha,yas530 - Fix inverted check on calibration data being all zeros. * tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits) iio:proximity:sx9324: Check ret value of device_property_read_u32_array() iio: accel: mma8452: ignore the return value of reset operation iio: adc: stm32: fix maximum clock rate for stm32mp15x iio: adc: stm32: fix vrefint wrong calibration value handling iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value) iio: adc: vf610: fix conversion mode sysfs node name iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m iio:humidity:hts221: rearrange iio trigger get and register iio:chemical:ccs811: rearrange iio trigger get and register iio:accel:mxc4005: rearrange iio trigger get and register iio:accel:kxcjk-1013: rearrange iio trigger get and register iio:accel:bma180: rearrange iio trigger get and register iio: afe: rescale: Fix boolean logic bug iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message iio: adc: stm32: Fix ADCs iteration in irq handler iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels() iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties() iio: trigger: sysfs: fix use-after-free on remove ...
2022-06-19iio:proximity:sx9324: Check ret value of device_property_read_u32_array()Aashish Sharma1-0/+3
0-day reports: drivers/iio/proximity/sx9324.c:868:3: warning: Value stored to 'ret' is never read [clang-analyzer-deadcode.DeadStores] Put an if condition to break out of switch if ret is non-zero. Signed-off-by: Aashish Sharma <shraash@google.com> Fixes: a8ee3b32f5da ("iio:proximity:sx9324: Add dt_binding support") Reported-by: kernel test robot <lkp@intel.com> [swboyd@chromium.org: Reword commit subject, add fixes tag] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20220613232224.2466278-1-swboyd@chromium.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: accel: mma8452: ignore the return value of reset operationHaibo Chen1-3/+7
On fxls8471, after set the reset bit, the device will reset immediately, will not give ACK. So ignore the return value of this reset operation, let the following code logic to check whether the reset operation works. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Fixes: ecabae713196 ("iio: mma8452: Initialise before activating") Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/1655292718-14287-1-git-send-email-haibo.chen@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: stm32: fix maximum clock rate for stm32mp15xOlivier Moysan1-1/+1
Change maximum STM32 ADC input clock rate to 36MHz, as specified in STM32MP15x datasheets. Fixes: d58c67d1d851 ("iio: adc: stm32-adc: add support for STM32MP1") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220609095234.375925-1-olivier.moysan@foss.st.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: stm32: fix vrefint wrong calibration value handlingOlivier Moysan1-10/+17
If the vrefint calibration is zero, the vrefint channel output value cannot be computed. Currently, in such case, the raw conversion value is returned, which is not relevant. Do not expose the vrefint channel when the output value cannot be computed, instead. Fixes: 0e346b2cfa85 ("iio: adc: stm32-adc: add vrefint calibration support") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220609095856.376961-1-olivier.moysan@foss.st.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)Jean-Baptiste Maneyrol2-1/+2
The 0 value used for INV_CHIP_ICM42600 was not working since the match in i2c/spi was checking against NULL value. To keep this check, add a first INV_CHIP_INVALID 0 value as safe guard. Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver") Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20220609102301.4794-1-jmaneyrol@invensense.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_clientMiaoqian Lin1-0/+3
of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: ef04070692a2 ("iio: adc: adi-axi-adc: add support for AXI ADC IP core") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220524074517.45268-1-linmq006@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=mLiam Beguin2-2/+2
When IIO_RESCALE_KUNIT_TEST=y and IIO_RESCALE=m, drivers/iio/afe/iio-rescale.o is built twice causing the MODULE_LICENSE() to be lost, as shown by: ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o Rework the build configuration to have the dependency specified in the Kconfig. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 8e74a48d17d5 ("iio: test: add basic tests for the iio-rescale driver") Signed-off-by: Liam Beguin <liambeguin@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20220601142138.3331278-1-liambeguin@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio:humidity:hts221: rearrange iio trigger get and registerDmitry Rokosov1-1/+4
IIO trigger interface function iio_trigger_get() should be called after iio_trigger_register() (or its devm analogue) strictly, because of iio_trigger_get() acquires module refcnt based on the trigger->owner pointer, which is initialized inside iio_trigger_register() to THIS_MODULE. If this call order is wrong, the next iio_trigger_put() (from sysfs callback or "delete module" path) will dereference "default" module refcnt, which is incorrect behaviour. Fixes: e4a70e3e7d84 ("iio: humidity: add support to hts221 rh/temp combo device") Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220524181150.9240-6-ddrokosov@sberdevices.ru Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio:chemical:ccs811: rearrange iio trigger get and registerDmitry Rokosov1-2/+2
IIO trigger interface function iio_trigger_get() should be called after iio_trigger_register() (or its devm analogue) strictly, because of iio_trigger_get() acquires module refcnt based on the trigger->owner pointer, which is initialized inside iio_trigger_register() to THIS_MODULE. If this call order is wrong, the next iio_trigger_put() (from sysfs callback or "delete module" path) will dereference "default" module refcnt, which is incorrect behaviour. Fixes: f1f065d7ac30 ("iio: chemical: ccs811: Add support for data ready trigger") Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220524181150.9240-5-ddrokosov@sberdevices.ru Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio:accel:mxc4005: rearrange iio trigger get and registerDmitry Rokosov1-2/+2
IIO trigger interface function iio_trigger_get() should be called after iio_trigger_register() (or its devm analogue) strictly, because of iio_trigger_get() acquires module refcnt based on the trigger->owner pointer, which is initialized inside iio_trigger_register() to THIS_MODULE. If this call order is wrong, the next iio_trigger_put() (from sysfs callback or "delete module" path) will dereference "default" module refcnt, which is incorrect behaviour. Fixes: 47196620c82f ("iio: mxc4005: add data ready trigger for mxc4005") Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220524181150.9240-4-ddrokosov@sberdevices.ru Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio:accel:kxcjk-1013: rearrange iio trigger get and registerDmitry Rokosov1-2/+2
IIO trigger interface function iio_trigger_get() should be called after iio_trigger_register() (or its devm analogue) strictly, because of iio_trigger_get() acquires module refcnt based on the trigger->owner pointer, which is initialized inside iio_trigger_register() to THIS_MODULE. If this call order is wrong, the next iio_trigger_put() (from sysfs callback or "delete module" path) will dereference "default" module refcnt, which is incorrect behaviour. Fixes: c1288b833881 ("iio: accel: kxcjk-1013: Increment ref counter for indio_dev->trig") Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220524181150.9240-3-ddrokosov@sberdevices.ru Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio:accel:bma180: rearrange iio trigger get and registerDmitry Rokosov1-1/+2
IIO trigger interface function iio_trigger_get() should be called after iio_trigger_register() (or its devm analogue) strictly, because of iio_trigger_get() acquires module refcnt based on the trigger->owner pointer, which is initialized inside iio_trigger_register() to THIS_MODULE. If this call order is wrong, the next iio_trigger_put() (from sysfs callback or "delete module" path) will dereference "default" module refcnt, which is incorrect behaviour. Fixes: 0668a4e4d297 ("iio: accel: bma180: Fix indio_dev->trig assignment") Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220524181150.9240-2-ddrokosov@sberdevices.ru Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: afe: rescale: Fix boolean logic bugLinus Walleij1-1/+1
When introducing support for processed channels I needed to invert the expression: if (!iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) || !iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE)) dev_err(dev, "source channel does not support raw/scale\n"); To the inverse, meaning detect when we can usse raw+scale rather than when we can not. This was the result: if (iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) || iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE)) dev_info(dev, "using raw+scale source channel\n"); Ooops. Spot the error. Yep old George Boole came up and bit me. That should be an &&. The current code "mostly works" because we have not run into systems supporting only raw but not scale or only scale but not raw, and I doubt there are few using the rescaler on anything such, but let's fix the logic. Cc: Liam Beguin <liambeguin@gmail.com> Cc: stable@vger.kernel.org Fixes: 53ebee949980 ("iio: afe: iio-rescale: Support processed channels") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Liam Beguin <liambeguin@gmail.com> Acked-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/20220524075448.140238-1-linus.walleij@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_dataMiaoqian Lin1-0/+1
of_find_node_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: d0a4c17b4073 ("iio: adc: aspeed: Get and set trimming data.") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220516075206.34580-1-linmq006@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs messageYannick Brosseau1-10/+0
The check for spurious IRQs introduced in 695e2f5c289bb assumed that the bits in the control and status registers are aligned. This is true for the H7 and MP1 version, but not the F4. The interrupt was then never handled on the F4. Instead of increasing the complexity of the comparison and check each bit specifically, we remove this check completely and rely on the generic handler for spurious IRQs. Fixes: 695e2f5c289b ("iio: adc: stm32-adc: fix a regression when using dma and irq") Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220516203939.3498673-3-yannick.brosseau@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: stm32: Fix ADCs iteration in irq handlerYannick Brosseau1-1/+6
The irq handler was only checking the mask for the first ADCs in the case of the F4 and H7 generation, since it was iterating up to the num_irq value. This patch add the maximum number of ADC in the common register, which map to the number of entries of eoc_msk and ovr_msk in stm32_adc_common_regs. This allow the handler to check all ADCs in that module. Tested on a STM32F429NIH6. Fixes: 695e2f5c289b ("iio: adc: stm32-adc: fix a regression when using dma and irq") Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220516203939.3498673-2-yannick.brosseau@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ↵Jialin Zhang1-3/+7
ads131e08_alloc_channels() fwnode_handle_put() should be used when terminating device_for_each_child_node() iteration with break or return to prevent stale device node references from being left behind. Fixes: d935eddd2799 ("iio: adc: Add driver for Texas Instruments ADS131E0x ADC family") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Link: https://lore.kernel.org/r/20220517033020.2033324-1-zhangjialin11@huawei.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: rzg2l_adc: add missing fwnode_handle_put() in ↵Jialin Zhang1-2/+6
rzg2l_adc_parse_properties() fwnode_handle_put() should be used when terminating device_for_each_child_node() iteration with break or return to prevent stale device node references from being left behind. Fixes: d484c21bacfa ("iio: adc: Add driver for Renesas RZ/G2L A/D converter") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220517033526.2035735-1-zhangjialin11@huawei.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: trigger: sysfs: fix use-after-free on removeVincent Whitchurch1-0/+1
Ensure that the irq_work has completed before the trigger is freed. ================================================================== BUG: KASAN: use-after-free in irq_work_run_list Read of size 8 at addr 0000000064702248 by task python3/25 Call Trace: irq_work_run_list irq_work_tick update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt Allocated by task 25: kmem_cache_alloc_trace iio_sysfs_trig_add dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write Freed by task 25: kfree iio_sysfs_trig_remove dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write ================================================================== Fixes: f38bc926d022 ("staging:iio:sysfs-trigger: Use irq_work to properly active trigger") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20220519091925.1053897-1-vincent.whitchurch@axis.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up()Zheyu Ma1-0/+1
The driver should disable regulators when fails at regmap_update_bits(). Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220510092431.1711284-1-zheyuma97@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: freq: admv1014: Fix warning about dubious x & !y and improve readabilityAntoniu Miclaus1-2/+4
The warning comes from __BF_FIELD_CHECK() specifically BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ? \ ~((_mask) >> __bf_shf(_mask)) & (_val) : 0, \ _pfx "value too large for the field"); \ The code was using !(enum value) which is not particularly easy to follow so replace that with explicit matching and use of ? 0 : 1; or ? 1 : 0; to improve readability. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220511090006.90502-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-05Merge tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linuxLinus Torvalds1-29/+19
Pull bitmap updates from Yury Norov: - bitmap: optimize bitmap_weight() usage, from me - lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro Carvalho Chehab - include/linux/find: Fix documentation, from Anna-Maria Behnsen - bitmap: fix conversion from/to fix-sized arrays, from me - bitmap: Fix return values to be unsigned, from Kees Cook It has been in linux-next for at least a week with no problems. * tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits) nodemask: Fix return values to be unsigned bitmap: Fix return values to be unsigned KVM: x86: hyper-v: replace bitmap_weight() with hweight64() KVM: x86: hyper-v: fix type of valid_bank_mask ia64: cleanup remove_siblinginfo() drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate lib/bitmap: add test for bitmap_{from,to}_arr64 lib: add bitmap_{from,to}_arr64 lib/bitmap: extend comment for bitmap_(from,to)_arr32() include/linux/find: Fix documentation lib/bitmap.c make bitmap_print_bitmask_to_buf parseable MAINTAINERS: add cpumask and nodemask files to BITMAP_API arch/x86: replace nodes_weight with nodes_empty where appropriate mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate clocksource: replace cpumask_weight with cpumask_empty in clocksource.c genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate irq: mips: replace cpumask_weight with cpumask_empty where appropriate drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate arch/x86: replace cpumask_weight with cpumask_empty where appropriate ...
2022-06-03Merge tag 'char-misc-5.19-rc1' of ↵Linus Torvalds103-769/+1493
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc / other smaller driver subsystem updates from Greg KH: "Here is the large set of char, misc, and other driver subsystem updates for 5.19-rc1. The merge request for this has been delayed as I wanted to get lots of linux-next testing due to some late arrivals of changes for the habannalabs driver. Highlights of this merge are: - habanalabs driver updates for new hardware types and fixes and other updates - IIO driver tree merge which includes loads of new IIO drivers and cleanups and additions - PHY driver tree merge with new drivers and small updates to existing ones - interconnect driver tree merge with fixes and updates - soundwire driver tree merge with some small fixes - coresight driver tree merge with small fixes and updates - mhi bus driver tree merge with lots of updates and new device support - firmware driver updates - fpga driver updates - lkdtm driver updates (with a merge conflict, more on that below) - extcon driver tree merge with small updates - lots of other tiny driver updates and fixes and cleanups, full details in the shortlog. All of these have been in linux-next for almost 2 weeks with no reported problems" * tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits) habanalabs: use separate structure info for each error collect data habanalabs: fix missing handle shift during mmap habanalabs: remove hdev from hl_ctx_get args habanalabs: do MMU prefetch as deferred work habanalabs: order memory manager messages habanalabs: return -EFAULT on copy_to_user error habanalabs: use NULL for eventfd habanalabs: update firmware header habanalabs: add support for notification via eventfd habanalabs: add topic to memory manager buffer habanalabs: handle race in driver fini habanalabs: add device memory scrub ability through debugfs habanalabs: use unified memory manager for CB flow habanalabs: unified memory manager new code for CB flow habanalabs/gaudi: set arbitration timeout to a high value habanalabs: add put by handle method to memory manager habanalabs: hide memory manager page shift habanalabs: Add separate poll interval value for protocol habanalabs: use get_task_pid() to take PID habanalabs: add prefetch flag to the MAP operation ...
2022-05-25Merge tag 'thermal-5.19-rc1' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These add a thermal library and thermal tools to wrap the netlink interface into event-based callbacks, improve overheat condition handling during suspend-to-idle on Intel SoCs, add some new hardware support, fix bugs and clean up code. Specifics: - Add thermal library and thermal tools to encapsulate the netlink into event based callbacks (Daniel Lezcano, Jiapeng Chong). - Improve overheat condition handling during suspend-to-idle in the Intel PCH thermal driver (Zhang Rui). - Use local ops instead of global ops in devfreq_cooling (Kant Fan). - Clean up _OSC handling in int340x (Davidlohr Bueso). - Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr() (Hesham Almatary). - Add new k3 j72xx bangdap driver and the corresponding bindings (Keerthy). - Fix missing of_node_put() in the SC iMX driver at probe time (Miaoqian Lin). - Fix memory leak in __thermal_cooling_device_register() when device_register() fails by calling thermal_cooling_device_destroy_sysfs() (Yang Yingliang). - Add sc8180x and sc8280xp compatible string in the DT bindings and lMH support for QCom tsens driver (Bjorn Andersson). - Fix OTP Calibration Register values conforming to the documentation on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das). - Fix type in kerneldoc description for __thermal_bind_params (Corentin Labbe). - Fix potential NULL dereference in sr_thermal_probe() on Broadcom platform (Zheng Yongjun). - Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu Pallikunhi). - Fix non-negative value support by preventing the value to be clamp to zero (Stefan Wahren). - Add compatible string and DT bindings for MSM8960 tsens driver (Dmitry Baryshkov). - Add hwmon support for K3 driver (Massimiliano Minella). - Refactor and add multiple generations support for QCom ADC driver (Jishnu Prakash). - Use platform_get_irq_optional() to get the interrupt on RCar driver and document Document RZ/V2L bindings (Lad Prabhakar). - Remove NULL check after container_of() call from the Intel HFI thermal driver (Haowen Bai)" * tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits) thermal: intel: pch: improve the cooling delay log thermal: intel: pch: enhance overheat handling thermal: intel: pch: move cooling delay to suspend_noirq phase PM: wakeup: expose pm_wakeup_pending to modules thermal: k3_j72xx_bandgap: Add the bandgap driver support dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe thermal/core: Fix memory leak in __thermal_cooling_device_register() dt-bindings: thermal: tsens: Add sc8280xp compatible dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible thermal/drivers/qcom/lmh: Add sc8180x compatible thermal/drivers/rz2gl: Fix OTP Calibration Register values dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings thermal: thermal_of: fix typo on __thermal_bind_params tools/thermal: remove unneeded semicolon tools/lib/thermal: remove unneeded semicolon thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe tools/thermal: Add thermal daemon skeleton tools/thermal: Add a temperature capture tool tools/thermal: Add util library ...
2022-05-23Merge branches 'pm-core', 'pm-sleep' and 'powercap'Rafael J. Wysocki4-11/+10
Merge PM core changes, updates related to system sleep and power capping updates for 5.19-rc1: - Export dev_pm_ops instead of suspend() and resume() in the IIO chemical scd30 driver (Jonathan Cameron). - Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and PM-runtime counterparts (Jonathan Cameron). - Move symbol exports in the IIO chemical scd30 driver into the IIO_SCD30 namespace (Jonathan Cameron). - Avoid device PM-runtime usage count underflows (Rafael Wysocki). - Allow dynamic debug to control printing of PM messages (David Cohen). - Fix some kernel-doc comments in hibernation code (Yang Li, Haowen Bai). - Preserve ACPI-table override during hibernation (Amadeusz Sławiński). - Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson). - Make Intel RAPL power capping driver support the RaptorLake and AlderLake N processors (Zhang Rui, Sumeet Pawnikar). - Remove redundant store to value after multiply in the RAPL power capping driver (Colin Ian King). * pm-core: PM: runtime: Avoid device usage count underflows iio: chemical: scd30: Move symbol exports into IIO_SCD30 namespace PM: core: Add NS varients of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and runtime pm equiv iio: chemical: scd30: Export dev_pm_ops instead of suspend() and resume() * pm-sleep: cpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI mode PM: runtime: Allow to call __pm_runtime_set_status() from atomic context PM: hibernate: Don't mark comment as kernel-doc x86/ACPI: Preserve ACPI-table override during hibernation PM: hibernate: Fix some kernel-doc comments PM: sleep: enable dynamic debug support within pm_pr_dbg() PM: sleep: Narrow down -DDEBUG on kernel/power/ files * powercap: powercap: intel_rapl: remove redundant store to value after multiply powercap: intel_rapl: add support for ALDERLAKE_N powercap: RAPL: Add Power Limit4 support for RaptorLake powercap: intel_rapl: add support for RaptorLake
2022-05-19Merge tag 'iio-for-5.19a' of ↵Greg Kroah-Hartman103-769/+1493
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: First set of IIO new device support, features and cleanup for 5.19 Usual mixed bag. Stand out this time is Andy Shevchenko's continuing effort to move drivers over the generic firmware interfaces. Device support * sprd,sc2720 - upm9620 binding addition. - Refactor and support for sc2720, sc2721 and sc2730. * ti,ads1015 - Refactor driver and add support for TLA2024. Device support (IDs only) * invensense,mpu6050 - Add ID for ICM-20608-D. * st,accel: - Add ID for lis302dl. * st,lsm6dsx - Add support for ASM330LHHX (can fallback to LSM6DSR.) Features * convert drivers to device properties - IIO core - adi,ad7266 - adi,adis16480 - adi,adxl355 - bosch,bmi160 - domintech,dmard06 - fsl,fxas21002c - invensense,mpu3050 - linear,ltc2983 - linear,ltc2632 - maxbotix,mb1232 - maxim,max31856 - maxim,max31865 - multiplexer - ping - rescale - taos,tsl2772 * core - Add runtime check on whether realbits fit in storagebits for each channel. * adi,ad_sigma_delta - Add sequencer support and relevant update_scan_mode callbacks for adi,ad7192 and adi,ad7124. Cleanup and minor fixes * MAINTAINERS - Update Lorenzo Bianconi's email address for IIO drivers. - Add entry for ad3552r and update maintainer in dt-binding doc. * tree-wide - Replace strtobool() with kstrtobool(). - Drop false OF dependencies. * core - Tidy up and document IIO modes. - Take iio_buffer_enabled() out of header allowing current_mode to be moved to the opaque structure. - As all kfifo buffers use the same mode value, drop that parameter and set it unconditionally. - White space fixes and similar. - Drop use of list iterator variable for list_for_each_entry_continue_reverse and use list_prepare_entry to restart. * sysfs-trigger - Replace use of 'found' variable with dedicate list iterator variable. * adi,ad7124 - Drop misleading shift. * adi,ad2s1210 - Remove redundant local variable assignment. * adi,adis16480 - Use local device pointer to reduce repetition. - Improve handling of clocks. * domintech,dmard09 - White space. * dummy driver - Improve error handling. * fsl,mma8452 - Add missing documentation of name element. * invensense,mpu3050 - Stop remove() returning non 0. * kionix,kxsd9 - White space. * linear,ltc2688 - Use local variable for struct device. - Combine of_node_put() error handling paths. * linear,ltc2983 - Avoid use of constants in messages where a define is available. * microchip,mcp4131 - Fix compatible in dt example. * pni,rm3100 - Stop directly accessing iio_dev->current_mode just to find out if the buffer is enabled. * renesas,rzg2l - Relax kconfig constraint to include newer devices. * sprd,sc27xx - Fix wrong scaling mask. - Improve the calibration values. * samsung,ssp - Replace a 'found' variable in favor of an explicit value that was found. * sensortek,stk3xx - Add proximity-near-level binding and driver support. * st,st_sensors: - Drop unused accel_type enum. - Return early in *_write_raw() - Drop unnecessary locking in _avail functions. - Add local lock to protect odr against concurrent updates allowing mlock to no longer be used outside of the core. - Use iio_device_claim_direct_mode() rather than racy checking of the current mode. * st,stmpe-adc - Fix checks on wait_for_completion_timeout(). - Allow use of of_device_id for matching. * st,stm32-dfsdm - Stop accessing iio_dev->current_mode to find out if the buffer is enabled (so we can hide that variable in the opaque structure) * st,vl53l0x - Fix checks on wait_for_completion_timeout. * ti,ads1015 - Add missing ID for ti,ads1115 in binding doc. - Convert from repeated chip ID look up to selecting static const data. - Switch to read_avail() callback. * ti,ads8688 - Use of_device_id for driver matching. * ti,palmas-adc - Drop a warning on minor calibration mismatch leading to slightly negative values after applying the calibration. * tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (95 commits) iio: ti-ads8688: use of_device_id for OF matching iio: stmpe-adc: use of_device_id for OF matching dt-bindings: iio: Fix incorrect compatible strings in examples iio: gyro: mpu3050: Make mpu3050_common_remove() return void iio: dac: ltc2632: Make use of device properties iio: temperature: max31865: Make use of device properties iio: proximity: mb1232: Switch to use fwnode_irq_get() iio: imu: adis16480: Improve getting the optional clocks iio: imu: adis16480: Use temporary variable for struct device iio: imu: adis16480: Make use of device properties staging: iio: ad2s1210: remove redundant assignment to variable negative iio: adc: sc27xx: add support for PMIC sc2730 iio: adc: sc27xx: add support for PMIC sc2720 and sc2721 iio: adc: sc27xx: refactor some functions for support more PMiCs iio: adc: sc27xx: structure adjustment and optimization iio: adc: sc27xx: Fine tune the scale calibration values iio: adc: sc27xx: fix read big scale voltage not right dt-bindings:iio:adc: add sprd,ump9620-adc dt-binding iio: proximity: stk3310: Export near level property for proximity sensor dt-bindings: iio: light: stk33xx: Add proximity-near-level ...
2022-05-19iio: adc: qcom-vadc-common: add reverse scaling for PMIC5 Gen2 ADC_TMJishnu Prakash1-0/+11
Add reverse scaling function for PMIC5 Gen2 ADC_TM, to convert temperature to raw ADC code, for setting thresholds for thermistor channels. Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/1648991869-20899-3-git-send-email-quic_jprakash@quicinc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-14iio: adc: xilinx-ams: fix return error variableLv Ruyi1-1/+1
Return irq instead of ret which always equals to zero here. Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver") Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-07iio: magnetometer: yas530: Fix memchr_inv() misuseLinus Walleij1-1/+1
The call to check if the calibration is all zeroes is doing it wrong: memchr_inv() returns NULL if the the calibration contains all zeroes, but the check is for != NULL. Fix it up. It's probably not an urgent fix because the inner check for BIT(7) in data[13] will save us. But fix it. Fixes: de8860b1ed47 ("iio: magnetometer: Add driver for Yamaha YAS530") Reported-by: Jakob Hauser <jahau@rocketmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220501195029.151852-1-linus.walleij@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-07iio: adc: axp288: Override TS pin bias current for some modelsHans de Goede1-0/+8
Since commit 9bcf15f75cac ("iio: adc: axp288: Fix TS-pin handling") we preserve the bias current set by the firmware at boot. This fixes issues we were seeing on various models. Some models like the Nuvision Solo 10 Draw tablet actually need the old hardcoded 80ųA bias current for battery temperature monitoring to work properly. Add a quirk entry for the Nuvision Solo 10 Draw to the DMI quirk table to restore setting the bias current to 80ųA on this model. Fixes: 9bcf15f75cac ("iio: adc: axp288: Fix TS-pin handling") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215882 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220506095040.21008-1-hdegoede@redhat.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-02iio: fix opencoded for_each_set_bit()Yury Norov1-29/+19
iio_simple_dummy_trigger_h() is mostly an opencoded for_each_set_bit(). Using for_each_set_bit() make code much cleaner, and more effective. Signed-off-by: Yury Norov <yury.norov@gmail.com>
2022-05-01iio: ti-ads8688: use of_device_id for OF matchingKrzysztof Kozlowski1-0/+1
The of_device_id was added to allow module autoloading, but it should be also used to allow driver matching via Devicetree. This also fixes W=1 warning: drivers/iio/adc/ti-ads8688.c:501:34: error: ‘ads8688_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220501103447.111392-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-01iio: stmpe-adc: use of_device_id for OF matchingKrzysztof Kozlowski1-6/+7
The of_device_id was added to allow module autoloading, but it should be also used to allow driver matching via Devicetree. This also fixes W=1 warning: drivers/iio/adc/stmpe-adc.c:357:34: error: ‘stmpe_adc_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220501103447.111392-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-01iio: gyro: mpu3050: Make mpu3050_common_remove() return voidUwe Kleine-König3-5/+5
This function (up to now) returns zero unconditionally, so there isn't any benefit of returning a value. Make it return void to be able to see at a glance that the return value of mpu3050_i2c_remove is always zero. This patch is a preparation for making i2c remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220425191735.59032-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-01iio: mma8452: fix probe fail when device tree compatible is used.Haibo Chen1-5/+7
Correct the logic for the probe. First check of_match_table, if not meet, then check i2c_driver.id_table. If both not meet, then return fail. Fixes: a47ac019e7e8 ("iio: mma8452: Fix probe failing when an i2c_device_id is used") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1650876060-17577-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: dac: ltc2632: Make use of device propertiesAndy Shevchenko1-3/+3
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220413192203.46704-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: temperature: max31865: Make use of device propertiesAndy Shevchenko1-1/+3
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Add mod_devicetable.h include. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220413185335.21743-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: proximity: mb1232: Switch to use fwnode_irq_get()Andy Shevchenko1-3/+5
We have OF-centric variant of fwnode_irq_get() in the driver. Replace it with a call to an agnostic implementation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andreas Klinger <ak@it-klinger.de> Link: https://lore.kernel.org/r/20220413183123.20292-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: imu: adis16480: Improve getting the optional clocksAndy Shevchenko1-16/+10
The extended clocks are optional and may not be present for some configurations supported by this driver. Nevertheless, in case the clock is provided but some error happens during its getting, that error handling should be done properly. Use devm_clk_get_optional() API and report possible errors using dev_err_probe() to handle properly -EPROBE_DEFER error. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Tested-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220414131559.24694-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: imu: adis16480: Use temporary variable for struct deviceAndy Shevchenko1-23/+23
Use temporary variable for struct device to make code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Tested-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220414131559.24694-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: imu: adis16480: Make use of device propertiesAndy Shevchenko1-13/+14
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Tested-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220414131559.24694-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: sc27xx: add support for PMIC sc2730Cixi Geng1-0/+116
sc2730 is the product of sc27xx series. Co-developed-by: Yuming Zhu <yuming.zhu1@unisoc.com> Signed-off-by: Yuming Zhu <yuming.zhu1@unisoc.com> Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Link: https://lore.kernel.org/r/20220419142458.884933-8-gengcixi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: sc27xx: add support for PMIC sc2720 and sc2721Cixi Geng1-2/+201
sc2720 and sc2721 is the product of sc27xx series. Co-developed-by: Yuming Zhu <yuming.zhu1@unisoc.com> Signed-off-by: Yuming Zhu <yuming.zhu1@unisoc.com> Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Link: https://lore.kernel.org/r/20220419142458.884933-7-gengcixi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: sc27xx: refactor some functions for support more PMiCsCixi Geng1-16/+40
Refactor the common adc_nvmem_cell_calib_data,adc_to_volt and call these in the origin sc27xx_adc_scale_calibration,sc27xx_adc_to_volt Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Link: https://lore.kernel.org/r/20220419142458.884933-6-gengcixi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: sc27xx: structure adjustment and optimizationCixi Geng1-15/+76
Introduce one variant device data structure to be compatible with SC2731 PMIC since it has different scale and ratio calculation and so on. also rename the SC27xx to SC2731 for some definition and function. Co-developed-by: Yuming Zhu <yuming.zhu1@unisoc.com> Signed-off-by: Yuming Zhu <yuming.zhu1@unisoc.com> Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Link: https://lore.kernel.org/r/20220419142458.884933-5-gengcixi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: sc27xx: Fine tune the scale calibration valuesCixi Geng1-8/+8
Small adjustment the scale calibration value for the sc2731, use new name sc2731_[big|small]_scale_graph_calib, and remove the origin [big|small]_scale_graph_calib struct for unused. Fixes: 8ba0dbfd07a35 (iio: adc: sc27xx: Add ADC scale calibration) Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Link: https://lore.kernel.org/r/20220419142458.884933-4-gengcixi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: sc27xx: fix read big scale voltage not rightCixi Geng1-2/+2
Fix wrong configuration value of SC27XX_ADC_SCALE_MASK and SC27XX_ADC_SCALE_SHIFT by spec documetation. Fixes: 5df362a6cf49c (iio: adc: Add Spreadtrum SC27XX PMICs ADC support) Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/20220419142458.884933-3-gengcixi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: proximity: stk3310: Export near level property for proximity sensorArnaud Ferraris1-0/+25
This makes the value from which an object should be considered "near" available to userspace. This hardware-dependent value should be set in the device-tree. Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com> Link: https://lore.kernel.org/r/20220420112540.91907-3-arnaud.ferraris@collabora.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: proximity: vl53l0x: Fix return value check of wait_for_completion_timeoutMiaoqian Lin1-4/+3
wait_for_completion_timeout() returns unsigned long not int. It returns 0 if timed out, and positive if completed. The check for <= 0 is ambiguous and should be == 0 here indicating timeout which is the only error case. Fixes: 3cef2e31b54b ("iio: proximity: vl53l0x: Add IRQ support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220412064210.10734-1-linmq006@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-31 13:58:11 +0300