summaryrefslogtreecommitdiff
path: root/drivers/input/mouse
AgeCommit message (Collapse)AuthorFilesLines
2018-10-27Merge branch 'for-linus' of ↵Linus Torvalds2-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just random driver fixups, nothing exiting" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - avoid using uninitialized variable when probing Input: xen-kbdfront - mark expected switch fall-through Input: atmel_mxt_ts - mark expected switch fall-through Input: cyapa - mark expected switch fall-throughs Input: wm97xx-ts - fix exit path Input: of_touchscreen - add support for touchscreen-min-x|y Input: Fix DIR-685 touchkeys MAINTAINERS entry Input: elants_i2c - use DMA safe i2c when possible Input: silead - try firmware reload after unsuccessful resume Input: st1232 - set INPUT_PROP_DIRECT property Input: xilinx_ps2 - convert to using %pOFn instead of device_node.name Input: atmel_mxt_ts - fix multiple <linux/property.h> includes Input: sun4i-lradc - convert to using %pOFn instead of device_node.name Input: pwm-vibrator - correct pwms in DT binding example
2018-10-22Merge branch 'next' into for-linusDmitry Torokhov2-5/+3
Prepare input updates for 4.20 merge window.
2018-10-20Merge branch 'for-linus' of ↵Greg Kroah-Hartman1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Dmitry writes: "Input updates for 4.19-rc8 Just an addition to elan touchpad driver ACPI table." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM
2018-10-19Input: synaptics - avoid using uninitialized variable when probingDmitry Torokhov1-3/+1
synaptics_detect() does not check whether sending commands to the device succeeds and instead relies on getting unique data from the device. Let's make sure we seed entire buffer with zeroes to make sure we will not use garbage on stack that just happen to be 0x47. Reported-by: syzbot+13cb3b01d0784e4ffc3f@syzkaller.appspotmail.com Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-15Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGMMikhail Nikiforov1-0/+1
Add ELAN061C to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15IGM. Signed-off-by: Mikhail Nikiforov <jackxviichaos@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-15Input: cyapa - mark expected switch fall-throughsGustavo A. R. Silva1-2/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the "Fallthrough state" commern with a proper "Fall through", which is what GCC is expecting to find. Addresses-Coverity-ID: 114758 ("Missing break in switch") Addresses-Coverity-ID: 114759 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-09-29Merge branch 'for-linus' of ↵Greg Kroah-Hartman1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Dmitry writes: "Input updates for v4.19-rc5 Just a few driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: uinput - allow for max == min during input_absinfo validation Input: elantech - enable middle button of touchpad on ThinkPad P72 Input: atakbd - fix Atari CapsLock behaviour Input: atakbd - fix Atari keymap Input: egalax_ts - add system wakeup support Input: gpio-keys - fix a documentation index issue
2018-09-19Input: elantech - enable middle button of touchpad on ThinkPad P72Aaron Ma1-0/+2
Adding 2 new touchpad IDs to support middle button support. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-19Merge branch 'for-linus' of ↵Linus Torvalds9-22/+11
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for Rohm BU21029 touch controller - new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free - updates to Atmel, eeti. pxrc and iforce drivers - assorted driver cleanups and fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) MAINTAINERS: Add PhoenixRC Flight Controller Adapter Input: do not use WARN() in input_alloc_absinfo() Input: mark expected switch fall-throughs Input: raydium_i2c_ts - use true and false for boolean values Input: evdev - switch to bitmap API Input: gpio-keys - switch to bitmap_zalloc() Input: elan_i2c_smbus - cast sizeof to int for comparison bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free() md: Avoid namespace collision with bitmap API dm: Avoid namespace collision with bitmap API Input: pm8941-pwrkey - add resin entry Input: pm8941-pwrkey - abstract register offsets and event code Input: iforce - reorganize joystick configuration lists Input: atmel_mxt_ts - move completion to after config crc is updated Input: atmel_mxt_ts - don't report zero pressure from T9 Input: atmel_mxt_ts - zero terminate config firmware file Input: atmel_mxt_ts - refactor config update code to add context struct Input: atmel_mxt_ts - config CRC may start at T71 Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE ...
2018-08-16Merge branch 'next' into for-linusDmitry Torokhov8-21/+10
Prepare input updates for 4.19 merge window.
2018-08-08Input: mark expected switch fall-throughsGustavo A. R. Silva5-2/+7
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-02Input: elan_i2c_smbus - cast sizeof to int for comparisonJulia Lawall1-1/+1
Comparing an int to a size, which is unsigned, causes the int to become unsigned, giving the wrong result. i2c_smbus_read_block_data can return the result of i2c_smbus_xfer, whih can return a negative error code. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ int x; expression e,e1; identifier f; @@ *x = f(...); ... when != x = e1 when != if (x < 0 || ...) { ... return ...; } *x < sizeof(e) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: appletouch - replace GFP_ATOMIC with GFP_KERNELJia-Ju Bai1-3/+3
atp_open(), atp_recover() and atp_resume() are never called in atomic context. They call usb_submit_urb() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a couple of new device IDs added to Elan i2c touchpad controller driver - another entry in i8042 reset quirk list * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Lenovo LaVie Z to the i8042 reset list Input: elan_i2c - add another ACPI ID for Lenovo Ideapad 330-15AST MAINTAINERS: Add file patterns for serio device tree bindings Input: elan_i2c - add ACPI ID for lenovo ideapad 330
2018-07-27Input: stop telling users to snail-mail VojtechDmitry Torokhov4-16/+0
I do not think Vojtech wants snail mail these days (and he mentioned that nobody has ever sent him snail mail), and the address is not even valid anymore, so let's remove snail-mail instructions from the sources. Acked-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-16Input: elan_i2c - add another ACPI ID for Lenovo Ideapad 330-15ASTKT Liao1-0/+1
Add ELAN0622 to ACPI mapping table to support Elan touchpad found in Ideapad 330-15AST. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Reported-by: Anant Shende <anantshende@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04Input: elan_i2c - add ACPI ID for lenovo ideapad 330Donald Shanty III1-0/+1
This allows Elan driver to bind to the touchpad found in Lenovo Ideapad 330 series laptops. Signed-off-by: Donald Shanty III <dshanty@protonmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-27Merge branch 'for-linus' of ↵Linus Torvalds5-11/+27
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - the main change is a fix for my brain-dead patch to PS/2 button reporting for some protocols that made it in 4.17 - there is a new driver for Spreadtum vibrator that I intended to send during merge window but ended up not sending the 2nd pull request. Given that this is a brand new driver we should not see regressions here - a fixup to Elantech PS/2 driver to avoid decoding errors on Thinkpad P52 - addition of few more ACPI IDs for Silead and Elan drivers - RMI4 is switched to using IRQ domain code instead of rolling its own implementation * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: psmouse - fix button reporting for basic protocols Input: xpad - fix GPD Win 2 controller name Input: elan_i2c_smbus - fix more potential stack buffer overflows Input: elan_i2c - add ELAN0618 (Lenovo v330 15IKB) ACPI ID Input: elantech - fix V4 report decoding for module with middle key Input: elantech - enable middle button of touchpads on ThinkPad P52 Input: do not assign new tracking ID when changing tool type Input: make input_report_slot_state() return boolean Input: synaptics-rmi4 - fix axis-swap behavior Input: synaptics-rmi4 - fix the error return code in rmi_probe_interrupts() Input: synaptics-rmi4 - convert irq distribution to irq_domain Input: silead - add MSSL0002 ACPI HID Input: goldfish_events - fix checkpatch warnings Input: add Spreadtrum vibrator driver
2018-06-27Input: psmouse - fix button reporting for basic protocolsDmitry Torokhov1-6/+6
The commit ba667650c568 ("Input: psmouse - clean up code") was pretty brain-dead and broke extra buttons reporting for variety of PS/2 mice: Genius, Thinkmouse and Intellimouse Explorer. We need to actually inspect the data coming from the device when reporting events. Fixes: ba667650c568 ("Input: psmouse - clean up code") Reported-by: Jiri Slaby <jslaby@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-22Input: elan_i2c_smbus - fix more potential stack buffer overflowsBen Hutchings3-3/+11
Commit 40f7090bb1b4 ("Input: elan_i2c_smbus - fix corrupted stack") fixed most of the functions using i2c_smbus_read_block_data() to allocate a buffer with the maximum block size. However three functions were left unchanged: * In elan_smbus_initialize(), increase the buffer size in the same way. * In elan_smbus_calibrate_result(), the buffer is provided by the caller (calibrate_store()), so introduce a bounce buffer. Also name the result buffer size. * In elan_smbus_get_report(), the buffer is provided by the caller but happens to be the right length. Add a compile-time assertion to ensure this remains the case. Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-22Input: elan_i2c - add ELAN0618 (Lenovo v330 15IKB) ACPI IDAlexandr Savca1-0/+1
Add ELAN0618 to the list of supported touchpads; this ID is used in Lenovo v330 15IKB devices. Signed-off-by: Alexandr Savca <alexandr.savca@saltedge.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-22Input: elantech - fix V4 report decoding for module with middle key???1-1/+1
Some touchpad has middle key and it will be indicated in bit 2 of packet[0]. We need to fix V4 formation's byte mask to prevent error decoding. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-22Input: elantech - enable middle button of touchpads on ThinkPad P52Aaron Ma1-1/+8
PNPID is better way to identify the type of touchpads. Enable middle button support on 2 types of touchpads on Lenovo P52. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-16docs: Fix some broken referencesMauro Carvalho Chehab2-4/+4
As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-13Merge branch 'ib/4.17-xen-kbdfront-runtime-config' into nextDmitry Torokhov2-11/+17
Bring in xen-kbdfront changes.
2018-06-04Input: elan_i2c - add ELAN0612 (Lenovo v330 14IKB) ACPI IDJohannes Wienke1-0/+1
Add ELAN0612 to the list of supported touchpads; this ID is used in Lenovo v330 14IKB devices. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199253 Signed-off-by: Johannes Wienke <languitar@semipol.de> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-04Merge branch 'next' into for-linusDmitry Torokhov9-180/+597
Prepare input updates for 4.18 merge window.
2018-05-24Merge tag 'v4.17-rc6' into nextDmitry Torokhov1-4/+22
Sync up with mainline to bring in Atmel controller changes for Caroline.
2018-05-24Input: psmouse-smbus - allow to control psmouse_deactivateBenjamin Tissoires4-5/+13
This seems to be Synaptics specific, as some Elan touchpads are not correctly switching to SMBus if we call deactivate before switching to SMBus on cold boot and on resume. Tested with the T480s Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-24Input: elantech - detect new ICs and setup Host Notify for themBenjamin Tissoires2-4/+22
New ICs are using a different scheme for the alternate bus parameter. Given that they are new and are only using either PS2 only or PS2 + SMBus Host Notify, we force those new ICs to use the SMBus solution for enhanced reporting. This allows the touchpad found on the Lenovo T480s to report 5 fingers every 8 ms, instead of having a limit of 2 every 8 ms. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-24Input: elantech - add support for SMBus devicesBenjamin Tissoires6-11/+246
Many of the Elantech devices are connected through PS/2 and a different bus (SMBus or plain I2C). To not break any existing device, we only enable SMBus based on a module parameter. If some laptops require the quirk to be set, we will have to rely on a list of PNPIds or MDI matching to individually expose those hardware over SMBus. the parameter mentioned above is elantech_smbus from the psmouse module. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-24Input: elantech - query the resolution in query_infoBenjamin Tissoires2-12/+17
The command ETP_RESOLUTION_QUERY also contains the bus information. It is better to fetch it once, while we are querying for device information. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-24Input: elantech - split device info into a separate structureBenjamin Tissoires2-124/+175
In preparation for SMBus device support, move static device information that we query form the touchpad upon initialization into separate structure. This will allow us to query the device without allocating memory first. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-24Input: elan_i2c - add trackstick reportBenjamin Tissoires1-3/+85
The Elan touchpads over I2C/SMBus also can handle a trackstick. Unfortunately, nothing tells us if the device supports trackstick (the information lies in the PS/2 node), so rely on device properties to determine whether to enable the trackstick node. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1313939 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: elan_i2c_smbus - fix corrupted stackBenjamin Tissoires1-11/+11
New ICs (like the one on the Lenovo T480s) answer to ETP_SMBUS_IAP_VERSION_CMD 4 bytes instead of 3. This corrupts the stack as i2c_smbus_read_block_data() uses the values returned by the i2c device to know how many data it need to return. i2c_smbus_read_block_data() can read up to 32 bytes (I2C_SMBUS_BLOCK_MAX) and there is no safeguard on how many bytes are provided in the return value. Ensure we always have enough space for any future firmware. Also 0-initialize the values to prevent any access to uninitialized memory. Cc: <stable@vger.kernel.org> # v4.4.x, v4.9.x, v4.14.x, v4.15.x, v4.16.x Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: synaptics - add Lenovo 80 series ids to SMBusBenjamin Tissoires1-0/+2
This time, Lenovo decided to go with different pieces in its latest series of Thinkpads. For those we have been able to test: - the T480 is using Synaptics with an IBM trackpoint -> it behaves properly with or without intertouch, there is no point not using RMI4 - the X1 Carbon 6th gen is using Synaptics with an IBM trackpoint -> the touchpad doesn't behave properly under PS/2 so we have to switch it to RMI4 if we do not want to have disappointed users - the X280 is using Synaptics with an ALPS trackpoint -> the recent fixes in the trackpoint handling fixed it so upstream now works fine with or without RMI4, and there is no point not using RMI4 - the T480s is using an Elan touchpad, so that's a different story Cc: <stable@vger.kernel.org> # v4.14.x, v4.15.x, v4.16.x Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: synaptics - add Intertouch support on X1 Carbon 6th and X280Aaron Ma1-0/+2
Synaptics devices reported it has Intertouch support, and it fails via PS/2 as following logs: psmouse serio2: Failed to reset mouse on synaptics-pt/serio0 psmouse serio2: Failed to enable mouse on synaptics-pt/serio0 Set these new devices to use SMBus to fix this issue, then they report SMBus version 3 is using, patch: https://patchwork.kernel.org/patch/9989547/ enabled SMBus ver 3 and makes synaptics devices work fine on SMBus mode. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: synaptics - Lenovo Thinkpad X1 Carbon G5 (2017) with Elantech ↵Edvard Holst1-0/+1
trackpoints should use RMI Lenovo use two different trackpoints in the fifth generation Thinkpad X1 Carbon. Both are accessible over SMBUS/RMI but the pnpIDs are missing. This patch is for the Elantech trackpoint specifically which also reports SMB version 3 so rmi_smbus needs to be updated in order to handle it. For the record, I was not the first one to come up with this patch as it has been floating around the internet for a while now. However, I have spent significant time with testing and my efforts to find the original author of the patch have been unsuccessful. Signed-off-by: Edvard Holst <edvard.holst@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: synaptics - Lenovo Carbon X1 Gen5 (2017) devices should use RMIDmitry Torokhov1-0/+1
The touchpad on Lenovo Carbon X1 Gen 5 (2017 - Kabylake) is accessible over SMBUS/RMI, so let's activate it by default. Cc: stable@vger.kernel.org Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-24Input: alps - fix reporting pressure of v3 trackstickPali Rohár1-1/+1
According to documentation, all 7 lower bits represents trackpoint pressure. Fixes: 4621c9660459 ("Input: alps - report pressure of v3 and v7 trackstick") Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-24Input: alps - demystify trackstick initialization for v3 and v6 protocolsPali Rohár1-31/+49
Remove cite "Not sure what this does, but it is absolutely essential". Extract initialization of trackstick part when touchpad is in passthrough mode for v3 and v6 protocols into own function. Initialization for v3 is: setscale11, setscale11, setscale11, nibble 0x9, nibble 0x4. Initialization for v6 is: setscale11, setscale11, setscale11, setrate 0xC8, setrate 0x14. Nibbles 0x9 and 0x4 for v3 protocol correspond to setrate 0xC8 and 0x14, therefore these sequences are same. When touchpad is in passthrough mode, then OS communicates with trackstick and this sequence is some magic vendor PS/2 command to put trackstick into "extended" mode. After that sequence trackstick starts reporting packets in some vendor 4 bytes format (first byte is always 0xE8). Next step after configuring trackstick to be in "extended" mode, is to configure touchpad for v3 protocol to expect that trackstick reports data in "extended" mode. For v3 protocol this is done by setting bit 1 in register 0xC2C8 (offset 0x08 from base address 0xC2C0). When both touchpad and trackstick are not configured for "extended" mode then touchpad reports trackstick packets in different format, which is not supported by psmouse/alps driver (yet). In Cirque documentation GP-AN- 130823 INTERFACING TO GEN4 OVER I2C (PDF) available at http://www.cirque.com/gen4-dev-resources is Logical Address 0xC2C8 named as PS2AuxControl and Bit Number 1 as ProcessAuxExtendedData with description: Auxiliary device data is assumed to be extended data when set. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-24Merge branch 'ib-chrome-platform-input-atmel-mx-ts-platform-removal' of ↵Dmitry Torokhov1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform into next Sync up with chrome-platform to bring in changes to Atmel touch controller.
2018-04-05Merge branch 'next' into for-linusDmitry Torokhov12-337/+359
Prepare input updates for 4.17 merge window.
2018-03-31Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370Masaki Ota1-3/+21
The primary interface for the touchpad device in Thinkpad L570 is SMBus, so ALPS overlooked PS2 interface Firmware setting of TrackStick, and shipped with TrackStick otp bit is disabled. The address 0xD7 contains device number information, so we can identify the device by checking this value, but to access it we need to enable Command mode, and then re-enable the device. Devices shipped in Thinkpad L570 report either 0x0C or 0x1D as device numbers, if we see them we assume that the devices are DualPoints. The same issue exists on Dell Latitude 7370. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196929 Fixes: 646580f793 ("Input: ALPS - fix multi-touch decoding on SS4 plus touchpads") Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com> Tested-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Jonathan Liu <net147@gmail.com> Tested-by: Jaak Ristioja <jaak@ristioja.ee> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-27Input: alps - report pressure of v3 and v7 trackstickPali Rohár1-4/+6
ALPS v3 and v7 packet formats reports trackstick pressure. This information is already parsed in unused "z" variable. ALPS SS4 S2 devices already reports trackstick pressure as ABS_PRESSURE attribute, therefore reports pressure in the same way also for v3 and v7. This patch also updates parsing v3 pressure information, it is also stored in 7 bits. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-17Input: synaptics_usb - do not rely on input_dev->usersMarcus Folkesson1-4/+5
If the device is unused and suspended, a call to open will cause the device to autoresume through the call to usb_autopm_get_interface(). input_dev->users is already incremented by the input subsystem, therefore this expression will always be evaluated to true: if ((input_dev->users || (synusb->flags & SYNUSB_IO_ALWAYS)) && usb_submit_urb(synusb->urb, GFP_NOIO) < 0) { retval = -EIO; } The same URB will then be fail when resubmitted in synusb_open(). Introduce synusb->is_open to keep track of the state instead. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-17Input: synaptics_usb - fix deadlock in autosuspendMarcus Folkesson1-8/+14
usb_autopm_get_interface() that is called in synusb_open() does an autoresume if the device is suspended. input_dev->mutex used in synusb_resume() is in this case already taken by the input subsystem and will cause a deadlock. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-17Merge branch 'psmouse' into nextDmitry Torokhov9-278/+279
Merge various PS/2 handling improvements.
2018-03-14Input: appletouch - use true and false for boolean valuesGustavo A. R. Silva1-3/+3
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-08Merge branch 'for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - we are reverting patch that was switched touchpad on Lenovo T460P over to native RMI because on these boxes BIOS messes up with SMBus controller state. We might re-enable it later once SMBus issue is resolved - disabling interrupts in matrix_keypad driver was racy - mms114 now has SPDX header and matching MODULE_LICENSE * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI" Input: matrix_keypad - fix race when disabling interrupts Input: mms114 - add SPDX identifier Input: mms114 - fix license module information
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-16 01:42:15 +0300