summaryrefslogtreecommitdiff
path: root/drivers/input/tablet/wacom_sys.c
AgeCommit message (Collapse)AuthorFilesLines
2014-07-26Input: wacom - move the USB (now hid) Wacom driver in drivers/hidBenjamin Tissoires1-1257/+0
wacom.ko is now a full HID driver, we have to move it into the proper subdirectory: drivers/hid. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - use hidinput_calc_abs_res instead of duplicating its codeBenjamin Tissoires1-39/+9
This may infer a small difference with the previous implementation due to the DIV_ROUND_CLOSEST() in the hid implementation. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - use in-kernel HID parserBenjamin Tissoires1-236/+112
HID already parses the report descriptor, so use it instead of implementing our own. The special case for Bamboo PT 3rd gen is also removed and handled in the same way Intuos 5 is treated, by hardcoding it in the driver. Last, the unit_exponent stored into the hid field already is signed, so there is no need to handle a two's complement anymore. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - use hid_info instead of plain dev_infoBenjamin Tissoires1-5/+3
Removes one more need of usb and intf. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - register power device at the HID levelBenjamin Tissoires1-2/+2
Use the HID device as the parent for the power device when dealing with a wireless receiver. Removes one more usb dependency and does not break user space. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - remove usb dependency for siblings devicesBenjamin Tissoires1-39/+37
Wacom tablets can share different physical sensors on one physical device. These are called siblings in the code. The current way of implementation relies on the USB topology to be able to share data amongs those sensors. We can replace the code to match a HID subsystem, without involving the USB topology: - the first probed sensor does not find any siblings in the list wacom_udev_list, so it creates its own wacom_hdev_data with its own struct hid_device - the other sensor checks the current list of siblings in wacom_hdev_data, and if there is a match, it associates itself to the matched device. To be sure that we are not associating different sensors from different physical devices, we also check for the phys path of the hid device which contains the USB topology. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - register the input devices on top of the HID oneBenjamin Tissoires1-7/+8
Matches the current behavior of the HID subsystem and removes one more dependency over USB. The current user space clients which relies on this to fetch the LEDs path need an update. However, we already break them in the kernel v3.11 for the Bluetooth Wacom devices. They are going to be fixed soon. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - install LED/OLED sysfs files in the HID device instead of USBBenjamin Tissoires1-11/+11
Removes one more dependency over USB, but requires some changes in the user space to find the sysfs files correctly. This patch breaks the user space. However, the number of program accessing the LEDs is quite limited and we can easily patch them to handle the new HID behavior. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - compute the HID report size to get the actual packet sizeBenjamin Tissoires1-32/+26
This removes an USB dependency and is more accurate: the computed pktlen is the actual maximum size of the reports forwarded by the device. Given that the pktlen is correctly computed/validated, we can store it now in the features struct instead of having a special handling in the rest of the code. Likewise, this information is not mandatory anymore in the description of devices in wacom_wac.c. They will be removed in a separate patch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - use HID core to actually fetch the report descriptorBenjamin Tissoires1-60/+10
HID core already retrieves the report descritor. There is no need to ask ourself for one. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - use hid communication instead of plain usbBenjamin Tissoires1-45/+36
Wacom.ko was a plain USB driver for a HID device. The communications from/to the devices can actually be replaced with the HID API. At the USB level, the reports are exactly the same. This will allow to use uhid virtual devices instead of true USB devices. This step is necessary to implement regression tests. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - switch from an USB driver to a HID driverBenjamin Tissoires1-141/+81
All USB Wacom tablets are actually HID devices. For historical reasons, they are handled as plain USB devices. The current code makes more and more reference to the HID subsystem like implementing its own HID report descriptor parser to handle new devices. From the user point of view, we can transparently switch from this state to a driver handled in the HID subsystem and clean up a lot of USB specific code in the wacom.ko driver. The other benefit once the USB dependecies have been removed is that we can use a tool like uhid to make regression tests and allow further cleanup or new implementations without risking breaking current behaviors. To match the current handling of devices in wacom_wac.c, we rely on the hid_type set by usbhid. usbhid sets the hid_type to HID_TYPE_USBMOUSE when it sees a USB boot mouse protocol declared and HID_TYPE_USBNONE when the device is plain HID. There is thus a one to one matching between the list of supported devices before and after the switch from USB to HID. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - include and use linux/hid.hBenjamin Tissoires1-31/+22
The current wacom code redefines constants that are already in linux/hid.h This patch includes the official implementation and use it accross the code. There is a conflict with HID_USAGE and others at the same level: - in the wacom.ko implementation, those are the #define regarding the value of the field in the report descriptor - in the hid.h, those are bitmask So add HDESC_ in their current definition. Also, the struct hid_descriptor slightly differs from the linux/hid.h point of view, so mark it as custom for this driver. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - split out the pad device for the wireless receiverBenjamin Tissoires1-23/+23
The Wireless Receiver should also behave in the same way than regular USB devices. To simplify the unregistering of the different devices, wacom_unregister_inputs() is introduced. For consistency, the function wacom_register_input() is renamed into wacom_register_inputs(). Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - create a separate input device for padsBenjamin Tissoires1-8/+55
Currently, the pad events are sent through the stylus input device for the Intuos/Cintiqs, and through the touch input device for the Bamboos. To differentiate the buttons pressed on the pad from the ones pressed on the stylus, the Intuos/Cintiq uses MISC_SERIAL and ABS_MISC. This lead to a multiplexing of the events into one device, which are then splitted out in xf86-input-wacom. Bamboos are not using MISC events because the pad is attached to the touch interface, and only BTN_TOUCH is used for the finger (and DOUBLE_TAP, etc...). However, the user space driver still splits out the pad from the touch interface in the same way it does for the pro line devices. The other problem we can see with this fact is that some of the Intuos and Cintiq have a wheel, and the effective range of the reported values is [0..71]. Unfortunately, the airbrush stylus also sends wheel events (there is a small wheel on it), but in the range [0..1023]. From the user space point of view it is kind of difficult to understand that because the wheel on the pad are quite common, while the airbrush tool is not. A solution to fix all of these problems is to split out the pad device from the stylus/touch. This decision makes more sense because the pad is not linked to the absolute position of the finger or pen, and usually, the events from the pad are filtered out by the compositor, which then convert them into actions or keyboard shortcuts. For backward compatibility with current xf86-input-wacom, the pad devices still present the ABS_X, ABS_Y and ABS_MISC events, but they can be completely ignored in the new implementation. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: wacom - assign phys field from struct wacom into input_devBenjamin Tissoires1-0/+1
This field was not used for 9 years, it is time to assign it. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: Revert "wacom - testing result shows get_report is unnecessary."Benjamin Tissoires1-0/+3
This reverts commit 1b2faaf7e219fc2905d75afcd4c815e5d39eda80. The Intuos4 series presents a bug in which it hangs if it receives a set feature command while switching to the enhanced mode. This bug is triggered when plugging an Intuos 4 while having a gnome user session up and running. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-15Input: wacom - add support for three new ISDv4 sensorsJason Gerecke1-0/+19
This patch adds support for the 0x4004, 0x5000, and 0x5002 sensors found on what should be the Motion R12, Fujitsu Q704, and Fujitsu T904. These tablets use a new report ID (3) for their touch packets and a slightly different HID descriptor format, but are otherwise largely identical in protocol to the "MTTPC" tablets. Note: * The R12 uses its 0x4004 sensor for touch input only. A pen interface is not present in its HID descriptor, though its possible a 0x4004 may be used for pen input by other tablet PCs in the future. * The 0x5002 sensor appears to use a new report ID (8) for its pen packets. The other sensors continue to use the traditional report ID (2). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-20Input: wacom - override 'pressure_max' with value from HID_USAGE_PRESSUREJason Gerecke1-0/+9
The 0xEC sensor is used in multiple tablet PCs and curiously has versions that report 256 levels of pressure (Samsung Slate 7) as well as versions that report 1024 levels (Lenovo Thinkpad Yoga). To allow both versions to work properly, we allow the value of HID_USAGE_PRESSURE reported to override pressure_max. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com> Reviewed-by: Carl Worth <cworth@cworth.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-20Input: wacom - use full 32-bit HID Usage value in switch statementJason Gerecke1-128/+109
A HID Usage is a 32-bit value: an upper 16-bit "page" and a lower 16-bit ID. While the two halves are normally reported seperately, only the combination uniquely idenfifes a particular HID Usage. The existing code performs the comparison in two steps, first performing a switch on the ID and then verifying the page within each case. While this works fine, it is very akward to handle two Usages that share a single ID, such as HID_USAGE_PRESSURE and HID_USAGE_X because the case statement can only have a single identifier. To work around this, we now check the full 32-bit HID Usage directly rather than first checking the ID and then the page. This allows the switch statement to have distinct cases for e.g. HID_USAGE_PRESSURE and HID_USAGE_X. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com> Reviewed-by: Carl Worth <cworth@cworth.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-16Input: wacom - add reporting of SW_MUTE_DEVICE eventsPing Cheng1-0/+12
New Intuos series models added a hardware switch to turn touch data on/off. The state of the switch is reported periodically from the tablet. To report the state the driver will emit SW_MUTE_DEVICE events. Reviewed_by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-16Merge tag 'v3.13-rc4' into nextDmitry Torokhov1-0/+4
Synchronize with mainline to bring in the new keycode definitions and new hwmon API.
2013-11-26Input: wacom - add support for three new Intuos devicesPing Cheng1-3/+3
Two tablets in this series support both pen and touch. One (Intuos S) only supports pen. This patch also updates the driver to process wireless devices that do not support touch interface. Tested-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-26Input: wacom - make sure touch_max is set for touch devicesPing Cheng1-2/+5
Old single touch Tablet PCs do not have touch_max set at wacom_features. Since touch device at lease supports one finger, assign touch_max to 1 when touch usage is defined in its HID Descriptor and touch_max is not pre-defined. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-15Merge branch 'next' into for-linusDmitry Torokhov1-37/+59
Merge first round of changes for 3.13 merge window.
2013-10-23Input: wacom - not all multi-interface devices support touchPing Cheng1-21/+36
Some multi-interface devices support expresskeys on a separate interface, such as Bamboo; some multi-interface devices do not support touch at all, such as Pen only Intuos5. Make sure we report the right device names. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-16Input: wacom - export battery scopeBastien Nocera1-0/+4
This will stop UPower from detecting the tablet as a power supply, and using its battery status to hibernate or switch off the machine. https://bugs.freedesktop.org/show_bug.cgi?id=70321 Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-09-20Input: wacom - add support for three new Intuos Pro devicesPing Cheng1-2/+8
Acked-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-09-20Input: wacom - LED is only supported through digitizer interfacePing Cheng1-10/+14
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-09-20Input: wacom - testing result shows get_report is unnecessary.Ping Cheng1-3/+0
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-09-20Input: wacom - support EMR and MFT sensors of Cintiq Companion HybridJason Gerecke1-1/+1
Adds support for the sensors integrated in to the Cintiq Companion Hybrid. These sensors use by-and-large the same protocol as the Cintiq 24HD touch. NOTE: The ExpressKeys on the Cintiq Companion Hybrid are wired to both the EMR controller and CPU GPIO pins. It may be necessary to disable their functionality in this driver if building a custom Android kernel for this device (lest two events be sent to userspace for every button press). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-25Input: wacom - fix error return code in wacom_probe()Wei Yongjun1-3/+5
Fix to return a negative error code from the urb submit error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-13Input: wacom - integrate resolution calculationPing Cheng1-42/+37
Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-24Input: wacom - fix wacom_set_report retry logicChris Bagwell1-3/+3
Logic sets a value and then reads it back to make sure it worked and retries write on failures. Since read and write share a buffer, it needs to be set back up before writing though. Issue is not seen a lot because 1) it doesn't need to retry for a lot of tablets and 2) a lot of failures that need a retry are from an -ETIMEDOUT and hopefully buffer is not touched in this case. At least one user has shown logs with buffer being modified during -ETIMEDOUT case with linux 3.7 kernel. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-08Input: wacom - add support for 2 new multi-touch tablets (0x100 and 0x101)Ping Cheng1-0/+5
This adds support for the two new multi-touch tablets. Signed-off-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-08Input: wacom - clean up device type codePing Cheng1-15/+38
Use switch instead of if statement to verify device types Signed-off-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30Input: wacom - correct bad Cintiq 24HD checkJason Gerecke1-1/+1
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-26Input: wacom - add touch sensor support for Cintiq 24HD touchJason Gerecke1-1/+18
Decode multitouch reports from the touch sensor of the Cintiq 24HD touch. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-26Input: wacom - handle split-sensor devices with internal hubsJason Gerecke1-1/+31
Like our other pen-and-touch products, the Cintiq 24HD touch needs data to be shared between its two sensors to facilitate proximity-based palm rejection. Unlike other tablets that report sensor data through separate interfaces of the same USB device, the Cintiq 24HD touch has separate USB devices that are connected to an internal USB hub. This patch makes it possible to designate the USB VID/PID of the other device so that the two may share data. To ensure we don't accidentally link to a sensor from a physically separate device (if several have been plugged in), we limit the search to siblings (i.e., devices directly connected to the same hub). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-05Input: wacom - clean up wacom_query_tablet_dataJason Gerecke1-39/+35
Rewrites this function to be easier to read and understand. The new function 'wacom_set_device_mode' now handles the grunt work of assembling the proper feature report, sending it to the device, and ensuring the setting "sticks". Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-05Input: wacom - introduce wacom_fix_phy_from_hidJason Gerecke1-0/+71
The Cintiq 24HD touch cannot use wacom_set_phy_from_res to determine the physical size of the touch sensor since the pen and touch are on separate USB devices. The physical size is, however, provided in the HID descriptor, just scaled to a unit we don't use. This patch introduces the function wacom_fix_phy_from_hid to let us make use of the unit and exponent data provided by HID to set the [xy]_phy variables to an appropriate value. This function relies on a trimmed-down version of hidinput_calc_abs_res from the hid-input.c. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-08Merge branch 'for-linus' to bring in change ensuring that drivers thatDmitry Torokhov1-2/+4
use threaded IRQs use IRQF_ONESHOT.
2012-07-05Merge commit 'v3.5-rc5' into nextDmitry Torokhov1-4/+7
2012-06-29Input: wacom - don't retrieve touch_max when it is predefinedPing Cheng1-1/+3
Some models, such as 0xE6, report more fingers than we process. Reported-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Tested-by: Nils Kanning <nils@kanning.de> Tested-by: Rafi Rubin <rafi@seas.upenn.edu> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-06-29Input: wacom - fix retrieving touch_max bugPing Cheng1-1/+1
rep_data is not an array anymore, so taking it's address when passing to wacom_get_report() is wrong. Signed-off-by: Ping Cheng <pingc@wacom.com> Tested-by: Rafi Rubin <rafi@seas.upenn.edu> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-06-29Input: wacom - BTN_TOOL_DOUBLETAP is not a valid device_typePing Cheng1-1/+1
It is replaced by BTN_TOOL_FINGER. Signed-off-by: Ping Cheng <pingc@wacom.com> Tested-by: Rafi Rubin <rafi@seas.upenn.edu> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-06-12Input: wacom - remove code duplicationJason Gerecke1-4/+1
Replaces code to calculate Intuos5 physical dimensions with a call to an existing function that performs the same task. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-06-12Input: wacom - initialize and destroy LEDs for Intuos4 S tabletsJason Gerecke1-0/+2
This case appears to have been missed in the original commit. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-06-12Input: wacom - battery reporting improvementsChris Bagwell1-29/+53
Do not register battery device until connected to a tablet. This prevents an empty battery icon from being shown when tablet is connected using USB cable. Also, call power_supply_powers() for apps that can make use of that info. And stop ignoring input registration failures. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-06-12Input: wacom - rearrange type enumPing Cheng1-7/+3
So we can simplify a few type related if statements Signed-off-by: Ping Cheng <pingc@wacom.com> Acked-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-28 03:09:57 +0300