summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2024-03-08Input: synaptics-rmi4 - fix UAF of IRQ domain on driver removalMathias Krause1-3/+3
Calling irq_domain_remove() will lead to freeing the IRQ domain prematurely. The domain is still referenced and will be attempted to get used via rmi_free_function_list() -> rmi_unregister_function() -> irq_dispose_mapping() -> irq_get_irq_data()'s ->domain pointer. With PaX's MEMORY_SANITIZE this will lead to an access fault when attempting to dereference embedded pointers, as in Torsten's report that was faulting on the 'domain->ops->unmap' test. Fix this by releasing the IRQ domain only after all related IRQs have been deactivated. Fixes: 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain") Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by: Mathias Krause <minipli@grsecurity.net> Link: https://lore.kernel.org/r/20240222142654.856566-1-minipli@grsecurity.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-07Input: iqs7222 - add support for IQS7222D v1.1 and v1.2Jeff LaBundy1-0/+112
The vendor has introduced two new revisions with slightly different memory maps; update the driver to support them. Fixes: dd24e202ac72 ("Input: iqs7222 - add support for Azoteq IQS7222D") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/ZelTRYX3fenMQuhF@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-05Input: gpio_keys_polled - suppress deferred probe error for gpioUwe Kleine-König1-6/+4
On a PC Engines APU our admins are faced with: $ dmesg | grep -c "gpio-keys-polled gpio-keys-polled: unable to claim gpio 0, err=-517" 261 Such a message always appears when e.g. a new USB device is plugged in. Suppress this message which considerably clutters the kernel log for EPROBE_DEFER (i.e. -517). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240305101042.10953-2-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-05Revert "Input: bcm5974 - check endpoint type before starting traffic"Javier Carrasco1-20/+0
This patch intended to fix an well-knonw issue in old drivers where the endpoint type is taken for granted, which is often triggered by fuzzers. That was the case for this driver [1], and although the fix seems to be correct, it uncovered another issue that leads to a regression [2], if the endpoints of the current interface are checked. The driver makes use of endpoints that belong to a different interface rather than the one it binds (it binds to the third interface, but also accesses an endpoint from a different one). The driver should claim the interfaces it requires, but that is still not the case. Given that the regression is more severe than the issue found by syzkaller, the best approach is reverting the patch that causes the regression, and trying to fix the underlying problem before checking the endpoint types again. Note that reverting this patch will probably trigger the syzkaller bug at some point. This reverts commit 2b9c3eb32a699acdd4784d6b93743271b4970899. Link: https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622 [1] Link: https://lore.kernel.org/linux-input/87sf161jjc.wl-tiwai@suse.de/ [2] Fixes: 2b9c3eb32a69 ("Input: bcm5974 - check endpoint type before starting traffic") Reported-by: Jacopo Radice <jacopo.radice@outlook.com> Closes: https://bugzilla.suse.com/show_bug.cgi?id=1220030 Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20240305-revert_bcm5974_ep_check-v3-1-527198cf6499@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-04Input: serio - make serio_bus constRicardo B. Marliere1-1/+1
Now that the driver core can properly handle constant struct bus_type, move the serio_bus variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Link: https://lore.kernel.org/r/20240210-bus_cleanup-input2-v1-2-0daef7e034e0@marliere.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-04Input: synaptics-rmi4 - make rmi_bus_type constRicardo B. Marliere2-2/+2
Now that the driver core can properly handle constant struct bus_type, move the variable rmi_bus_type to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Link: https://lore.kernel.org/r/20240210-bus_cleanup-input2-v1-1-0daef7e034e0@marliere.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-04Input: xilinx_ps2 - fix kernel-doc for xps2_of_probe functionYang Li1-2/+1
The existing comment block above the xps2_of_probe function does not conform to the kernel-doc standard. This patch fixes the documentation to match the expected kernel-doc format, which includes a structured documentation header with param and return value. Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20240301092115.123092-1-yang.lee@linux.alibaba.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-04input/touchscreen: imagis: add support for IST3032CKarel Balej1-0/+10
IST3032C is a touchscreen chip used for instance in the samsung,coreprimevelte smartphone, with which this was tested. Add the chip specific information to the driver. Reviewed-by: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240301164659.13240-6-karelb@gimli.ms.mff.cuni.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-04input/touchscreen: imagis: Add support for Imagis IST3038BMarkuss Broks1-11/+47
Imagis IST3038B is another variant of Imagis IST3038 IC, which has a different register interface from IST3038C (possibly firmware defined). This should also work for IST3044B (though untested), however other variants using this interface/protocol(IST3026, IST3032, IST3026B, IST3032B) have a different format for coordinates, and they'd need additional effort to be supported by this driver. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240301164659.13240-4-karelb@gimli.ms.mff.cuni.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-04input/touchscreen: imagis: Correct the maximum touch area valueMarkuss Broks1-1/+1
As specified in downstream IST3038B driver and proved by testing, the correct maximum reported value of touch area is 16. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240301164659.13240-2-karelb@gimli.ms.mff.cuni.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-04Input: xpad - add additional HyperX Controller IdentifiersMax Nguyen1-0/+6
Add additional HyperX device identifiers to xpad_device and xpad_table. Suggested-by: Chris Toledanes<chris.toledanes@hp.com> Reviewed-by: Carl Ng <carl.ng@hp.com> Signed-off-by: Max Nguyen <maxwell.nguyen@hp.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/44ad5ffa-76d8-4046-94ee-2ef171930ed2@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-04Input: leds - change config symbol dependency for audio mute triggerHeiner Kallweit1-1/+1
In a follow-up patch implementation of the LED audio trigger will be moved to sound/core/snd_ctl_led, including removal of config symbol LEDS_AUDIO_TRIGGER. Also as of today the audio mute LED trigger is effectively a no-op w/o config symbol SND_CTL_LED being defined. Therefore switch the dependency to this config symbol. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/6011ca63-187c-42dd-a5fd-7dd733d6257c@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-09Input: ti_am335x_tsc - remove redundant assignment to variable configColin Ian King1-1/+0
The variable config is being initialized with a value that is never read, it is being re-assigned in the next statement. The initialization is redundant and can be removed. Cleans up clang scan build warning: drivers/input/touchscreen/ti_am335x_tsc.c:160:2: warning: Value stored to 'config' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240205215940.1851349-1-colin.i.king@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-08Input: xpad - sort xpad_device by vendor and product IDBrenton Simpson1-3/+8
This helps making sure there are no duplicate entries in the tables. Signed-off-by: Brenton Simpson <appsforartists@google.com> Link: https://lore.kernel.org/r/20240130231903.293265-1-appsforartists@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-08Input: synaptics-rmi4 - follow renaming of SPI "master" to "controller"Uwe Kleine-König1-1/+1
In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"") some functions and struct members were renamed. To not break all drivers compatibility macros were provided. To be able to remove these compatibility macros push the renaming into this driver. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/b88413456c970a97319fa7e505768bf82966541b.1707324794.git.u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-08Input: pxspad - follow renaming of SPI "master" to "controller"Uwe Kleine-König1-2/+2
In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"") some functions and struct members were renamed. To not break all drivers compatibility macros were provided. To be able to remove these compatibility macros push the renaming into this driver. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/820fa151077dc192391d546aec35328680803f9f.1707324794.git.u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-07Input: gameport - make gameport_bus constRicardo B. Marliere1-2/+2
Now that the driver core can properly handle constant struct bus_type, move the gameport_bus variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240204-bus_cleanup-input-v1-1-74c2438801cf@marliere.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-04Merge 6.8-rc3 into tty-nextGreg Kroah-Hartman5-6/+47
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-02Merge tag 'input-for-v6.8-rc2' of ↵Linus Torvalds5-6/+47
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix for the fix to deal with newer laptops which get confused by the "GET ID" command when probing for PS/2 keyboards - a couple of tweaks to i8042 to handle Clevo NS70PU and Lifebook U728 laptops - a change to bcm5974 to validate that the device has appropriate endpoints - an addition of new product ID to xpad driver to recognize Lenovo Legion Go controllers - a quirk to Goodix controller to deal with extra GPIO described in ACPI tables on some devices. * tag 'input-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID Input: bcm5974 - check endpoint type before starting traffic Input: xpad - add Lenovo Legion Go controllers Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0
2024-02-02Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk tableSzilard Fabian1-0/+8
Another Fujitsu-related patch. In the initial boot stage the integrated keyboard of Fujitsu Lifebook U728 refuses to work and it's not possible to type for example a dm-crypt passphrase without the help of an external keyboard. i8042.nomux kernel parameter resolves this issue but using that a PS/2 mouse is detected. This input device is unused even when the i2c-hid-acpi kernel module is blacklisted making the integrated ELAN touchpad (04F3:3092) not working at all. So this notebook uses a hid-over-i2c touchpad which is managed by the i2c_designware input driver. Since you can't find a PS/2 mouse port on this computer and you can't connect a PS/2 mouse to it even with an official port replicator I think it's safe to not use the PS/2 mouse port at all. Signed-off-by: Szilard Fabian <szfabian@bluemarch.art> Link: https://lore.kernel.org/r/20240103014717.127307-2-szfabian@bluemarch.art Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-02Input: i8042 - fix strange behavior of touchpad on Clevo NS70PUWerner Sembach1-0/+6
When closing the laptop lid with an external screen connected, the mouse pointer has a constant movement to the lower right corner. Opening the lid again stops this movement, but after that the touchpad does no longer register clicks. The touchpad is connected both via i2c-hid and PS/2, the predecessor of this device (NS70MU) has the same layout in this regard and also strange behaviour caused by the psmouse and the i2c-hid driver fighting over touchpad control. This fix is reusing the same workaround by just disabling the PS/2 aux port, that is only used by the touchpad, to give the i2c-hid driver the lone control over the touchpad. v2: Rebased on current master Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231205163602.16106-1-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-02Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETIDHans de Goede1-1/+2
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") not only the getid command is skipped, but also the de-activating of the keyboard at the end of atkbd_probe(), potentially re-introducing the problem fixed by commit be2d7e4233a4 ("Input: atkbd - fix multi-byte scancode handling on reconnect"). Make sure multi-byte scancode handling on reconnect is still handled correctly by not skipping the atkbd_deactivate() call. Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240126160724.13278-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-02Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETIDHans de Goede1-5/+8
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") the keyboard on Dell XPS 13 9350 / 9360 / 9370 models has stopped working after a suspend/resume. The problem appears to be that atkbd_probe() fails when called from atkbd_reconnect() on resume, which on systems where ATKBD_CMD_GETID is skipped can only happen by ATKBD_CMD_SETLEDS failing. ATKBD_CMD_SETLEDS failing because ATKBD_CMD_GETID was skipped is weird, but apparently that is what is happening. Fix this by also skipping ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID. Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/linux-input/0aa4a61f-c939-46fe-a572-08022e8931c7@molgen.mpg.de/ Closes: https://bbs.archlinux.org/viewtopic.php?pid=2146300 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218424 Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2260517 Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240126160724.13278-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: matrix_keypad - switch to using managed resourcesDmitry Torokhov1-65/+24
Switch the drivers to use managed resources (devm) to simplify error handling and remove the need to have remove() implementation. Link: https://lore.kernel.org/r/20240121053232.276968-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: matrix_keypad - consolidate handling of clustered interruptDmitry Torokhov1-43/+20
Now that the driver stores interrupt numbers corresponding to individual GPIOs in non-clustered mode, it is possible to unify handling of both modes by storing clustered interrupt at position 0 and setting the number of interrupts in this case to 1. Link: https://lore.kernel.org/r/20240121053232.276968-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: matrix_keypad - avoid repeatedly converting GPIO to IRQDmitry Torokhov1-23/+25
There is no need to do conversion from GPIOs to interrupt numbers. Convert row GPIOs to interrupt numbers once in probe() and use this information when the driver needs to enable or disable given interrupt line. Link: https://lore.kernel.org/r/20240121053232.276968-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: bcm5974 - check endpoint type before starting trafficJavier Carrasco1-0/+20
syzbot has found a type mismatch between a USB pipe and the transfer endpoint, which is triggered by the bcm5974 driver[1]. This driver expects the device to provide input interrupt endpoints and if that is not the case, the driver registration should terminate. Repros are available to reproduce this issue with a certain setup for the dummy_hcd, leading to an interrupt/bulk mismatch which is caught in the USB core after calling usb_submit_urb() with the following message: "BOGUS urb xfer, pipe 1 != type 3" Some other device drivers (like the appletouch driver bcm5974 is mainly based on) provide some checking mechanism to make sure that an IN interrupt endpoint is available. In this particular case the endpoint addresses are provided by a config table, so the checking can be targeted to the provided endpoints. Add some basic checking to guarantee that the endpoints available match the expected type for both the trackpad and button endpoints. This issue was only found for the trackpad endpoint, but the checking has been added to the button endpoint as well for the same reasons. Given that there was never a check for the endpoint type, this bug has been there since the first implementation of the driver (f89bd95c5c94). [1] https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622 Fixes: f89bd95c5c94 ("Input: bcm5974 - add driver for Macbook Air and Pro Penryn touchpads") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reported-and-tested-by: syzbot+348331f63b034f89b622@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20231007-topic-bcm5974_bulk-v3-1-d0f38b9d2935@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: goodix-berlin - add SPI support for Goodix Berlin Touchscreen ICNeil Armstrong3-0/+193
Add initial support for the new Goodix "Berlin" touchscreen ICs over the SPI interface. The driver doesn't use the regmap_spi code since the SPI messages needs to be prefixed, thus this custom regmap code. This initial driver is derived from the Goodix goodix_ts_berlin available at [1] and [2] and only supports the GT9916 IC present on the Qualcomm SM8550 MTP & QRD touch panel. The current implementation only supports BerlinD, aka GT9916. [1] https://github.com/goodix/goodix_ts_berlin [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers Reviewed-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240129-topic-goodix-berlin-upstream-initial-v15-4-6f7d096c0a0a@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: goodix-berlin - add I2C support for Goodix Berlin Touchscreen ICNeil Armstrong3-0/+90
Add initial support for the new Goodix "Berlin" touchscreen ICs over the I2C interface. This initial driver is derived from the Goodix goodix_ts_berlin available at [1] and [2] and only supports the GT9916 IC present on the Qualcomm SM8550 MTP & QRD touch panel. The current implementation only supports BerlinD, aka GT9916. [1] https://github.com/goodix/goodix_ts_berlin [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers Reviewed-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240129-topic-goodix-berlin-upstream-initial-v15-3-6f7d096c0a0a@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: add core support for Goodix Berlin Touchscreen ICNeil Armstrong4-0/+783
Add initial support for the new Goodix "Berlin" touchscreen ICs. These touchscreen ICs support SPI, I2C and I3C interface, up to 10 finger touch, stylus and gestures events. This initial driver is derived from the Goodix goodix_ts_berlin available at [1] and [2] and only supports the GT9916 IC present on the Qualcomm SM8550 MTP & QRD touch panel. The current implementation only supports BerlinD, aka GT9916. Support for advanced features like: - Firmware & config update - Stylus events - Gestures events - Previous revisions support (BerlinA or BerlinB) is not included in current version. The current support will work with currently flashed firmware and config, and bail out if firmware or config aren't flashed yet. [1] https://github.com/goodix/goodix_ts_berlin [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers Reviewed-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240129-topic-goodix-berlin-upstream-initial-v15-2-6f7d096c0a0a@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: xpad - add Lenovo Legion Go controllersBrenton Simpson1-0/+2
The Lenovo Legion Go is a handheld gaming system, similar to a Steam Deck. It has a gamepad (including rear paddles), 3 gyroscopes, a trackpad, volume buttons, a power button, and 2 LED ring lights. The Legion Go firmware presents these controls as a USB hub with various devices attached. In its default state, the gamepad is presented as an Xbox controller connected to this hub. (By holding a combination of buttons, it can be changed to use the older DirectInput API.) This patch teaches the existing Xbox controller module `xpad` to bind to the controller in the Legion Go, which enables support for the: - directional pad, - analog sticks (including clicks), - X, Y, A, B, - start and select (or menu and capture), - shoulder buttons, and - rumble. The trackpad, touchscreen, volume controls, and power button are already supported via existing kernel modules. Two of the face buttons, the gyroscopes, rear paddles, and LEDs are not. After this patch lands, the Legion Go will be mostly functional in Linux, out-of-the-box. The various components of the USB hub can be synthesized into a single logical controller (including the additional buttons) in userspace with [Handheld Daemon](https://github.com/hhd-dev/hhd), which makes the Go fully functional. Signed-off-by: Brenton Simpson <appsforartists@google.com> Link: https://lore.kernel.org/r/20240118183546.418064-1-appsforartists@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-28vt: remove superfluous CONFIG_HW_CONSOLELukas Bulwahn1-3/+3
The config HW_CONSOLE is always identical to the config VT and is not visible in the kernel's build menuconfig. So, CONFIG_HW_CONSOLE is redundant. Replace all references to CONFIG_HW_CONSOLE with CONFIG_VT and remove CONFIG_HW_CONSOLE. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20240108134102.601-1-lukas.bulwahn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-22Input: 88pm80x_onkey - add SPDX and drop GPL boilerplateDuje Mihanović1-13/+1
Add a SPDX-License-Identifier to the 88PM80x onkey driver and drop the GPL boilerplate in accordance with current kernel code guidelines. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240121-88pm80x-onkey-spdx-v1-1-b646d4749f5b@skole.hr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-21Input: leds - set default-trigger for muteBernhard Seibold1-1/+7
Set the default-trigger for the mute led to audio-mute. Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de> Link: https://lore.kernel.org/r/20240113103743.97205-1-mail@bernhard-seibold.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-20Input: bcm-keypad - remove redundant of_match_ptr()Ruan Jinjie1-1/+1
The driver depends on CONFIG_OF, it is not necessary to use of_match_ptr() here. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230809101626.2664651-1-ruanjinjie@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-20Input: remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET1-8/+6
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). Note that the upper limit of ida_simple_get() is exclusive, but the one of ida_alloc_range() is inclusive. So a -1 has been added when needed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/a885de14beead2cc3c1c946f192b8b178dac696a.1705349930.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-19Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0Hans de Goede1-1/+2
Some devices list 3 Gpio resources in the ACPI resource list for the touchscreen: 1. GpioInt resource pointing to the GPIO used for the interrupt 2. GpioIo resource pointing to the reset GPIO 3. GpioIo resource pointing to the GPIO used for the interrupt Note how the third extra GpioIo resource really is a duplicate of the GpioInt provided info. Ignore this extra GPIO, treating this setup the same as gpio_count == 2 && gpio_int_idx == 0 fixes the touchscreen not working on the Thunderbook Colossus W803 rugged tablet and likely also on the CyberBook_T116K. Reported-by: Maarten van der Schrieck Closes: https://gitlab.com/AdyaAdya/goodix-touchscreen-linux-driver/-/issues/22 Suggested-by: Maarten van der Schrieck Tested-by: Maarten van der Schrieck Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231223141650.10679-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-19Merge tag 'input-for-v6.8-rc0' of ↵Linus Torvalds37-367/+1101
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for Adafruit Seesaw gamepad device - Zforce touchscreen will handle standard device properties for axis swap/inversion - handling of advanced sensitivity settings in Microchip CAP11xx capacitive sensor driver - more drivers have been converted to use newer gpiod API - support for dedicated wakeup IRQs in gpio-keys dirver - support for slider gestures and OTP variants in iqs269a driver - atkbd will report keyboard version as 0xab83 in cases when GET ID command was skipped (to deal with problematic firmware on newer laptops), restoring the previous behavior - other assorted cleanups and changes * tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits) Input: atkbd - use ab83 as id when skipping the getid command Input: driver for Adafruit Seesaw Gamepad dt-bindings: input: bindings for Adafruit Seesaw Gamepad Input: da9063_onkey - avoid explicitly setting input's parent Input: da9063_onkey - avoid using OF-specific APIs Input: iqs269a - add support for OTP variants dt-bindings: input: iqs269a: Add bindings for OTP variants Input: iqs269a - add support for slider gestures dt-bindings: input: iqs269a: Add bindings for slider gestures Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages Input: zforce_ts - accept standard touchscreen properties dt-bindings: touchscreen: neonode,zforce: Use standard properties dt-bindings: touchscreen: convert neonode,zforce to json-schema dt-bindings: input: convert drv266x to json-schema Input: da9063 - use dev_err_probe() Input: da9063 - drop redundant prints in probe() Input: da9063 - simplify obtaining OF match data Input: as5011 - convert to GPIO descriptor Input: omap-keypad - drop optional GPIO support Input: tca6416-keypad - drop unused include ...
2024-01-19Input: synaptics-rmi4 - fail probing if memory allocation for "phys" failsKunwu Chan1-1/+5
While input core can work with input->phys set to NULL userspace might depend on it, so better fail probing if allocation fails. The system must be in a pretty bad shape for it to happen anyway. Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Link: https://lore.kernel.org/r/20240117073124.143636-1-chentao@kylinos.cn Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-19Input: navpoint - remove driverDuje Mihanović3-363/+0
This driver does not use the SPI core as it should, instead tampering with the SSP registers manually. Refactoring the driver is almost certainly not worth it as the hardware seems to have been designed for and used only in the HP iPAQ hx4700 removed more than a year ago in d6df7df7ae5a ("ARM: pxa: remove unused board files"), so let's remove it. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20240116-navpoint-removal-v2-2-e566806f1009@skole.hr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-17Input: atkbd - use ab83 as id when skipping the getid commandHans de Goede1-5/+7
Barnabás reported that the change to skip the getid command when the controller is in translated mode on laptops caused the Version field of his "AT Translated Set 2 keyboard" input device to change from ab83 to abba, breaking a custom hwdb entry for this keyboard. Use the standard ab83 id for keyboards when getid is skipped (rather then that getid fails) to avoid reporting a different Version to userspace then before skipping the getid. Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Reported-by: Barnabás Pőcze <pobrn@protonmail.com> Closes: https://lore.kernel.org/linux-input/W1ydwoG2fYv85Z3C3yfDOJcVpilEvGge6UGa9kZh8zI2-qkHXp7WLnl2hSkFz63j-c7WupUWI5TLL6n7Lt8DjRuU-yJBwLYWrreb1hbnd6A=@protonmail.com/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240116204325.7719-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-14Merge branch 'next' into for-linusDmitry Torokhov36-362/+1094
Prepare input updates for 6.8 merge window.
2024-01-13Merge tag 'pwm/for-6.8-rc1' of ↵Linus Torvalds3-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This contains a bunch of cleanups and simplifications across the board, as well as a number of small fixes. Perhaps the most notable change here is the addition of an API that allows PWMs to be used in atomic contexts, which is useful when time- critical operations are involved, such as using a PWM to generate IR signals. Finally, I have decided to step down as PWM subsystem maintainer. Due to other responsibilities I have lately not been able to find the time that the subsystem deserves and Uwe, who has been helping out a lot for the past few years and has many things planned for the future, has kindly volunteered to take over. I have no doubt that he will be a suitable replacement" * tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits) MAINTAINERS: pwm: Thierry steps down, Uwe takes over pwm: linux/pwm.h: fix Excess kernel-doc description warning pwm: Add pwm_apply_state() compatibility stub pwm: cros-ec: Drop documentation for dropped struct member pwm: Drop two unused API functions pwm: lpc18xx-sct: Don't modify the cached period of other PWM outputs pwm: meson: Simplify using dev_err_probe() pwm: stmpe: Silence duplicate error messages pwm: Reduce number of pointer dereferences in pwm_device_request() pwm: crc: Use consistent variable naming for driver data pwm: omap-dmtimer: Drop locking dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml media: pwm-ir-tx: Trigger edges from hrtimer interrupt context pwm: bcm2835: Allow PWM driver to be used in atomic context pwm: Make it possible to apply PWM changes in atomic context pwm: renesas: Remove unused include pwm: Replace ENOTSUPP with EOPNOTSUPP pwm: Rename pwm_apply_state() to pwm_apply_might_sleep() pwm: Stop referencing pwm->chip pwm: Update kernel doc for struct pwm_chip ...
2024-01-13Merge tag 'media/v6.8-2' of ↵Linus Torvalds2-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l core: subdev frame interval now supports which field - v4l kapi: moves and renames the init_cfg pad op to init_state as an internal op. - new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900 - new camera driver: STM32 DCMIPP - s5p-mfc has gained MFC v12 support - new ISP driver added to staging: Starfive - new stateful encoder/decoded: Wave5 codec It is found on the J721S2 SoC, JH7100 SoC, ssd202d SoC. Etc. - fwnode gained support for MIPI "DisCo for Imaging" (https://www.mipi.org/specifications/mipi-disco-imaging) - as usual, lots of cleanups, fixups and driver improvements. * tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits) media: i2c: thp7312: select CONFIG_FW_LOADER media: i2c: mt9m114: use fsleep() in place of udelay() media: videobuf2: core: Rename min_buffers_needed field in vb2_queue media: i2c: thp7312: Store frame interval in subdev state media: docs: uAPI: Fix documentation of 'which' field for routing ioctls media: docs: uAPI: Expand error documentation for invalid 'which' value media: docs: uAPI: Clarify error documentation for invalid 'which' value media: v4l2-subdev: Store frame interval in subdev state media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF media: s5p-mfc: Load firmware for each run in MFCv12. media: s5p-mfc: Set context for valid case before calling try_run media: s5p-mfc: Add support for DMABUF for encoder media: s5p-mfc: Add support for UHD encoding. media: s5p-mfc: Add support for rate controls in MFCv12 media: s5p-mfc: Add YV12 and I420 multiplanar format support media: s5p-mfc: Add initial support for MFCv12 media: s5p-mfc: Rename IS_MFCV10 macro ...
2024-01-10Input: driver for Adafruit Seesaw GamepadAnshul Dalal3-0/+326
Adds a driver for a mini gamepad that communicates over i2c, the gamepad has bidirectional thumb stick input and six buttons. The gamepad chip utilizes the open framework from Adafruit called 'Seesaw' to transmit the ADC data for the joystick and digital pin state for the buttons. I have only implemented the functionality required to receive the thumb stick and button state. Steps in reading the gamepad state over i2c: 1. Reset the registers 2. Set the pin mode of the pins specified by the `BUTTON_MASK` to input `BUTTON_MASK`: A bit-map for the six digital pins internally connected to the joystick buttons. 3. Enable internal pullup resistors for the `BUTTON_MASK` 4. Bulk set the pin state HIGH for `BUTTON_MASK` 5. Poll the device for button and joystick state done by: `seesaw_read_data(struct i2c_client *client, struct seesaw_data *data)` Product page: https://www.adafruit.com/product/5743 Arduino driver: https://github.com/adafruit/Adafruit_Seesaw Driver tested on RPi Zero 2W Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Anshul Dalal <anshulusr@gmail.com> Link: https://lore.kernel.org/r/20240106015111.882325-2-anshulusr@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-10Merge tag 'spi-v6.8' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A moderately busy release for SPI, the main core update was the merging of support for multiple chip selects, used in some flash configurations. There were also big overhauls for the AXI SPI Engine and PL022 drivers, plus some new device support for ST. There's a few patches for other trees, API updates to allow the multiple chip select support and one of the naming modernisations touched a controller embedded in the USB code. - Support for multiple chip selects. - A big overhaul for the AXI SPI engine driver, modernising it and adding a bunch of new features. - Modernisation of the PL022 driver, fixing some issues with submitting messages while in atomic context in the process. - Many drivers were converted to use new APIs which avoid outdated terminology for devices and controllers. - Support for ST Microelectronics STM32F7 and STM32MP25, and Renesas RZ/Five" * tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (83 commits) spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc dt-bindings: spi: stm32: add st,stm32mp25-spi compatible spi: stm32: use dma_get_slave_caps prior to configuring dma channel spi: axi-spi-engine: fix struct member doc warnings spi: pl022: update description of internal_cs_control() spi: pl022: delete description of cur_msg spi: dw: Remove Intel Thunder Bay SOC support spi: dw: Remove Intel Thunder Bay SOC support spi: sh-msiof: Enforce fixed DTDL for R-Car H3 spi: ljca: switch to use devm_spi_alloc_host() spi: cs42l43: switch to use devm_spi_alloc_host() spi: zynqmp-gqspi: switch to use modern name spi: zynq-qspi: switch to use modern name spi: xtensa-xtfpga: switch to use modern name spi: xlp: switch to use modern name spi: xilinx: switch to use modern name spi: xcomm: switch to use modern name spi: uniphier: switch to use modern name spi: topcliff-pch: switch to use modern name spi: wpcm-fiu: switch to use devm_spi_alloc_host() ...
2024-01-04Input: da9063_onkey - avoid explicitly setting input's parentDmitry Torokhov1-1/+0
devm_input_allocate_device() already sets parent of the new input device, there's no need to set it up explicitly. Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/ZYOseYfVgg0Ve6Zl@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-04Input: da9063_onkey - avoid using OF-specific APIsDmitry Torokhov1-3/+4
There is nothing OF-specific in the driver, so switch from OF properties helpers to generic device helpers. Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/ZYOsUfKceOFXuCt5@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-02Input: iqs269a - add support for OTP variantsJeff LaBundy1-3/+89
This patch adds support for each available OTP variant of the device. The OTP configuration cannot be read over I2C, so it is derived from a compatible string instead. Early revisions of the D0 order code require their OTP-enabled func- tionality to be manually restored following a soft reset; this patch accommodates this erratum as well. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/ZZMaZbdk6iAKUjlm@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-02Input: iqs269a - add support for slider gesturesJeff LaBundy1-29/+191
This patch adds support for slider gestures that can be expressed by the device. Each gesture (e.g. tap or hold) can be mapped to a unique keycode for either slider 0 or 1. With this change, raw slider coordinates are reported only if the slider has no keycodes defined. This prevents unwanted mouse cur- sor movement when expressing axial gestures (e.g. swipe) and also eliminates some unnecessary I2C traffic. Different revisions of silicon use different tap and swipe timeout step sizes. Apply an appropriate scaling factor depending on which revision is found. To facilitate this change, store the iqs269_ver_info struct in the driver's private data so that other functions can use it after the driver has probed. Last but not least, a former reserved field in iqs269_ver_info now contains useful information; give it a name (fw_num). Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/ZZMaT46WQq1/Nrsb@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-31 08:59:15 +0300