| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Two fixes for the selftests:
- CONFIG_IOMMUFD_TEST needs CONFIG_IOMMUFD_DRIVER to work
- The kconfig fragment sshould include fault injection so the fault
injection test can work"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Add config needed for iommufd_fail_nth
iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest
|
|
Some kconfigs don't automatically include this symbol which results in sub
functions for some of the dirty tracking related things that are
non-functional. Thus the test suite will fail. select IOMMUFD_DRIVER in
the IOMMUFD_TEST kconfig to fix it.
Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Link: https://lore.kernel.org/r/20240327182050.GA1363414@ziepe.ca
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Use consistent log severity (pr_warn) to log all messages in SNP
enable path.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240410101643.32309-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed
devices") adds all devices probed by the iommu driver in a rbtree
indexed by the source ID of each device. It assumes that each device
has a unique source ID. This assumption is incorrect and the VT-d
spec doesn't state this requirement either.
The reason for using a rbtree to track devices is to look up the device
with PCI bus and devfunc in the paths of handling ATS invalidation time
out error and the PRI I/O page faults. Both are PCI ATS feature related.
Only track the devices that have PCI ATS capabilities in the rbtree to
avoid unnecessary WARN_ON in the iommu probe path. Otherwise, on some
platforms below kernel splat will be displayed and the iommu probe results
in failure.
WARNING: CPU: 3 PID: 166 at drivers/iommu/intel/iommu.c:158 intel_iommu_probe_device+0x319/0xd90
Call Trace:
<TASK>
? __warn+0x7e/0x180
? intel_iommu_probe_device+0x319/0xd90
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? intel_iommu_probe_device+0x319/0xd90
? debug_mutex_init+0x37/0x50
__iommu_probe_device+0xf2/0x4f0
iommu_probe_device+0x22/0x70
iommu_bus_notifier+0x1e/0x40
notifier_call_chain+0x46/0x150
blocking_notifier_call_chain+0x42/0x60
bus_notify+0x2f/0x50
device_add+0x5ed/0x7e0
platform_device_add+0xf5/0x240
mfd_add_devices+0x3f9/0x500
? preempt_count_add+0x4c/0xa0
? up_write+0xa2/0x1b0
? __debugfs_create_file+0xe3/0x150
intel_lpss_probe+0x49f/0x5b0
? pci_conf1_write+0xa3/0xf0
intel_lpss_pci_probe+0xcf/0x110 [intel_lpss_pci]
pci_device_probe+0x95/0x120
really_probe+0xd9/0x370
? __pfx___driver_attach+0x10/0x10
__driver_probe_device+0x73/0x150
driver_probe_device+0x19/0xa0
__driver_attach+0xb6/0x180
? __pfx___driver_attach+0x10/0x10
bus_for_each_dev+0x77/0xd0
bus_add_driver+0x114/0x210
driver_register+0x5b/0x110
? __pfx_intel_lpss_pci_driver_init+0x10/0x10 [intel_lpss_pci]
do_one_initcall+0x57/0x2b0
? kmalloc_trace+0x21e/0x280
? do_init_module+0x1e/0x210
do_init_module+0x5f/0x210
load_module+0x1d37/0x1fc0
? init_module_from_file+0x86/0xd0
init_module_from_file+0x86/0xd0
idempotent_init_module+0x17c/0x230
__x64_sys_finit_module+0x56/0xb0
do_syscall_64+0x6e/0x140
entry_SYSCALL_64_after_hwframe+0x71/0x79
Fixes: 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed devices")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10689
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240407011429.136282-1-baolu.lu@linux.intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The page request queue is per IOMMU, its allocation should be made
NUMA-aware for performance reasons.
Fixes: a222a7f0bb6c ("iommu/vt-d: Implement page request handling")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240403214007.985600-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The commit "iommu/vt-d: Add IOMMU perfmon support" introduce IOMMU
PMU feature, but use the wrong config when set pasid filter.
Fixes: 7232ab8b89e9 ("iommu/vt-d: Add IOMMU perfmon support")
Signed-off-by: Xuchun Shang <xuchun.shang@linux.alibaba.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240401060753.3321318-1-xuchun.shang@linux.alibaba.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240410164109.233308-1-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
DTE[Mode]=0 is not supported when SNP is enabled in the host. That means
to support SNP, IOMMU must be configured with V1 page table (See IOMMU
spec [1] for the details). If user passes kernel command line to configure
IOMMU domains with v2 page table (amd_iommu=pgtbl_v2) then disable SNP
as the user asked by not forcing the page table to v1.
[1] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/specifications/48882_IOMMU.pdf
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240410085702.31869-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
LOCKDEP detector reported below warning:
----------------------------------------
[ 23.796949] ========================================================
[ 23.796950] WARNING: possible irq lock inversion dependency detected
[ 23.796952] 6.8.0fix+ #811 Not tainted
[ 23.796954] --------------------------------------------------------
[ 23.796954] kworker/0:1/8 just changed the state of lock:
[ 23.796956] ff365325e084a9b8 (&domain->lock){..-.}-{3:3}, at: amd_iommu_flush_iotlb_all+0x1f/0x50
[ 23.796969] but this lock took another, SOFTIRQ-unsafe lock in the past:
[ 23.796970] (pd_bitmap_lock){+.+.}-{3:3}
[ 23.796972]
and interrupts could create inverse lock ordering between them.
[ 23.796973]
other info that might help us debug this:
[ 23.796974] Chain exists of:
&domain->lock --> &dev_data->lock --> pd_bitmap_lock
[ 23.796980] Possible interrupt unsafe locking scenario:
[ 23.796981] CPU0 CPU1
[ 23.796982] ---- ----
[ 23.796983] lock(pd_bitmap_lock);
[ 23.796985] local_irq_disable();
[ 23.796985] lock(&domain->lock);
[ 23.796988] lock(&dev_data->lock);
[ 23.796990] <Interrupt>
[ 23.796991] lock(&domain->lock);
Fix this issue by disabling interrupt when acquiring pd_bitmap_lock.
Note that this is temporary fix. We have a plan to replace custom bitmap
allocator with IDA allocator.
Fixes: 87a6f1f22c97 ("iommu/amd: Introduce per-device domain ID to fix potential TLB aliasing issue")
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240404102717.6705-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The host SNP worthiness can determined later, after alternatives have
been patched, in snp_rmptable_init() depending on cmdline options like
iommu=pt which is incompatible with SNP, for example.
Which means that one cannot use X86_FEATURE_SEV_SNP and will need to
have a special flag for that control.
Use that newly added CC_ATTR_HOST_SEV_SNP in the appropriate places.
Move kdump_sev_callback() to its rightful place, while at it.
Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Link: https://lore.kernel.org/r/20240327154317.29909-6-bp@alien8.de
|
|
The SVA code checks that the PASID is valid for the device when assigning
the PASID to the MM, but the normal PAGING related path does not check it.
Devices that don't support PASID or PASID values too large for the device
should not invoke the driver callback. The drivers should rely on the
core code for this enforcement.
Fixes: 16603704559c7a68 ("iommu: Add attach/detach_dev_pasid iommu interfaces")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v1-460705442b30+659-iommu_check_pasid_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
STE attributes(NSCFG, PRIVCFG, INSTCFG) use value 0 for "Use Icomming",
for some reason SHCFG doesn't follow that, and it is defined as "0b01".
Currently the driver sets SHCFG to Use Incoming for stage-2 and bypass
domains.
However according to the User Manual (ARM IHI 0070 F.b):
When SMMU_IDR1.ATTR_TYPES_OVR == 0, this field is RES0 and the
incoming Shareability attribute is used.
This patch adds a condition for writing SHCFG to Use incoming to be
compliant with the architecture, and defines ATTR_TYPE_OVR as a new
feature discovered from IDR1.
This also required to propagate the SMMU through some functions args.
There is no need to add similar condition for the newly introduced function
arm_smmu_get_ste_used() as the values of the STE are the same before and
after any transition, so this will not trigger any change. (we already
do the same for the VMID).
Although this is a misconfiguration from the driver, this has been there
for a long time, so probably no HW running Linux is affected by it.
Reported-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/all/20240215134952.GA690@willie-the-truck/
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240323134658.464743-1-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
STRTAB_STE_0_V is a CPU value, it needs conversion for sparse to be clean.
The missing annotation was a mistake introduced by splitting the ops out
from the STE writer.
Fixes: 7da51af9125c ("iommu/arm-smmu-v3: Make STE programming independent of the callers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403011441.5WqGrYjp-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-98b23ebb0c84+9f-smmu_cputole_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"This has a set of swiotlb alignment fixes for sometimes very long
standing bugs from Will. We've been discussion them for a while and
they should be solid now"
* tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Reinstate page-alignment for mappings >= PAGE_SIZE
iommu/dma: Force swiotlb_max_mapping_size on an untrusted device
swiotlb: Fix alignment checks when both allocation and DMA masks are present
swiotlb: Honour dma_alloc_coherent() alignment in swiotlb_alloc()
swiotlb: Enforce page alignment in swiotlb_alloc()
swiotlb: Fix double-allocation of slots due to broken alignment handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)
- Use more threads when building Debian packages in parallel
- Fix warnings shown during the RPM kernel package uninstallation
- Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
Makefile
- Support GCC's -fmin-function-alignment flag
- Fix a null pointer dereference bug in modpost
- Add the DTB support to the RPM package
- Various fixes and cleanups in Kconfig
* tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits)
kconfig: tests: test dependency after shuffling choices
kconfig: tests: add a test for randconfig with dependent choices
kconfig: tests: support KCONFIG_SEED for the randconfig runner
kbuild: rpm-pkg: add dtb files in kernel rpm
kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig()
kconfig: check prompt for choice while parsing
kconfig: lxdialog: remove unused dialog colors
kconfig: lxdialog: fix button color for blackbg theme
modpost: fix null pointer dereference
kbuild: remove GCC's default -Wpacked-bitfield-compat flag
kbuild: unexport abs_srctree and abs_objtree
kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1
kconfig: remove named choice support
kconfig: use linked list in get_symbol_str() to iterate over menus
kconfig: link menus to a symbol
kbuild: fix inconsistent indentation in top Makefile
kbuild: Use -fmin-function-alignment when available
alpha: merge two entries for CONFIG_ALPHA_GAMMA
alpha: merge two entries for CONFIG_ALPHA_EV4
kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj)
...
|
|
The swiotlb does not support a mapping size > swiotlb_max_mapping_size().
On the other hand, with a 64KB PAGE_SIZE configuration, it's observed that
an NVME device can map a size between 300KB~512KB, which certainly failed
the swiotlb mappings, though the default pool of swiotlb has many slots:
systemd[1]: Started Journal Service.
=> nvme 0000:00:01.0: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 32 (slots)
note: journal-offline[392] exited with irqs disabled
note: journal-offline[392] exited with preempt_count 1
Call trace:
[ 3.099918] swiotlb_tbl_map_single+0x214/0x240
[ 3.099921] iommu_dma_map_page+0x218/0x328
[ 3.099928] dma_map_page_attrs+0x2e8/0x3a0
[ 3.101985] nvme_prep_rq.part.0+0x408/0x878 [nvme]
[ 3.102308] nvme_queue_rqs+0xc0/0x300 [nvme]
[ 3.102313] blk_mq_flush_plug_list.part.0+0x57c/0x600
[ 3.102321] blk_add_rq_to_plug+0x180/0x2a0
[ 3.102323] blk_mq_submit_bio+0x4c8/0x6b8
[ 3.103463] __submit_bio+0x44/0x220
[ 3.103468] submit_bio_noacct_nocheck+0x2b8/0x360
[ 3.103470] submit_bio_noacct+0x180/0x6c8
[ 3.103471] submit_bio+0x34/0x130
[ 3.103473] ext4_bio_write_folio+0x5a4/0x8c8
[ 3.104766] mpage_submit_folio+0xa0/0x100
[ 3.104769] mpage_map_and_submit_buffers+0x1a4/0x400
[ 3.104771] ext4_do_writepages+0x6a0/0xd78
[ 3.105615] ext4_writepages+0x80/0x118
[ 3.105616] do_writepages+0x90/0x1e8
[ 3.105619] filemap_fdatawrite_wbc+0x94/0xe0
[ 3.105622] __filemap_fdatawrite_range+0x68/0xb8
[ 3.106656] file_write_and_wait_range+0x84/0x120
[ 3.106658] ext4_sync_file+0x7c/0x4c0
[ 3.106660] vfs_fsync_range+0x3c/0xa8
[ 3.106663] do_fsync+0x44/0xc0
Since untrusted devices might go down the swiotlb pathway with dma-iommu,
these devices should not map a size larger than swiotlb_max_mapping_size.
To fix this bug, add iommu_dma_max_mapping_size() for untrusted devices to
take into account swiotlb_max_mapping_size() v.s. iova_rcache_range() from
the iommu_dma_opt_mapping_size().
Fixes: 82612d66d51d ("iommu: Allow the dma-iommu api to use bounce buffers")
Link: https://lore.kernel.org/r/ee51a3a5c32cf885b18f6416171802669f4a718a.1707851466.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
[will: Drop redundant is_swiotlb_active(dev) check]
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Constification of bus_type pointer
- Preparations for user-space page-fault delivery
- Use a named kmem_cache for IOVA magazines
Intel VT-d changes from Lu Baolu:
- Add RBTree to track iommu probed devices
- Add Intel IOMMU debugfs document
- Cleanup and refactoring
ARM-SMMU Updates from Will Deacon:
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2: Support for Qualcomm X1E80100 MDSS
- SMMUv3: Significant rework of the driver's STE manipulation and
domain handling code. This is the initial part of a larger scale
rework aiming to improve the driver's implementation of the
IOMMU-API in preparation for hooking up IOMMUFD support.
AMD-Vi Updates:
- Refactor GCR3 table support for SVA
- Cleanups
Some smaller cleanups and fixes"
* tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu: Fix compilation without CONFIG_IOMMU_INTEL
iommu/amd: Fix sleeping in atomic context
iommu/dma: Document min_align_mask assumption
iommu/vt-d: Remove scalabe mode in domain_context_clear_one()
iommu/vt-d: Remove scalable mode context entry setup from attach_dev
iommu/vt-d: Setup scalable mode context entry in probe path
iommu/vt-d: Fix NULL domain on device release
iommu: Add static iommu_ops->release_domain
iommu/vt-d: Improve ITE fault handling if target device isn't present
iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected
PCI: Make pci_dev_is_disconnected() helper public for other drivers
iommu/vt-d: Use device rbtree in iopf reporting path
iommu/vt-d: Use rbtree to track iommu probed devices
iommu/vt-d: Merge intel_svm_bind_mm() into its caller
iommu/vt-d: Remove initialization for dynamically heap-allocated rcu_head
iommu/vt-d: Remove treatment for revoking PASIDs with pending page faults
iommu/vt-d: Add the document for Intel IOMMU debugfs
iommu/vt-d: Use kcalloc() instead of kzalloc()
iommu/vt-d: Remove INTEL_IOMMU_BROKEN_GFX_WA
iommu: re-use local fwnode variable in iommu_ops_from_fwnode()
...
|
|
Pull SoC device tree updates from Arnd Bergmann:
"There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:
- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar to
the already supported MT7986A (Filogic 830).
- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.
- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
automotive SoCs.
- TI J722S is another automotive variant of its K3 family, related to
the AM62 series.
There are a total of 7 new arm32 machines and 45 arm64 ones, including
- Two Android phones based on the old Tegra30 chip
- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
SoM development board
- A set-top box using Amlogic Meson G12A S905X2
- Eight embedded board using NXP i.MX6/8/9
- Three machines using Mediatek network router chips
- Ten Chromebooks, all based on Mediatek MT8186
- One development board based on Mediatek MT8395 (Genio 1200)
- Seven tablets and phones based on Qualcomm SoCs, most of them from
Samsung.
- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)
- Three variants of the "White Hawk" board for Renesas automotive
SoCs
- Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
console and industrial form factors.
- Three evaluation boards for TI K3 based SoCs
The other changes are mainly the usual feature additions for existing
hardware, cleanups, and dtc compile time fixes. One notable change is
the inclusion of PowerVR SGX GPU nodes on TI SoCs"
* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
arm64: dts: qcom: sm8650: Fix SPMI channels size
arm64: dts: qcom: sm8550: Fix SPMI channels size
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
dtc: Enable dtc interrupt_provider check
arm64: dts: st: add video encoder support to stm32mp255
arm64: dts: st: add video decoder support to stm32mp255
ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
ARM: dts: stm32: enable CRC on stm32mp135f-dk
ARM: dts: stm32: add CRC on stm32mp131
ARM: dts: add stm32f769-disco-mb1166-reva09
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add DSI support on stm32f769
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Add the x86 part of the SEV-SNP host support.
This will allow the kernel to be used as a KVM hypervisor capable of
running SNP (Secure Nested Paging) guests. Roughly speaking, SEV-SNP
is the ultimate goal of the AMD confidential computing side,
providing the most comprehensive confidential computing environment
up to date.
This is the x86 part and there is a KVM part which did not get ready
in time for the merge window so latter will be forthcoming in the
next cycle.
- Rework the early code's position-dependent SEV variable references in
order to allow building the kernel with clang and -fPIE/-fPIC and
-mcmodel=kernel
- The usual set of fixes, cleanups and improvements all over the place
* tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/sev: Disable KMSAN for memory encryption TUs
x86/sev: Dump SEV_STATUS
crypto: ccp - Have it depend on AMD_IOMMU
iommu/amd: Fix failure return from snp_lookup_rmpentry()
x86/sev: Fix position dependent variable references in startup code
crypto: ccp: Make snp_range_list static
x86/Kconfig: Remove CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT
Documentation: virt: Fix up pre-formatted text block for SEV ioctls
crypto: ccp: Add the SNP_SET_CONFIG command
crypto: ccp: Add the SNP_COMMIT command
crypto: ccp: Add the SNP_PLATFORM_STATUS command
x86/cpufeatures: Enable/unmask SEV-SNP CPU feature
KVM: SEV: Make AVIC backing, VMSA and VMCB memory allocation SNP safe
crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump
iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown
crypto: ccp: Handle legacy SEV commands when SNP is enabled
crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled
crypto: ccp: Handle the legacy TMR allocation when SNP is enabled
x86/sev: Introduce an SNP leaked pages list
crypto: ccp: Provide an API to issue SEV and SNP commands
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI interrupt subsystem and initial RISC-V MSI
support.
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes"
* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
genirq/matrix: Dynamic bitmap allocation
irqchip/riscv-intc: Add support for RISC-V AIA
irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
irqchip/sifive-plic: Use devm_xyz() for managed allocation
irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
irqchip/sifive-plic: Convert PLIC driver into a platform driver
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
irqchip/imx-intmux: Handle pure domain searches correctly
genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
genirq/irqdomain: Reroute device MSI create_mapping
genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
genirq/msi: Optionally use dev->fwnode for device domain
genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
...
|
|
'x86/amd' and 'core' into next
|
|
When the kernel is comiled with CONFIG_IRQ_REMAP=y but without
CONFIG_IOMMU_INTEL compilation fails since commit def054b01a8678 with an
undefined reference to device_rbtree_find(). This patch makes sure that
intel specific code is only compiled with CONFIG_IOMMU_INTEL=y.
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Fixes: 80a9b50c0b9e ("iommu/vt-d: Improve ITE fault handling if target device isn't present")
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240307194419.15801-1-spasswolf@web.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit cf70873e3d01 ("iommu/amd: Refactor GCR3 table helper functions")
changed GFP flag we use for GCR3 table. Original plan was to move GCR3
table allocation outside spinlock. But this requires complete rework of
attach device path. Hence we didn't do it as part of SVA series. For now
revert the GFP flag to ATOMIC (same as original code).
Fixes: cf70873e3d01 ("iommu/amd: Refactor GCR3 table helper functions")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240307052738.116035-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
iommu-dma does not explicitly reference min_align_mask since we already
assume that will be less than or equal to any typical IOVA granule.
We wouldn't realistically expect to see the case where it is larger, and
that would be non-trivial to support, however for the sake of reasoning
(particularly around the interaction with SWIOTLB), let's clearly
enforce the assumption.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/dbb4d2d8e5d1691ac9a6c67e9758904e6c447ba5.1709553942.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
domain_context_clear_one() only handles the context entry teardown in
legacy mode. Remove the scalable mode check in it to avoid dead code.
Remove an unnecessary check in the code as well.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240305013305.204605-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The scalable mode context entry is now setup in the probe_device path,
eliminating the need to configure it in the attach_dev path. Removes the
redundant code from the attach_dev path to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240305013305.204605-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In contrast to legacy mode, the DMA translation table is configured in
the PASID table entry instead of the context entry for scalable mode.
For this reason, it is more appropriate to set up the scalable mode
context entry in the device_probe callback and direct it to the
appropriate PASID table.
The iommu domain attach/detach operations only affect the PASID table
entry. Therefore, there is no need to modify the context entry when
configuring the translation type and page table.
The only exception is the kdump case, where context entry setup is
postponed until the device driver invokes the first DMA interface.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240305013305.204605-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In the kdump kernel, the IOMMU operates in deferred_attach mode. In this
mode, info->domain may not yet be assigned by the time the release_device
function is called. It leads to the following crash in the crash kernel:
BUG: kernel NULL pointer dereference, address: 000000000000003c
...
RIP: 0010:do_raw_spin_lock+0xa/0xa0
...
_raw_spin_lock_irqsave+0x1b/0x30
intel_iommu_release_device+0x96/0x170
iommu_deinit_device+0x39/0xf0
__iommu_group_remove_device+0xa0/0xd0
iommu_bus_notifier+0x55/0xb0
notifier_call_chain+0x5a/0xd0
blocking_notifier_call_chain+0x41/0x60
bus_notify+0x34/0x50
device_del+0x269/0x3d0
pci_remove_bus_device+0x77/0x100
p2sb_bar+0xae/0x1d0
...
i801_probe+0x423/0x740
Use the release_domain mechanism to fix it. The scalable mode context
entry which is not part of release domain should be cleared in
release_device().
Fixes: 586081d3f6b1 ("iommu/vt-d: Remove DEFER_DEVICE_DOMAIN_INFO")
Reported-by: Eric Badger <ebadger@purestorage.com>
Closes: https://lore.kernel.org/r/20240113181713.1817855-1-ebadger@purestorage.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240305013305.204605-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The current device_release callback for individual iommu drivers does the
following:
1) Silent IOMMU DMA translation: It detaches any existing domain from the
device and puts it into a blocking state (some drivers might use the
identity state).
2) Resource release: It releases resources allocated during the
device_probe callback and restores the device to its pre-probe state.
Step 1 is challenging for individual iommu drivers because each must check
if a domain is already attached to the device. Additionally, if a deferred
attach never occurred, the device_release should avoid modifying hardware
configuration regardless of the reason for its call.
To simplify this process, introduce a static release_domain within the
iommu_ops structure. It can be either a blocking or identity domain
depending on the iommu hardware. The iommu core will decide whether to
attach this domain before the device_release callback, eliminating the
need for repetitive code in various drivers.
Consequently, the device_release callback can focus solely on the opposite
operations of device_probe, including releasing all resources allocated
during that callback.
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240305013305.204605-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Because surprise removal could happen anytime, e.g. user could request safe
removal to EP(endpoint device) via sysfs and brings its link down to do
surprise removal cocurrently. such aggressive cases would cause ATS
invalidation request issued to non-existence target device, then deadly
loop to retry that request after ITE fault triggered in interrupt context.
this patch aims to optimize the ITE handling by checking the target device
presence state to avoid retrying the timeout request blindly, thus avoid
hard lockup or system hang.
Devices TLB should only be invalidated when devices are in the
iommu->device_rbtree (probed, not released) and present.
Fixes: 6ba6c3a4cacf ("VT-d: add device IOTLB invalidation support")
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Link: https://lore.kernel.org/r/20240301080727.3529832-4-haifeng.zhao@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
For those endpoint devices connect to system via hotplug capable ports,
users could request a hot reset to the device by flapping device's link
through setting the slot's link control register, as pciehp_ist() DLLSC
interrupt sequence response, pciehp will unload the device driver and
then power it off. thus cause an IOMMU device-TLB invalidation (Intel
VT-d spec, or ATS Invalidation in PCIe spec r6.1) request for non-existence
target device to be sent and deadly loop to retry that request after ITE
fault triggered in interrupt context.
That would cause following continuous hard lockup warning and system hang
[ 4211.433662] pcieport 0000:17:01.0: pciehp: Slot(108): Link Down
[ 4211.433664] pcieport 0000:17:01.0: pciehp: Slot(108): Card not present
[ 4223.822591] NMI watchdog: Watchdog detected hard LOCKUP on cpu 144
[ 4223.822622] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
OE kernel version xxxx
[ 4223.822623] Hardware name: vendorname xxxx 666-106,
BIOS 01.01.02.03.01 05/15/2023
[ 4223.822623] RIP: 0010:qi_submit_sync+0x2c0/0x490
[ 4223.822624] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b
57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 1
0 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
[ 4223.822624] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
[ 4223.822625] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005
[ 4223.822625] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340
[ 4223.822625] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000
[ 4223.822626] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200
[ 4223.822626] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
[ 4223.822626] FS: 0000000000000000(0000) GS:ffffa237ae400000(0000)
knlGS:0000000000000000
[ 4223.822627] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4223.822627] CR2: 00007ffe86515d80 CR3: 000002fd3000a001 CR4: 0000000000770ee0
[ 4223.822627] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4223.822628] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 4223.822628] PKRU: 55555554
[ 4223.822628] Call Trace:
[ 4223.822628] qi_flush_dev_iotlb+0xb1/0xd0
[ 4223.822628] __dmar_remove_one_dev_info+0x224/0x250
[ 4223.822629] dmar_remove_one_dev_info+0x3e/0x50
[ 4223.822629] intel_iommu_release_device+0x1f/0x30
[ 4223.822629] iommu_release_device+0x33/0x60
[ 4223.822629] iommu_bus_notifier+0x7f/0x90
[ 4223.822630] blocking_notifier_call_chain+0x60/0x90
[ 4223.822630] device_del+0x2e5/0x420
[ 4223.822630] pci_remove_bus_device+0x70/0x110
[ 4223.822630] pciehp_unconfigure_device+0x7c/0x130
[ 4223.822631] pciehp_disable_slot+0x6b/0x100
[ 4223.822631] pciehp_handle_presence_or_link_change+0xd8/0x320
[ 4223.822631] pciehp_ist+0x176/0x180
[ 4223.822631] ? irq_finalize_oneshot.part.50+0x110/0x110
[ 4223.822632] irq_thread_fn+0x19/0x50
[ 4223.822632] irq_thread+0x104/0x190
[ 4223.822632] ? irq_forced_thread_fn+0x90/0x90
[ 4223.822632] ? irq_thread_check_affinity+0xe0/0xe0
[ 4223.822633] kthread+0x114/0x130
[ 4223.822633] ? __kthread_cancel_work+0x40/0x40
[ 4223.822633] ret_from_fork+0x1f/0x30
[ 4223.822633] Kernel panic - not syncing: Hard LOCKUP
[ 4223.822634] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
OE kernel version xxxx
[ 4223.822634] Hardware name: vendorname xxxx 666-106,
BIOS 01.01.02.03.01 05/15/2023
[ 4223.822634] Call Trace:
[ 4223.822634] <NMI>
[ 4223.822635] dump_stack+0x6d/0x88
[ 4223.822635] panic+0x101/0x2d0
[ 4223.822635] ? ret_from_fork+0x11/0x30
[ 4223.822635] nmi_panic.cold.14+0xc/0xc
[ 4223.822636] watchdog_overflow_callback.cold.8+0x6d/0x81
[ 4223.822636] __perf_event_overflow+0x4f/0xf0
[ 4223.822636] handle_pmi_common+0x1ef/0x290
[ 4223.822636] ? __set_pte_vaddr+0x28/0x40
[ 4223.822637] ? flush_tlb_one_kernel+0xa/0x20
[ 4223.822637] ? __native_set_fixmap+0x24/0x30
[ 4223.822637] ? ghes_copy_tofrom_phys+0x70/0x100
[ 4223.822637] ? __ghes_peek_estatus.isra.16+0x49/0xa0
[ 4223.822637] intel_pmu_handle_irq+0xba/0x2b0
[ 4223.822638] perf_event_nmi_handler+0x24/0x40
[ 4223.822638] nmi_handle+0x4d/0xf0
[ 4223.822638] default_do_nmi+0x49/0x100
[ 4223.822638] exc_nmi+0x134/0x180
[ 4223.822639] end_repeat_nmi+0x16/0x67
[ 4223.822639] RIP: 0010:qi_submit_sync+0x2c0/0x490
[ 4223.822639] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b
57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 10
74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
[ 4223.822640] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
[ 4223.822640] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005
[ 4223.822640] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340
[ 4223.822641] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000
[ 4223.822641] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200
[ 4223.822641] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
[ 4223.822641] ? qi_submit_sync+0x2c0/0x490
[ 4223.822642] ? qi_submit_sync+0x2c0/0x490
[ 4223.822642] </NMI>
[ 4223.822642] qi_flush_dev_iotlb+0xb1/0xd0
[ 4223.822642] __dmar_remove_one_dev_info+0x224/0x250
[ 4223.822643] dmar_remove_one_dev_info+0x3e/0x50
[ 4223.822643] intel_iommu_release_device+0x1f/0x30
[ 4223.822643] iommu_release_device+0x33/0x60
[ 4223.822643] iommu_bus_notifier+0x7f/0x90
[ 4223.822644] blocking_notifier_call_chain+0x60/0x90
[ 4223.822644] device_del+0x2e5/0x420
[ 4223.822644] pci_remove_bus_device+0x70/0x110
[ 4223.822644] pciehp_unconfigure_device+0x7c/0x130
[ 4223.822644] pciehp_disable_slot+0x6b/0x100
[ 4223.822645] pciehp_handle_presence_or_link_change+0xd8/0x320
[ 4223.822645] pciehp_ist+0x176/0x180
[ 4223.822645] ? irq_finalize_oneshot.part.50+0x110/0x110
[ 4223.822645] irq_thread_fn+0x19/0x50
[ 4223.822646] irq_thread+0x104/0x190
[ 4223.822646] ? irq_forced_thread_fn+0x90/0x90
[ 4223.822646] ? irq_thread_check_affinity+0xe0/0xe0
[ 4223.822646] kthread+0x114/0x130
[ 4223.822647] ? __kthread_cancel_work+0x40/0x40
[ 4223.822647] ret_from_fork+0x1f/0x30
[ 4223.822647] Kernel Offset: 0x6400000 from 0xffffffff81000000 (relocation
range: 0xffffffff80000000-0xffffffffbfffffff)
Such issue could be triggered by all kinds of regular surprise removal
hotplug operation. like:
1. pull EP(endpoint device) out directly.
2. turn off EP's power.
3. bring the link down.
etc.
this patch aims to work for regular safe removal and surprise removal
unplug. these hot unplug handling process could be optimized for fix the
ATS Invalidation hang issue by calling pci_dev_is_disconnected() in
function devtlb_invalidation_with_pasid() to check target device state to
avoid sending meaningless ATS Invalidation request to iommu when device is
gone. (see IMPLEMENTATION NOTE in PCIe spec r6.1 section 10.3.1)
For safe removal, device wouldn't be removed until the whole software
handling process is done, it wouldn't trigger the hard lock up issue
caused by too long ATS Invalidation timeout wait. In safe removal path,
device state isn't set to pci_channel_io_perm_failure in
pciehp_unconfigure_device() by checking 'presence' parameter, calling
pci_dev_is_disconnected() in devtlb_invalidation_with_pasid() will return
false there, wouldn't break the function.
For surprise removal, device state is set to pci_channel_io_perm_failure in
pciehp_unconfigure_device(), means device is already gone (disconnected)
call pci_dev_is_disconnected() in devtlb_invalidation_with_pasid() will
return true to break the function not to send ATS Invalidation request to
the disconnected device blindly, thus avoid to trigger further ITE fault,
and ITE fault will block all invalidation request to be handled.
furthermore retry the timeout request could trigger hard lockup.
safe removal (present) & surprise removal (not present)
pciehp_ist()
pciehp_handle_presence_or_link_change()
pciehp_disable_slot()
remove_board()
pciehp_unconfigure_device(presence) {
if (!presence)
pci_walk_bus(parent, pci_dev_set_disconnected, NULL);
}
this patch works for regular safe removal and surprise removal of ATS
capable endpoint on PCIe switch downstream ports.
Fixes: 6f7db75e1c46 ("iommu/vt-d: Add second level page table interface")
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Haorong Ye <yehaorong@bytedance.com>
Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Link: https://lore.kernel.org/r/20240301080727.3529832-3-haifeng.zhao@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree changes for v6.9
Support for the Samsung Galaxy Tab 4 10.1 LTE is added.
On MSM8226 CPU, SAW and ACC nodes are introduced to enable SMP support.
Watchdog definition is also added, and all nodes are sorted and cleaned
up.
rmtfs memory is defined on HTC One Mini 2, vibrator support is addedto
LG G Watch R, touch keycodes are defined for Samsung Galaxy Tab 4.
The Samsung Galaxy Tab 4 DeviceTree is refactored to allow more variants
to be introduced easily.
The SAW nodes across APQ8064, IPQ8064, MSM8960 and MSM8974 are updated
based on recent work on the binding and driver.
On IPQ8064 SAW nodes are cleaned up, and unused reset-names is dropped
from DWC3.
On MSM8960 GSBI3 and the I2C bus therein is introduced, in order to
introduce touchscreen support on the Samsung Galaxy Express SGH-I437.
gpio-keys are introduced on the same.
On MSM8974 the QFPROM register size is corrected. The order of the
clocks in the SDX65 DWC3 node is corrected to match the binding.
For a variety of platforms interrupt-related constants are replaced
with defined.
The mach-qcom Kconfig options are cleaned up, to avoid unnecessary
per-platform options.
* tag 'qcom-arm32-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
ARM: dts: qcom: samsung-matisse-common: Add UART
ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 LTE (SM-T535)
ARM: dts: qcom: samsung-matisse-common: Add initial common device tree
ARM: dts: qcom: ipq8064: drop 'regulator' property from SAW2 devices
ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices
ARM: dts: qcom: msm8974: drop 'regulator' property from SAW2 device
ARM: dts: qcom: apq8084: drop 'regulator' property from SAW2 device
ARM: dts: qcom: msm8960: declare SAW2 regulators
ARM: dts: qcom: apq8064: declare SAW2 regulators
ARM: dts: qcom: ipq8064: rename SAW nodes to power-manager
ARM: dts: qcom: ipq4019: rename SAW nodes to power-manager
ARM: dts: qcom: msm8974: rename SAW nodes to power-manager
ARM: dts: qcom: msm8960: rename SAW nodes to power-manager
ARM: dts: qcom: apq8084: rename SAW nodes to power-manager
ARM: dts: qcom: apq8064: rename SAW nodes to power-manager
ARM: dts: qcom: ipq8064: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: ipq4019: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: msm8960: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: msm8974: use new compat string for L2 SAW2 unit
ARM: dts: qcom: apq8084: use new compat string for L2 SAW2 unit
...
Link: https://lore.kernel.org/r/20240304033507.89751-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Four syzkaller found bugs:
- Corruption during error unwind in iommufd_access_change_ioas()
- Overlapping IDs in the test suite due to out of order destruction
- Missing locking for access->ioas in the test suite
- False failures in the test suite validation logic with huge pages"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Don't check map/unmap pairing with HUGE_PAGES
iommufd: Fix protection fault in iommufd_test_syz_conv_iova
iommufd/selftest: Fix mock_dev_num bug
iommufd: Fix iopt_access_list_id overwrite bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
Arm SMMU updates for 6.9
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2:
* Support for Qualcomm X1E80100 MDSS
- SMMUv3:
* Significant rework of the driver's STE manipulation and domain
handling code. This is the initial part of a larger scale rework
aiming to improve the driver's implementation of the IOMMU API
in preparation for hooking up IOMMUFD support.
|
|
iommu_sva_bind_device will directly goto out in multi-device
case when found existing domain, ignoring list_add handle,
which causes the handle to fail to be shared.
Fixes: 65d4418c5002 ("iommu/sva: Restore SVA handle sharing")
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240227064821.128-1-zhangfei.gao@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The existing I/O page fault handler currently locates the PCI device by
calling pci_get_domain_bus_and_slot(). This function searches the list
of all PCI devices until the desired device is found. To improve lookup
efficiency, replace it with device_rbtree_find() to search the device
within the probed device rbtree.
The I/O page fault is initiated by the device, which does not have any
synchronization mechanism with the software to ensure that the device
stays in the probed device tree. Theoretically, a device could be released
by the IOMMU subsystem after device_rbtree_find() and before
iopf_get_dev_fault_param(), which would cause a use-after-free problem.
Add a mutex to synchronize the I/O page fault reporting path and the IOMMU
release device path. This lock doesn't introduce any performance overhead,
as the conflict between I/O page fault reporting and device releasing is
very rare.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240220065939.121116-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Use a red-black tree(rbtree) to track devices probed by the driver's
probe_device callback. These devices need to be looked up quickly by
a source ID when the hardware reports a fault, either recoverable or
unrecoverable.
Fault reporting paths are critical. Searching a list in this scenario
is inefficient, with an algorithm complexity of O(n). An rbtree is a
self-balancing binary search tree, offering an average search time
complexity of O(log(n)). This significant performance improvement
makes rbtrees a better choice.
Furthermore, rbtrees are implemented on a per-iommu basis, eliminating
the need for global searches and further enhancing efficiency in
critical fault paths. The rbtree is protected by a spin lock with
interrupts disabled to ensure thread-safe access even within interrupt
contexts.
Co-developed-by: Huang Jiaqing <jiaqing.huang@intel.com>
Signed-off-by: Huang Jiaqing <jiaqing.huang@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240220065939.121116-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
intel_svm_set_dev_pasid() is the only caller of intel_svm_bind_mm().
Merge them and remove intel_svm_bind_mm(). No functional change
intended.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20240219125723.1645703-4-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The rcu_head structures allocated dynamically in the heap don't need any
initialization. Therefore, remove the init_rcu_head().
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20240219125723.1645703-3-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit 2f26e0a9c986 ("iommu/vt-d: Add basic SVM PASID support") added a
special treatment to mandate that no page faults may be outstanding for
the PASID after intel_svm_unbind_mm() is called, as the PASID will be
released and reused after unbind.
This is unnecessary anymore as no outstanding page faults have been
ensured in the driver's remove_dev_pasid path:
- Tear down the pasid entry, which guarantees that new page faults for
the PASID will be rejected by the iommu hardware.
- All outstanding page faults have been responded to.
- All hardware pending faults are drained in intel_drain_pasid_prq().
Remove this unnecessary code.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20240219125723.1645703-2-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1].
Here the multiplication is obviously safe because DMAR_LATENCY_NUM
is the number of latency types defined in the "latency_type" enum.
enum latency_type {
DMAR_LATENCY_INV_IOTLB = 0,
DMAR_LATENCY_INV_DEVTLB,
DMAR_LATENCY_INV_IEC,
DMAR_LATENCY_PRQ,
DMAR_LATENCY_NUM
};
However, using kcalloc() is more appropriate [2] and improves
readability. This patch has no effect on runtime behavior.
Link: https://github.com/KSPP/linux/issues/162 [1]
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [2]
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240211175143.9229-1-erick.archer@gmx.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit 62edf5dc4a524 ("intel-iommu: Restore DMAR_BROKEN_GFX_WA option for
broken graphics drivers") was introduced 24 years ago as a temporary
workaround for graphics drivers that used physical addresses for DMA and
avoided DMA APIs. This workaround was disabled by default.
As 24 years have passed, it is expected that graphics driver developers
have migrated their drivers to use kernel DMA APIs. Therefore, this
workaround is no longer required and could been removed.
The Intel iommu driver also provides a "igfx_off" option to turn off
the DMA translation for the graphic dedicated IOMMU. Hence, there is
really no good reason to keep this config option.
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240130060823.57990-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
iommu_ops_from_fwnode() stores &iommu_spec->np->fwnode in local
variable, so use it to simplify the code (iommu_spec is not changed
between these dereferences).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216144027.185959-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Make pointer to fwnode_handle a pointer to const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216144027.185959-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216144027.185959-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Make pointer to bus_type a pointer to const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240216144027.185959-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Now that the BLOCKED and IDENTITY behaviors are managed with their own
domains change to the domain_alloc_paging() op.
For now SVA remains using the old interface, eventually it will get its
own op that can pass in the device and mm_struct which will let us have a
sane lifetime for the mmu_notifier.
Call arm_smmu_domain_finalise() early if dev is available.
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/16-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Instead of putting container_of() casts in the internals, use the proper
type in this call chain. This makes it easier to check that the two global
static domains are not leaking into call chains they should not.
Passing the smmu avoids the only caller from having to set it and unset it
in the error path.
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/15-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Consolidate some more code by having release call
arm_smmu_attach_dev_identity/blocked() instead of open coding this.
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/14-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Using the same design as the IDENTITY domain install an
STRTAB_STE_0_CFG_ABORT STE.
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/13-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
