summaryrefslogtreecommitdiff
path: root/drivers/irqchip/irq-mbigen.c
AgeCommit message (Collapse)AuthorFilesLines
2020-04-17irqchip/mbigen: Free msi_desc on device teardownZenghui Yu1-1/+7
Using irq_domain_free_irqs_common() on the irqdomain free path will leave the MSI descriptor unfreed when platform devices get removed. Properly free it by MSI domain free function. Fixes: 9650c60ebfec0 ("irqchip/mbigen: Create irq domain for each mbigen device") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200408114352.1604-1-yuzenghui@huawei.com
2020-01-20irqchip/mbigen: Set driver .suppress_bind_attrs to avoid remove problemsJohn Garry1-0/+1
The following crash can be seen for setting CONFIG_DEBUG_TEST_DRIVER_REMOVE=y for DT FW (which some people still use): Hisilicon MBIGEN-V2 60080000.interrupt-controller: Failed to create mbi-gen irqdomain Hisilicon MBIGEN-V2: probe of 60080000.interrupt-controller failed with error -12 [...] Unable to handle kernel paging request at virtual address 0000000000005008 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000041fb9990000 [0000000000005008] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6-00002-g3fc42638a506-dirty #1622 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018 pstate: 40000085 (nZcv daIf -PAN -UAO) pc : mbigen_set_type+0x38/0x60 lr : __irq_set_trigger+0x6c/0x188 sp : ffff800014b4b400 x29: ffff800014b4b400 x28: 0000000000000007 x27: 0000000000000000 x26: 0000000000000000 x25: ffff041fd83bd0d4 x24: ffff041fd83bd188 x23: 0000000000000000 x22: ffff80001193ce00 x21: 0000000000000004 x20: 0000000000000000 x19: ffff041fd83bd000 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000119098c8 x14: ffff041fb94ec91c x13: ffff041fb94ec1a1 x12: 0000000000000030 x11: 0101010101010101 x10: 0000000000000040 x9 : 0000000000000000 x8 : ffff041fb98c6680 x7 : ffff800014b4b380 x6 : ffff041fd81636c8 x5 : 0000000000000000 x4 : 000000000000025f x3 : 0000000000005000 x2 : 0000000000005008 x1 : 0000000000000004 x0 : 0000000080000000 Call trace: mbigen_set_type+0x38/0x60 __setup_irq+0x744/0x900 request_threaded_irq+0xe0/0x198 pcie_pme_probe+0x98/0x118 pcie_port_probe_service+0x38/0x78 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 device_add+0x4c4/0x770 device_register+0x1c/0x28 pcie_port_device_register+0x1e4/0x4f0 pcie_portdrv_probe+0x34/0xd8 local_pci_probe+0x3c/0xa0 pci_device_probe+0x128/0x1c0 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_attach+0x10/0x18 pci_bus_add_device+0x4c/0xb8 pci_bus_add_devices+0x38/0x88 pci_host_probe+0x3c/0xc0 pci_host_common_probe+0xf0/0x208 hisi_pcie_almost_ecam_probe+0x24/0x30 platform_drv_probe+0x50/0xa0 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 device_driver_attach+0x6c/0x90 __driver_attach+0x84/0xc8 bus_for_each_dev+0x74/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x148/0x1f0 driver_register+0x60/0x110 __platform_driver_register+0x40/0x48 hisi_pcie_almost_ecam_driver_init+0x1c/0x24 The specific problem here is that the mbigen driver real probe has failed as the mbigen_of_create_domain()->of_platform_device_create() call fails, the reason for that being that we never destroyed the platform device created during the remove test dry run and there is some conflict. Since we generally would never want to unbind this driver, and to save adding a driver tear down path for that, just set the driver .suppress_bind_attrs member to avoid this possibility. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1579196323-180137-1-git-send-email-john.garry@huawei.com
2019-08-01Merge tag 'irqchip-fixes-5.3' of ↵Thomas Gleixner1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: A small bunch of fixes from the irqchip department: - Fix a couple of UAF on error paths (RZA1, GICv3 ITS) - Fix iMX GPCv2 trigger setting - Add missing of_node_put on error path in MBIGEN - Add another bunch of /* fall-through */ to silence warnings
2019-07-26irqchip/irq-mbigen: Add of_node_put() before returnNishka Dasgupta1-2/+7
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Add an of_node_put before the return in three places. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-07-08Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement provides the usual mixed bag: Core: - Further improvements to the irq timings code which aims to predict the next interrupt for power state selection to achieve better latency/power balance - Add interrupt statistics to the core NMI handlers - The usual small fixes and cleanups Drivers: - Support for Renesas RZ/A1, Annapurna Labs FIC, Meson-G12A SoC and Amazon Gravition AMR/GIC interrupt controllers. - Rework of the Renesas INTC controller driver - ACPI support for Socionext SoCs - Enhancements to the CSKY interrupt controller - The usual small fixes and cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) irq/irqdomain: Fix comment typo genirq: Update irq stats from NMI handlers irqchip/gic-pm: Remove PM_CLK dependency irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FIC softirq: Use __this_cpu_write() in takeover_tasklets() irqchip/mbigen: Stop printing kernel addresses irqchip/gic: Add dependency for ARM_GIC_MAX_NR genirq/affinity: Remove unused argument from [__]irq_build_affinity_masks() genirq/timings: Add selftest for next event computation genirq/timings: Add selftest for irqs circular buffer genirq/timings: Add selftest for circular array genirq/timings: Encapsulate storing function genirq/timings: Encapsulate timings push genirq/timings: Optimize the period detection speed genirq/timings: Fix timings buffer inspection genirq/timings: Fix next event index function irqchip/qcom: Use struct_size() in devm_kzalloc() irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler dt-bindings: interrupt-controller: Update csky mpintc ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18irqchip/mbigen: Stop printing kernel addressesKefeng Wang1-2/+1
After commit ad67b74d2469d9b8 ("printk: hash addresses printed with %p"), it will print "____ptrval____" instead of actual addresses when mbigen create domain fails, Hisilicon MBIGEN-V2 HISI0152:00: Failed to create mbi-gen@(____ptrval____) irqdomain Hisilicon MBIGEN-V2: probe of HISI0152:00 failed with error -12 dev_xxx() helper contains the device info, HISI0152:00, which stands for mbigen ACPI HID and its UID, we can identify the failing probed mbigen, so just remove the printing "mgn_chip->base", and also add missing "\n". Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-21irqchip/mbigen: Don't clear eventid when freeing an MSIJianguo Chen1-0/+3
mbigen_write_msg clears eventid bits of a mbigen register when free a interrupt, because msi_domain_deactivate memset struct msg to zero. Then multiple mbigen pins with zero eventid will report the same interrupt number. The eventid clear call trace: free_irq __free_irq irq_shutdown irq_domain_deactivate_irq __irq_domain_deactivate_irq __irq_domain_deactivate_irq msi_domain_deactivate platform_msi_write_msg mbigen_write_msg Signed-off-by: Jianguo Chen <chenjianguo3@huawei.com> [maz: massaged subject] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-22irqchip/irq-mbigen: Constify irq_domain_opsTobias Klauser1-1/+1
struct irq_domain_ops is not modified, so it can be made const. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-12irqchip/mbigen: Fix the clear register offset calculationMaJun1-4/+1
The register array offset for clearing an interrupt is calculated by: offset = (hwirq - RESERVED_IRQ_PER_MBIGEN_CHIP) / 32; This is wrong because the clear register array includes the reserved interrupts. So the clear operation ends up in the wrong register. This went unnoticed so far, because the hardware clears the real bit through a timeout mechanism when the hardware is configured in debug mode. That debug mode was enabled on early generations of the hardware, so the problem was papered over. On newer hardware with updated firmware the debug mode was disabled, so the bits did not get cleared which causes the system to malfunction. Remove the subtraction of RESERVED_IRQ_PER_MBIGEN_CHIP, so the correct register is accessed. [ tglx: Rewrote changelog ] Fixes: a6c2f87b8820 ("irqchip/mbigen: Implement the mbigen irq chip operation functions") Signed-off-by: MaJun <majun258@huawei.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: linuxarm@huawei.com Cc: Wei Yongjun <weiyongjun1@huawei.com> Link: http://lkml.kernel.org/r/1494561328-39514-4-git-send-email-guohanjun@huawei.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-05-12irqchip/mbigen: Fix potential NULL dereferencingHanjun Guo1-0/+3
platform_get_resource() may return NULL, add proper check to avoid potential NULL dereferencing. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: linuxarm@huawei.com Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: MaJun <majun258@huawei.com> Link: http://lkml.kernel.org/r/1494561328-39514-3-git-send-email-guohanjun@huawei.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-05-12irqchip/mbigen: Fix memory mapping codeHanjun Guo1-3/+6
Some mbigens share memory regions, and devm_ioremap_resource does not allow to share resources which will break the probe of mbigen, in opposition to devm_ioremap. This patch restores back usage of devm_ioremap function, but with proper error handling and logging. Fixes: 216646e4d82e ("irqchip/mbigen: Fix return value check in mbigen_device_probe()") Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: linuxarm@huawei.com Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: MaJun <majun258@huawei.com> Link: http://lkml.kernel.org/r/1494561328-39514-2-git-send-email-guohanjun@huawei.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-30irqchip/mbigen: Fix return value check in mbigen_device_probe()Wei Yongjun1-2/+1
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). Use devm_ioremap_resource() instead of devm_ioremap() to fix the IS_ERR() test issue. Fixes: 76e1f77f9c26 ("irqchip/mbigen: Introduce mbigen_of_create_domain()") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/20170427152113.31147-1-weiyj.lk@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-07irqchip/mbigen: Add ACPI supportHanjun Guo1-3/+72
With the preparation of platform msi support and interrupt producer in commit d44fa3d46079 ("ACPI: Add support for ResourceSource/IRQ domain mapping"), we can add mbigen ACPI support now. Now that the major framework changes are ready, we just need to add the ACPI probe code which creates the irqdomain for devices connecting to it. In order to create the irqdomain, we need to know the number of hw irqs as input which is provided by mbigen. In DT case, we are using "num-pins" property to describe it, and we will take advantage of that too using _DSD in ACPI as there is no standard way of describe it in ACPI way, also according to the _DSD rule described in Documentation/acpi/DSD-properties-rules.txt, it doesn't break the rules. The DSDT is represented as below: For mbigen, Device(MBI0) { Name(_HID, "HISI0152") Name(_UID, Zero) Name(_CRS, ResourceTemplate() { Memory32Fixed(ReadWrite, 0xa0080000, 0x10000) }) Name(_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"num-pins", 378} } }) } For devices, Device(SAS0) { Name(_HID, "HISIxxxx") Name(_UID, Zero) Name(_CRS, ResourceTemplate() { Memory32Fixed(ReadWrite, 0xb0030000, 0x10000) Interrupt(ResourceConsumer,..., "\_SB.MBI0") {12, ...} }) } So for the devices connected to the mbigen, as we clearly say that it refers to a specific interrupt controller (mbigen), we can get the virq from mbigen's irqdomain once it's created successfully. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: MaJun <majun258@huawei.com> Cc: Al Stone <ahs3@redhat.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07irqchip/mbigen: Introduce mbigen_of_create_domain()Kefeng Wang1-15/+28
Introduce mbigen_of_create_domain() to consolidate OF related code and prepare for ACPI later, no funtional change. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Ma Jun <majun258@huawei.com> Tested-by: Ming Lei <ming.lei@canonical.com> Tested-by: Wei Xu <xuwei5@hisilicon.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07irqchip/mbigen: Drop module ownerKefeng Wang1-1/+0
Module owner will be set by driver core, so drop it. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Ma Jun <majun258@huawei.com> Tested-by: Ming Lei <ming.lei@canonical.com> Tested-by: Wei Xu <xuwei5@hisilicon.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/mbigen: Checking for IS_ERR() instead of NULLDan Carpenter1-2/+2
of_platform_device_create() returns NULL on error, it never returns error pointers. Fixes: ed2a1002d25c ('irqchip/mbigen: Handle multiple device nodes in a mbigen module') Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-21irqchip/mbigen: Handle multiple device nodes in a mbigen moduleMaJun1-14/+24
Each mbigen device is represented as a independent platform device. If the devices belong to the same mbigen hardware module, then the register space for these devices is the same. That leads to a resource conflict. The solution for this is to represent the mbigen module as a platform device and make the mbigen devices subdevices of that. The register space is associated to the mbigen module and therefor the resource conflict is avoided. [ tglx: Massaged changelog, cleaned up the code and removed the silly printk ] Signed-off-by: Ma Jun <majun258@huawei.com> Cc: mark.rutland@arm.com Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: Catalin.Marinas@arm.com Cc: guohanjun@huawei.com Cc: Will.Deacon@arm.com Cc: huxinwei@huawei.com Cc: lizefan@huawei.com Cc: dingtianhong@huawei.com Cc: zhaojunhua@hisilicon.com Cc: liguozhu@hisilicon.com Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1458203641-17172-3-git-send-email-majun258@huawei.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-18irqchip/mbigen: Implement the mbigen irq chip operation functionsMa Jun1-0/+81
Add the interrupt controller chip operation functions of mbigen chip. Signed-off-by: Ma Jun <majun258@huawei.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-18irqchip/mbigen: Create irq domain for each mbigen deviceMa Jun1-0/+138
For peripheral devices which connect to mbigen,mbigen is a interrupt controller. So, we create irq domain for each mbigen device and add mbigen irq domain into irq hierarchy structure. Signed-off-by: Ma Jun <majun258@huawei.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-18irqchip/mgigen: Add platform device driver for mbigen deviceMa Jun1-0/+78
Mbigen means Message Based Interrupt Generator(MBIGEN). Its a kind of interrupt controller that collects the interrupts from external devices and generate msi interrupt. Mbigen is applied to reduce the number of wire connected interrupts. As the peripherals increasing, the interrupts lines needed is increasing much, especially on the Arm64 server SOC. Therefore, the interrupt pin in GIC is not enough to cover so many peripherals. Mbigen is designed to fix this problem. Mbigen chip locates in ITS or outside of ITS. Mbigen chip hardware structure shows as below: mbigen chip |---------------------|-------------------| mgn_node0 mgn_node1 mgn_node2 | |-------| |-------|------| dev1 dev1 dev2 dev1 dev3 dev4 Each mbigen chip contains several mbigen nodes. External devices can connect to mbigen node through wire connecting way. Because a mbigen node only can support 128 interrupt maximum, depends on the interrupt lines number of devices, a device can connects to one more mbigen nodes. Also, several different devices can connect to a same mbigen node. When devices triggered interrupt,mbigen chip detects and collects the interrupts and generates the MBI interrupts by writing the ITS Translator register. To simplify mbigen driver,I used a new conception--mbigen device. Each mbigen device is initialized as a platform device. Mbigen device presents the parts(register, pin definition etc.) in mbigen chip corresponding to a peripheral device. So from software view, the structure likes below mbigen chip |---------------------|-----------------| mbigen device1 mbigen device2 mbigen device3 | | | dev1 dev2 dev3 Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ma Jun <majun258@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>