summaryrefslogtreecommitdiff
path: root/drivers/md/dm-ioctl.c
AgeCommit message (Collapse)AuthorFilesLines
2015-08-05char: make misc_deregister a void functionGreg Kroah-Hartman1-3/+1
With well over 200+ users of this api, there are a mere 12 users that actually checked the return value of this function. And all of them really didn't do anything with that information as the system or module was shutting down no matter what. So stop pretending like it matters, and just return void from misc_deregister(). If something goes wrong in the call, you will get a WARNING splat in the syslog so you know how to fix up your driver. Other than that, there's nothing that can go wrong. Cc: Alasdair Kergon <agk@redhat.com> Cc: Neil Brown <neilb@suse.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Christine Caulfield <ccaulfie@redhat.com> Cc: David Teigland <teigland@redhat.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-30dm: only initialize the request_queue onceChristoph Hellwig1-8/+9
Commit bfebd1cdb4 ("dm: add full blk-mq support to request-based DM") didn't properly account for the need to short-circuit re-initializing DM's blk-mq request_queue if it was already initialized. Otherwise, reloading a blk-mq request-based DM table (either manually or via multipathd) resulted in errors, see: https://www.redhat.com/archives/dm-devel/2015-April/msg00132.html Fix is to only initialize the request_queue on the initial table load (when the mapped_device type is assigned). This is better than having dm_init_request_based_blk_mq_queue() return early if the queue was already initialized because it elevates the constraint to a more meaningful location in DM core. As such the pre-existing early return in dm_init_request_based_queue() can now be removed. Fixes: bfebd1cdb4 ("dm: add full blk-mq support to request-based DM") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-09dm ioctl: fix stale comment above dm_get_inactive_table()Junxiao Bi1-2/+2
dm_table_put() was replaced by dm_put_live_table(). Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-11-19dm: enhance internal suspend and resume interfaceMike Snitzer1-1/+4
Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-06dm: allow active and inactive tables to share dm_devsBenjamin Marzinski1-1/+1
Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-11-10dm: allow remove to be deferredMikulas Patocka1-6/+30
This patch allows the removal of an open device to be deferred until it is closed. (Previously such a removal attempt would fail.) The deferred remove functionality is enabled by setting the flag DM_DEFERRED_REMOVE in the ioctl structure on DM_DEV_REMOVE or DM_REMOVE_ALL ioctl. On return from DM_DEV_REMOVE, the flag DM_DEFERRED_REMOVE indicates if the device was removed immediately or flagged to be removed on close - if the flag is clear, the device was removed. On return from DM_DEV_STATUS and other ioctls, the flag DM_DEFERRED_REMOVE is set if the device is scheduled to be removed on closure. A device that is scheduled to be deleted can be revived using the message "@cancel_deferred_remove". This message clears the DMF_DEFERRED_REMOVE flag so that the device won't be deleted on close. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-09-06dm: add statistics supportMikulas Patocka1-8/+14
Support the collection of I/O statistics on user-defined regions of a DM device. If no regions are defined no statistics are collected so there isn't any performance impact. Only bio-based DM devices are currently supported. Each user-defined region specifies a starting sector, length and step. Individual statistics will be collected for each step-sized area within the range specified. The I/O statistics counters for each step-sized area of a region are in the same format as /sys/block/*/stat or /proc/diskstats but extra counters (12 and 13) are provided: total time spent reading and writing in milliseconds. All these counters may be accessed by sending the @stats_print message to the appropriate DM device via dmsetup. The creation of DM statistics will allocate memory via kmalloc or fallback to using vmalloc space. At most, 1/4 of the overall system memory may be allocated by DM statistics. The admin can see how much memory is used by reading /sys/module/dm_mod/parameters/stats_current_allocated_bytes See Documentation/device-mapper/statistics.txt for more details. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-06dm ioctl: cleanup error handling in table_loadMike Snitzer1-18/+16
Make use of common cleanup code. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-06dm ioctl: increase granularity of type_lock when loading tableMike Snitzer1-2/+4
Hold the mapped device's type_lock before calling populate_table() since it is where the table's type is determined based on the specified targets. There is no need to allow concurrent table loads to race to establish the table's targets or type. This eliminates the need to grab the lock in dm_table_set_type(). Also verify that the type_lock is held in both dm_set_md_type() and dm_get_md_type(). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-06dm ioctl: prevent rename to empty name or uuidAlasdair Kergon1-1/+1
A device-mapper device must always have a name consisting of a non-empty string. If the device also has a uuid, this similarly must not be an empty string. The DM_DEV_CREATE ioctl enforces these rules when the device is created, but this patch is needed to enforce them when DM_DEV_RENAME is used to change the name or uuid. Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com>
2013-07-11dm: optimize use SRCU and RCUMikulas Patocka1-40/+82
This patch removes "io_lock" and "map_lock" in struct mapped_device and "holders" in struct dm_table and replaces these mechanisms with sleepable-rcu. Previously, the code would call "dm_get_live_table" and "dm_table_put" to get and release table. Now, the code is changed to call "dm_get_live_table" and "dm_put_live_table". dm_get_live_table locks sleepable-rcu and dm_put_live_table unlocks it. dm_get_live_table_fast/dm_put_live_table_fast can be used instead of dm_get_live_table/dm_put_live_table. These *_fast functions use non-sleepable RCU, so the caller must not block between them. If the code changes active or inactive dm table, it must call dm_sync_table before destroying the old table. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-07-11dm: use __GFP_HIGHMEM in __vmallocMikulas Patocka1-1/+1
Use __GFP_HIGHMEM in __vmalloc. Pages allocated with __vmalloc can be allocated in high memory that is not directly mapped to kernel space, so use __GFP_HIGHMEM just like vmalloc does. This patch reduces memory pressure slightly because pages can be allocated in the high zone. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-07-11dm ioctl: set noio flag to avoid __vmalloc deadlockMikulas Patocka1-0/+3
Set noio flag while calling __vmalloc() because it doesn't fully respect gfp flags to avoid a possible deadlock (see commit 502624bdad3dba45dfaacaf36b7d83e39e74b2d2). This should be backported to stable kernels 3.8 and newer. The kernel 3.8 doesn't have memalloc_noio_save(), so we should set and restore process flag PF_MEMALLOC instead. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-02dm ioctl: allow message to return dataMikulas Patocka1-1/+35
This patch introduces enhanced message support that allows the device-mapper core to recognise messages that are common to all devices, and for messages to return data to userspace. Core messages are processed by the function "message_for_md". If the device mapper doesn't support the message, it is passed to the target driver. If the message returns data, the kernel sets the flag DM_MESSAGE_OUT_FLAG. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-02dm ioctl: optimize functions without variable paramsMikulas Patocka1-18/+34
Device-mapper ioctls receive and send data in a buffer supplied by userspace. The buffer has two parts. The first part contains a 'struct dm_ioctl' and has a fixed size. The second part depends on the ioctl and has a variable size. This patch recognises the specific ioctls that do not use the variable part of the buffer and skips allocating memory for it. In particular, when a device is suspended and a resume ioctl is sent, this now avoid memory allocation completely. The variable "struct dm_ioctl tmp" is moved from the function copy_params to its caller ctl_ioctl and renamed to param_kernel. It is used directly when the ioctl function doesn't need any arguments. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-02dm ioctl: introduce ioctl_flagsMikulas Patocka1-23/+41
This patch introduces flags for each ioctl function. So far, one flag is defined, IOCTL_FLAGS_NO_PARAMS. It is set if the function processing the ioctl doesn't take or produce any parameters in the section of the data buffer that has a variable size. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-02dm: fix truncated status stringsMikulas Patocka1-5/+9
Avoid returning a truncated table or status string instead of setting the DM_BUFFER_FULL_FLAG when the last target of a table fills the buffer. When processing a table or status request, the function retrieve_status calls ti->type->status. If ti->type->status returns non-zero, retrieve_status assumes that the buffer overflowed and sets DM_BUFFER_FULL_FLAG. However, targets don't return non-zero values from their status method on overflow. Most targets returns always zero. If a buffer overflow happens in a target that is not the last in the table, it gets noticed during the next iteration of the loop in retrieve_status; but if a buffer overflow happens in the last target, it goes unnoticed and erroneously truncated data is returned. In the current code, the targets behave in the following way: * dm-crypt returns -ENOMEM if there is not enough space to store the key, but it returns 0 on all other overflows. * dm-thin returns errors from the status method if a disk error happened. This is incorrect because retrieve_status doesn't check the error code, it assumes that all non-zero values mean buffer overflow. * all the other targets always return 0. This patch changes the ti->type->status function to return void (because most targets don't use the return code). Overflow is detected in retrieve_status: if the status method fills up the remaining space completely, it is assumed that buffer overflow happened. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-22dm ioctl: use kmalloc if possibleMikulas Patocka1-13/+32
If the parameter buffer is small enough, try to allocate it with kmalloc() rather than vmalloc(). vmalloc is noticeably slower than kmalloc because it has to manipulate page tables. In my tests, on PA-RISC this patch speeds up activation 13 times. On Opteron this patch speeds up activation by 5%. This patch introduces a new function free_params() to free the parameters and this uses new flags that record whether or not vmalloc() was used and whether or not the input buffer must be wiped after use. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-22dm ioctl: remove PF_MEMALLOCMikulas Patocka1-9/+4
When allocating memory for the userspace ioctl data, set some appropriate GPF flags directly instead of using PF_MEMALLOC. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-22dm ioctl: prevent unsafe change to dm_ioctl data_sizeAlasdair G Kergon1-0/+8
Abort dm ioctl processing if userspace changes the data_size parameter after we validated it but before we finished copying the data buffer from userspace. The dm ioctl parameters are processed in the following sequence: 1. ctl_ioctl() calls copy_params(); 2. copy_params() makes a first copy of the fixed-sized portion of the userspace parameters into the local variable "tmp"; 3. copy_params() then validates tmp.data_size and allocates a new structure big enough to hold the complete data and copies the whole userspace buffer there; 4. ctl_ioctl() reads userspace data the second time and copies the whole buffer into the pointer "param"; 5. ctl_ioctl() reads param->data_size without any validation and stores it in the variable "input_param_size"; 6. "input_param_size" is further used as the authoritative size of the kernel buffer. The problem is that userspace code could change the contents of user memory between steps 2 and 4. In particular, the data_size parameter can be changed to an invalid value after the kernel has validated it. This lets userspace force the kernel to access invalid kernel memory. The fix is to ensure that the size has not changed at step 4. This patch shouldn't have a security impact because CAP_SYS_ADMIN is required to run this code, but it should be fixed anyway. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: stable@kernel.org
2012-07-27dm thin: commit before gathering statusAlasdair G Kergon1-1/+4
Commit outstanding metadata before returning the status for a dm thin pool so that the numbers reported are as up-to-date as possible. The commit is not performed if the device is suspended or if the DM_NOFLUSH_FLAG is supplied by userspace and passed to the target through a new 'status_flags' parameter in the target's dm_status_fn. The userspace dmsetup tool will support the --noflush flag with the 'dmsetup status' and 'dmsetup wait' commands from version 1.02.76 onwards. Tested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28dm: reject trailing characters in sccanf inputMikulas Patocka1-2/+3
Device mapper uses sscanf to convert arguments to numbers. The problem is that the way we use it ignores additional unmatched characters in the scanned string. For example, this `if (sscanf(string, "%d", &number) == 1)' will match a number, but also it will match number with some garbage appended, like "123abc". As a result, device mapper accepts garbage after some numbers. For example the command `dmsetup create vg1-new --table "0 16384 linear 254:1bla 34816bla"' will pass without an error. This patch fixes all sscanf uses in device mapper. It appends "%c" with a pointer to a dummy character variable to every sscanf statement. The construct `if (sscanf(string, "%d%c", &number, &dummy) == 1)' succeeds only if string is a null-terminated number (optionally preceded by some whitespace characters). If there is some character appended after the number, sscanf matches "%c", writes the character to the dummy variable and returns 2. We check the return value for 1 and consequently reject numbers with some garbage appended. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm ioctl: do not leak argv if target message only contains whitespaceJesper Juhl1-1/+1
If 'argc' is zero we jump to the 'out:' label, but this leaks the (unused) memory that 'dm_split_args()' allocated for 'argv' if the string being split consisted entirely of whitespace. Jump to the 'out_argv:' label instead to free up that memory. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-11-01dm table: add immutable featureAlasdair G Kergon1-0/+11
Introduce DM_TARGET_IMMUTABLE to indicate that the target type cannot be mixed with any other target type, and once loaded into a device, it cannot be replaced with a table containing a different type. The thin provisioning pool device will use this. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm ioctl: forbid multiple device specifiersMikulas Patocka1-0/+6
Exactly one of name, uuid or device must be specified when referencing an existing device. This removes the ambiguity (risking the wrong device being updated) if two conflicting parameters were specified. Previously one parameter got used and any others were ignored silently. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm ioctl: introduce __get_dev_cellMikulas Patocka1-17/+24
Move logic to find device based on major/minor number to a separate function __get_dev_cell (similar to __get_uuid_cell and __get_name_cell). This makes the function __find_device_hash_cell more straightforward. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm ioctl: fill in device parameters in more ioctlsMikulas Patocka1-27/+36
Move parameter filling from find_device to __find_device_hash_cell. This patch causes ioctls using __find_device_hash_cell (DM_DEV_REMOVE_CMD, DM_DEV_SUSPEND_CMD - resume, DM_TABLE_CLEAR_CMD) to return device parameters, bringing them into line with the other ioctls. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm ioctl: prevent empty messageAlasdair G Kergon1-0/+5
Detect invalid empty messages in core dm instead of requiring every target to check this. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-03-24dm ioctl: add flag to wipe buffers for secure dataMilan Broz1-2/+21
Add DM_SECURE_DATA_FLAG which userspace can use to ensure that all buffers allocated for dm-ioctl are wiped immediately after use. The user buffer is wiped as well (we do not want to keep and return sensitive data back to userspace if the flag is set). Wiping is useful for cryptsetup to ensure that the key is present in memory only in defined places and only for the time needed. (For crypt, key can be present in table during load or table status, wait and message commands). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-03-24dm ioctl: prepare for crypt key wipingMilan Broz1-14/+11
Prepare code for implementing buffer wipe flag. No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13dm ioctl: suppress needless warning messagesMilan Broz1-4/+4
The device-mapper should not send warning messages to syslog if a device is not found. This can be done by userspace according to the returned dm-ioctl error code. So move these messages to debug level and use rate limiting to not flood syslog. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13dm ioctl: allow rename to fill empty uuidPeter Jones1-25/+78
Allow the uuid of a mapped device to be set after device creation. Previously the uuid (which is optional) could only be set by DM_DEV_CREATE. If no uuid was supplied it could not be set later. Sometimes it's necessary to create the device before the uuid is known, and in such cases the uuid must be filled in after the creation. This patch extends DM_DEV_RENAME to accept a uuid accompanied by a new flag DM_UUID_FLAG. This can only be done once and if no uuid was previously supplied. It cannot be used to change an existing uuid. DM_VERSION_MINOR is also bumped to 19 to indicate this interface extension is available. Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann1-0/+1
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-12dm: allow autoloading of dm modPeter Rajnoha1-2/+5
Add devname:mapper/control and MAPPER_CTRL_MINOR module alias to support dm-mod module autoloading. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12dm ioctl: refactor dm_table_completeWill Drewry1-34/+0
This change unifies the various checks and finalization that occurs on a table prior to use. By doing so, it allows table construction without traversing the dm-ioctl interface. Signed-off-by: Will Drewry <wad@chromium.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12dm: do not initialise full request queue when bio basedMike Snitzer1-1/+10
Change bio-based mapped devices no longer to have a fully initialized request_queue (request_fn, elevator, etc). This means bio-based DM devices no longer register elevator sysfs attributes ('iosched/' tree or 'scheduler' other than "none"). In contrast, a request-based DM device will continue to have a full request_queue and will register elevator sysfs attributes. Therefore a user can determine a DM device's type by checking if elevator sysfs attributes exist. First allocate a minimalist request_queue structure for a DM device (needed for both bio and request-based DM). Initialization of a full request_queue is deferred until it is known that the DM device is request-based, at the end of the table load sequence. Factor DM device's request_queue initialization: - common to both request-based and bio-based into dm_init_md_queue(). - specific to request-based into dm_init_request_based_queue(). The md->type_lock mutex is used to protect md->queue, in addition to md->type, during table_load(). A DM device's first table_load will establish the immutable md->type. But md->queue initialization, based on md->type, may fail at that time (because blk_init_allocated_queue cannot allocate memory). Therefore any subsequent table_load must (re)try dm_setup_md_queue independently of establishing md->type. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12dm ioctl: make bio or request based device type immutableMike Snitzer1-0/+15
Determine whether a mapped device is bio-based or request-based when loading its first (inactive) table and don't allow that to be changed later. This patch performs different device initialisation in each of the two cases. (We don't think it's necessary to add code to support changing between the two types.) Allowed md->type transitions: DM_TYPE_NONE to DM_TYPE_BIO_BASED DM_TYPE_NONE to DM_TYPE_REQUEST_BASED We now prevent table_load from replacing the inactive table with a conflicting type of table even after an explicit table_clear. Introduce 'type_lock' into the struct mapped_device to protect md->type and to prepare for the next patch that will change the queue initialization and allocate memory while md->type_lock is held. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> drivers/md/dm-ioctl.c | 15 +++++++++++++++ drivers/md/dm.c | 37 ++++++++++++++++++++++++++++++------- drivers/md/dm.h | 5 +++++ include/linux/dm-ioctl.h | 4 ++-- 4 files changed, 52 insertions(+), 9 deletions(-)
2010-08-12dm ioctl: use nonseekable_openArnd Bergmann1-0/+1
The dm control device does not implement read/write, so it has no use for seeking. Using no_llseek prevents falling back to default_llseek, which requires the BKL. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12dm: separate device deletion from dm_putKiyoshi Ueda1-4/+11
This patch separates the device deletion code from dm_put() to make sure the deletion happens in the process context. By this patch, device deletion always occurs in an ioctl (process) context and dm_put() can be called in interrupt context. As a result, the request-based dm's bad dm_put() usage pointed out by Mikulas below disappears. http://marc.info/?l=dm-devel&m=126699981019735&w=2 Without this patch, I confirmed there is a case to crash the system: dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt()) Some more backgrounds and details: In request-based dm, a device opener can remove a mapped_device while the last request is still completing, because bios in the last request complete first and then the device opener can close and remove the mapped_device before the last request completes: CPU0 CPU1 ================================================================= <<INTERRUPT>> blk_end_request_all(clone_rq) blk_update_request(clone_rq) bio_endio(clone_bio) == end_clone_bio blk_update_request(orig_rq) bio_endio(orig_bio) <<I/O completed>> dm_blk_close() dev_remove() dm_put(md) <<Free md>> blk_finish_request(clone_rq) .... dm_end_request(clone_rq) free_rq_clone(clone_rq) blk_end_request_all(orig_rq) rq_completed(md) So request-based dm used dm_get()/dm_put() to hold md for each I/O until its request completion handling is fully done. However, the final dm_put() can call the device deletion code which must not be run in interrupt context and may cause kernel panic. To solve the problem, this patch moves the device deletion code, dm_destroy(), to predetermined places that is actually deleting the mapped_device in ioctl (process) context, and changes dm_put() just to decrement the reference count of the mapped_device. By this change, dm_put() can be used in any context and the symmetric model below is introduced: dm_create(): create a mapped_device dm_destroy(): destroy a mapped_device dm_get(): increment the reference count of a mapped_device dm_put(): decrement the reference count of a mapped_device dm_destroy() waits for all references of the mapped_device to disappear, then deletes the mapped_device. dm_destroy() uses active waiting with msleep(1), since deleting the mapped_device isn't performance-critical task. And since at this point, nobody opens the mapped_device and no new reference will be taken, the pending counts are just for racing completing activity and will eventually decrease to zero. For the unlikely case of the forced module unload, dm_destroy_immediate(), which doesn't wait and forcibly deletes the mapped_device, is also introduced and used in dm_hash_remove_all(). Otherwise, "rmmod -f" may be stuck and never return. And now, because the mapped_device is deleted at this point, subsequent accesses to the mapped_device may cause NULL pointer references. Cc: stable@kernel.org Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12dm ioctl: release _hash_lock between devices in remove_allKiyoshi Ueda1-19/+25
This patch changes dm_hash_remove_all() to release _hash_lock when removing a device. After removing the device, dm_hash_remove_all() takes _hash_lock and searches the hash from scratch again. This patch is a preparation for the next patch, which changes device deletion code to wait for md reference to be 0. Without this patch, the wait in the next patch may cause AB-BA deadlock: CPU0 CPU1 ----------------------------------------------------------------------- dm_hash_remove_all() down_write(_hash_lock) table_status() md = find_device() dm_get(md) <increment md->holders> dm_get_live_or_inactive_table() dm_get_inactive_table() down_write(_hash_lock) <in the md deletion code> <wait for md->holders to be 0> Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12dm ioctl: return uevent flag after renamePeter Rajnoha1-17/+24
All the dm ioctls that generate uevents set the DM_UEVENT_GENERATED flag so that userspace knows whether or not to wait for a uevent to be processed before continuing, The dm rename ioctl sets this flag but was not structured to return it to userspace. This patch restructures the rename ioctl processing to behave like the other ioctls that return data and so fix this. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12dm ioctl: make __dev_status voidAlasdair G Kergon1-36/+31
__dev_status() cannot fail so make it void and simplify callers. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12dm ioctl: remove __dev_status from geometry and target messagePeter Rajnoha1-6/+0
Remove useless __dev_status call while processing an ioctl that sets up device geometry and target message. The data is not returned to userspace so there is no point collecting it and in the case of target_message it is collected before processing the message so if it did return it might be stale. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-03-06dm ioctl: introduce flag indicating uevent was generatedPeter Rajnoha1-7/+12
Set a new DM_UEVENT_GENERATED_FLAG when returning from ioctls to indicate that a uevent was actually generated. This tells the userspace caller that it may need to wait for the event to be processed. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-03-06dm ioctl: only issue uevent on resume if state changedMike Snitzer1-4/+5
Only issue a uevent on a resume if the state of the device changed, i.e. if it was suspended and/or its table was replaced. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-11dm: rename dm_suspended to dm_suspended_mdKiyoshi Ueda1-4/+4
This patch renames dm_suspended() to dm_suspended_md() and keeps it internal to dm. No functional change. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-11dm: keep old table until after resume succeededAlasdair G Kergon1-4/+6
When swapping a new table into place, retain the old table until its replacement is in place. An old check for an empty table is removed because this is enforced in populate_table(). __unbind() becomes redundant when followed by __bind(). Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-11dm ioctl: retrieve status from inactive tableMike Snitzer1-13/+57
Add the flag DM_QUERY_INACTIVE_TABLE_FLAG to the ioctls to return infomation about the loaded-but-not-yet-active table instead of the live table. Prior to this patch it was impossible to obtain this information until the device had been 'resumed'. Userspace dmsetup and libdevmapper support the flag as of version 1.02.40. e.g. dmsetup info --inactive vg1-lv1 Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-11dm ioctl: forbid messages to devices being deletedMike Anderson1-0/+6
Once we begin deleting a device, prevent any further messages being sent to targets of its table (to avoid races). Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-11dm: rename dm_get_table to dm_get_live_tableAlasdair G Kergon1-7/+7
Rename dm_get_table to dm_get_live_table. Signed-off-by: Alasdair G Kergon <agk@redhat.com>