summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky2-2/+2
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-06Merge branch 'next' of ↵Linus Torvalds1-10/+13
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "Here's the powerpc batch for this merge window. Some of the highlights are: - A bunch of endian fixes ! We don't have full LE support yet in that release but this contains a lot of fixes all over arch/powerpc to use the proper accessors, call the firmware with the right endian mode, etc... - A few updates to our "powernv" platform (non-virtualized, the one to run KVM on), among other, support for bridging the P8 LPC bus for UARTs, support and some EEH fixes. - Some mpc51xx clock API cleanups in preparation for a clock API overhaul - A pile of cleanups of our old math emulation code, including better support for using it to emulate optional FP instructions on embedded chips that otherwise have a HW FPU. - Some infrastructure in selftest, for powerpc now, but could be generalized, initially used by some tests for our perf instruction counting code. - A pile of fixes for hotplug on pseries (that was seriously bitrotting) - The usual slew of freescale embedded updates, new boards, 64-bit hiberation support, e6500 core PMU support, etc..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc: Correct FSCR bit definitions powerpc/xmon: Fix printing of set of CPUs in xmon powerpc/pseries: Move lparcfg.c to platforms/pseries powerpc/powernv: Return secondary CPUs to firmware on kexec powerpc/btext: Fix CONFIG_PPC_EARLY_DEBUG_BOOTX on ppc32 powerpc: Cleanup handling of the DSCR bit in the FSCR register powerpc/pseries: Child nodes are not detached by dlpar_detach_node powerpc/pseries: Add mising of_node_put in delete_dt_node powerpc/pseries: Make dlpar_configure_connector parent node aware powerpc/pseries: Do all node initialization in dlpar_parse_cc_node powerpc/pseries: Fix parsing of initial node path in update_dt_node powerpc/pseries: Pack update_props_workarea to map correctly to rtas buffer header powerpc/pseries: Fix over writing of rtas return code in update_dt_node powerpc/pseries: Fix creation of loop in device node property list powerpc: Skip emulating & leave interrupts off for kernel program checks powerpc: Add more exception trampolines for hypervisor exceptions powerpc: Fix location and rename exception trampolines powerpc: Add more trap names to xmon powerpc/pseries: Add a warning in the case of cross-cpu VPA registration powerpc: Update the 00-Index in Documentation/powerpc ...
2013-09-06Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "The usual trivial updates all over the tree -- mostly typo fixes and documentation updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits) doc: Documentation/cputopology.txt fix typo treewide: Convert retrun typos to return Fix comment typo for init_cma_reserved_pageblock Documentation/trace: Correcting and extending tracepoint documentation mm/hotplug: fix a typo in Documentation/memory-hotplug.txt power: Documentation: Update s2ram link doc: fix a typo in Documentation/00-INDEX Documentation/printk-formats.txt: No casts needed for u64/s64 doc: Fix typo "is is" in Documentations treewide: Fix printks with 0x%# zram: doc fixes Documentation/kmemcheck: update kmemcheck documentation doc: documentation/hwspinlock.txt fix typo PM / Hibernate: add section for resume options doc: filesystems : Fix typo in Documentations/filesystems scsi/megaraid fixed several typos in comments ppc: init_32: Fix error typo "CONFIG_START_KERNEL" treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks page_isolation: Fix a comment typo in test_pages_isolated() doc: fix a typo about irq affinity ...
2013-09-05Merge branch 'v4l_for_linus' of ↵Linus Torvalds154-2069/+15913
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "This series contains: - Exynos s5p-mfc driver got support for VP8 encoder - Some SoC drivers gained support for asynchronous registration (needed for DT) - The RC subsystem gained support for RC activity LED; - New drivers added: a video decoder(adv7842), a video encoder (adv7511), a new GSPCA driver (stk1135) and support for Renesas R-Car (vsp1) - the first SDR kernel driver: mirics msi3101. Due to some troubles with the driver, and because the API is still under discussion, it will be merged at staging for 3.12. Need to rework on it - usual new boards additions, fixes, cleanups and driver improvements" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (242 commits) [media] cx88: Fix regression: CX88_AUDIO_WM8775 can't be 0 [media] exynos4-is: Fix entity unregistration on error path [media] exynos-gsc: Register v4l2 device [media] exynos4-is: Fix fimc-lite bayer formats [media] em28xx: fix assignment of the eeprom data [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe() [media] usbtv: Throw corrupted frames away [media] usbtv: Fix deinterlacing [media] v4l2: added missing mutex.h include to v4l2-ctrls.h [media] DocBook: upgrade media_api DocBook version to 4.2 [media] ml86v7667: fix compile warning: 'ret' set but not used [media] s5p-g2d: Fix registration failure [media] media: coda: Fix DT driver data pointer for i.MX27 [media] s5p-mfc: Fix input/output format reporting [media] v4l: vsp1: Fix mutex double lock at streamon time [media] v4l: vsp1: Add support for RT clock [media] v4l: vsp1: Initialize media device bus_info field [media] davinci: vpif_capture: fix error return code in vpif_probe() [media] davinci: vpif_display: fix error return code in vpif_probe() [media] MAINTAINERS: add entries for adv7511 and adv7842 ...
2013-09-05Merge branch 'i2c/for-next' of ↵Linus Torvalds3-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Highlights: - OF and ACPI helpers are now included in the core, and not in external files anymore. This removes dependency problems for modules and is cleaner, in general. - mv64xxx-driver gains fifo usage to support mv78230 - imx-driver overhaul to support VF610 - various cleanups, most notably related to devm_* and CONFIG_PM usage - driver bugfixes and smaller feature additions" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits) i2c: rcar: add rcar-H2 support i2c: sirf: retry 3 times as sometimes we get random noack and timeout i2c: sirf: support reverse direction of address i2c: sirf: fix the typo for setting bitrate to less than 100k i2c: sirf: we need to wait I2C_RESET status in resume i2c: sirf: reset i2c controller early after we get a noack i2c: designware: get SDA hold time, HCNT and LCNT configuration from ACPI i2c: designware: make HCNT/LCNT values configurable i2c: mpc: cleanup clock API use i2c: pnx: fix error return code in i2c_pnx_probe() i2c: ismt: add error return code in probe() i2c: mv64xxx: fix typo in binding documentation i2c: imx: use exact SoC revision to document binding i2c: move ACPI helpers into the core i2c: move OF helpers into the core i2c: mv64xxx: Fix timing issue on Armada XP (errata FE-8471889) i2c: mv64xxx: Add I2C Transaction Generator support i2c: powermac: fix return path on error Documentation: i2c: Fix example in instantiating-devices i2c: tiny-usb: do not use stack as URB transfer_buffer ...
2013-09-05Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-09-03Merge tag 'driver-core-3.12-rc1' of ↵Linus Torvalds1-13/+17
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ...
2013-09-03[media] cx88: Fix regression: CX88_AUDIO_WM8775 can't be 0Hans Verkuil1-1/+1
Cards using the wm8775 specify that in their card struct. Those that do not use it leave the audio_chip field to 0. Unfortunately, the CX88_AUDIO_WM8775 enum is 0 as well, so boards that do not have the wm8775 still try to load and use that driver. Change it to 1 to fix this. This regression was introduced in commit facd23664f1d63c33fbc6da52261c8548ed3fbd4. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Knut Petersen <Knut_Petersen@t-online.de> Tested-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org
2013-09-03[media] exynos4-is: Fix entity unregistration on error pathSylwester Nawrocki1-1/+1
This patch corrects media entities unregistration order to make sure the fimc.N.capture and fimc-lite video nodes are unregistered with fimc->lock mutex held. This prevents races between video device open() and defered probing and NULL pointer dereference in open() callback as follows: [ 77.645000] Unable to handle kernel NULL pointer dereference at virtual address 00000290t [ 77.655000] pgd = ee7a8000 [ 77.660000] [00000290] *pgd=6e13c831, *pte=00000000, *ppte=00000000 [ 77.665000] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 77.670000] Modules linked in: s5p_fimc ipv6 exynos_fimc_is exynos_fimc_lite s5p_csis v4l2_mem2mem videobuf2_dma_contig videobuf2_memops exynos4_is_common videobuf2_core [last unloaded: s5p_fimc] [ 77.685000] CPU: 0 PID : 2998 Comm: v4l_id Tainted: G W 3.10.0-next-20130709-00039-g39f491b-dirty #1548 [ 77.695000] task: ee084000 ti: ee46e000 task.ti: ee46e000 [ 77.700000] PC is at __mutex_lock_slowpath+0x54/0x368 [ 77.705000] LR is at __mutex_lock_slowpath+0x24/0x368 [ 77.710000] pc : [<c038dc10>] lr : [<c038dbe0>] psr: 60000093 [ 77.710000] sp : ee46fd70 ip : 000008c8 fp : c054e34c [ 77.725000] r10: ee084000 r9 : 00000000 r8 : ee439480 [ 77.730000] r7 : ee46e000 r6 : 60000013 r5 : 00000290 r4 : 0000028c [ 77.735000] r3 : 00000000 r2 : 00000000 r1 : 20000093 r0 : 00000001 [ 77.740000] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 77.750000] Control: 10c5387d Table: 6e7a804a DAC: 00000015 [ 77.755000] Process v4l_id (pid: 2998, stack limit = 0xee46e238) [ 77.760000] Stack: (0xee46fd70 to 0xee470000) ... [ 77.935000] [<c038dc10>] (__mutex_lock_slowpath+0x54/0x368) from [<c038df30>] (mutex_lock+0xc/0x24) [ 77.945000] [<c038df30>] (mutex_lock+0xc/0x24) from [<bf03fa90>] (fimc_lite_open+0x12c/0x2bc [exynos_fimc_lite]) [ 77.955000] [<bf03fa90>] (fimc_lite_open+0x12c/0x2bc [exynos_fimc_lite]) from [<c02ab11c>] (v4l2_open+0xa0/0xe0) [ 77.965000] [<c02ab11c>] (v4l2_open+0xa0/0xe0) from [<c00b1de4>] (chrdev_open+0x88/0x170) [ 77.975000] [<c00b1de4>] (chrdev_open+0x88/0x170) from [<c00ac710>] (do_dentry_open.isra.14+0x1d8/0x258) [ 77.985000] [<c00ac710>] (do_dentry_open.isra.14+0x1d8/0x258) from [<c00ac860>] (finish_open+0x20/0x38) [ 77.995000] [<c00ac860>] (finish_open+0x20/0x38) from [<c00ba658>] (do_last.isra.43+0x538/0xb1c) [ 78.000000] [<c00ba658>] (do_last.isra.43+0x538/0xb1c) from [<c00bacf0>] (path_openat+0xb4/0x5c4) [ 78.010000] [<c00bacf0>] (path_openat+0xb4/0x5c4) from [<c00bb4b4>] (do_filp_open+0x2c/0x80) [ 78.020000] [<c00bb4b4>] (do_filp_open+0x2c/0x80) from [<c00ad744>] (do_sys_open+0xf4/0x1a8) [ 78.025000] [<c00ad744>] (do_sys_open+0xf4/0x1a8) from [<c000e320>] (ret_fast_syscall+0x0/0x30) [ 78.035000] Code: 1a000093 e10f6000 f10c0080 e2845004 (e1953f9f) Reported-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org
2013-09-03[media] exynos-gsc: Register v4l2 deviceArun Kumar K3-1/+10
Gscaler video device registration was happening without reference to a parent v4l2_dev causing probe to fail. The patch creates a parent v4l2 device and uses it for the gsc m2m video device registration. This fixes regression introduced with comit commit 1c1d86a1ea07506 [media] v4l2: always require v4l2_dev, rename parent to dev_parent Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org
2013-09-03[media] exynos4-is: Fix fimc-lite bayer formatsArun Kumar K1-2/+2
The 10-bit and 12-bit Bayer output formats supported by FIMC-LITE actually use 16 bits where the extra bits are padded with zeros. The patch corrects buffer allocation for these two formats by modifying the depth field. This prevents memory corruption by the output DMA due to insufficient buffer size. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org
2013-09-03[media] em28xx: fix assignment of the eeprom dataAlban Browaeys1-1/+1
Set the config structure pointer to the eeprom data pointer (data, here eedata dereferenced) not the pointer to the pointer to the eeprom data (eedata itself). Signed-off-by: Alban Browaeys <prahal@yahoo.com> Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: stable@vger.kernel.org # for v3.10 Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org
2013-09-03[media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe()Alexey Khoroshilov1-5/+6
free_buff_list and rec_buff_list are initialized in the middle of hdpvr_probe(), but if something bad happens before that, error handling code calls hdpvr_delete(), which contains iteration over the lists (via hdpvr_free_buffers()). The patch moves the lists initialization to the beginning and by the way fixes goto label in error handling of registering videodev. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org
2013-09-03[media] usbtv: Throw corrupted frames awayLubomir Rintel1-2/+13
Ignore out of order data and mark incomplete buffers as errored. This gets rid of annoying flicker due to occassional garbage from hardware. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: linux-media@vger.kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org
2013-09-03[media] usbtv: Fix deinterlacingLubomir Rintel1-11/+25
The image data is laid out a bit more weirdly and thus needs more work to properly interlace. What we get from hardware is V4L2_FIELD_ALTERNATE, but since userspace support for it is practically nonexistent, thus we make V4L2_FIELD_INTERLACED from it so that it's more easily interpreted. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org
2013-09-03[media] ml86v7667: fix compile warning: 'ret' set but not usedHans Verkuil1-2/+2
media_build/v4l/ml86v7667.c: In function 'ml86v7667_s_ctrl': media_build/v4l/ml86v7667.c:120:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^ And indeed, ret is set but not used. Let's actually return the error code. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-09-03[media] s5p-g2d: Fix registration failureSachin Kamat1-0/+1
Commit 1c1d86a1ea ("[media] v4l2: always require v4l2_dev, rename parent to dev_parent") expects v4l2_dev to be always set. It converted most of the drivers using the parent field of video_device to v4l2_dev field. G2D driver did not set the parent field. Hence it got left out. Without this patch we get the following boot warning and G2D driver fails to register the video device. WARNING: CPU: 0 PID: 1 at drivers/media/v4l2-core/v4l2-dev.c:775 __video_register_device+0xfc0/0x1028() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.11.0-rc1-00001-g1c3e372-dirty #9 [<c0014b7c>] (unwind_backtrace+0x0/0xf4) from [<c0011524>] (show_stack+0x10/0x14) [<c0011524>] (show_stack+0x10/0x14) from [<c041d7a8>] (dump_stack+0x7c/0xb0) [<c041d7a8>] (dump_stack+0x7c/0xb0) from [<c001dc94>] (warn_slowpath_common+0x6c/0x88) [<c001dc94>] (warn_slowpath_common+0x6c/0x88) from [<c001dd4c>] (warn_slowpath_null+0x1c/0x24) [<c001dd4c>] (warn_slowpath_null+0x1c/0x24) from [<c02cf8d4>] (__video_register_device+0xfc0/0x1028) [<c02cf8d4>] (__video_register_device+0xfc0/0x1028) from [<c0311a94>] (g2d_probe+0x1f8/0x398) [<c0311a94>] (g2d_probe+0x1f8/0x398) from [<c0247d54>] (platform_drv_probe+0x14/0x18) [<c0247d54>] (platform_drv_probe+0x14/0x18) from [<c0246b10>] (driver_probe_device+0x108/0x220) [<c0246b10>] (driver_probe_device+0x108/0x220) from [<c0246cf8>] (__driver_attach+0x8c/0x90) [<c0246cf8>] (__driver_attach+0x8c/0x90) from [<c0245050>] (bus_for_each_dev+0x60/0x94) [<c0245050>] (bus_for_each_dev+0x60/0x94) from [<c02462c8>] (bus_add_driver+0x1c0/0x24c) [<c02462c8>] (bus_add_driver+0x1c0/0x24c) from [<c02472d0>] (driver_register+0x78/0x140) [<c02472d0>] (driver_register+0x78/0x140) from [<c00087c8>] (do_one_initcall+0xf8/0x144) [<c00087c8>] (do_one_initcall+0xf8/0x144) from [<c05b29e8>] (kernel_init_freeable+0x13c/0x1d8) [<c05b29e8>] (kernel_init_freeable+0x13c/0x1d8) from [<c041a108>] (kernel_init+0xc/0x160) [<c041a108>] (kernel_init+0xc/0x160) from [<c000e2f8>] (ret_from_fork+0x14/0x3c) ---[ end trace 4e0ec028b0028e02 ]--- s5p-g2d 12800000.g2d: Failed to register video device s5p-g2d: probe of 12800000.g2d failed with error -22 Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org
2013-09-03[media] media: coda: Fix DT driver data pointer for i.MX27Alexander Shiyan1-1/+1
The data pointer should point to DT data, and not to the ID array. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org
2013-09-03[media] s5p-mfc: Fix input/output format reportingJohn Sheu2-80/+55
The video encode/decode paths have duplicated logic between VIDIOC_TRY_FMT and VIDIOC_S_FMT that should be de-duped. Also, video decode reports V4L2_PIX_FMT_NV12MT_16X16 output format, regardless of what the actual output has been set at. Fix this. Signed-off-by: John Sheu <sheu@google.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org
2013-08-28[media] v4l: vsp1: Fix mutex double lock at streamon timeLaurent Pinchart1-2/+0
A mutex_lock() was left when the driver was converted to use the vb2 ioctl helpers, resulting in a deadlock at streamon time. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-28[media] v4l: vsp1: Add support for RT clockLaurent Pinchart2-5/+36
The VSPR and VSPS instances use two clocks, the VSP1 system clock and the VSP1 realtime clock. Both of them need to be enabled to access the VSP1 registers. Add support for an optional RT clock and enable/disable it along with the system clock. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-28[media] v4l: vsp1: Initialize media device bus_info fieldLaurent Pinchart1-0/+2
Fill bus_info with the VSP1 platform device name Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-26[media] davinci: vpif_capture: fix error return code in vpif_probe()Wei Yongjun1-0/+1
Fix to return -ENODEV in the subdevice register error handling case instead of 0, as done elsewhere in this function. Introduced by commit 873229e4fdf34196aa5d707957c59ba54c25eaba ([media] media: davinci: vpif: capture: add V4L2-async support) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-26[media] davinci: vpif_display: fix error return code in vpif_probe()Wei Yongjun1-0/+1
Fix to return -ENODEV in the subdevice register error handling case instead of 0, as done elsewhere in this function. Introduce by commit 4b8a531e6bb0686203e9cf82a54dfe189de7d5c2. ([media] media: davinci: vpif: display: add V4L2-async support) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-26[media] adv7511: add new video encoderHans Verkuil3-0/+1210
This is an Analog Devices HDMI transmitter. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-26[media] adv7842: add new video decoder driverHans Verkuil3-0/+2959
This is a Analog Devices Component/Graphics/SD Digitizer with 2:1 Multiplexed HDMI Receiver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] vsp1: Fix a sparse warningMauro Carvalho Chehab1-2/+2
As reported by: kbuild test robot <fengguang.wu@intel.com>: drivers/media/platform/vsp1/vsp1_drv.c:434:21: sparse: cast removes address space of expression 433 vsp1->mmio = devm_ioremap_resource(&pdev->dev, io); > 434 if (IS_ERR((void *)vsp1->mmio)) > 435 return PTR_ERR((void *)vsp1->mmio); There's no need to convert it to void *. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] cx88: fix build when VP3054=m and CX88_DVB=yMauro Carvalho Chehab1-3/+8
As reported by Jim Davis <jim.epost@gmail.com>: randconfig build error with next-20130813, in drivers/media/pci/cx88, when: CONFIG_VIDEO_CX88=y CONFIG_VIDEO_CX88_BLACKBIRD=m CONFIG_VIDEO_CX88_DVB=y CONFIG_VIDEO_CX88_VP3054=m CONFIG_VIDEO_CX88_MPEG=y LD init/built-in.o drivers/built-in.o: In function `cx8802_dvb_remove': cx88-dvb.c:(.text+0x3a9914): undefined reference to `vp3054_i2c_remove' drivers/built-in.o: In function `cx8802_dvb_probe': cx88-dvb.c:(.text+0x3a9c4b): undefined reference to `vp3054_i2c_probe' make: *** [vmlinux] Error 1 That happens because the vp3054 symbols aren't available builtin. So, make it builtin, if CX88_DVB=y, or module otherwise, if this support is selected. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] sms: fix randconfig building errorMauro Carvalho Chehab1-0/+2
As reported by Jim Davis <jim.epost@gmail.com>, building with: CONFIG_USB=m CONFIG_SMS_USB_DRV=m CONFIG_SMS_SDIO_DRV=y CONFIG_SMS_SIANO_MDTV=y CONFIG_SMS_SIANO_DEBUGFS=y causes a build error: drivers/built-in.o: In function `smsdvb_debugfs_register': /home/jim/linux/drivers/media/common/siano/smsdvb-debugfs.c:537: undefined reference to `usb_debug_root' make: *** [vmlinux] Error 1 That happens because the siano-mdtv is builtin, while USB is a module. As it makes not much sense to have sms-usb compiled as 'm' and sms-sdio compiled as 'y' (or vice-versa), only allow enabling debugfs if both are either 'y' or 'm'. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] Fix build errors on usbtv when driver is builtinMauro Carvalho Chehab1-1/+1
As reported by Fengguang Wu <fengguang.wu@intel.com> drivers/built-in.o: In function `vb2_ioctl_streamon': >> (.text+0x8d354): undefined reference to `video_devdata' drivers/built-in.o: In function `vb2_ioctl_streamoff': >> (.text+0x8d397): undefined reference to `video_devdata' drivers/built-in.o: In function `vb2_ioctl_expbuf': ... That happens when: CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2=m CONFIG_VIDEO_USBTV=y As the core is module, usbtv should also be compiled as module. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] Fixed misleading error when handling IR interruptsLuis Alves1-4/+1
Hi, Handling the AV Core/IR interrupts schedules its workqueue but the schedule_work function returns false if @work was already on the kernel-global workqueue and true otherwise. Printing an error message if @work wasn't in the queue is wrong. Regards, Luis Signed-off-by: Luis Alves <ljalvs@gmail.com> Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] ov9650: off by one in ov965x_enum_frame_sizes()Dan Carpenter1-1/+1
The ">" should be ">=" otherwise we read one space beyond the end of the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] s5k6aa: off by one in s5k6aa_enum_frame_interval()Dan Carpenter1-1/+1
The check is off by one so we could read one space past the end of the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] s3c-camif: forever loop in camif_hw_set_source_format()Dan Carpenter1-4/+4
Because "i" is unsigned then "i-- >= 0" is always true. If we don't find what we are looking for then we loop forever. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] s5p-tv: Include missing v4l2-dv-timings.h header fileSylwester Nawrocki1-0/+1
Include the v4l2-dv-timings.h header file which in the s5p-tv driver which was supposed to be updated in commit 2576415846bcbad3c0a6885fc44f95083710 "[media] v4l2: move dv-timings related code to v4l2-dv-timings.c" This fixes following build error: drivers/media/platform/s5p-tv/hdmi_drv.c: In function ‘hdmi_s_dv_timings’: drivers/media/platform/s5p-tv/hdmi_drv.c:628:3: error: implicit declaration of function ‘v4l_match_dv_timings’ Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] exynos4-is: Ensure the FIMC gate clock is disabled at driver remove()Andrzej Hajda1-0/+2
The patch fixes following warning: [ 9664.460000] WARNING: CPU: 0 PID: 2880 at drivers/clk/clk.c:695 __clk_unprepare+0x8c/0xa4() [ 9664.470000] Modules linked in: m5mols s5k5baf s5p_fimc(-) ipv6 s5p_csis v4l2_mem2mem videobuf2_dma_contig videobuf2_memops exynos4_is_common videobuf2_core [last unloaded: m5mols] [ 9664.485000] CPU: 0 PID: 2880 Comm: rmmod Tainted: G W 3.11.0-rc1-00070-ga94e22f-dirty #1558 [ 9664.495000] [<c0014aec>] (unwind_backtrace+0x0/0xf8) from [<c0011574>] (show_stack+0x10/0x14) [ 9664.505000] [<c0011574>] (show_stack+0x10/0x14) from [<c038b248>] (dump_stack+0x6c/0xac) [ 9664.510000] [<c038b248>] (dump_stack+0x6c/0xac) from [<c001d824>] (warn_slowpath_common+0x64/0x88) [ 9664.520000] [<c001d824>] (warn_slowpath_common+0x64/0x88) from [<c001d864>] (warn_slowpath_null+0x1c/0x24) [ 9664.530000] [<c001d864>] (warn_slowpath_null+0x1c/0x24) from [<c02f0b9c>] (__clk_unprepare+0x8c/0xa4) [ 9664.540000] [<c02f0b9c>] (__clk_unprepare+0x8c/0xa4) from [<c02f0bc8>] (clk_unprepare+0x14/0x1c) [ 9664.550000] [<c02f0bc8>] (clk_unprepare+0x14/0x1c) from [<bf191344>] (fimc_clk_put+0x3c/0x5c [s5p_fimc]) [ 9664.560000] [<bf191344>] (fimc_clk_put+0x3c/0x5c [s5p_fimc]) from [<bf1913c0>] (fimc_remove+0x5c/0x90 [s5p_fimc]) [ 9664.570000] [<bf1913c0>] (fimc_remove+0x5c/0x90 [s5p_fimc]) from [<c0219ca0>] (platform_drv_remove+0x18/0x1c) [ 9664.580000] [<c0219ca0>] (platform_drv_remove+0x18/0x1c) from [<c021856c>] (__device_release_driver+0x70/0xcc) [ 9664.590000] [<c021856c>] (__device_release_driver+0x70/0xcc) from [<c0218d54>] (driver_detach+0xac/0xb0) [ 9664.595000] [<c0218d54>] (driver_detach+0xac/0xb0) from [<c021839c>] (bus_remove_driver+0x7c/0xc0) [ 9664.605000] [<c021839c>] (bus_remove_driver+0x7c/0xc0) from [<c00659d8>] (SyS_delete_module+0x11c/0x204) [ 9664.615000] [<c00659d8>] (SyS_delete_module+0x11c/0x204) from [<c000e360>] (ret_fast_syscall+0x0/0x30) [ 9664.625000] ---[ end trace 662c092cce432c8d ]--- Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] exynos4-is: Print error message on timeoutDan Carpenter1-1/+1
There is a stray '!' character so the error message never gets printed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] exynos4-is: Annotate unused functionsSachin Kamat2-2/+2
__is_set_init_isp_aa and fimc_is_hw_set_tune currently do not have any callers. However these functions may be used in the future. Hence instead of deleting them, staticize and annotate them with __maybe_unused flag to avoid compiler warnings. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] exynos4-is: Simplify sclk_cam clocks handlingSylwester Nawrocki1-10/+3
Use clk_prepare_enable()/clk_disable_unprepare() instead of separately prearing/unparing the clk_cam clocks. This simplifies the code that is now mostly not going to be used, function __fimc_md_set_camclk() is only left for S5PV210 platform which is not yet converted to Device Tree. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] exynos4-is: Add missing v4l2_device_unregister() call in ↵Sylwester Nawrocki1-0/+2
fimc_md_remove() Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] exynos4-is: Add missing MODULE_LICENSE for exynos-fimc-is.koSylwester Nawrocki1-0/+1
This fixes compilation warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/exynos4-is/exynos-fimc-is.o Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] exynos4-is: Initialize the ISP subdev sd->owner fieldSylwester Nawrocki1-0/+2
Set the subdevs owner module so the exynos4_fimc_is module cannot be unloaded when the FIMC-IS driver is in use. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] exynos4-is: Handle suspend/resume of fimc-is-i2c correctlyTomasz Figa1-4/+29
If the same callbacks are used for runtime and system suspend/resume, clocks can get disabled twice, which can lead to negative reference counts and kernel warnings. This patch splits suspend/resume callbacks into separate runtime and system-wide functions, so clock gating is done correctly. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] gspca_ov519: Fix support for the Terratec Terracam USB ProHans de Goede1-7/+25
This is a camera with an ov518+ revision 0 bridge + ov7620ae sensor, which appearently needs different handling then the Trust spacecam 320, which has an ov518+ revision 2 + ov7620ae sensor. The Terracam USB Pro used to write this patch has kindly been provided by Dr. Tilmann Bubeck <t.bubeck@reinform.de>. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] ad9389b: set is_private only after successfully creating all controlsHans Verkuil1-5/+5
is_private was set right after creating each control, but the control pointer might be NULL in case of an error. Set it after all controls were successfully created, since that guarantees that all control pointers are non-NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] adv7604: set is_private only after successfully creating all controlsHans Verkuil1-5/+6
is_private was set right after creating each control, but the control pointer might be NULL in case of an error. Set it after all controls were successfully created, since that guarantees that all control pointers are non-NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] v4l2-dv-timings: add callback to handle exceptionsHans Verkuil3-14/+27
In most cases the v4l2_bt_timings_cap struct has all the information necessary to determine valid timings, but occasionally there are exceptions. Add a callback function to be able to test for those exceptions. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] v4l2-dv-timings: rename v4l2_dv_valid_timings to v4l2_valid_dv_timingsHans Verkuil3-7/+7
All other functions follow the v4l2_<foo>_dv_timings pattern, do the same for this function. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] v4l2-dv-timings: export the timings listHans Verkuil1-8/+10
Some drivers need to be able to access the full list of timings. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] v4l2-dv-timings: fill in type fieldHans Verkuil1-0/+2
The detect_cvt/gtf functions didn't fill in the type field. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>