summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2020-03-30mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clockJarkko Nikula1-8/+13
Intel Elkhart Lake LPSS I2C has 100 MHz input clock instead of 133 MHz that was our preliminary information. This will result slower I2C bus clock when driver calculates its timing parameters in case ACPI tables don't provide them. Slower I2C bus clock is allowed but let's fix this to match with reality. While at it, keep the same default I2C device properties as Intel Broxton since it is not known do they need any update. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: aat2870: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-1/+1
There is still one call of sprintf() without checking the proper buffer overflow in aat2870_dump_reg(). Replace it with scnprintf() call for covering that. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: dln2: Allow to be enumerated via ACPIAndy Shevchenko1-0/+21
On some platforms user may want to enumerate DLN2 device, its children, to be enumerated via ACPI. In order to achieve this, let's distinguish children by _ADR value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: da9062: Add support for interrupt polarity defined in device treeShreyas Joshi1-3/+41
The da9062 interrupt handler cannot necessarily be low active. Add a function to configure the interrupt type based on what is defined in the device tree. The allowable interrupt type is either low or high level trigger. Signed-off-by: Shreyas Joshi <shreyas.joshi@biamp.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: dln2: Fix sanity checking for endpointsAndy Shevchenko1-2/+7
While the commit 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints") tries to harden the sanity checks it made at the same time a regression, i.e. mixed in and out endpoints. Obviously it should have been not tested on real hardware at that time, but unluckily it didn't happen. So, fix above mentioned typo and make device being enumerated again. While here, introduce an enumerator for magic values to prevent similar issue to happen in the future. Fixes: 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints") Cc: Oliver Neukum <oneukum@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDsAndy Shevchenko1-0/+10
Intel Comet Lake PCH-V has the same LPSS than Intel Kaby Lake. Add the new IDs to the list of supported devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: sc27xx: Add USB charger type detection supportBaolin Wang1-0/+52
The Spreadtrum SC27XX series PMICs supply the USB charger type detection function, and related registers are located on the PMIC global registers region, thus we implement and export this function in the MFD driver for users to get the USB charger type. Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Convert RK805 to shutdown/suspend hooksRobin Murphy1-25/+12
RK805 has the same kind of dual-role sleep/shutdown pin as RK809/RK817, so it makes little sense for the driver to have to have two completely different mechanisms to handle essentially the same thing. Move RK805 over to the shutdown/suspend flow to clean things up. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Reduce shutdown duplicationRobin Murphy1-41/+20
Rather than having 3 almost-identical functions plus the machinery to keep track of them, it's far simpler to just dynamically select the appropriate register field per variant. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Stop using syscore opsRobin Murphy1-14/+12
Setting the SLEEP pin to its shutdown function for appropriate PMICs doesn't need to happen in single-CPU context, so there's really no point involving the syscore machinery. Hook it up to the standard driver model shutdown method instead. This also obviates the issue that the syscore ops weren't being unregistered on probe failure or module removal. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Ensure suspend/resume hooks always workRobin Murphy1-2/+2
The RK809/RK817 suspend/resume hooks should not have to depend on whether this driver owns the pm_power_off hook, and thus the global rk808_i2c_client is set - indeed, the GPIO-based control is really only relevant when PSCI firmware is in charge of power rather than the kernel. As driver model callbacks, they have an appropriate device argument to hand, so can just always use that. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Always use poweroff when requestedSoeren Moch1-9/+2
With the device tree property "rockchip,system-power-controller" we explicitly request to use this PMIC to power off the system. So always register our poweroff function, even if some other handler (probably PSCI poweroff) was registered before. This does tend to reveal a warning on shutdown due to the Rockchip I2C driver not implementing an atomic transfer method, however since the write to DEV_OFF takes effect immediately the I2C completion interrupt is moot anyway, and as the very last thing written to the console it is only visible to users going out of their way to capture serial output. Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> [ rm: note potential warning in commit message ] Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: omap: Remove useless cast for driver.nameCorentin Labbe2-2/+2
device_driver name is const char pointer, so it not useful to cast xx_driver_name (which is already const char). Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: Kconfig: Fix some misspelling of the word functionalityChristophe JAILLET1-4/+4
Fix several variations of typo around functionali{ty,es}. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: pm8xxx: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: omap-usb-tll: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: cpcap: Fix compile if MFD_CORE is not selectedTony Lindgren1-0/+1
If only cpcap mfd driver is selected we will get: ERROR: "devm_mfd_add_devices" [drivers/mfd/motorola-cpcap.ko] undefined! This is because Kconfig is missing select for MFD_CORE. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: cros_ec: Check DT node for usbpd-notify addPrashant Malani1-1/+1
Add a check to ensure there is indeed an EC device tree entry before adding the cros-usbpd-notify device. This covers configs where both CONFIG_ACPI and CONFIG_OF are defined, but the EC device is defined using device tree and not in ACPI. Fixes: 4602dce0361e ("mfd: cros_ec: Add cros-usbpd-notify subdevice") Signed-off-by: Prashant Malani <pmalani@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30Merge branches 'ib-mfd-iio-input-5.7' and 'ib-mfd-iio-rtc-5.7' into ↵Lee Jones2-11/+99
ibs-for-mfd-merged
2020-03-27mfd: rn5t618: Cleanup i2c_device_idAndreas Kemnade1-9/+2
That list was just empty, so it can be removed if .probe_new instead of .probe is used Suggested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-27mfd: rn5t618: Add more subdevicesAndreas Kemnade1-2/+18
Since the RC5T619 has a RTC, use a separate subdevice list for that. The ADC should be the same as in the RN5T618, according to drivers in the wild, but since it is not tested, the ADC is only added for the RC5T619. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-27mfd: rn5t618: Add RTC related registersAndreas Kemnade1-0/+2
Defines for some RTC related registers were missing, also they were not included in the volatile register list Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-27mfd: rn5t618: Add IRQ supportAndreas Kemnade2-1/+78
This adds support for IRQ handling in the RC5T619 which is required for properly implementing subdevices like RTC. For now only definitions for the variant RC5T619 are included. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-27mfd: Add support for Azoteq IQS620A/621/622/624/625Jeff LaBundy3-0/+1077
This patch adds core support for the Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-02-04Merge tag 'tag-chrome-platform-for-v5.6' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "CrOS EC: - Refactoring of some of cros_ec's headers: include/linux/mfd/cros_ec.h now removed, new cros_ec.h added to drivers/platform/chrome which contains shared operations of cros_ec transport drivers. - Response tracing in cros_ec_proto Wilco EC: - Fix unregistration order. - Fix keyboard backlight probing on systems without keyboard backlight - Minor cleanup (newlines in printks, COMPILE_TEST) Misc: - chromeos_laptop converted to use i2c_new_scanned_device instead of i2c_new_probed_device" * tag 'tag-chrome-platform-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec: Match implementation with headers platform/chrome: cros_ec: Drop unaligned.h include platform/chrome: wilco_ec: Allow wilco to be compiled in COMPILE_TEST platform/chrome: wilco_ec: Add newlines to printks platform/chrome: wilco_ec: Fix unregistration order cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h' platform/chrome: cros_ec_ishtp: Make init_lock static platform/chrome: chromeos_laptop: Convert to i2c_new_scanned_device platform/chrome: cros_ec_lpc: Use platform_get_irq_optional() for optional IRQs platform/chrome: cros_ec_proto: Add response tracing platform/chrome: cros_ec_trace: Match trace commands with EC commands
2020-02-03Merge tag 'mfd-next-5.6' of ↵Linus Torvalds20-150/+892
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for ROHM BD71828 PMICs and GPIOs - Add support for Qualcomm Aqstic Audio Codecs WCD9340 and WCD9341 New Device Support: - Add support for BD71828 to BD70528 RTC driver - Add support for Intel's Jasper Lake to LPSS PCI New Functionality: - Add support for Power Key to ROHM BD71828 - Add support for Clocks to ROHM BD71828 - Add support for GPIOs to Dialog DA9062 - Add support for USB PD Notify to ChromiumOS EC - Allow callers to specify args when requesting regmap lookup; syscon Fix-ups: - Improve error handling and sanity checking; atmel-hlcdc, dln2 - Device Tree support/documentation; bd71828, da9062, xylon,logicvc, ab8500, max14577, atmel-usart - Match devices using platform IDs; bd7xxxx - Refactor BD718x7 regulator component; bd718x7-regulator - Use standard interfaces/helpers; syscon, sm501 - Trivial (whitespace, spelling, etc); ab8500-core, Kconfig - Remove unused code; db8500-prcmu, tqmx86 - Wait until boot has finished before accessing registers; madera-core - Provide missing register value defaults; cs47l15-tables - Allow more time for hardware to reset; madera-core Bug Fixes: - Fix erroneous register values; rohm-bd70528 - Fix register volatility; axp20x, rn5t618 - Fix Kconfig dependencies; MFD_MAX77650 - Fix incorrect compatible string; da9062-core - Fix syscon_regmap_lookup_by_phandle_args() stub; syscon" * tag 'mfd-next-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits) mfd: syscon: Fix syscon_regmap_lookup_by_phandle_args() dummy mfd: wcd934x: Add support to wcd9340/wcd9341 codec mfd: syscon: Add arguments support for syscon reference mfd: rn5t618: Mark ADC control register volatile dt-bindings: atmel-usart: Add microchip,sam9x60-{usart, dbgu} dt-bindings: atmel-usart: Remove wildcard mfd: cros_ec: Add cros-usbpd-notify subdevice mfd: da9062: Fix watchdog compatible string mfd: madera: Allow more time for hardware reset mfd: cs47l15: Add missing register default mfd: madera: Wait for boot done before accessing any other registers mfd: Kconfig: Rename Samsung to lowercase mfd: tqmx86: remove set but not used variable 'i2c_ien' mfd: dbx500-prcmu: Drop DSI pll clock functions mfd: dbx500-prcmu: Drop set_display_clocks() mfd: max77650: Select REGMAP_IRQ in Kconfig mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile mfd: ab8500: Fix ab8500-clk typo mfd: intel-lpss: Add Intel Jasper Lake PCI IDs dt-bindings: mfd: max14577: Add reference to max14040_battery.txt descriptions ...
2020-01-31Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds3-0/+683
Pull MIPS changes from Paul Burton: "Nothing too big or scary in here: - Support mremap() for the VDSO, primarily to allow CRIU to restore the VDSO to its checkpointed location. - Restore the MIPS32 cBPF JIT, after having reverted the enablement of the eBPF JIT for MIPS32 systems in the 5.5 cycle. - Improve cop0 counter synchronization behaviour whilst onlining CPUs by running with interrupts disabled. - Better match FPU behaviour when emulating multiply-accumulate instructions on pre-r6 systems that implement IEEE754-2008 style MACs. - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them to take advantage of instructions introduced by r2. - Support for the Ingenic X1000 SoC & the really nice little CU Neo development board that's using it. - Support for WMAC on GARDENA Smart Gateway devices. - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in preparation for introducing IP35 (Origin 3*) support. - Various Kconfig & Makefile cleanups" * tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits) MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel MIPS: Loongson64: Disable exec hazard MIPS: Loongson64: Bump ISA level to MIPSR2 MIPS: Make DIEI support as a config option MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too" MIPS: asm: local: add barriers for Loongson MIPS: Loongson64: Select mac2008 only feature MIPS: Add MAC2008 Support Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel" MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again) MIPS: make CPU_HAS_LOAD_STORE_LR opt-out MIPS: generic: don't unconditionally select PINCTRL MIPS: don't explicitly select LIBFDT in Kconfig MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts MIPS: SGI-IP30: Check for valid pointer before using it MIPS: syscalls: fix indentation of the 'SYSNR' message MIPS: boot: fix typo in 'vmlinux.lzma.its' target MIPS: fix indentation of the 'RELOCS' message dt-bindings: Document loongson vendor-prefix MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi. ...
2020-01-29mfd: wcd934x: Add support to wcd9340/wcd9341 codecSrinivas Kandagatla3-0/+319
Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC. This codec has integrated SoundWire controller, pin controller and interrupt controller. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: syscon: Add arguments support for syscon referenceOrson Zhai1-0/+29
There are a lot of similar global registers being used across multiple SoCs from Unisoc. But most of these registers are assigned with different offset for different SoCs. It is hard to handle all of them in an all-in-one kernel image. Add a helper function to get regmap with arguments where we could put some extra information such as the offset value. Signed-off-by: Orson Zhai <orson.zhai@unisoc.com> Tested-by: Baolin Wang <baolin.wang@unisoc.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: rn5t618: Mark ADC control register volatileAndreas Kemnade1-0/+1
There is a bit which gets cleared after conversion. Fixes: 9bb9e29c78f8 ("mfd: Add Ricoh RN5T618 PMIC core driver") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: cros_ec: Add cros-usbpd-notify subdevicePrashant Malani1-0/+22
Add the cros-usbpd-notify driver as a subdevice on platforms that support the EC_FEATURE_USB_PD EC feature flag and don't have the ACPI PD notification device defined. This driver allows other cros-ec devices to receive PD event notifications from the Chrome OS Embedded Controller (EC) via a notification chain. Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: da9062: Fix watchdog compatible stringMarco Felsch1-1/+1
The watchdog driver compatible is "dlg,da9062-watchdog" and not "dlg,da9062-wdt". Therefore the mfd-core can't populate the of_node and fwnode. As result the watchdog driver can't parse the devicetree. Fixes: 9b40b030c4ad ("mfd: da9062: Supply core driver") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: madera: Allow more time for hardware resetCharles Keepax1-8/+8
Both manual and power on resets have a brief period where the chip will not be accessible immediately afterwards. Extend the time allowed for this from a minimum of 1mS to 2mS based on newer evaluation of the hardware and ensure this reset happens in all reset conditions. Whilst making the change also remove the redundant NULL checks in the reset functions as the GPIO functions already check for this. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: cs47l15: Add missing register defaultCharles Keepax1-0/+1
Accessory detect mode 1 is missing a default, add one to the table. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: madera: Wait for boot done before accessing any other registersCharles Keepax1-2/+15
It is advised to wait for the boot done bit to be set before reading any other register, update the driver to respect this. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: Kconfig: Rename Samsung to lowercaseKrzysztof Kozlowski1-1/+1
Fix up inconsistent usage of upper and lowercase letters in "Samsung" name. "SAMSUNG" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: tqmx86: remove set but not used variable 'i2c_ien'yu kuai1-2/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/mfd/tqmx86.c: In function ‘tqmx86_probe’: drivers/mfd/tqmx86.c:161:29: warning: variable ‘i2c_ien’ set but not used I[-Wunused-but-set-variable] It is never used, and so can be removed. Signed-off-by: yu kuai <yukuai3@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: dbx500-prcmu: Drop DSI pll clock functionsLinus Walleij1-66/+0
The DSI PLLs are handled by the generic clock framework since ages, this code is completely unused and misleading. Delete it. Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: dbx500-prcmu: Drop set_display_clocks()Linus Walleij1-30/+0
The display clocks are handled by the generic clock framework since ages, this code is completely unused and misleading. Delete it. Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: max77650: Select REGMAP_IRQ in KconfigBartosz Golaszewski1-0/+1
MAX77650 MFD driver uses regmap_irq API but doesn't select the required REGMAP_IRQ option in Kconfig. This can cause the following build error if regmap irq is not enabled implicitly by someone else: ld: drivers/mfd/max77650.o: in function `max77650_i2c_probe': max77650.c:(.text+0xcb): undefined reference to `devm_regmap_add_irq_chip' ld: max77650.c:(.text+0xdb): undefined reference to `regmap_irq_get_domain' make: *** [Makefile:1079: vmlinux] Error 1 Fix it by adding the missing option. Fixes: d0f60334500b ("mfd: Add new driver for MAX77650 PMIC") Reported-by: Paul Gazzillo <paul@pgazz.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatileSamuel Holland1-1/+1
On AXP288 and newer PMICs, bit 7 of AXP20X_VBUS_IPSOUT_MGMT can be set to prevent using the VBUS input. However, when the VBUS unplugged and plugged back in, the bit automatically resets to zero. We need to set the register as volatile to prevent regmap from caching that bit. Otherwise, regcache will think the bit is already set and not write the register. Fixes: cd53216625a0 ("mfd: axp20x: Fix axp288 volatile ranges") Cc: stable@vger.kernel.org Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: ab8500: Fix ab8500-clk typoLinus Walleij1-2/+2
Commit f4d41ad84433 ("mfd: ab8500: Example using new OF_MFD_CELL MACRO") has a typo error renaming "ab8500-clk" to "abx500-clk" with the result att ALSA SoC audio broke as the clock driver was not probing anymore. Fixed it up. Fixes: f4d41ad84433 ("mfd: ab8500: Example using new OF_MFD_CELL MACRO") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: intel-lpss: Add Intel Jasper Lake PCI IDsAndy Shevchenko1-0/+13
Intel Jasper Lake has the same LPSS than Intel Ice Lake. Add the new IDs to the list of supported devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: ab8500-core: Add device tree support for AB8505Stephan Gerhold2-8/+32
AB8505 support was never fully converted to the device tree. Most of the MFD cells for AB8505 lack an "of_compatible", which prevents them from being configured through the device tree. Align the definition of the AB8505 MFD cells with the ones for AB8500, and add device tree compatibles. Except for GPIO and regulators the compatibles are equal to those used for AB8500 because the hardware does not differ much. Finally, change db8500_prcmu_register_ab8500() to check for the AB8505 device tree node additionally, and probe it if it is found. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: da9062: add support for the DA9062 GPIOs in the coreMarco Felsch1-1/+15
Currently the da9062 GPIO's aren't available. The patch adds the support to make these available by adding a gpio device with the corresponding irq resources. Furthermore the patch fixes a minor style issue for the onkey device. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: dln2: More sanity checking for endpointsOliver Neukum1-2/+11
It is not enough to check for the number of endpoints. The types must also be correct. Reported-and-tested-by: syzbot+48a2851be24583b864dc@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: sm501: Fix mismatches of request_mem_regionChuhong Yuan1-12/+7
This driver misuses release_resource + kfree to match request_mem_region, which is incorrect. The right way is to use release_mem_region. Replace the mismatched calls with the right ones to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: syscon: Re-use resource_size() to count max_registerAndy Shevchenko1-1/+1
Instead of open coded variant use resource_size() and replace weird '- 3' to more understandable '- 4'. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24Merge branches 'ib-mfd-drm-5.6' and 'ib-mfd-clk-gpio-regulator-rtc-5.6' into ↵Lee Jones5-9/+397
ibs-for-mfd-merged
2020-01-24mfd: bd71828: Add power-key supportMatti Vaittinen1-0/+26
Use gpio_keys to send power input-event to user-space when power button (short) press is detected. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>