summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2016-08-02Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-45/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
2016-08-01Merge tag 'mfd-for-linus-4.8' of ↵Linus Torvalds24-284/+515
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - New API to call bespoke pre/post IRQ handlers; Regmap New Device Support: - Add support for RN5T567 to rn5t618 - Add support for COMe-cSL6 and COMe-mAL10 to kempld-core New Functionality: - Add support for USB Power Supply to axp20x - Add support for Power Key to hi655x-pmic Fix-ups: - Update MAINTAINERS; Dialog, Altera - Remove module support; max77843, max77620, max8998, max8997, max8925-i2c - Add module support; max14577 - Constifying; max77620 - Allow bespoke IRQ masking/unmasking; max77620 - Remove superfluous code; arizona, qcom_rpm, smsc-ece1099 - Power Management fixups; arizona-core - Error-path improvement; twl-core, dm355evm_msp, smsc-ece1099, hi655x - Clocking fixups; twl6040 - Trivial (spelling, headers, coding-style, whitespace, (re)naming); si476x-i2c, omap-usb-tll, ti_am335x_tscadc, tps6507, hi655x-pmic Bug Fixes: - Fix offset error for MSM8660; qcom_rpm - Fix possible spurious IRQs; arizona, hi655x-pmic" * tag 'mfd-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (42 commits) mfd: qcom_rpm: Parametrize also ack selector size mfd: twl6040: Handle mclk used for HPPLL and optional internal clock source mfd: Add support for COMe-cSL6 and COMe-mAL10 to Kontron PLD driver mfd: hi655x: Fix return value check in hi655x_pmic_probe() mfd: smsc-ece1099: Return directly after a function failure in smsc_i2c_probe() mfd: smsc-ece1099: Delete an unnecessary variable initialisation in smsc_i2c_probe() mfd: dm355evm_msp: Return directly after a failed platform_device_alloc() in add_child() mfd: twl-core: Refactoring for add_numbered_child() mfd: twl-core: Return directly after a failed platform_device_alloc() in add_numbered_child() mfd: arizona: Add missing disable of PM runtime on probe error path mfd: stmpe: Move platform data into MFD driver mfd: max14577: Allow driver to be built as a module mfd: max14577: Use module_init() instead of subsys_initcall() mfd: arizona: Remove some duplicate defines mfd: qcom_rpm: Remove unused define mfd: hi655x-pmic: Add powerkey device to hi655x PMIC driver mfd: hi655x-pmic: Rename some interrupt macro names mfd: hi655x-pmic: Fixup issue with un-acked interrupts mfd: arizona: Check if AOD interrupts are pending before dispatching mfd: qcom_rpm: Fix offset error for msm8660 ...
2016-07-20Merge remote-tracking branches 'regulator/topic/qcom-spmi', ↵Mark Brown2-15/+62
'regulator/topic/rn5t618', 'regulator/topic/tps65218' and 'regulator/topic/twl' into regulator-next
2016-07-12mfd: db8500 stop passing around platform dataArnd Bergmann3-45/+3
Except for the constant DB8500_PRCMU_FW_VERSION_OFFSET number, nothing is ever passed through the platform data and used in a driver, so we can simply stop passing it around. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-30mfd: max77620: Fix FPS switch statementsRhyland Klein1-0/+2
When configuring FPS during probe, assuming a DT node is present for FPS, the code can run into a problem with the switch statements in max77620_config_fps() and max77620_get_fps_period_reg_value(). Namely, in the case of chip->chip_id == MAX77620, it will set fps_[mix|max]_period but then fall through to the default switch case and return -EINVAL. Returning this from max77620_config_fps() will cause probe to fail. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: qcom_rpm: Parametrize also ack selector sizeLinus Walleij1-7/+12
The RPM has two sets of selectors (IPC bit fields): request and acknowledge. Apparently, some models use 4*32 bit words for select and some use 7*32 bit words for request, but all use 7*32 words for acknowledge bits. So apparently you can on the models with requests of 4*32 select bits send 4*32 messages and get 7*32 different replies, so on ACK interrupt, 7*32 bit words need to be read. This is how the vendor code apparently works. Cc: stable@vger.kernel.org Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: twl6040: Handle mclk used for HPPLL and optional internal clock sourcePeter Ujfalusi1-12/+29
On some boards, like omap5-uevm the MCLK is gated by default and in order to be able to use the High performance modes of twl6040 it need to be enabled by SW. Add support for handling the MCLK source clock via CCF. At the same time lower the print priority of the notification that the 32K clock is not provided and it is not going to be handled by the driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: Add support for COMe-cSL6 and COMe-mAL10 to Kontron PLD driverMichael Brunner2-0/+18
This is an unmodified resend of the patch already been sent on February 17 as it seems to have fallen through the net. This patch adds the DMI system ID of the Kontron COMe-cSL6 and COME-mAL10 boards to the Kontron PLD driver. The list of supported products in the module description is also updated. Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Acked-by: Christian Rauch <christian.rauch@kontron.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: hi655x: Fix return value check in hi655x_pmic_probe()Wei Yongjun1-5/+2
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Also remove unneeded error handling of platform_get_resource(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: smsc-ece1099: Return directly after a function failure in smsc_i2c_probe()Markus Elfring1-6/+3
This issue was detected by using the Coccinelle software. Return directly if a call of the function "devm_regmap_init_i2c" or "regmap_write" failed. Delete the jump label "err" then. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: smsc-ece1099: Delete an unnecessary variable initialisation in ↵Markus Elfring1-1/+1
smsc_i2c_probe() The variable "ret" will be set to an appropriate value a bit later. Thus omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: dm355evm_msp: Return directly after a failed platform_device_alloc() in ↵Markus Elfring1-5/+2
add_child() The platform_device_put() function was called in one case by the add_child() function during error handling even if the passed variable "pdev" contained a null pointer. Return directly in this case. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: twl-core: Refactoring for add_numbered_child()Markus Elfring1-10/+11
Adjust jump targets according to the Linux coding style convention. Another check for the variable "status" can be omitted then at the end. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: twl-core: Return directly after a failed platform_device_alloc() in ↵Markus Elfring1-5/+2
add_numbered_child() The platform_device_put() function was called in one case by the add_numbered_child() function during error handling even if the passed variable "pdev" contained a null pointer. Return directly in this case. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: arizona: Add missing disable of PM runtime on probe error pathCharles Keepax1-1/+3
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: stmpe: Move platform data into MFD driverLinus Walleij1-12/+28
The STMPE platform data is only populated from the device tree in all existing users, so push the struct and make the OF case the norm. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: max14577: Allow driver to be built as a moduleJavier Martinez Canillas1-2/+2
The driver's Kconfig symbol is a boolean but nothing prevents the driver to be built as a module instead of built-in. It is true that most system integrators will choose the latter but the config should not restrict it. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: max14577: Use module_init() instead of subsys_initcall()Javier Martinez Canillas1-1/+1
The driver's init function is called at subsys init call level but the dependencies provided by the driver are looked up by drivers that have probe deferral support, so manual ordering of init calls isn't needed. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: qcom_rpm: Remove unused defineLinus Walleij1-2/+0
This define RPM_SIGNAL probably pertains to the IPC signal which we ended up fetching from the device tree instead. the define is unused, remove it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: hi655x-pmic: Add powerkey device to hi655x PMIC driverJohn Stultz1-5/+30
Wire up the powerkey driver functionality for the hi655x PMIC. Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: hi655x-pmic: Rename some interrupt macro namesJohn Stultz1-8/+8
Currently the hi655x-pmic driver has names for interrupt mask values, but not for the interrupt numbers themselves. So to allow for interrupt numbers to have sane names, rename the mask values with the _MASK postfix and use the existing names as the interrupt name Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: hi655x-pmic: Fixup issue with un-acked interruptsJohn Stultz1-0/+1
While trying to get the powerkey to function, I found when pressing the key, I would get infinitely repeating interrupts. After digging around a bit, it seems we didn't set the ack_base value for the regmap irqchip logic, so nothing was acking the interrupt. This patch adds the ack_base, which seems to make things work. Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: arizona: Check if AOD interrupts are pending before dispatchingRichard Fitzgerald1-2/+14
Previously the arizona_irq_thread implementation would call handle_nested_irqs() to handle AOD interrupts without checking if any were actually pending. The kernel will see these as spurious IRQs and will eventually disable the IRQ. This patch ensures we only launch the nested handler if there are AOD interrupts pending in the codec. Signed-off-by: Simon Trimmer <simont@opensource.wolfsonmicro.com> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: qcom_rpm: Fix offset error for msm8660Linus Walleij1-14/+36
The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: ti_am335x_tscadc: Rename regmap_tscadc to regmapAndrew F. Davis1-18/+18
The regmap structure pointer is named regmap_tscadc, this is not consistent with other drivers and is redundant, it also contributes to several checkpatch warnings involving long lines. Rename this. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: ti_am335x_tscadc: Unify variable naming when referencing ti_tscadc_devAndrew F. Davis1-44/+44
All functions in this driver reference the same ti_tscadc_dev per device but use several different names for this structure pointer, this can be confusing when following the code. Use the name 'tscadc' everywhere. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: max77620: Mask/unmask interrupt before/after servicing itLaxman Dewangan1-9/+46
The programming guidelines of the MAX77620 for servicing interrupt is: 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM. 2. Read IRQTOP and service the interrupt. 3. Once all interrupts has been checked and serviced, the interrupt service routine un-masks the hardware interrupt line by clearing GLBLM. Add the pre and post interrupt service handler for mask and unmask the global interrupt mask bit (for step 1 and 3) as callback from regmap-irq. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: axp20x: Add axp20x-usb-power-supply for axp22x pmicsHans de Goede1-0/+10
Add axp20x-usb-power-supply for axp22x pmics. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: altr_a10sr: Add Altera Arria10 DevKit System Resource ChipThor Thayer3-0/+182
Add support for the Altera Arria10 Development Kit System Resource chip which is implemented using a MAX5 as a external gpio extender with the regmap framework over a SPI bus. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: tps6507: Fix white space warnings reported by checkpatchBen Copeland1-2/+2
WARNING: please, no spaces at the start of a line + { "tps6507x", 0 },$ WARNING: please, no spaces at the start of a line + { }$ Signed-off-by: Ben Copeland <ben.copeland@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: ti_am335x_tscadc: Use SIMPLE_DEV_PM_OPS helper macroAndrew F. Davis1-12/+4
Replace ifdefs with SIMPLE_DEV_PM_OPS helper macro. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: ti_am335x_tscadc: Remove use of single line functionsAndrew F. Davis1-29/+15
tscadc_readl and tscadc_writel are single line functions and do not save use anything, remove these. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: ti_am335x_tscadc: Use variable name for sizeof() operatorAndrew F. Davis1-2/+1
Fix the code formatting to use the kernel preferred style of using the actual variables to determine the size using the sizeof() operator. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: omap-usb-tll: Include omap-usb.hBen Dooks1-0/+2
Fix the warnings about the following functions not being declared by including omap-usb.h which declares them: drivers/mfd/omap-usb-tll.c:333:5: warning: symbol 'omap_tll_init' was not declared. Should it be static? drivers/mfd/omap-usb-tll.c:408:5: warning: symbol 'omap_tll_enable' was not declared. Should it be static? drivers/mfd/omap-usb-tll.c:442:5: warning: symbol 'omap_tll_disable' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: axp20x: Add a 500ms delay at the end of axp20x_power_offHans de Goede1-0/+4
The kernel expects the power_off function to not return, and if it does it panics. Add a slight delay after the i2c write which turns off power through the PMIC, to give capacitors etc. some time to drain. Without this the kernel lives on long enough after the poweroff to print the following on the serial console on my Mele A1000G quad: [ 248.583588] reboot: Power down [ 248.600490] Kernel pa With the delay the start of printing "Kernel panic" is gone. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: max77620: Constify resources tablesAxel Lin1-4/+4
These tables are never modified, so declare them as const. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: si476x-i2c: Fix spelling mistake "comptible" -> "compatible"Colin Ian King1-1/+1
trivial fix to spelling mistake in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: max8925-i2c: Make it explicitly non-modularPaul Gortmaker1-13/+1
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig: config MFD_MAX8925 drivers/mfd/Kconfig: bool "Maxim Semiconductor MAX8925 PMIC Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: max8997: Make it explicitly non-modularPaul Gortmaker1-27/+3
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_MAX8997 drivers/mfd/Kconfig: bool "Maxim Semiconductor MAX8997/8966 PMIC Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: max8998: Make it explicitly non-modularPaul Gortmaker1-26/+1
The Kconfig currently controlling compilation of this code is: mfd/Kconfig:config MFD_MAX8998 mfd/Kconfig: bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. We delete the include of module.h as well as an unused include of moduleparam.h too. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: max77620: Make it explicitly non-modularPaul Gortmaker1-10/+2
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_MAX77620 drivers/mfd/Kconfig: bool "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_i2c_driver() uses the same init level priority as builtin_i2c_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: max77843: Make it explicitly non-modularPaul Gortmaker1-22/+2
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_MAX77843 drivers/mfd/Kconfig: bool "Maxim Semiconductor MAX77843 PMIC Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_i2c_driver() uses the same init level priority as builtin_i2c_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: axp20x: Extend axp22x_volatile_rangesHans de Goede1-0/+3
The axp22x pmic has a bunch of volatile registers besides the interrupt ones, extend axp22x_volatile_ranges with these. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: rn5t618: Register restart handlerStefan Agner1-6/+37
Use the PMIC's repower capability for reboots. Register a restart handler and use a slightly elevated priority of 192 since the PMIC has suprior reset capability (causing a system wide reset). Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: rn5t618: Register power off callback optionallyStefan Agner1-3/+7
Only register power off if the PMIC is defined as system power controller (see Documentation/devicetree/bindings/power/ power-controller.txt). Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: rn5t618: Add Ricoh RN5T567 PMIC supportStefan Agner2-10/+22
The Ricoh RN5T567 is from the same family as the Ricoh RN5T618 is, the differences are: + DCDC4 + Slightly different output voltage/currents + 32kHz Output - ADC/Charger capabilities Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-28remove lots of IS_ERR_VALUE abusesArnd Bergmann1-1/+1
Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20Merge tag 'mfd-for-linus-4.7' of ↵Linus Torvalds55-482/+1139
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add new driver for MAXIM MAX77620/MAX20024 PMIC - Add new driver for Hisilicon HI665X PMIC New Device Support: - Add support for AXP809 in axp20x-rsb - Add support for Power Supply in axp20x New core features: - devm_mfd_* managed resources Fix-ups: - Remove unused code (da9063-irq, wm8400-core, tps6105x, smsc-ece1099, twl4030-power) - Improve clean-up in error path (intel_quark_i2c_gpio) - Explicitly include headers (syscon.h) - Allow building as modules (max77693) - Use IS_ENABLED() instead of rolling your own (dm355evm_msp, wm8400-core) - DT adaptions (axp20x, hi655x, arizona, max77620) - Remove CLK_IS_ROOT flag (intel-lpss, intel_quark) - Move to gpiochip API (asic3, dm355evm_msp, htc-egpio, htc-i2cpld, sm501, tc6393xb, tps65010, ucb1x00, vexpress) - Make use of devm_mfd_* calls (act8945a, as3711, atmel-hlcdc, bcm590xx, hi6421-pmic-core, lp3943, menf21bmc, mt6397, rdc321x, rk808, rn5t618, rt5033, sky81452, stw481x, tps6507x, tps65217, wm8400) Bug Fixes" - Fix ACPI child matching (mfd-core) - Fix start-up ordering issues (mt6397-core, arizona-core) - Fix forgotten register state on resume (intel-lpss) - Fix Clock related issues (twl6040) - Fix scheduling whilst atomic (omap-usb-tll) - Kconfig changes (vexpress)" * tag 'mfd-for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits) mfd: hi655x: Add MFD driver for hi655x mfd: ab8500-debugfs: Trivial fix of spelling mistake on "between" mfd: vexpress: Add !ARCH_USES_GETTIMEOFFSET dependency mfd: Add device-tree binding doc for PMIC MAX77620/MAX20024 mfd: max77620: Add core driver for MAX77620/MAX20024 mfd: arizona: Add defines for GPSW values that can be used from DT mfd: omap-usb-tll: Fix scheduling while atomic BUG mfd: wm5110: ARIZONA_CLOCK_CONTROL should be volatile mfd: axp20x: Add a cell for the ac power_supply part of the axp20x PMICs mfd: intel_soc_pmic_core: Terminate panel control GPIO lookup table correctly mfd: wl1273-core: Use devm_mfd_add_devices() for mfd_device registration mfd: tps65910: Use devm_mfd_add_devices and devm_regmap_add_irq_chip mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip mfd: rc5t583: Use devm_mfd_add_devices and devm_request_threaded_irq mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip mfd: as3722: Use devm_mfd_add_devices and devm_regmap_add_irq_chip mfd: twl4030-power: Remove driver path in file comment MAINTAINERS: Add entry for X-Powers AXP family PMIC drivers mfd: smsc-ece1099: Remove unnecessarily remove callback mfd: Use IS_ENABLED(CONFIG_FOO) instead of checking FOO || FOO_MODULE ...
2016-05-18mfd: hi655x: Add MFD driver for hi655xChen Feng3-0/+173
Add PMIC MFD driver to support hisilicon hi665x. Signed-off-by: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Fei Wang <w.f@huawei.com> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-18Merge tag 'gpio-v4.7-1' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel cycle v4.7: Core infrastructural changes: - Support for natively single-ended GPIO driver stages. This means that if the hardware has registers to configure open drain or open source configuration, we use that rather than (as we did before) try to emulate it by switching the line to an input to get high impedance. This is also documented throughly in Documentation/gpio/driver.txt for those of you who did not understand one word of what I just wrote. - Start to do away with the unnecessarily complex and unitelligible ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from the time when the GPIO subsystem was unmaintained. Archs can now just select GPIOLIB and be done with it, cleanups to arches will trickle in for the next kernel. Some minor archs ACKed the changes immediately so these are included in this pull request. - Advancing the use of the data pointer inside the GPIO device for storing driver data by switching the PowerPC, Super-H Unicore and a few other subarches or subsystem drivers in ALSA SoC, Input, serial, SSB, staging etc to use it. - The initialization now reads the input/output state of the GPIO lines, so that each GPIO descriptor knows - if this callback is implemented - whether the line is input or output. This also reflects nicely in userspace "lsgpio". - It is now possible to name GPIO producer names, line names, from the device tree. (Platform data has been supported for a while). I bet we will get a similar mechanism for ACPI one of those days. This makes is possible to get sensible producer names for e.g. GPIO rails in "lsgpio" in userspace. New drivers: - New driver for the Loongson1. - The XLP driver now supports Broadcom Vulcan ARM64. - The IT87 driver now supports IT8620 and IT8628. - The PCA953X driver now supports Galileo Gen2. Driver improvements: - MCP23S08 was switched to use the gpiolib irqchip helpers and now also suppors level-triggered interrupts. - 74x164 and RCAR now supports the .set_multiple() callback - AMDPT was converted to use generic GPIO. - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994 support the new single ended callback for open drain and in some cases open source. - Implement the .get_direction() callback for a few more drivers like PL061, Xgene. Cleanups: - Paul Gortmaker combed through the drivers and de-modularized those who are not really modules. - Move the GPIO poweroff DT bindings to the power subdir where they belong. - Rename gpio-generic.c to gpio-mmio.c, which is much more to the point. That's what it is handling, nothing more, nothing less" * tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits) MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB gpio: zevio: make it explicitly non-modular gpio: timberdale: make it explicitly non-modular gpio: stmpe: make it explicitly non-modular gpio: sodaville: make it explicitly non-modular pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms gpio: dt-bindings: add wd,mbl-gpio bindings gpio: of: make it possible to name GPIO lines gpio: make gpiod_to_irq() return negative for NO_IRQ gpio: xgene: implement .get_direction() gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver gpio: tegra: Implement gpio_get_direction callback gpio: set up initial state from .get_direction() gpio: rename gpio-generic.c into gpio-mmio.c gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case gpio: dwapb: add gpio-signaled acpi event support gpio: dwapb: convert device node to fwnode gpio: dwapb: remove name from dwapb_port_property gpio/qoriq: select IRQ_DOMAIN ...