summaryrefslogtreecommitdiff
path: root/drivers/misc
AgeCommit message (Collapse)AuthorFilesLines
2016-04-07lkdtm: do not leak free page on kmalloc failureKees Cook1-1/+3
This frees the allocated page if there is a kmalloc failure. Signed-off-by: Kees Cook <keescook@chromium.org>
2016-04-07lkdtm: fix memory leak of baseSudip Mukherjee1-1/+3
This case is supposed to read from a memory after it has been freed, but we missed freeing base if the memory 'val' could not be allocated. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-04-07lkdtm: fix memory leak of valSudip Mukherjee1-1/+2
This case is supposed to read from a page after after it is freed, but it missed freeing val if we are not able to get a free page. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov2-3/+3
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-21Merge branch 'mm-pkeys-for-linus' of ↵Linus Torvalds2-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 protection key support from Ingo Molnar: "This tree adds support for a new memory protection hardware feature that is available in upcoming Intel CPUs: 'protection keys' (pkeys). There's a background article at LWN.net: https://lwn.net/Articles/643797/ The gist is that protection keys allow the encoding of user-controllable permission masks in the pte. So instead of having a fixed protection mask in the pte (which needs a system call to change and works on a per page basis), the user can map a (handful of) protection mask variants and can change the masks runtime relatively cheaply, without having to change every single page in the affected virtual memory range. This allows the dynamic switching of the protection bits of large amounts of virtual memory, via user-space instructions. It also allows more precise control of MMU permission bits: for example the executable bit is separate from the read bit (see more about that below). This tree adds the MM infrastructure and low level x86 glue needed for that, plus it adds a high level API to make use of protection keys - if a user-space application calls: mmap(..., PROT_EXEC); or mprotect(ptr, sz, PROT_EXEC); (note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice this special case, and will set a special protection key on this memory range. It also sets the appropriate bits in the Protection Keys User Rights (PKRU) register so that the memory becomes unreadable and unwritable. So using protection keys the kernel is able to implement 'true' PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies PROT_READ as well. Unreadable executable mappings have security advantages: they cannot be read via information leaks to figure out ASLR details, nor can they be scanned for ROP gadgets - and they cannot be used by exploits for data purposes either. We know about no user-space code that relies on pure PROT_EXEC mappings today, but binary loaders could start making use of this new feature to map binaries and libraries in a more secure fashion. There is other pending pkeys work that offers more high level system call APIs to manage protection keys - but those are not part of this pull request. Right now there's a Kconfig that controls this feature (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled (like most x86 CPU feature enablement code that has no runtime overhead), but it's not user-configurable at the moment. If there's any serious problem with this then we can make it configurable and/or flip the default" * 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits) x86/mm/pkeys: Fix mismerge of protection keys CPUID bits mm/pkeys: Fix siginfo ABI breakage caused by new u64 field x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA mm/core, x86/mm/pkeys: Add execute-only protection keys support x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags x86/mm/pkeys: Allow kernel to modify user pkey rights register x86/fpu: Allow setting of XSAVE state x86/mm: Factor out LDT init from context init mm/core, x86/mm/pkeys: Add arch_validate_pkey() mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits() x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU x86/mm/pkeys: Add Kconfig prompt to existing config option x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps x86/mm/pkeys: Dump PKRU with other kernel registers mm/core, x86/mm/pkeys: Differentiate instruction fetches x86/mm/pkeys: Optimize fault handling in access_error() mm/core: Do not enforce PKEY permissions on remote mm access um, pkeys: Add UML arch_*_access_permitted() methods mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys x86/mm/gup: Simplify get_user_pages() PTE bit handling ...
2016-03-20Merge tag 'powerpc-4.6-1' of ↵Linus Torvalds20-732/+4469
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This was delayed a day or two by some build-breakage on old toolchains which we've now fixed. There's two PCI commits both acked by Bjorn. There's one commit to mm/hugepage.c which is (co)authored by Kirill. Highlights: - Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V - Add POWER9 cputable entry from Michael Neuling - FPU/Altivec/VSX save/restore optimisations from Cyril Bur - Add support for new ftrace ABI on ppc64le from Torsten Duwe Various cleanups & minor fixes from: - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh. General: - atomics: Allow architectures to define their own __atomic_op_* helpers from Boqun Feng - Implement atomic{, 64}_*_return_* variants and acquire/release/ relaxed variants for (cmp)xchg from Boqun Feng - Add powernv_defconfig from Jeremy Kerr - Fix BUG_ON() reporting in real mode from Balbir Singh - Add xmon command to dump OPAL msglog from Andrew Donnellan - Add xmon command to dump process/task similar to ps(1) from Douglas Miller - Clean up memory hotplug failure paths from David Gibson pci/eeh: - Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei Yang. - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan. - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang - PCI: Add pcibios_bus_add_device() weak function from Wei Yang - MAINTAINERS: Update EEH details and maintainership from Russell Currey cxl: - Support added to the CXL driver for running on both bare-metal and hypervisor systems, from Christophe Lombard and Frederic Barrat. - Ignore probes for virtual afu pci devices from Vaibhav Jain perf: - Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu - hv-24x7: Fix usage with chip events, display change in counter values, display domain indices in sysfs, eliminate domain suffix in event names, from Sukadev Bhattiprolu Freescale: - Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and other dt bits, and minor fixes/cleanup" * tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits) powerpc: Fix unrecoverable SLB miss during restore_math() powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers powerpc/rcpm: Fix build break when SMP=n powerpc/book3e-64: Use hardcoded mttmr opcode powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible powerpc/T104xRDB: add tdm riser card node to device tree powerpc32: PAGE_EXEC required for inittext powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s) powerpc/86xx: Introduce and use common dtsi powerpc/86xx: Update device tree powerpc/86xx: Move dts files to fsl directory powerpc/86xx: Switch to kconfig fragments approach powerpc/86xx: Update defconfigs powerpc/86xx: Consolidate common platform code powerpc32: Remove one insn in mulhdu powerpc32: small optimisation in flush_icache_range() powerpc: Simplify test in __dma_sync() powerpc32: move xxxxx_dcache_range() functions inline powerpc32: Remove clear_pages() and define clear_page() inline ...
2016-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+4
Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...
2016-03-18Merge tag 'sound-4.6-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "After a heavy storm by syzkaller in 4.5 cycle, we have relatively few changes in the core at this time while a lot of changes are found in the driver side, unsurprisingly. Below are some highlights: ALSA core: - A few more hardening in ALSA timer codes - An extension of sequencer API for advertising the card / pid - Small fixes in compress-offload and jack layers HD-audio: - Dynamic PCM assignment in HDMI/DP codec; preparation for upcoming DP-MST support - Lots of code refactoring for sharing with ASoC SKL driver - Regression fixes for Intel HDMI/DP - Fixups for CX20724 codec, Lenovo AiO USB-audio: - Add quirk_alias option to make quirk debugging easier - Fixes for possible Oops by malformed firmware Firewire: - Add support for FW-1804 in tascam driver - Improvements / changes in card registration, multi stream handling, etc for DICE - Lots of code refactoring ASoC: - Enhancements of still ongoing topology API - Lots of commits for Intel Skylake support including HDMI support - A few Intel Atom driver updates for recent devices - Lots of improvements to the Renesas drivers - Capture support for Qualcomm drivers - Support for TI DaVinci DRA7xxx devices - New machine drivers for Freescale systems with Cirrus CODECs, Mediatek systems with RT5650 CODECs - New CPU drivers for Allwinner S/PDIF controllers - New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514" * tag 'sound-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (291 commits) ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug ALSA: ctl: change return value in compatibility layer so that it's the same value in core implementation ALSA: mixart: silence an uninitialized variable warning ALSA: usb-audio: Add sanity checks for endpoint accesses ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk() ALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk() ALSA: hda - Limit i915 HDMI binding only for HSW and later ALSA: hda - Fix unconditional GPIO toggle via automute ALSA: mixart: silence unitialized variable warnings ALSA: hda - Fixes double fault in nvhdmi_chmap_cea_alloc_validate_get_type ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41. ALSA: hda - Add new GPU codec ID 0x10de0082 to snd-hda ASoC: rsnd: add simplified module explanation ASoC: hdac_hdmi: Add broxton device ID ASoC: Intel: Bxtn: Add Broxton PCI ID ASoC: Intel: Skylake: Move Skylake dsp ops & loader ops ASoC: Intel: add dmabuffer to common sst_dsp ASoC: Intel: Skylake: Unstatify skl_dsp_enable_core ASoC: Intel: Skylake: Fix whitepsace issues ASoC: Intel: Skylake: Move module id defines ...
2016-03-18Merge tag 'staging-4.6-rc1' of ↵Linus Torvalds3-0/+2717
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big staging driver pull request for 4.6-rc1. Lots of little things here, over 1600 patches or so. Notable is all of the good Lustre work happening, those developers have finally woken up and are cleaning up their code greatly. The Outreachy intern application process is also happening, which brought in another 400 or so patches. Full details are in the very long shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits) staging: lustre: fix aligments in lnet selftest staging: lustre: report minimum of two buffers for LNet selftest load test staging: lustre: test for proper errno code in lstcon_rpc_trans_abort staging: lustre: filter remaining extra spacing for lnet selftest staging: lustre: remove extra spacing when setting variable for lnet selftest staging: lustre: remove extra spacing of variable declartions for lnet selftest staging: lustre: fix spacing issues checkpatch reported in lnet selftest staging: lustre: remove returns in void function for lnet selftest staging: lustre: fix bogus lst errors for lnet selftest staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc staging: android: ion: fix up file mode staging: ion: debugfs invalid gfp mask staging: rts5208: Replace pci_enable_device with pcim_enable_device Staging: ieee80211: Place constant on right side of the test. staging: speakup: Replace del_timer with del_timer_sync staging: lowmemorykiller: fix 2 checks that checkpatch complained staging: mt29f_spinand: Drop void pointer cast staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED ...
2016-03-17Merge tag 'char-misc-4.6-rc1' of ↵Linus Torvalds70-3266/+3952
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big char/misc driver update for 4.6-rc1. The majority of the patches here is hwtracing and some new mic drivers, but there's a lot of other driver updates as well. Full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'char-misc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (238 commits) goldfish: Fix build error of missing ioremap on UM nvmem: mediatek: Fix later provider initialization nvmem: imx-ocotp: Fix return value of imx_ocotp_read nvmem: Fix dependencies for !HAS_IOMEM archs char: genrtc: replace blacklist with whitelist drivers/hwtracing: make coresight-etm-perf.c explicitly non-modular drivers: char: mem: fix IS_ERROR_VALUE usage char: xillybus: Fix internal data structure initialization pch_phub: return -ENODATA if ROM can't be mapped Drivers: hv: vmbus: Support kexec on ws2012 r2 and above Drivers: hv: vmbus: Support handling messages on multiple CPUs Drivers: hv: utils: Remove util transport handler from list if registration fails Drivers: hv: util: Pass the channel information during the init call Drivers: hv: vmbus: avoid unneeded compiler optimizations in vmbus_wait_for_unload() Drivers: hv: vmbus: remove code duplication in message handling Drivers: hv: vmbus: avoid wait_for_completion() on crash Drivers: hv: vmbus: don't loose HVMSG_TIMER_EXPIRED messages misc: at24: replace memory_accessor with nvmem_device_read eeprom: 93xx46: extend driver to plug into the NVMEM framework eeprom: at25: extend driver to plug into the NVMEM framework ...
2016-03-17Merge tag 'pci-v4.6-changes' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for v4.6: Enumeration: - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas) - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas Resource management: - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas) - Don't assign or reassign immutable resources (Bjorn Helgaas) - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas) - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas) - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas) - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas) - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas) - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas) - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) Virtualization: - Wait for up to 1000ms after FLR reset (Alex Williamson) - Support SR-IOV on any function type (Kelly Zytaruk) - Add ACS quirk for all Cavium devices (Manish Jaggi) AER: - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas) - Restore pci_ops pointer while calling original pci_ops (David Daney) - Fix aer_inject error codes (Jean Delvare) - Use dev_warn() in aer_inject (Jean Delvare) - Log actual error causes in aer_inject (Jean Delvare) - Log aer_inject error injections (Jean Delvare) VPD: - Prevent VPD access for buggy devices (Babu Moger) - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas) - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas) - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas) - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas) - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas) - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas) - Update VPD definitions (Hannes Reinecke) - Allow access to VPD attributes with size 0 (Hannes Reinecke) - Determine actual VPD size on first access (Hannes Reinecke) Generic host bridge driver: - Move structure definitions to separate header file (David Daney) - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney) - Expose pci_host_common_probe() for use by other drivers (David Daney) Altera host bridge driver: - Fix altera_pcie_link_is_up() (Ley Foon Tan) Cavium ThunderX host bridge driver: - Add PCIe host driver for ThunderX processors (David Daney) - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney) Freescale i.MX6 host bridge driver: - Add DT bindings to configure PHY Tx driver settings (Justin Waters) - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach) - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach) - Remove broken Gen2 workaround (Lucas Stach) - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach) Freescale Layerscape host bridge driver: - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi) Intel VMD host bridge driver: - Attach VMD resources to parent domain's resource tree (Jon Derrick) - Set bus resource start to 0 (Keith Busch) Microsoft Hyper-V host bridge driver: - Add fwnode_handle to x86 pci_sysdata (Jake Oshins) - Look up IRQ domain by fwnode_handle (Jake Oshins) - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins) NVIDIA Tegra host bridge driver: - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding) - Implement ->{add,remove}_bus() callbacks (Thierry Reding) - Remove unused struct tegra_pcie.num_ports field (Thierry Reding) - Track bus -> CPU mapping (Thierry Reding) - Remove misleading PHYS_OFFSET (Thierry Reding) Renesas R-Car host bridge driver: - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman) Synopsys DesignWare host bridge driver: - ARC: Add PCI support (Joao Pinto) - Add generic dw_pcie_wait_for_link() (Joao Pinto) - Add default link up check if sub-driver doesn't override (Joao Pinto) - Add driver for prototyping kits based on ARC SDP (Joao Pinto) TI Keystone host bridge driver: - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin) Xilinx AXI host bridge driver: - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada) - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada) - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada) - Update Zynq binding with Microblaze node (Bharat Kumar Gogada) - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada) Xilinx NWL host bridge driver: - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada) Miscellaneous: - Check device_attach() return value always (Bjorn Helgaas) - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas) - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas) - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove includes of asm/pci-bridge.h (Bjorn Helgaas) - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas) - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas) - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler) - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas) - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa) - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig) - Move pci_dma_* helpers to common code (Christoph Hellwig) - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus) - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson) - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)" * tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: designware: Add driver for prototyping kits based on ARC SDP PCI: designware: Add default link up check if sub-driver doesn't override PCI: designware: Add generic dw_pcie_wait_for_link() PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Simplify pci_create_attr() control flow PCI: Don't leak memory if sysfs_create_bin_file() fails PCI: Simplify sysfs ROM cleanup PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource MIPS: Loongson 3: Use temporary struct resource * to avoid repetition ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource ia64/PCI: Use ioremap() instead of open-coded equivalent ia64/PCI: Use temporary struct resource * to avoid repetition PCI: Clean up pci_map_rom() whitespace PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() ...
2016-03-15Merge branch 'mm-readonly-for-linus' of ↵Linus Torvalds1-3/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull read-only kernel memory updates from Ingo Molnar: "This tree adds two (security related) enhancements to the kernel's handling of read-only kernel memory: - extend read-only kernel memory to a new class of formerly writable kernel data: 'post-init read-only memory' via the __ro_after_init attribute, and mark the ARM and x86 vDSO as such read-only memory. This kind of attribute can be used for data that requires a once per bootup initialization sequence, but is otherwise never modified after that point. This feature was based on the work by PaX Team and Brad Spengler. (by Kees Cook, the ARM vDSO bits by David Brown.) - make CONFIG_DEBUG_RODATA always enabled on x86 and remove the Kconfig option. This simplifies the kernel and also signals that read-only memory is the default model and a first-class citizen. (Kees Cook)" * 'mm-readonly-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ARM/vdso: Mark the vDSO code read-only after init x86/vdso: Mark the vDSO code read-only after init lkdtm: Verify that '__ro_after_init' works correctly arch: Introduce post-init read-only memory x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings asm-generic: Consolidate mark_rodata_ro()
2016-03-14misc: sram: add optional ioremap without write combiningMarcin Wojtas1-1/+4
Some SRAM users may require non-bufferable access to the memory, which is impossible, because devm_ioremap_wc() is used for setting sram->virt_base. This commit adds optional flag 'no-memory-wc', which allow to choose remap method, using DT property. Documentation is updated accordingly. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13Merge remote-tracking branches 'asoc/topic/atmel', 'asoc/topic/bcm2835' and ↵Mark Brown1-0/+1
'asoc/topic/cs42xx8' into asoc-next
2016-03-09cxl: Ignore probes for virtual afu pci devicesVaibhav Jain3-0/+16
Add a check at the beginning of cxl_probe function to ignore virtual pci devices created for each afu registered. This fixes the the errors messages logged about missing CXL vsec, when cxl probe is unable to find necessary vsec entries in device pci config space. The error message logged are of the form : cxl-pci 0004:00:00.0: ABORTING: CXL VSEC not found! cxl-pci 0004:00:00.0: cxl_init_adapter failed: -19 Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: fbarrat@linux.vnet.ibm.com Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Remove cxl_get_phys_dev() kernel APIFrederic Barrat1-1/+0
The cxl_get_phys_dev() API returns a struct device pointer which could belong to either a struct pci_dev (bare-metal) or platform_device (powerVM). To avoid potential problems in drivers, remove that API. It was introduced to allow drivers to read the VPD of the adapter, but the cxl driver now provides the cxl_pci_read_adapter_vpd() API for that purpose. Co-authored-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Add tracepoints around the cxl hcallChristophe Lombard2-0/+202
To ease debugging, add a few tracepoints around the cxl hcalls. Co-authored-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Adapter failure handlingChristophe Lombard7-35/+198
Check the AFU state whenever an API is called. The hypervisor may issue a reset of the adapter when it detects a fault. When it happens, it launches an error recovery which will either move the AFU to a permanent failure state, or in the disabled state. If the AFU is found to be disabled, detach all existing contexts from it before issuing a AFU reset to re-enable it. Before detaching contexts, notify any kernel driver through the EEH callbacks of the AFU pci device. Co-authored-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Support the cxl kernel API from a guestFrederic Barrat6-110/+198
Like on bare-metal, the cxl driver creates a virtual PHB and a pci device for the AFU. The configuration space of the device is mapped to the configuration record of the AFU. Reuse the code defined in afu_cr_read8|16|32() when reading the configuration space of the AFU device. Even though the (virtual) AFU device is a pci device, the adapter is not. So a driver using the cxl kernel API cannot read the VPD of the adapter through the usual PCI interface. Therefore, we add a call to the cxl kernel API: ssize_t cxl_read_adapter_vpd(struct pci_dev *dev, void *buf, size_t count); Co-authored-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Parse device tree and create cxl device(s) at bootFrederic Barrat1-0/+25
Add new entry point to scan the device tree at boot in a guest, looking for cxl devices. Co-authored-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Support to flash a new image on the adapter from a guestChristophe Lombard6-5/+574
The new flash.c file contains the logic to flash a new image on the adapter, through a hcall. It is an iterative process, with chunks of data of 1M at a time. There are also 2 phases: write and verify. The flash operation itself is driven from a user-land tool. Once flashing is successful, an rtas call is made to update the device tree with the new properties values for the adapter and the AFU(s) Add a new char device for the adapter, so that the flash tool can access the card, even if there is no valid AFU on it. Co-authored-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: sysfs support for guestsChristophe Lombard4-20/+108
Filter out a few adapter parameters which don't make sense in a guest. Document the changes. Co-authored-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Add guest-specific codeChristophe Lombard10-11/+1525
The new of.c file contains code to parse the device tree to find out about cxl adapters and AFUs. guest.c implements the guest-specific callbacks for the backend API. The process element ID is not known until the context is attached, so we have to separate the context ID assigned by the cxl driver from the process element ID visible to the user applications. In bare-metal, the 2 IDs match. Co-authored-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> [mpe: Fix SMP=n build, fix PSERIES=n build, minor whitespace fixes] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Separate bare-metal fields in adapter and AFU data structuresChristophe Lombard8-111/+164
Introduce sub-structures containing the bare-metal specific fields in the structures describing the adapter (struct cxl) and AFU (struct cxl_afu). Update all their references. Co-authored-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: New hcalls to support cxl adaptersChristophe Lombard5-2/+890
The hypervisor calls provide an interface with a coherent platform facility and function. It matches version 0.16 of the 'PAPR changes' document. The following hcalls are supported: H_ATTACH_CA_PROCESS Attach a process element to a coherent platform function. H_DETACH_CA_PROCESS Detach a process element from a coherent platform function. H_CONTROL_CA_FUNCTION Allow the partition to manipulate or query certain coherent platform function behaviors. H_COLLECT_CA_INT_INFO Collect interrupt info about a coherent. platform function after an interrupt occurred H_CONTROL_CA_FAULTS Control the operation of a coherent platform function after a fault occurs. H_DOWNLOAD_CA_FACILITY Support for downloading a base adapter image to the coherent platform facility, and for validating the entire image after the download. H_CONTROL_CA_FACILITY Allow the partition to manipulate or query certain coherent platform facility behaviors. Co-authored-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: IRQ allocation for guestsFrederic Barrat1-14/+64
The PSL interrupt cannot be multiplexed in a guest, as it is not supported by the hypervisor. So an interrupt will be allocated for it for each context. It will still be the first interrupt found in the first interrupt range, but is treated almost like any other AFU interrupt when creating/deleting the context. Only the handler is different. Rework the code so that the range 0 is treated like the other ranges. Co-authored-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Update cxl_irq() prototypeFrederic Barrat2-3/+2
The context parameter when calling cxl_irq() should be strongly typed. Co-authored-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Isolate a few bare-metal-specific callsFrederic Barrat4-11/+22
A few functions are mostly common between bare-metal and guest and just need minor tuning. To avoid crowding the backend API, introduce a few 'if' based on the CPU being in HV mode. Co-authored-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Rename some bare-metal specific functionsFrederic Barrat3-100/+104
Rename a few functions, changing the 'cxl_' prefix to either 'cxl_pci_' or 'cxl_native_', to make clear that the implementation is bare-metal specific. Those functions will have an equivalent implementation for a guest in a later patch. Co-authored-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Introduce implementation-specific APIFrederic Barrat11-120/+185
The backend API (in cxl.h) lists some low-level functions whose implementation is different on bare-metal and in a guest. Each environment implements its own functions, and the common code uses them through function pointers, defined in cxl_backend_ops Co-authored-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Define process problem state area at attach time onlyFrederic Barrat1-9/+2
CXL kernel API was defining the process problem state area during context initialization, making it possible to map the problem state area before attaching the context. This won't work on a powerVM guest. So force the logical behavior, like in userspace: attach first, then map the problem state area. Remove calls to cxl_assign_psn_space during init. The function is already called on the attach paths. Co-authored-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Move bare-metal specific code to specialized filesFrederic Barrat5-244/+245
Move a few functions around to better separate code specific to bare-metal environment from code which will be commonly used between guest and bare-metal. Code specific to bare-metal is meant to be in native.c or pci.c only. It's basically anything which touches the card p1 registers, some p2 registers not needed from a guest and the PCI interface. Co-authored-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Move common code away from bare-metal-specific filesChristophe Lombard5-75/+84
Move around some functions which will be accessed from the bare-metal and guest environments. Code in native.c and pci.c is meant to be bare-metal specific. Other files contain code which may be shared with guests. Co-authored-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-06Merge tag 'powerpc-4.5-5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - cxl: Fix PSL timebase synchronization detection from Frederic Barrat - Fix oops when destroying hw_breakpoint event from Ravi Bangoria - Avoid lbarx on e5500 from Scott Wood * tag 'powerpc-4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/fsl-book3e: Avoid lbarx on e5500 powerpc/hw_breakpoint: Fix oops when destroying hw_breakpoint event cxl: Fix PSL timebase synchronization detection
2016-03-05pch_phub: return -ENODATA if ROM can't be mappedColin Ian King1-1/+3
The error return err is not initialized for the case when pci_map_rom fails and no ROM can me mapped. Fix this by setting ret to -ENODATA; (this is the same error value that is returned if the ROM data is successfully mapped but does not match the expected ROM signature.). Issue found from static code analysis using CoverityScan. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02ASoC: atmel_ssc_dai: distinguish the different SSCSongjun Wu1-0/+1
Cpu_dai id always equals 0, can't distinguish the different SSC. Use platform_device id to record and distinguish the different SSC. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02misc: at24: replace memory_accessor with nvmem_device_readAndrew Lunn1-30/+1
Now that the AT24 uses the NVMEM framework, replace the memory_accessor in the setup() callback with nvmem API calls. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02eeprom: 93xx46: extend driver to plug into the NVMEM frameworkAndrew Lunn2-27/+95
Add a regmap for accessing the EEPROM, and then use that with the NVMEM framework. Enable backward compatibility in the NVMEM config structure, so that the 'eeprom' file in sys is provided by the framework. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02eeprom: at25: extend driver to plug into the NVMEM frameworkAndrew Lunn2-55/+71
Add a regmap for accessing the EEPROM, and then use that with the NVMEM framework. Enable backwards compatibility in the NVMEM config, so that the 'eeprom' file in sys is provided by the framework. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02eeprom: at25: Remove in kernel API for accessing the EEPROMAndrew Lunn1-26/+0
The setup() callback is not used by any in kernel code. Remove it. Any new code which requires access to the eeprom can use the NVMEM API. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02eeprom: at24: extend driver to plug into the NVMEM frameworkAndrew Lunn2-41/+82
Add a regmap for accessing the EEPROM, and then use that with the NVMEM framework. Set the NVMEM config structure to enable backward, so that the 'eeprom' file in sys is provided by the framework. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02misc: ad525x_dpot: Fix the enabling of the "otpXen" attributesDan Bogdan Nechita1-1/+1
Currently writing the attributes with "echo" will result in comparing: "enabled\n" with "enabled\0" and attribute is always set to false. Use the sysfs_streq() instead because it treats both NUL and new-line-then-NUL as equivalent string terminations. Signed-off-by: Dan Bogdan Nechita <dan.bogdan.nechita@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02drivers/misc/ad525x_dpot: AD5274 fix RDAC read back errorsMichael Hennerich1-1/+1
Fix RDAC read back errors caused by a typo. Value must shift by 2. Fixes: a4bd394956f2 ("drivers/misc/ad525x_dpot.c: new features") Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02mei: me: add broxton pci device idsTomas Winkler2-0/+7
Add device ids for Broxton SoC based devices. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-02Merge tag 'lkdtm-next' of ↵Greg Kroah-Hartman1-3/+119
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-testing Kees writes: Become maintainer, add hardening tests for use-after-free and atomic wrapping.
2016-03-02lkdtm: improve use-after-free testsKees Cook1-4/+15
This improves the order of operations on the use-after-free tests to try to make sure we've executed any available sanity-checking code, and to report the poisoning that was found. Signed-off-by: Kees Cook <keescook@chromium.org>
2016-03-02lkdtm: add test for atomic_t underflow/overflowDavid Windsor1-0/+13
dmesg output of running this LKDTM test with PaX: [187095.475573] lkdtm: No crash points registered, enable through debugfs [187118.020257] lkdtm: Performing direct entry WRAP_ATOMIC [187118.030045] lkdtm: attempting atomic underflow [187118.030929] PAX: refcount overflow detected in: bash:1790, uid/euid: 0/0 [187118.071667] PAX: refcount overflow occured at: lkdtm_do_action+0x19e/0x400 [lkdtm] [187118.081423] CPU: 3 PID: 1790 Comm: bash Not tainted 4.2.6-pax-refcount-split+ #2 [187118.083403] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [187118.102596] task: ffff8800da8de040 ti: ffff8800da8e4000 task.ti: ffff8800da8e4000 [187118.111321] RIP: 0010:[<ffffffffc00fc2fe>] [<ffffffffc00fc2fe>] lkdtm_do_action+0x19e/0x400 [lkdtm] ... [187118.128074] lkdtm: attempting atomic overflow [187118.128080] PAX: refcount overflow detected in: bash:1790, uid/euid: 0/0 [187118.128082] PAX: refcount overflow occured at: lkdtm_do_action+0x1b6/0x400 [lkdtm] [187118.128085] CPU: 3 PID: 1790 Comm: bash Not tainted 4.2.6-pax-refcount-split+ #2 [187118.128086] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [187118.128088] task: ffff8800da8de040 ti: ffff8800da8e4000 task.ti: ffff8800da8e4000 [187118.128092] RIP: 0010:[<ffffffffc00fc316>] [<ffffffffc00fc316>] lkdtm_do_action+0x1b6/0x400 [lkdtm] Signed-off-by: David Windsor <dave@progbits.org> [cleaned up whitespacing, keescook] Signed-off-by: Kees Cook <keescook@chromium.org>
2016-03-02lkdtm: Add read/write after free tests for buddy memoryLaura Abbott1-0/+45
The current tests for read/write after free work on slab allocated memory. Memory straight from the buddy allocator may behave slightly differently and have a different set of parameters to test. Add tests for those cases as well. On a basic x86 boot: # echo WRITE_BUDDY_AFTER_FREE > /sys/kernel/debug/provoke-crash/DIRECT [ 22.291950] lkdtm: Performing direct entry WRITE_BUDDY_AFTER_FREE [ 22.292983] lkdtm: Writing to the buddy page before free [ 22.293950] lkdtm: Attempting bad write to the buddy page after free # echo READ_BUDDY_AFTER_FREE > /sys/kernel/debug/provoke-crash/DIRECT [ 32.375601] lkdtm: Performing direct entry READ_BUDDY_AFTER_FREE [ 32.379896] lkdtm: Value in memory before free: 12345678 [ 32.383854] lkdtm: Attempting to read from freed memory [ 32.389309] lkdtm: Buddy page was not poisoned On x86 with CONFIG_DEBUG_PAGEALLOC and debug_pagealloc=on: # echo WRITE_BUDDY_AFTER_FREE > /sys/kernel/debug/provoke-crash/DIRECT [ 17.475533] lkdtm: Performing direct entry WRITE_BUDDY_AFTER_FREE [ 17.477360] lkdtm: Writing to the buddy page before free [ 17.479089] lkdtm: Attempting bad write to the buddy page after free [ 17.480904] BUG: unable to handle kernel paging request at ffff88000ebd8000 # echo READ_BUDDY_AFTER_FREE > /sys/kernel/debug/provoke-crash/DIRECT [ 14.606433] lkdtm: Performing direct entry READ_BUDDY_AFTER_FREE [ 14.607447] lkdtm: Value in memory before free: 12345678 [ 14.608161] lkdtm: Attempting to read from freed memory [ 14.608860] BUG: unable to handle kernel paging request at ffff88000eba3000 Note that arches without ARCH_SUPPORTS_DEBUG_PAGEALLOC may not produce the same crash. Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-03-02lkdtm: Update WRITE_AFTER_FREE testLaura Abbott1-4/+13
The SLUB allocator may use the first word of a freed block to store the freelist information. This may make it harder to test poisoning features. Change the WRITE_AFTER_FREE test to better match what the READ_AFTER_FREE test does and also print out a big more information. Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-03-02lkdtm: Add READ_AFTER_FREE testLaura Abbott1-0/+38
In a similar manner to WRITE_AFTER_FREE, add a READ_AFTER_FREE test to test free poisoning features. Sample output when no sanitization is present: # echo READ_AFTER_FREE > /sys/kernel/debug/provoke-crash/DIRECT [ 17.542473] lkdtm: Performing direct entry READ_AFTER_FREE [ 17.543866] lkdtm: Value in memory before free: 12345678 [ 17.545212] lkdtm: Attempting bad read from freed memory [ 17.546542] lkdtm: Memory was not poisoned with slub_debug=P: # echo READ_AFTER_FREE > /sys/kernel/debug/provoke-crash/DIRECT [ 22.415531] lkdtm: Performing direct entry READ_AFTER_FREE [ 22.416366] lkdtm: Value in memory before free: 12345678 [ 22.417137] lkdtm: Attempting bad read from freed memory [ 22.417897] lkdtm: Memory correctly poisoned, calling BUG Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Kees Cook <keescook@chromium.org>