summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/onenand
AgeCommit message (Collapse)AuthorFilesLines
2023-08-28Merge tag 'nand/for-6.6' into mtd/nextMiquel Raynal2-14/+5
Raw NAND core changes: * Fix -Wvoid-pointer-to-enum-cast warning * Export 'nand_exit_status_op()' * dt-bindings: Fix nand-controller.yaml license Raw NAND controller driver changes: * Omap, Omap2, Samsung, Atmel, fsl_upm, lpc32xx_slc, lpc32xx_mlc, STM32_FMC2, sh_ftlctl, MXC, Sunxi: - Use devm_platform_get_and_ioremap_resource() * Orion, vf610_nfc, Sunxi, STM32_FMC2, MTK, mpc5121, lpc32xx_slc, Intel, FSMC, Arasan: - Use helper function devm_clk_get_optional_enabled() * Brcmnand: - Use devm_platform_ioremap_resource_byname() - Propagate init error -EPROBE_DEFER up - Propagate error and simplify ternary operators - Fix mtd oobsize - Fix potential out-of-bounds access in oob write - Fix crash during the panic_write - Fix potential false time out warning - Fix ECC level field setting for v7.2 controller * fsmc: Handle clk prepare error in fsmc_nand_resume() * Marvell: Add support for AC5 SoC * Meson: - Support for 512B ECC step size - Fix build error - Use NAND core API to check status - dt-bindings: * Make ECC properties dependent * Support for 512B ECC step size * Drop unneeded quotes * Oxnas: Remove driver and bindings * Qcom: - Conversion to ->exec_op() - Removal of the legacy interface - Two full series of improvements/misc fixes * Use the BIT() macro * Use u8 instead of uint8_t * Fix alignment with open parenthesis * Fix the spacing * Fix wrong indentation * Fix a typo * Early structure initialization * Fix address parsing within ->exec_op() * Remove superfluous initialization of "ret" * Rename variables in qcom_op_cmd_mapping() * Handle unsupported opcode in qcom_op_cmd_mapping() * Fix the opcode check in qcom_check_op() * Use EOPNOTSUPP instead of ENOTSUPP * Wrap qcom_nand_exec_op() to 80 columns * Unmap sg_list and free desc within submic_descs() * Simplify the call to nand_prog_page_end_op() * Do not override the error no of submit_descs() * Sort includes alphabetically * Clear buf_count and buf_start in raw read * Add read/read_start ops in exec_op path * vf610_nfc: Do not check 0 for platform_get_irq() SPI-NAND changes: * gigadevice: Add support for GD5F1GQ{4,5}RExxH * esmt: Add support for F50D2G41KA * toshiba: Add support for T{C,H}58NYG{0,2}S3HBAI4 and TH58NYG3S0HBAI6 Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2023-07-27mtd: Explicitly include correct DT includesRob Herring1-1/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230714174751.4060439-1-robh@kernel.org
2023-07-15mtd: nand: omap: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-8/+2
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230713104422.29222-1-frank.li@vivo.com
2023-07-12mtd: nand: samsung: Convert to devm_platform_ioremap_resource() and ↵Yangtao Li1-6/+3
devm_platform_get_and_ioremap_resource() Use devm_platform_ioremap_resource() and devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230707040622.78174-11-frank.li@vivo.com
2023-04-11mtd: nand: Convert to platform remove callback returning voidUwe Kleine-König3-12/+6
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # atmel Reviewed-by: Paul Cercueil <paul@crapouillou.net> # ingenic Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> # ingenic Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # intel Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # meson Acked-by: Roger Quadros <rogerq@kernel.org> # omap_elm Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas Reviewed-by: Heiko Stuebner <heiko@sntech.de> # rockchip Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sunxi Acked-by: Thierry Reding <treding@nvidia.com> # tegra Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230411113816.3472237-1-u.kleine-koenig@pengutronix.de
2023-04-11mtd: onenand: omap2: Drop obsolete dependency on COMPILE_TESTJean Delvare1-1/+1
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230407190453.66efdf9d@endymion.delvare
2022-11-07mtd: onenand: omap2: add dependency on GPMCKrzysztof Kozlowski1-0/+1
OMAP2 OneNAND driver uses gpmc_omap_onenand_set_timings() provided by OMAP_GPMC driver, so the latter cannot be module if OneNAND driver is built-in: /usr/bin/arm-linux-gnueabi-ld: drivers/mtd/nand/onenand/onenand_omap2.o: in function `omap2_onenand_probe': onenand_omap2.c:(.text+0x520): undefined reference to `gpmc_omap_onenand_set_timings' The OMAP_GPMC is also a runtime dependency. Reported-by: kernel test robot <lkp@intel.com> Fixes: 854fd9209b20 ("memory: omap-gpmc: Allow building as a module") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20221107091520.127053-1-krzysztof.kozlowski@linaro.org
2022-09-21mtd: add ECC error accounting for each read requestMichał Kępień1-0/+12
Extend struct mtd_req_stats with two new fields holding the number of corrected bitflips and uncorrectable errors detected during a read operation. This is a prerequisite for ultimately passing those counters to user space, where they can be useful to applications for making better-informed choices about moving data around. Unlike 'max_bitflips' (which is set - in a common code path - to the return value of a function called while the MTD device's mutex is held), these counters have to be maintained in each MTD driver which defines the '_read_oob' callback because the statistics need to be calculated while the MTD device's mutex is held. Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220629125737.14418-4-kernel@kempniu.pl
2022-09-21mtd: always initialize 'stats' in struct mtd_oob_opsMichał Kępień2-3/+3
As the 'stats' field in struct mtd_oob_ops is used in conditional expressions, ensure it is always zero-initialized in all such structures to prevent random stack garbage from being interpreted as a pointer. Strictly speaking, this problem currently only needs to be fixed for struct mtd_oob_ops structures subsequently passed to mtd_read_oob(). However, this commit goes a step further and makes all instances of struct mtd_oob_ops in the tree zero-initialized, in hope of preventing future problems, e.g. if struct mtd_req_stats gets extended with write statistics at some point. Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220629125737.14418-3-kernel@kempniu.pl
2022-01-23mtd: onenand: Check for error irqJiasheng Jiang1-1/+6
For the possible failure of the platform_get_irq(), the returned irq could be error number and will finally cause the failure of the request_irq(). Consider that platform_get_irq() can now in certain cases return -EPROBE_DEFER, and the consequences of letting request_irq() effectively convert that into -EINVAL, even at probe time rather than later on. So it might be better to check just now. Fixes: 2c22120fbd01 ("MTD: OneNAND: interrupt based wait support") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220104162658.1988142-1-jiasheng@iscas.ac.cn
2021-12-09mtd: onenand: remove redundant variable ooblenColin Ian King1-2/+2
Variable ooblen is being initialized with a value that is never read. The variable is never used after this, so it is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211205230729.79337-1-colin.i.king@gmail.com
2021-09-29mtd: onenand: samsung: drop Exynos4 and describe driver in KConfigKrzysztof Kozlowski1-4/+5
None of supported Samsung Exynos4 SoCs (Exynos4210, Exynos4412) seem to use OneNAND driver so drop it. Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210924133223.111930-1-krzysztof.kozlowski@canonical.com
2021-04-16mtd: core: Constify buf in mtd_write_user_prot_reg()Tudor Ambarus1-2/+3
The write buffer comes from user and should be const. Constify write buffer in mtd core and across all _write_user_prot_reg() users. cfi_cmdset_{0001, 0002} and onenand_base will pay the cost of an explicit cast to discard the const qualifier since the beginning, since they are using an otp_op_t function prototype that is used for both reads and writes. mtd_dataflash and SPI NOR will benefit of the const buffer because they are using different paths for writes and reads. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210403060931.7119-1-tudor.ambarus@microchip.com
2021-03-11mtd: onenand: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210305082356.GA137489@embeddedor
2020-12-16Merge tags 'spi-nor/for-5.11' and 'nand/for-5.11' into mtd/nextMiquel Raynal1-8/+8
SPI NOR core changes: - Initial support for stateful Octal DTR mode using volatile settings - Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards - Support for Cypress Semper flash - Support to specify ECC block size of SPI NOR flashes - Fixes to avoid clearing of non-volatile Block Protection bits at probe Generic NAND core: * ECC management: - Add an I/O request tweaking mechanism - Entire rework of the software BCH ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, migration to more generic prototypes, misc fixes and style cleanup. Moved now to the Generic NAND layer. - Entire rework of the software Hamming ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, misc renames, comment updates, cleanup, and style fixes. Moved now to the generic NAND layer. - Necessary plumbing at the NAND level to retrieve generic NAND ECC engines (softwares and on-die). - Update of the bindings. Raw NAND core: * Geting rid of the chip->ecc.priv entry. * Fix miscellaneous typos in kernel-doc Raw NAND controller drivers: * AU1550: Ensure the presence of the right includes * Davinci: Do not use extra dereferencing * GPMI: - Fix the driver only sense CS0 R/B issue - Fix the random DMA timeout issue - Use a single line for of_device_id - Use of_device_get_match_data() - Fix reference count leak in gpmi ops - Cleanup makefile - Fix binding matching of clocks on different SoCs * Ingenic: remove redundant get_device() in ingenic_ecc_get() * Intel LGM: New NAND controller driver * Marvell: Drop useless line * Meson: - Fix a resource leak in init - Fix meson_nfc_dma_buffer_release() arguments * mxc: - Use device_get_match_data() - Use a single line for of_device_id - Remove platform data support * Qcom: - Add support for SDX55 - Support for IPQ6018 QPIC NAND controller - Fix DMA sync on FLASH_STATUS register read * Rockchip: New NAND controller driver for RK3308, RK2928 and others * Sunxi: Add MDMA support SPI-NAND core: * Creation of a SPI-NAND on-die ECC engine * Move ECC related definitions earlier in the driver * Fix typo in comment * Fill a default ECC provider/algorithm * Remove outdated comment * Fix OOB read * Allow the case where there is no ECC engine * Use the external ECC engine logic SPI-NAND chip drivers: * Micron: - Add support for MT29F2G01AAAED - Use more specific names * Macronix: - Add support for MX35LFxG24AD - Add support for MX35LFxGE4AD Others: * onenand: Use mtd->oops_panic_write as condition * plat-ram: correctly free memory on error path in platram_probe()
2020-12-11mtd: onenand: Use mtd->oops_panic_write as conditionThomas Gleixner1-8/+8
struct mtd_info has a flag oops_panic_write which is set when the write operation is issued via the panic_write() callback. That allows controller drivers to distinguish the panic write from a regular write. Replace the open coded 'in_interrupt() | oops_in_progress' checks with a check for that flag. in_interrupt() is an unrealiable indicator anyway as it covers all sorts of atomic contexts not only hard and soft interrupt service routines. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: Richard Weinberger <richard@nod.at> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: linux-mtd@lists.infradead.org Cc: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201113141422.2214771-1-bigeasy@linutronix.de
2020-11-20mtd: onenand: Fix some kernel-doc misdemeanoursLee Jones1-21/+15
Fixes the following W=1 kernel build warning(s): drivers/mtd/nand/onenand/onenand_base.c:140: warning: Function parameter or member 'mtd' not described in 'onenand_ooblayout_32_64_ecc' drivers/mtd/nand/onenand/onenand_base.c:140: warning: Function parameter or member 'section' not described in 'onenand_ooblayout_32_64_ecc' drivers/mtd/nand/onenand/onenand_base.c:140: warning: Function parameter or member 'oobregion' not described in 'onenand_ooblayout_32_64_ecc' drivers/mtd/nand/onenand/onenand_base.c:1436: warning: bad line: drivers/mtd/nand/onenand/onenand_base.c:1971: warning: Function parameter or member 'ops' not described in 'onenand_write_oob_nolock' drivers/mtd/nand/onenand/onenand_base.c:1971: warning: Excess function parameter 'len' description in 'onenand_write_oob_nolock' drivers/mtd/nand/onenand/onenand_base.c:1971: warning: Excess function parameter 'retlen' description in 'onenand_write_oob_nolock' drivers/mtd/nand/onenand/onenand_base.c:1971: warning: Excess function parameter 'buf' description in 'onenand_write_oob_nolock' drivers/mtd/nand/onenand/onenand_base.c:1971: warning: Excess function parameter 'mode' description in 'onenand_write_oob_nolock' drivers/mtd/nand/onenand/onenand_base.c:2156: warning: Function parameter or member 'block_size' not described in 'onenand_multiblock_erase' drivers/mtd/nand/onenand/onenand_base.c:2156: warning: Excess function parameter 'region' description in 'onenand_multiblock_erase' drivers/mtd/nand/onenand/onenand_base.c:2771: warning: Function parameter or member 'ops' not described in 'onenand_otp_write_oob_nolock' drivers/mtd/nand/onenand/onenand_base.c:2771: warning: Excess function parameter 'len' description in 'onenand_otp_write_oob_nolock' drivers/mtd/nand/onenand/onenand_base.c:2771: warning: Excess function parameter 'retlen' description in 'onenand_otp_write_oob_nolock' drivers/mtd/nand/onenand/onenand_base.c:2771: warning: Excess function parameter 'buf' description in 'onenand_otp_write_oob_nolock' drivers/mtd/nand/onenand/onenand_base.c:3387: warning: Function parameter or member 'mtd' not described in 'flexonenand_get_boundary' drivers/mtd/nand/onenand/onenand_base.c:3387: warning: Excess function parameter 'onenand_info' description in 'flexonenand_get_boundary' drivers/mtd/nand/onenand/onenand_base.c:3509: warning: Function parameter or member 'mtd' not described in 'flexonenand_check_blocks_erased' drivers/mtd/nand/onenand/onenand_base.c:3509: warning: Excess function parameter 'mtd_info' description in 'flexonenand_check_blocks_erased' drivers/mtd/nand/onenand/onenand_base.c:3557: warning: Function parameter or member 'die' not described in 'flexonenand_set_boundary' drivers/mtd/nand/onenand/onenand_base.c:3557: warning: Function parameter or member 'boundary' not described in 'flexonenand_set_boundary' drivers/mtd/nand/onenand/onenand_base.c:3557: warning: Function parameter or member 'lock' not described in 'flexonenand_set_boundary' Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-23-lee.jones@linaro.org
2020-11-20mtd: onenand: onenand_bbt: Fix expected kernel-doc formattingLee Jones1-16/+16
Fixes the following W=1 kernel build warning(s): drivers/mtd/nand/onenand/onenand_bbt.c:33: warning: Function parameter or member 'buf' not described in 'check_short_pattern' drivers/mtd/nand/onenand/onenand_bbt.c:33: warning: Function parameter or member 'len' not described in 'check_short_pattern' drivers/mtd/nand/onenand/onenand_bbt.c:33: warning: Function parameter or member 'paglen' not described in 'check_short_pattern' drivers/mtd/nand/onenand/onenand_bbt.c:33: warning: Function parameter or member 'td' not described in 'check_short_pattern' drivers/mtd/nand/onenand/onenand_bbt.c:57: warning: Function parameter or member 'mtd' not described in 'create_bbt' drivers/mtd/nand/onenand/onenand_bbt.c:57: warning: Function parameter or member 'buf' not described in 'create_bbt' drivers/mtd/nand/onenand/onenand_bbt.c:57: warning: Function parameter or member 'bd' not described in 'create_bbt' drivers/mtd/nand/onenand/onenand_bbt.c:57: warning: Function parameter or member 'chip' not described in 'create_bbt' drivers/mtd/nand/onenand/onenand_bbt.c:132: warning: Function parameter or member 'mtd' not described in 'onenand_memory_bbt' drivers/mtd/nand/onenand/onenand_bbt.c:132: warning: Function parameter or member 'bd' not described in 'onenand_memory_bbt' drivers/mtd/nand/onenand/onenand_bbt.c:145: warning: Function parameter or member 'mtd' not described in 'onenand_isbad_bbt' drivers/mtd/nand/onenand/onenand_bbt.c:145: warning: Function parameter or member 'offs' not described in 'onenand_isbad_bbt' drivers/mtd/nand/onenand/onenand_bbt.c:145: warning: Function parameter or member 'allowbbt' not described in 'onenand_isbad_bbt' drivers/mtd/nand/onenand/onenand_bbt.c:182: warning: Function parameter or member 'mtd' not described in 'onenand_scan_bbt' drivers/mtd/nand/onenand/onenand_bbt.c:182: warning: Function parameter or member 'bd' not described in 'onenand_scan_bbt' drivers/mtd/nand/onenand/onenand_bbt.c:230: warning: Function parameter or member 'mtd' not described in 'onenand_default_bbt' Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-7-lee.jones@linaro.org
2020-11-20mtd: onenand: onenand_base: Fix expected kernel-doc formattingLee Jones1-219/+219
Fixes the following W=1 kernel build warning(s): drivers/mtd/nand/onenand/onenand_base.c:140: warning: Function parameter or member 'mtd' not described in 'onenand_ooblayout_32_64_ecc' drivers/mtd/nand/onenand/onenand_base.c:140: warning: Function parameter or member 'section' not described in 'onenand_ooblayout_32_64_ecc' drivers/mtd/nand/onenand/onenand_base.c:140: warning: Function parameter or member 'oobregion' not described in 'onenand_ooblayout_32_64_ecc' drivers/mtd/nand/onenand/onenand_base.c:200: warning: Function parameter or member 'addr' not described in 'onenand_readw' drivers/mtd/nand/onenand/onenand_base.c:212: warning: Function parameter or member 'value' not described in 'onenand_writew' drivers/mtd/nand/onenand/onenand_base.c:212: warning: Function parameter or member 'addr' not described in 'onenand_writew' drivers/mtd/nand/onenand/onenand_base.c:225: warning: Function parameter or member 'this' not described in 'onenand_block_address' drivers/mtd/nand/onenand/onenand_base.c:225: warning: Function parameter or member 'block' not described in 'onenand_block_address' drivers/mtd/nand/onenand/onenand_base.c:242: warning: Function parameter or member 'this' not described in 'onenand_bufferram_address' drivers/mtd/nand/onenand/onenand_base.c:242: warning: Function parameter or member 'block' not described in 'onenand_bufferram_address' NB: Snipped 200 lines for brevity. Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Adrian Hunter <ext-adrian.hunter@nokia.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-4-lee.jones@linaro.org
2020-09-30mtd: onenand: simplify the return expression of onenand_transfer_auto_oobLiu Shixin1-7/+2
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200921082441.2591669-1-liushixin2@huawei.com
2020-09-30mtd: onenand: Simplify with dev_err_probe()Krzysztof Kozlowski1-4/+1
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-1-krzk@kernel.org
2020-06-26mtd: nand: Drop useless 'depends on' in KconfigMiquel Raynal1-1/+0
Both OneNAND and raw NAND bits can't be compiled if MTD is disabled because of the if/endif logic in drivers/mtd/Kconfig. There is no need for an extra "depends on MTD" in their respective Kconfig files. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200529002517.3546-12-miquel.raynal@bootlin.com
2020-03-30mtd: Convert fallthrough comments into statementsMiquel Raynal1-1/+1
Use Joe Perches cvt_fallthrough.pl script to convert /* fallthrough */ comments (and its derivatives) into a fallthrough; statement. This automatically drops useless ones. Do it MTD-wide. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/linux-mtd/20200325212115.14170-1-miquel.raynal@bootlin.com
2020-01-21mtd: onenand: Rename omap2 driver to avoid a build warningMiquel Raynal2-1/+1
As previously reported by Sudip Mukherjee for the Samsung driver, the omap2 onenand driver is called omap2.c in our directory and omap2.c in the tty/serial/ directory. If both drivers are compiled as modules, it would produce the following warning: warning: same module names found: drivers/tty/serial/omap2.ko drivers/mtd/nand/onenand/omap2.ko Rename the onenand omap2 driver so that it fits the folder's convention: onenand_omap2.c. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand: Use a better name for samsung driverMiquel Raynal2-1/+1
Commit 55ed51fff224 ("{tty: serial, nand: onenand}: samsung: rename to fix build warning") has changed the samsung.c driver to be samsung_mtd.c in order to avoid a conflict in module names with the tty driver. Since the *_mtd suffix is very undescriptive, rename it to onenand_samsung.c, following the folder's convention. Same will be applied to the omap2 onenand driver. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand: Enable compile testing of OMAP and Samsung driversKrzysztof Kozlowski1-2/+2
OMAP and Samsung OneNAND drivers can be compile tested. The OMAP drivers still depends on mach header so limit the compile testing to ARMv7. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand: samsung: Fix printing format for size_t on 64-bitKrzysztof Kozlowski1-1/+1
Print size_t as %zu to fix -Wformat warnings when compiling on 64-bit platform (e.g. with COMPILE_TEST): drivers/mtd/nand/onenand/samsung_mtd.c: In function ‘s5pc110_read_bufferram’: drivers/mtd/nand/onenand/samsung_mtd.c:661:16: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t {aka long unsigned int}’ [-Wformat=] dev_err(dev, "Couldn't map a %d byte buffer for DMA\n", count); Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand: samsung: Fix pointer cast -Wpointer-to-int-cast warnings on 64 bitKrzysztof Kozlowski1-2/+2
iomem pointers should be casted to unsigned long to avoid -Wpointer-to-int-cast warnings when compiling on 64-bit platform (e.g. with COMPILE_TEST): drivers/mtd/nand/onenand/samsung_mtd.c: In function ‘s3c_onenand_readw’: drivers/mtd/nand/onenand/samsung_mtd.c:251:6: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] if ((unsigned int) addr < ONENAND_DATARAM && onenand->bootram_command) { ^ Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand_base: Adjust indentation in onenand_read_ops_nolockNathan Chancellor1-41/+41
Clang warns: ../drivers/mtd/nand/onenand/onenand_base.c:1269:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] while (!ret) { ^ ../drivers/mtd/nand/onenand/onenand_base.c:1266:2: note: previous statement is here if (column + thislen > writesize) ^ 1 warning generated. This warning occurs because there is a space before the tab of the while loop. There are spaces at the beginning of a lot of the lines in this block, remove them so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: a8de85d55700 ("[MTD] OneNAND: Implement read-while-load") Link: https://github.com/ClangBuiltLinux/linux/issues/794 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand: samsung: remove set but not used variableChen Wandun1-2/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/mtd/nand/onenand/samsung_mtd.c: In function s3c_onenand_check_lock_status: drivers/mtd/nand/onenand/samsung_mtd.c:731:6: warning: variable tmp set but not used [-Wunused-but-set-variable] Signed-off-by: Chen Wandun <chenwandun@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand: Fix Kconfig indentationKrzysztof Kozlowski1-6/+6
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-09mtd: onenand: omap2: Pass correct flags for prep_dma_memcpyPeter Ujfalusi1-1/+2
The commit converting the driver to DMAengine was missing the flags for the memcpy prepare call. It went unnoticed since the omap-dma driver was ignoring them. Fixes: 3ed6a4d1de2c5 (" mtd: onenand: omap2: Convert to use dmaengine for memcp") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-09mtd: onenand: samsung: Fix iomem access with regular memcpyKrzysztof Kozlowski1-4/+4
The __iomem memory should be copied with memcpy_fromio. This fixes Sparse warnings like: drivers/mtd/nand/onenand/samsung_mtd.c:678:40: warning: incorrect type in argument 2 (different address spaces) drivers/mtd/nand/onenand/samsung_mtd.c:678:40: expected void const *from drivers/mtd/nand/onenand/samsung_mtd.c:678:40: got void [noderef] <asn:2> *[assigned] p drivers/mtd/nand/onenand/samsung_mtd.c:679:19: warning: incorrect type in assignment (different address spaces) drivers/mtd/nand/onenand/samsung_mtd.c:679:19: expected void [noderef] <asn:2> *[assigned] p drivers/mtd/nand/onenand/samsung_mtd.c:679:19: got unsigned char * Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-09mtd: onenand: omap2: Fix errors in styleAmir Mahdi Ghorbanian2-12/+13
Correct mispelling, spacing, and coding style flaws caught by checkpatch.pl script in the Omap2 Onenand driver . Signed-off-by: Amir Mahdi Ghorbanian <indigoomega021@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-11-18{tty: serial, nand: onenand}: samsung: rename to fix build warningSudip Mukherjee2-1/+1
Any arm config which has 'CONFIG_MTD_ONENAND_SAMSUNG=m' and 'CONFIG_SERIAL_SAMSUNG=m' gives a build warning: warning: same module names found: drivers/tty/serial/samsung.ko drivers/mtd/nand/onenand/samsung.ko Rename both drivers/tty/serial/samsung.c to drivers/tty/serial/samsung_tty.c and drivers/mtd/nand/onenand/samsung.c drivers/mtd/nand/onenand/samsung_mtd.c to fix the warning. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/r/20191117202435.28127-1-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-16Merge tag 'nand/for-5.4' of ↵Richard Weinberger1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/for-5.4 NAND core * Fixing typos * Adding missing of_node_put() in various drivers Raw NAND controller drivers: * Macronix: new controller driver * Omap2: Fixing the number of bitflips returned * Brcmnand: Fix a pointer not iterating over all the page chunks * W90x900: Driver removed * Onenand: Fix a memory leak * Sharpsl: Missing include guard * STM32: Avoid warnings when building with W=1 * Ingenic: Fix a coccinelle warning * r852: Call a helper to simplify the code
2019-08-24mtd: onenand_base: Fix a memory leak bugWenwen Wang1-0/+3
In onenand_scan(), if CONFIG_MTD_ONENAND_VERIFY_WRITE is defined, 'this->verify_buf' is allocated through kzalloc(). However, it is not deallocated in the following execution, if the allocation for 'this->oob_buf' fails, leading to a memory leak bug. To fix this issue, free 'this->verify_buf' before returning the error. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-26mtd: onenand_base: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/mtd/nand/onenand/onenand_base.c: In function ‘onenand_check_features’: drivers/mtd/nand/onenand/onenand_base.c:3264:17: warning: this statement may fall through [-Wimplicit-fallthrough=] this->options |= ONENAND_HAS_NOP_1; drivers/mtd/nand/onenand/onenand_base.c:3265:2: note: here case ONENAND_DEVICE_DENSITY_4Gb: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Cc: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-07-14Merge tag 'mtd/for-5.3' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ...
2019-06-27mtd: onenand: Avoid fall-through warningsGustavo A. R. Silva1-0/+3
NOTICE THAT: "...we don't know whether we need fallthroughs or breaks here and this is just a change to avoid having new warnings when switching to -Wimplicit-fallthrough but this change might be entirely wrong."[1] See the original thread of discussion here: https://lore.kernel.org/patchwork/patch/1036251/ So, in preparation to enabling -Wimplicit-fallthrough, this patch silences the following warnings: drivers/mtd/nand/onenand/onenand_base.c: In function ‘onenand_check_features’: drivers/mtd/nand/onenand/onenand_base.c:3264:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (ONENAND_IS_DDP(this)) ^ drivers/mtd/nand/onenand/onenand_base.c:3284:2: note: here case ONENAND_DEVICE_DENSITY_2Gb: ^~~~ drivers/mtd/nand/onenand/onenand_base.c:3288:17: warning: this statement may fall through [-Wimplicit-fallthrough=] this->options |= ONENAND_HAS_UNLOCK_ALL; drivers/mtd/nand/onenand/onenand_base.c:3290:2: note: here case ONENAND_DEVICE_DENSITY_1Gb: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Also, notice that this patch doesn't change any functionality. See the most recent thread of discussion here: https://lore.kernel.org/patchwork/patch/1077395/ This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. [1] https://lore.kernel.org/lkml/20190509085318.34a9d4be@xps13/ Cc: Miquel Raynal <miquel.raynal@bootlin.com> Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: onenand: Add support for 8Gb datasize onenandJonathan Bakker1-0/+2
Used in several S5PV210-based Galaxy S devices, among them SGH-T959V, SGH-T959P, SGH-T839, and SPH-D700. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner4-16/+4
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 326Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program see the file copying if not write to the free software foundation 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 9 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000435.832876118@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-18mtd: onenand: Store bad block marker position in chip structFrieder Schrempf2-4/+4
The information about where the manufacturer puts the bad block markers inside the bad block and in the OOB data is stored in different places. Let's move this information to the chip struct, as we did it for rawnand. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-20mtd: onenand: use mtd_device_register() where applicableRafał Miłecki2-6/+4
If driver doesn't specify parsers it can use that little helper. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-2/+4
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-08Merge tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtdLinus Torvalds1-4/+2
Pull MTD updates from Boris Brezillon: "Core changes: - Add a sysfs attribute to expose available OOB size Driver changes: - Remove HAS_DMA dependency on various drivers - Use dev_get_drvdata() instead of platform_get_drvdata() in docg3 - Replace msleep by usleep_range() in the dataflash driver - Avoid VLA usage in nftl layers - Remove useless .owner assignment in pismo - Fix various issues in the CFI driver - Improve TRX partition handling expose a DT compat for this part parser - Clarify OFFSET_CONTINUOUS meaning NAND core changes: - Add Miquel as a NAND maintainer - Add access mode to the nand_page_io_req struct - Fix kernel-doc in rawnand.h - Support bit-wise majority to recover from corrupted ONFI parameter pages - Stop checking FAIL bit after a SET_FEATURES, as documented in the ONFI spec Raw NAND Driver changes: - Fix and cleanup the error path of many NAND controller drivers - GPMI: + Cleanup/simplification of a few aspects in the driver + Take ECC setup specified in the DT into account - sunxi: remove support for GPIO-based R/B polling - MTK: + Use of_device_get_match_data() instead of of_match_device() + Add an entry in MAINTAINERS for this driver + Fix nand-ecc-step-size and nand-ecc-strength description in the DT bindings doc - fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page OneNAND driver changes: - samsung: use dev_get_drvdata() instead of platform_get_drvdata() SPI NOR core changes: - Add support for a bunch of SPI NOR chips - Clear EAR reg when switching to 3-byte addressing mode on Winbond chips SPI NOR controller driver changes: - cadence: Add DMA support for direct mode reads - hisi: Prefix a few functions with hisi_ - intel: + Mark the driver as "dangerous" in Kconfig + Fix atomic sequence handling + Pass a 40us delay (instead of 0us) to readl_poll_timeout() - fsl: + fix a typo in a function name + add support for IP variants embedded in the ls2080a and ls1080a SoCs - stm32: request exclusive control of the reset line" * tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd: (66 commits) mtd: nand: Pass mode information to nand_page_io_req mtd: cfi_cmdset_0002: Change erase one block to enable XIP once mtd: cfi_cmdset_0002: Change erase functions to check chip good only mtd: cfi_cmdset_0002: Change erase functions to retry for error mtd: cfi_cmdset_0002: Change definition naming to retry write operation mtd: cfi_cmdset_0002: Change write buffer to check correct value mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS mtd: bcm47xxpart: add of_match_table with a new DT binding dt-bindings: mtd: document Broadcom's BCM47xx partitions mtd: spi-nor: Add support for EN25QH32 mtd: spi-nor: Add support for is25wp series chips mtd: spi-nor: Add Winbond w25q32jv support mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080a mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset control mtd: spi-nor: intel: provide a range for poll_timout mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_read mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in Kconfig mtd: spi-nor: intel-spi: Fix atomic sequence handling mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op mtd: rawnand: use bit-wise majority to recover the ONFI param page ...
2018-05-02mtd: onenand: omap2: Disable DMA for HIGHMEM buffersLadislav Michl1-67/+38
dma_map_single does not work for vmalloc-ed buffers, so disable DMA in this case. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reported-by: "H. Nikolaus Schaller" <hns@goldelico.com> Tested-by: "H. Nikolaus Schaller" <hns@goldelico.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-04-29mtd: onenand: simplify getting .drvdataWolfram Sang1-4/+2
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-13 20:13:58 +0300