summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)AuthorFilesLines
2020-02-04treewide: remove redundant IS_ERR() before error code checkMasahiro Yamada1-1/+1
'PTR_ERR(p) == -E*' is a stronger condition than IS_ERR(p). Hence, IS_ERR(p) is unneeded. The semantic patch that generates this commit is as follows: // <smpl> @@ expression ptr; constant error_code; @@ -IS_ERR(ptr) && (PTR_ERR(ptr) == - error_code) +PTR_ERR(ptr) == - error_code // </smpl> Link: http://lkml.kernel.org/r/20200106045833.1725-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Stephen Boyd <sboyd@kernel.org> [drivers/clk/clk.c] Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [GPIO] Acked-by: Wolfram Sang <wsa@the-dreams.de> [drivers/i2c] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi/scan.c] Acked-by: Rob Herring <robh@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31Merge tag 'mtd/for-5.6' of ↵Linus Torvalds24-151/+274
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD core - block2mtd: page index should use pgoff_t - maps: physmap: minimal Runtime PM support - maps: pcmciamtd: avoid possible sleep-in-atomic-context bugs - concat: Fix a comment referring to an unknown symbol Raw NAND: - Macronix: Use match_string() helper - Atmel: switch to using devm_fwnode_gpiod_get() - Denali: rework the SKIP_BYTES feature and add reset controlling - Brcmnand: set appropriate DMA mask - Cadence: add unspecified HAS_IOMEM dependency - Various cleanup. Onenand: - Rename Samsung and Omap2 drivers to avoid possible build warnings - Enable compile testing - Various build issues - Kconfig cleanup SPI-NAND: - Support for Toshiba TC58CVG2S0HRAIJ SPI-NOR: - Add support for TB selection using SR bit 6, - Add support for few flashes" * tag 'mtd/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (41 commits) mtd: concat: Fix a comment referring to an unknown symbol mtd: rawnand: add unspecified HAS_IOMEM dependency mtd: block2mtd: page index should use pgoff_t mtd: maps: physmap: Add minimal Runtime PM support mtd: maps: pcmciamtd: fix possible sleep-in-atomic-context bugs in pcmciamtd_set_vpp() mtd: onenand: Rename omap2 driver to avoid a build warning mtd: onenand: Use a better name for samsung driver mtd: rawnand: atmel: switch to using devm_fwnode_gpiod_get() mtd: spinand: add support for Toshiba TC58CVG2S0HRAIJ mtd: rawnand: macronix: Use match_string() helper to simplify the code mtd: sharpslpart: Fix unsigned comparison to zero mtd: onenand: Enable compile testing of OMAP and Samsung drivers mtd: onenand: samsung: Fix printing format for size_t on 64-bit mtd: onenand: samsung: Fix pointer cast -Wpointer-to-int-cast warnings on 64 bit mtd: rawnand: denali: remove hard-coded DENALI_DEFAULT_OOB_SKIP_BYTES mtd: rawnand: denali_dt: add reset controlling dt-bindings: mtd: denali_dt: document reset property mtd: rawnand: denali_dt: Add support for configuring SPARE_AREA_SKIP_BYTES mtd: rawnand: denali_dt: error out if platform has no associated data mtd: rawnand: brcmnand: Set appropriate DMA mask ...
2020-01-31Merge tag 'upstream-5.6-rc1' of ↵Linus Torvalds6-24/+44
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI/UBIFS updates from Miquel Raynal: "This pull request contains mostly fixes for UBI and UBIFS: UBI: - Fixes for memory leaks in error paths - Fix for an logic error in a fastmap selfcheck UBIFS: - Fix for FS_IOC_SETFLAGS related to fscrypt flag - Support for FS_ENCRYPT_FL - Fix for a dead lock in bulk-read mode" Sent on behalf of Richard Weinberger who is traveling. * tag 'upstream-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: Fix an error pointer dereference in error handling code ubifs: Fix memory leak from c->sup_node ubifs: Fix ino_t format warnings in orphan_delete() ubifs: Fix deadlock in concurrent bulk-read and writepage ubifs: Fix wrong memory allocation ubi: Free the normal volumes in error paths of ubi_attach_mtd_dev() ubi: Check the presence of volume before call ubi_fastmap_destroy_checkmap() ubifs: Add support for FS_ENCRYPT_FL ubifs: Fix FS_IOC_SETFLAGS unexpectedly clearing encrypt flag ubi: wl: Remove set but not used variable 'prev_e' ubi: fastmap: Fix inverted logic in seen selfcheck
2020-01-28Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds16-28/+28
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-27Merge tag 'nand/for-5.6' into mtd/nextMiquel Raynal17-115/+212
Raw NAND * Macronix: Use match_string() helper * Atmel: switch to using devm_fwnode_gpiod_get() * Denali: rework the SKIP_BYTES feature and add reset controlling * Brcmnand: set appropriate DMA mask * Various cleanup. Onenand drivers * Rename Samsung and Omap2 drivers to avoid possible build warnings * Enable compile testing * Various build issues * Kconfig cleanup SPI-NAND * Support for Toshiba TC58CVG2S0HRAIJ
2020-01-27Merge tag 'spi-nor/for-5.6' into mtd/nextMiquel Raynal6-45/+102
SPI NOR core changes: - Add support for TB selection using SR bit 6, - Add support for few flashes.
2020-01-27mtd: concat: Fix a comment referring to an unknown symbolMiquel Raynal1-4/+1
Fix the comment describing what the mtd_concat_destroy() function does. It referrers to the concat_mtd_devs symbol which has never existed (at least not since the beginning of the Git era). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-27mtd: rawnand: add unspecified HAS_IOMEM dependencyBrendan Higgins1-1/+1
Currently CONFIG_MTD_NAND_CADENCE implicitly depends on CONFIG_HAS_IOMEM=y; consequently, on architectures without IOMEM we get the following build error: ld: drivers/mtd/nand/raw/cadence-nand-controller.o: in function `cadence_nand_dt_probe.cold.31': drivers/mtd/nand/raw/cadence-nand-controller.c:2969: undefined reference to `devm_platform_ioremap_resource' ld: drivers/mtd/nand/raw/cadence-nand-controller.c:2977: undefined reference to `devm_ioremap_resource' Fix the build error by adding the unspecified dependency. Reported-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-27mtd: block2mtd: page index should use pgoff_tLiu Song1-4/+4
Page index use pgoff_t to prevent risk of truncation. Signed-off-by: Liu Song <liu.song11@zte.com.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-27mtd: maps: physmap: Add minimal Runtime PM supportGeert Uytterhoeven1-5/+15
Add minimal runtime PM support (enable on probe, disable on remove), to ensure proper operation with a parent device that uses runtime PM. This is needed on systems where the FLASH is connected to a bus controller that is contained in a PM domain and/or has a gateable functional clock. In such cases, before accessing any device connected to the external bus, the PM domain must be powered up, and/or the functional clock must be enabled, which is typically handled through runtime PM by the bus controller driver. An example of this is the Renesas APE6-EVM development board, which has an Ethernet controller and a CFI FLASH connected to the Bus State Controller (BSC) of an R-Mobile APE6 SoC. As long as the Ethernet driver, which had Runtime PM support since commit 3a611e26e958b037 ("net/smsc911x: Add minimal runtime PM support"), keeps the BSC powered, accessing the FLASH works. When the ethernet node in r8a73a4-ape6evm.dts is disabled, the BSC is never powered up, and the kernel crashes when trying to access the FLASH: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 pgd = (ptrval) [00000000] *pgd=7fef2835 Internal error: : 1406 [#1] SMP ARM CPU: 0 PID: 122 Comm: hd Tainted: G W 5.5.0-rc1-ape6evm-00814-g38ca966db25b9dbd-dirty #136 Hardware name: Generic R8A73A4 (Flattened Device Tree) PC is at chip_ready+0x12c/0x380 LR is at chip_ready+0x10c/0x380 Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-27mtd: maps: pcmciamtd: fix possible sleep-in-atomic-context bugs in ↵Jia-Ju Bai1-4/+3
pcmciamtd_set_vpp() The driver may sleep while holding a spinlock. The function call path (from bottom to top) in Linux 4.19 is: drivers/pcmcia/pcmcia_resource.c, 312: mutex_lock in pcmcia_fixup_vpp drivers/mtd/maps/pcmciamtd.c, 309: pcmcia_fixup_vpp in pcmciamtd_set_vpp drivers/mtd/maps/pcmciamtd.c, 306: _raw_spin_lock_irqsave in pcmciamtd_set_vpp drivers/pcmcia/pcmcia_resource.c, 312: mutex_lock in pcmcia_fixup_vpp drivers/mtd/maps/pcmciamtd.c, 312: pcmcia_fixup_vpp in pcmciamtd_set_vpp drivers/mtd/maps/pcmciamtd.c, 306: _raw_spin_lock_irqsave in pcmciamtd_set_vp mutex_lock() may sleep at runtime. To fix these bugs, the spinlock is replaced with a mutex. These bugs are found by a static analysis tool STCheck written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand: Rename omap2 driver to avoid a build warningMiquel Raynal2-1/+1
As previously reported by Sudip Mukherjee for the Samsung driver, the omap2 onenand driver is called omap2.c in our directory and omap2.c in the tty/serial/ directory. If both drivers are compiled as modules, it would produce the following warning: warning: same module names found: drivers/tty/serial/omap2.ko drivers/mtd/nand/onenand/omap2.ko Rename the onenand omap2 driver so that it fits the folder's convention: onenand_omap2.c. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand: Use a better name for samsung driverMiquel Raynal2-1/+1
Commit 55ed51fff224 ("{tty: serial, nand: onenand}: samsung: rename to fix build warning") has changed the samsung.c driver to be samsung_mtd.c in order to avoid a conflict in module names with the tty driver. Since the *_mtd suffix is very undescriptive, rename it to onenand_samsung.c, following the folder's convention. Same will be applied to the omap2 onenand driver. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: rawnand: atmel: switch to using devm_fwnode_gpiod_get()Dmitry Torokhov1-10/+10
devm_fwnode_get_index_gpiod_from_child() is going away as the name is too unwieldy, let's switch to using the new devm_fwnode_gpiod_get(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: spinand: add support for Toshiba TC58CVG2S0HRAIJRobert Marko1-0/+10
Toshiba recently launched new revisions of their serial SLC NAND series. TC58CVG2S0HRAIJ is a refresh of previous series with minor improvements. Basic parameters are same so lets add support for this new revision. Datasheet: https://business.kioxia.com/info/docget.jsp?did=58601&prodName=TC58CVG2S0HRAIJ Tested under kernel 5.4.7. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: rawnand: macronix: Use match_string() helper to simplify the codeYueHaibing1-7/+4
match_string() returns the array index of a matching string. Use it instead of the open-coded implementation. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: sharpslpart: Fix unsigned comparison to zeroYueHaibing1-2/+2
The unsigned variable log_num is being assigned a return value from the call to sharpsl_nand_get_logical_num that can return -EINVAL. Detected using Coccinelle: ./drivers/mtd/parsers/sharpslpart.c:207:6-13: WARNING: Unsigned expression compared with zero: log_num > 0 Fixes: 8a4580e4d298 ("mtd: sharpslpart: Add sharpslpart partition parser") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand: Enable compile testing of OMAP and Samsung driversKrzysztof Kozlowski1-2/+2
OMAP and Samsung OneNAND drivers can be compile tested. The OMAP drivers still depends on mach header so limit the compile testing to ARMv7. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand: samsung: Fix printing format for size_t on 64-bitKrzysztof Kozlowski1-1/+1
Print size_t as %zu to fix -Wformat warnings when compiling on 64-bit platform (e.g. with COMPILE_TEST): drivers/mtd/nand/onenand/samsung_mtd.c: In function ‘s5pc110_read_bufferram’: drivers/mtd/nand/onenand/samsung_mtd.c:661:16: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t {aka long unsigned int}’ [-Wformat=] dev_err(dev, "Couldn't map a %d byte buffer for DMA\n", count); Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand: samsung: Fix pointer cast -Wpointer-to-int-cast warnings on 64 bitKrzysztof Kozlowski1-2/+2
iomem pointers should be casted to unsigned long to avoid -Wpointer-to-int-cast warnings when compiling on 64-bit platform (e.g. with COMPILE_TEST): drivers/mtd/nand/onenand/samsung_mtd.c: In function ‘s3c_onenand_readw’: drivers/mtd/nand/onenand/samsung_mtd.c:251:6: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] if ((unsigned int) addr < ONENAND_DATARAM && onenand->bootram_command) { ^ Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: rawnand: denali: remove hard-coded DENALI_DEFAULT_OOB_SKIP_BYTESMasahiro Yamada1-14/+7
As commit 0d55c668b218 (mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unset") says, there were three solutions discussed: [1] Add a DT property to specify the skipped bytes in OOB [2] Associate the preferred value with compatible [3] Hard-code the default value in the driver At that time, [3] was chosen because I did not have enough information about the other platforms than UniPhier. That commit also says "The preferred value may vary by platform. If so, please trade up to a different solution." My intention was to replace [3] with [2], not keep both [2] and [3]. Now that we have switched to [2] for SOCFPGA's SPARE_AREA_SKIP_BYTES=2, [3] should be removed. This should be OK because denali_pci.c just gets back to the original behavior. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: rawnand: denali_dt: add reset controllingMasahiro Yamada1-1/+39
According to the Denali NAND Flash Memory Controller User's Guide, this IP has two reset signals. rst_n: reset most of FFs in the controller core reg_rst_n: reset all FFs in the register interface, and in the initialization sequencer This commit supports controlling those reset signals. It is possible to control them separately from the IP point of view although they might be often tied up together in actual SoC integration. The IP spec says, asserting only the reg_rst_n without asserting rst_n will cause unpredictable behavior in the controller. So, the driver deasserts ->rst_reg and ->rst in this order. Another thing that should be kept in mind is the automated initialization sequence (a.k.a. 'bootstrap' process) is kicked off when reg_rst_n is deasserted. When the reset is deasserted, the controller issues a RESET command to the chip select 0, and attempts to read out the chip ID, and further more, ONFI parameters if it is an ONFI-compliant device. Then, the controller sets up the relevant registers based on the detected device parameters. This process might be useful for tiny boot firmware, but is redundant for Linux Kernel because nand_scan_ident() probes devices and sets up parameters accordingly. Rather, this hardware feature is annoying because it ends up with misdetection due to bugs. So, commit 0615e7ad5d52 ("mtd: nand: denali: remove Toshiba and Hynix specific fixup code") changed the driver to not rely on it. However, there is no way to prevent it from running. The IP provides the 'bootstrap_inhibit_init' port to suppress this sequence, but it is usually out of software control, and dependent on SoC implementation. As for the Socionext UniPhier platform, LD4 always enables it. For the later SoCs, the bootstrap sequence runs depending on the boot mode. I added usleep_range() to make the driver wait until the sequence finishes. Otherwise, the driver would fail to detect the chip due to the race between the driver and hardware-controlled sequence. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: rawnand: denali_dt: Add support for configuring SPARE_AREA_SKIP_BYTESMarek Vasut2-3/+15
The SPARE_AREA_SKIP_BYTES register is reset when the controller reset signal is toggled. Yet, this register must be configured to match the content of the NAND OOB area. The current default value is always set to 8 and is programmed into the hardware in case the hardware was not programmed before (e.g. in a bootloader) with a different value. This however does not work when the block is reset properly by Linux. On Altera SoCFPGA CycloneV, ArriaV and Arria10, which are the SoCFPGA platforms which support booting from NAND, the SPARE_AREA_SKIP_BYTES value must be set to 2. On Socionext Uniphier, the value is 8. This patch adds support for preconfiguring the default value and handles the special SoCFPGA case by setting the default to 2 on all SoCFPGA platforms, while retaining the original behavior and default value of 8 on all the other platforms. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> To: linux-mtd@lists.infradead.org Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: rawnand: denali_dt: error out if platform has no associated dataMasahiro Yamada1-5/+6
denali->ecc_caps is a mandatory parameter. If it were left unset, nand_ecc_choose_conf() would end up with NULL pointer access. So, every compatible must be associated with proper denali_dt_data. If of_device_get_match_data() returns NULL, let it fail immediately. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: rawnand: brcmnand: Set appropriate DMA maskFlorian Fainelli1-0/+10
NAND controllers >= 7.0 with FLASH_DMA support physical addresses up to 40-bit, set an appropriate DMA mask for that purpose. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand_base: Adjust indentation in onenand_read_ops_nolockNathan Chancellor1-41/+41
Clang warns: ../drivers/mtd/nand/onenand/onenand_base.c:1269:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] while (!ret) { ^ ../drivers/mtd/nand/onenand/onenand_base.c:1266:2: note: previous statement is here if (column + thislen > writesize) ^ 1 warning generated. This warning occurs because there is a space before the tab of the while loop. There are spaces at the beginning of a lot of the lines in this block, remove them so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: a8de85d55700 ("[MTD] OneNAND: Implement read-while-load") Link: https://github.com/ClangBuiltLinux/linux/issues/794 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: rawnand: mpc5121: Remove unneeded semicolonzhengbin1-1/+1
Fixes coccicheck warning: drivers/mtd/nand/raw/mpc5121_nfc.c:441:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand: samsung: remove set but not used variableChen Wandun1-2/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/mtd/nand/onenand/samsung_mtd.c: In function s3c_onenand_check_lock_status: drivers/mtd/nand/onenand/samsung_mtd.c:731:6: warning: variable tmp set but not used [-Wunused-but-set-variable] Signed-off-by: Chen Wandun <chenwandun@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-21mtd: onenand: Fix Kconfig indentationKrzysztof Kozlowski1-6/+6
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-20ubi: Fix an error pointer dereference in error handling codeDan Carpenter1-9/+12
If "seen_pebs = init_seen(ubi);" fails then "seen_pebs" is an error pointer and we try to kfree() it which results in an Oops. This patch re-arranges the error handling so now it only frees things which have been allocated successfully. Fixes: daef3dd1f0ae ("UBI: Fastmap: Add self check to detect absent PEBs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-19mtd: spi-nor: Add support for at25sl321Michael Walle1-0/+3
This was tested in single, dual and quad mode on a custom board with the NXP FlexSPI controller. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-01-19mtd: spi-nor: Add support for w25q32jwmMichael Walle1-0/+5
Add support for the Winbond W25Q32JW-xM flashes. These have a programmable QE bit. There is also the W25Q32JW-xQ variant which shares the ID with the W25Q32DW and W25Q32FW parts. The W25Q32JW-xQ has the QE bit hard strapped to 1, thus don't support the /HOLD and /WP pins. This was tested in single, dual and quad mode on a custom board with the NXP FlexSPI controller. Also the BP bits as well as the TB bit were tested. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-01-18mtd: rawnand: gpmi: Restore nfc timing setup after suspend/resumeEsben Haabendal1-0/+4
As we reset the GPMI block at resume, the timing parameters setup by a previous exec_op is lost. Rewriting GPMI timing registers on first exec_op after resume fixes the problem. Fixes: ef347c0cfd61 ("mtd: rawnand: gpmi: Implement exec_op") Cc: stable@vger.kernel.org Signed-off-by: Esben Haabendal <esben@geanix.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-18mtd: rawnand: gpmi: Fix suspend/resume problemEsben Haabendal1-1/+6
On system resume, the gpmi clock must be enabled before accessing gpmi block. Without this, resume causes something like [ 661.348790] gpmi_reset_block(5cbb0f7e): module reset timeout [ 661.348889] gpmi-nand 1806000.gpmi-nand: Error setting GPMI : -110 [ 661.348928] PM: dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -110 [ 661.348961] PM: Device 1806000.gpmi-nand failed to resume: error -110 Fixes: ef347c0cfd61 ("mtd: rawnand: gpmi: Implement exec_op") Cc: stable@vger.kernel.org Signed-off-by: Esben Haabendal <esben@geanix.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-18mtd: spi-nor: Fix quad enable for Spansion like flashesMichael Walle1-0/+2
The commit 7b678c69c0ca ("mtd: spi-nor: Merge spansion Quad Enable methods") forgot to actually set the QE bit in some cases. Thus this breaks quad mode accesses to flashes which support readback of the status register-2. Fix it. Fixes: 7b678c69c0ca ("mtd: spi-nor: Merge spansion Quad Enable methods") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-18mtd: spi-nor: Fix selection of 4-byte addressing opcodes on SpansionVignesh Raghavendra1-3/+1
mtd->size is still unassigned when running spansion_post_sfdp_fixups() hook, therefore use nor->params.size to determine the size of flash device. This makes sure that 4-byte addressing opcodes are used on Spansion flashes that are larger than 16MiB and don't have SFDP 4BAIT table populated. Fixes: 92094ebc385e ("mtd: spi-nor: Add spansion_post_sfdp_fixups()") Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-17ubi: Free the normal volumes in error paths of ubi_attach_mtd_dev()Hou Tao4-14/+30
The allocated normal volumes saved in ubi->volumes are not freed in the error paths in ubi_attach_mtd_dev() and its callees (e.g. ubi_attach() and ubi_read_volume_table()). These normal volumes should be freed through kill_volumes() and vol_release(), but ubi_attach_mtd_dev() may fail before calling uif_init(), and there will be memory leaks. So adding a new helper ubi_free_all_volumes() to free the normal and the internal volumes. And in order to prevent double-free of volume, reset ubi->volumes[i] to NULL after freeing. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-17ubi: Check the presence of volume before call ubi_fastmap_destroy_checkmap()Hou Tao1-0/+2
Else there may be oops when fastmap is enabled and init_volumes() fails. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-17ubi: wl: Remove set but not used variable 'prev_e'YueHaibing1-2/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/mtd/ubi/wl.c: In function 'find_wl_entry': drivers/mtd/ubi/wl.c:322:27: warning: variable 'prev_e' set but not used [-Wunused-but-set-variable] It's not used any more now, so remove it. Fixes: f9c34bb52997 ("ubi: Fix producing anchor PEBs") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-17ubi: fastmap: Fix inverted logic in seen selfcheckSascha Hauer1-1/+1
set_seen() sets the bit corresponding to the PEB number in the bitmap, so when self_check_seen() wants to find PEBs that haven't been seen we have to print the PEBs that have their bit cleared, not the ones which have it set. Fixes: 5d71afb00840 ("ubi: Use bitmaps in Fastmap self-check code") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-14mtd: spi-nor: remove unused enum spi_nor_opsMichael Walle4-24/+24
The ops aren't used in any SPI NOR controller. Therefore, remove them altogether. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-01-13mtd: spi-nor: intel-spi: Add support for Intel Comet Lake-V SPI serial flashMika Westerberg1-0/+1
Intel Comet Lake-V has the same SPI serial flash controller as Kaby Lake. Add Comet Lake-V PCI ID to the driver list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-01-10mtd: spi-nor: hisi-sfc: Try to provide some clarity on which SFC we areJohn Garry2-3/+3
The driver is for the HiSilicon FMC (Flash Memory Controller), which supports SPI NOR in addition other memory technologies, like SPI NAND. Indeed, the naming in the driver is a little inappropriate, especially considering that there is already another HiSilicon SPI NOR flash controller (which I believe the FMC is derived from). Since we now want to provide software support for this other HiSilicon controller, update code comments to at least try to make it clear that this driver is for the FMC. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-01-10mtd: spi-nor: Add support for sst26vf016bJoseph Kust1-0/+2
Adds support for sst26vf016b, a smaller variant of the sst26vf064b. Tested on a sama5d3 SOC using the atmel,at91rm9200-spi controller. The dual read could not be tested. SPI_NOR_QUAD_READ is not added because it requires that the IOC bit from the Configuration Register to be set to 1, which is not the case: its default value at power-up is zero and we don't set it to one in spi-nor either. Signed-off-by: Joseph Kust <joseph.kust@rockwellcollins.com> Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com> [tudor.ambarus@microchip.com: Drop quad read flag, amend commit description] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-01-09mtd: spi-nor: Fix the writing of the Status Register on micron flashesTudor Ambarus1-0/+1
Micron flashes do not support 16 bit writes on the Status Register. According to micron datasheets, when using the Write Status Register (01h) command, the chip select should be driven LOW and held LOW until the eighth bit of the last data byte has been latched in, after which it must be driven HIGH. If CS is not driven HIGH, the command is not executed, flag status register error bits are not set, and the write enable latch remains set to 1. This fixes the lock operations on micron flashes. Reported-by: John Garry <john.garry@huawei.com> Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: John Garry <john.garry@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-09mtd: sm_ftl: fix NULL pointer warningArnd Bergmann1-1/+2
With gcc -O3, we get a new warning: In file included from arch/arm64/include/asm/processor.h:28, from drivers/mtd/sm_ftl.c:8: In function 'memset', inlined from 'sm_read_sector.constprop' at drivers/mtd/sm_ftl.c:250:3: include/linux/string.h:411:9: error: argument 1 null where non-null expected [-Werror=nonnull] return __builtin_memset(p, c, size); >From all I can tell, this cannot happen (the function is called either with a NULL buffer or with a -1 block number but not both), but adding a check makes it more robust and avoids the warning. Fixes: mmtom ("init/Kconfig: enable -O3 for all arches") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-09mtd: onenand: omap2: Pass correct flags for prep_dma_memcpyPeter Ujfalusi1-1/+2
The commit converting the driver to DMAengine was missing the flags for the memcpy prepare call. It went unnoticed since the omap-dma driver was ignoring them. Fixes: 3ed6a4d1de2c5 (" mtd: onenand: omap2: Convert to use dmaengine for memcp") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-09mtd: onenand: samsung: Fix iomem access with regular memcpyKrzysztof Kozlowski1-4/+4
The __iomem memory should be copied with memcpy_fromio. This fixes Sparse warnings like: drivers/mtd/nand/onenand/samsung_mtd.c:678:40: warning: incorrect type in argument 2 (different address spaces) drivers/mtd/nand/onenand/samsung_mtd.c:678:40: expected void const *from drivers/mtd/nand/onenand/samsung_mtd.c:678:40: got void [noderef] <asn:2> *[assigned] p drivers/mtd/nand/onenand/samsung_mtd.c:679:19: warning: incorrect type in assignment (different address spaces) drivers/mtd/nand/onenand/samsung_mtd.c:679:19: expected void [noderef] <asn:2> *[assigned] p drivers/mtd/nand/onenand/samsung_mtd.c:679:19: got unsigned char * Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-09mtd: onenand: omap2: Fix errors in styleAmir Mahdi Ghorbanian2-12/+13
Correct mispelling, spacing, and coding style flaws caught by checkpatch.pl script in the Omap2 Onenand driver . Signed-off-by: Amir Mahdi Ghorbanian <indigoomega021@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-09mtd: cadence: Fix cast to pointer from integer of different size warningVasyl Gomonovych1-7/+6
Use dma_addr_t type to pass memory address and control data in DMA descriptor fields memory_pointer and ctrl_data_ptr To fix warning: cast to pointer from integer of different size Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>